NAT firewall in Time Capsule and config via AirPort Utility

I just checked the firewall on my Time Capsule via http://www.grc.com/ and it failed on the "All Service Ports" test with "Stealth" on the following ports:
135/epmap : DCE end point resolution
139/netbios-ssn : NetBIOS Session Service
445/microsoft-ds : Microsoft Directory Service
593/http-rpc-epmap : HTTP RPC Ep Map
I'm sure this isn't a major security violation but having looked at AirPort Utility v 5.3.2 (Under; Advanced --> Port Mapping/IPv6) I can't see any useful options to increase the security of the firewall by blocking the above ports.
Having looked at the help page for AirPort Utility: "Customizing the IPv6 firewall" I'm confused because it refers to a "IPv6 Firewall" tab under the advanced settings in AirPort Utility that does not appear on my screen (i.e. 'Allow Teredo tunnels' etc).
Has anyone managed to setup Time Capsule so that it passes the above 'Shields Up' test? I'd be interested if they could post some instructions here.

Hi, I don't think you read my post properly. I'm not asking for 'stealthing' support. I'm complaining about the fact that the Time Capsule fails security tests when the ports I list are probed.
It's possible that I did ... and if so, I apologize. I assumed that when you stated "... it failed on the "All Service Ports" test with "Stealth"", you were referring to the desired outcome to have the Time Capsule respond with a status of "Stealth" for all ports tested.
Note that all the other ports that I've not listed passed the test (Time Capsule did not respond to probes) and I just want to configure the same behavior for these failing ports.
Again, if you want the Time Capsule to respond to the GRC tests with "Stealth" this may not be achievable. The AirPorts do not have an option to close individual ports or control their status when responding to tests like these that I'm aware of ... at least not natively through the AirPort Utility.
You may find the following blog an interesting read: Just how important is it to be stealthy on the 'Net?. I offer it only as an alternate opinion to GRC's stance on the topic.

Similar Messages

Time Capsule not Showing in Airport Utility

I decided to re-set my Time Capsule this afternoon. The green light is on but it is not showing in the Airport Utility and Time Machine says there is no back up disc available.
What can I do?

Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Restart both your Mac and the Time Capsule and then open AirPort Utility to see if your Time Capsule has been found.
If the Time Capsule is still lost, disconnect the Ethernet cable and perform a Factory Default Reset on the Time Capsule as follows:
Pulll the power cord from the back of the Time Capsule
Wait a few minutes
Hold in the reset button and keep holding it in while you plug the power cord back in to the Time Capsule
Keep holding the reset button an additional 8-10 seconds and then release the button
Allow 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
Connect the spare Ethernet cable from your computer to one of the LAN <-> ports and open AirPort Utility to reconfigure the device

HT201577 I changed the network name on my time capsule and lost my airport express...how do I get it back?

I changed the network name of my time capsule and lost my airport express in the process.... I have tried all of the resets (soft/hard/factory default) suggested in other answers to people but cannot locate the network of my airport express. It just keeps flashing amber. I want to add it back to my time capsule to extend my network as it was before I reset the name. HELP

Which model of AirPort Express do you have?
If you are not sure, the model number is on the side or bottom of the Express. Hard to see.....you may need a magnifying glass. The model number starts with an "A" followed by four numbers.
Post back with that info.......if you want to get the Express set up again to work with the Time Capsule.
You do have another option as well, although you will have to think in reverse on this one.
Change the network name back to the original name on the Time Capsule, so the Express will work correctly on the network.
Now, change the network name on the AirPort Express. It will be blinking amber when you do this, so power it off.
Then, change the network name on the Time Capsule and let it restart.
Now, power up the AirPort Express and it will join up with the Time Capsule network since you have already programmed it with that information.

Why did I see many airport and time capsule devices in iPhones AirPort Utility?

I had this problem with my Airport utility that I saw three devices(an AirPort Express and Time Capsule and my own AiPort Express) in my airport utility for iPhone. Were they connected to my wifi network which was created by my own AirPort Express? There were two devices that I think shouldn't have been there. I changed my AirPort Express from bridge mode to DHCP and NAT. Those two other devices disappeared. Could other people somehow have used my wifi network and extended it? It was password protected.

I had this problem with my Airport utility that I saw three devices(an AirPort Express and Time Capsule and my own AiPort Express) in my airport utility for iPhone. Were they connected to my wifi network which was created by my own AirPort Express? There were two devices that I think shouldn't have been there. I changed my AirPort Express from bridge mode to DHCP and NAT. Those two other devices disappeared. Could other people somehow have used my wifi network and extended it? It was password protected.

Would like my macbook pro to only connect to time capsule and not to airport express that is extending network. Is there a way to do this?

