Nasty MOTU MSI / Modulation problem - please help!!

OK, I've searched high and low for a solution to this, but no joy, so here goes...
For weeks now, I've had an issue with MOTU's Symphonic Instrument.
Parts recorded with it play back distorted if the active track in Logic's arrange window is not the one the plug-in is on.
The 'distortion' is in actual fact the MSI playing back as if the modwheel is full on. It sounds like a very fast square-wave gate. Whipping the wheel back and forth back to zero while the MSI track is active will temporarily cure the problem, but as soon as you change tracks, it's back. It doesn't make any difference whether the plug-in is configured in single-channel or multitimbral mode.
I've also had the same thing happen with Absynth, which suggests it might be more something to do with the way Logic handles CC#1 data from the Korg Kontrol 49. There are a number of reports about the buggy implementation of CC#1 on this controller, but they mainly concern it being used in Native Mode, which I don't use, as I need a working modwheel. Swapping the Korg out for a Roland PC300 keyboard controller had no effect in any case.
It may have been caused by CC#1 events lurking around in the MIDI parts... some of them were originally recorded with Garritan Personal Orchestra, which uses the modwheel as a volume control. However, I couldn't find any such events, and although I might have got nearer to figuring out what's causing the problem, I can't get it to stop doing it.
Inserting "CC#1 = 0" messages into the part's event list doesn't help.
Recording modwheel resets on the same track doesn't help.
Turning on the "Chase Controllers" preference doesn't help.
Using a different controller keyboard doesn't help.
Setting fire to the computer doesn't help.
I am unable to perform the 1.1.1 update for MSI, so that doesn't help. The plug-in crashes Logic's validation with a "Fatal Error." This results in it being greyed out in the AU Manager list, and I am therefore unable to enable it manually. I'm currently swapping emails with MOTU tech support about this.
If anyone can help resolve this while I still have some hair left to tear out, there's at least 3 pints of strong beer in it for them....
G5 2GHz, 8GB RAM Mac OS X (10.3.5) Logic Pro 7.1.0, MSI 1.0.0, MOTU 828mkII, Korg Kontrol 49, bad headache...

I would say do figure out how to make the upgrade first and foremost. A lot was done in that upgrade, and one may have been to fix this bug.
As for cc data, have you checked the track automation for the track with MSI? I know it's an obvious question, but if there's ghost data it will show up there.

Similar Messages

Service Module Problem -- Please Help!

Greetings,
I simply cannot get iTunes to recognize my iPod. I am running iTunes 7.1.1 and Windows XP. I have tried every suggestion at the Apple website, and nothing works. Instead I get the message "IPod Service Module has encountered a problem and needs to close." I have even gone so far as to uninstall 7.1.1 and reinstall 6.0.5, and that didn't work either.
Going through this and other forums, the only suggestion I have seen that I haven't tried is reinstalling Windows. That seems like an extreme measure, and I would rather try something less drastic.
If any Apple employees are reading this, I love my iPod. It's a great toy. But, this is an extremely frustrating problem, and I know I'm not the only one who's had it. Can you guys possibly fix this issue(s) in the next iTunes release?
Thanks for any and all help,
Jason
5th generation IPod -- 55G Windows XP

we'll get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

MSI R4850 PROBLEM - PLEASE HELP FAST (UPDATED) :S

I install my new PC and what do you know, there are exclamation marks on the POST and BIOS screens replacing some parts of the background... But when windows starts everything looks fine. I can watch movies and there is no problem. But then I saw this in the VGA driver tab:
So I install a few games, and it is similar to that picture. The whole screen is covered with little squares on some spots and there seems to be faulty graphics.
While playing a map in Warcraft, not only the graphics was like this, but every now and then the screen would freeze, go black and return to the same bad graphics. Also after 5 minutes it gave me a BSOD.
I have the latest ati grafics drivers, and I tried replacing the 4850 with my old video card, an MSI Nvidia N7800GT and these problems are not present with that card, so it has to be the a problem with the 4850.
So what is wrong with the VGA? Is it some hardware fault? What should I do?
My system (only a day old):
MSI P45 Platinum (Zilent) BIOS v1.0
Intel Core 2 Duo E8300
A-DATA Vitesta 1066+ 2x1GB
MSI R4850
1XWD RAPTOR 74GB
1XWD CAVIAR 200GB
1XWD CAVIAR 500GB
1XSAMSUNG SATA DVDRW 22x
PSU: Cooler Master Real Power M520
HANNS-G HI221DP (22" Widescreen connected with DVI-D Single Link Cable)

OK, so I tested the VGA in another system. And as it started it showed the exclamation marks in post again. Then I installed the drivers and i restarted, and the exclamation marks were gone. Then tested games, Warcraft and Crysis and everything works splendid. This was on my friend's PC which is:
MB ASUS P5Q Updated to Latest BIOS
PQI DDR2 800MHz 2GB
CPU Intel Core 2 Quad Q6700
HDD 320GB Hitachi 16MB cache @ SATA2
Windows XP PRO x86
So the VGA is ok here, but doesn't work fine on my system. Any ideas?
EDIT: Updated BIOS version to 1.4 and the problem persists... some help pleaseee!

MSI Bundle problem (please help)

I need your help. We have zenworks 10.3.3. I made a msi install bundle and bundle installs normaly, but remains pending. I checked the msi log and it says that it installed correctly. Last line is MainEngineThread is returning 0. Why Zenworks dont realise that the bundle installed correctly, what am i missing???
Benny

The fact status updates for other bundles, seems to eliminate the Status
Roll-up as the root cause.
Perhaps Reboot the Device?
Maybe ZCM thinks the install is not yet complete?
If you try to manually launch the bundle again, does it reinstall?
If so that would tend to indicate ZCM thinks its not installed.
On 7/26/2011 11:16 AM, Benius wrote:
>
> Thank you for your answer. When I made a bundle that just deletes one
> file, it worked fine, this only happens with a msi (pending until I
> remove the assignement). Also when I watch the ZENworks Progress window
> it says installation completed. I know it is very difficult to help in
> this kind of situations, but any tips on what to check?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

MSI 645 ultra xp / 2000 problem please help.

I've got 3 MSI 645 ultra mobos. I've tried every thing i can think off to get xp installed and working. I don't get as far as formating the hard disk in the setup. I relpaced the power supply with a qtec 550 watt power supply (the gold one). i've flashed the bios to 1.9, i've used different hardisks and cables. I've checked the memory PC2100 and 2700. It's a pentium 4 1.5, I've tried a 2g in it as well. I'm using an ATI radeon 7500 but have tried a s3 agp card. All the other components work fine in another machine but not on my 3 MSI boards.
Please help some one out there must have had the same problem. I'll buy the first person who fixes it cakes!!!
Ta
Gus

Hi,
I ran memtest 3.0 and there were no errors. it ran for 9 hours.
I am only using one hard disk at a time. it's set as a master on IDE1 and the CDrom is on IDE2 as a master. should I use cable select?? I also tried the hard disk and CD on ide2 and that did not work either.
Ta

P6N Lots of problems please help

P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.

please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

System D.O.T automatically why? problem please help me

hello everybody,
please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
MSI CD ROM
SONY FLOPPY
COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
AMI BIOS 3.4
SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !

Hi,
Go to here for MSI LIVEUPDATE
http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
Install and run program.........
BIOS problems:
http://www.msi.com.tw/html/support/bios/note/boot.htm
If you would like to download bios and install........
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
You can also choose 3.7 if wish too first.....
I am sure this will help you.
Del

990fxa gd80 raid 0 problem please help me i am begging you

so i will start with my set up
990fxa dg80 mb
fx 8350 cpu
780ti
8 gig of ram
256 hdd
2x samsung 850 evo
750 hybrid drive
So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for help

I..have a few questions...
1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
3. Is your Win7 64 bit or 32 bit?
4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
And make sure you get the driver from here:
http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you...

Nasty MOTU MSI / Modulation problem - please help!!

Similar Messages

Maybe you are looking for