I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?

You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

Can't get Time Capsule to appear in AirPort Utility

Have been mucking with my new Time Capsule and somewhere during that process have done something which is preventing Time Capsule from appearing in my AirPort utility which is frustrating as **** cause now I can't change any of its settings.
I'm within range. Have attempted to connect via wireless and ethernet. Have turned on and off several times. Have reset it with the pin hole at the back.
The wireless network it is currently configured to host will appear after a reset in my wireless menu. But will still not appear in AirPort utility.
How do I get Time Capsule to re appear in AirPort utility so that I can properly configure it.

Have you followed the steps on page 30 of your TC Setup Guide?
Did you do a factory reset?

Help! Time Capsule set up help: Airport Utility not cooperating

Hi Everyone,
I'm desperate for help with this issue. I have a Time Capsule, Base Station and Airport Express (all previous generation)at different points throughout the house. At first the issue was with the base station that refused to find my network so I called the helpdesk and got it fixed and all was well until the next day when the Time Capsule and Airport Express began to malfunction.
While everything connected to the network fine, our iphones couldn't find the network while downstairs. I tried to fix the issue but then I realized that while the base station wireless mode said 'extend network' the time capsule and airport express wireless mode said 'join network.'
I believed I overdid it on hitting the time capsule's reset button for a soft reset one too many times and now the slow flicker amber light will not steady itself or move to green and the computer is unable to successfully attach itself to our network. I've tried to restore the factory default settings but this only results in an error message 'there was an error trying to detect apple wireless devices, make sure network connection is valid and try again.'
All computers and phones have been updated with current firmwares etc. At this point, I'm stressed because I rely heavily on the internet for school and research and I don't know what else to do. Should I do a hard reset or just contact apple support?
Thanks,
Michelle

Trinifoto wrote:
I have a Time Capsule, Base Station and Airport Express
Welcome to Apple's discussion groups.
Please identify the "Base Station". Do you mean an AirPort Extreme Base Station? Are all those 802.11n-capable devices?
the base station wireless mode said 'extend network' the time capsule and airport express wireless mode said 'join network.'
That suggests to me that none of those devices is your "primary" router. If that's the case, what is the brand and model of the device that's connected to your Internet feed or Internet modem?
I believed I overdid it on hitting the time capsule's reset button for a soft reset one too many times and now the slow flicker amber light will not steady itself or move to green and the computer is unable to successfully attach itself to our network.
What does AirPort Utility say about the status of the Time Capsule? (If you have trouble connecting to the Time Capsule with AirPort Utility, try plugging an Ethernet cable from a LAN port of the Time Capsule to the Ethernet port of your MacBook Pro.)
I've tried to restore the factory default settings but this only results in an error message 'there was an error trying to detect apple wireless devices, make sure network connection is valid and try again.'
Did you do that reset by holding in the reset button until the status light flashed rapidly several times? Normally after a reset, you have to select the network for that device (usually named in the form "Apple Network xxxxxx") for AirPort Utility to "see" it. That's why an Ethernet cable can be useful.

Time capsule not showing in airport utility? recently moved house and new internet set up!

Hi
I had a time capsule set up and working perfectly then we moved house, changed ISP and now time capsule light is flashing amber. When I open the Airport Utility only the internet (i.e. a globe) shows, no time capsule. My Macbook Pro has no ethernet port or I would have tried hardwiring! I can enter the time machine but back up history is red.
I read that latest OS may require a rename of the capsule if the original name was long (29 characters including spaces at present) but to change it the support says to access it via the airport utiltiy which I can't do!
Help anyone?!
Sam

Simply factory reset the TC and start over.
Any time you move the network configuration the TC will require a new configuration.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Loaded Mountain Lion and time capsule no longer works, airport utility can't be configured, back ups have stopped, sparse bundle in use errors occur, what a mess!!!!

Should Airport Utility now be defunct for my time capsule because I have upgraded OS to Mountain Lion? I have tried every fix I can think of but AU will not set up. I'm also getting repeated time machine back up failures and now I have a new "sparsebundleinuse" error which is totally useless to me, I have no idea what a sparse bundle is, I have no idea what it's suddenly being used by and there's no information to say what to do about it. Apple is killing me here!!!

I've tried to but on the install for Airport Utility 6, after the download I get through the introduction then the license then I get "airport utility can't be installed on this disk. The version of Mac OS X on this volume is not supported" and that's it, no more options!?

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

Time Capsule not found in airport utility

I have a 2nd gen time capsule that is having some difficulties. It seems like it has been since the latest (7.6.1) update.
After a while, my wireless clients cannot connect to it, and it won't show up in the AirPort utility. If I power cycle it, it shows up again, and clients can connect.
When it isn't listed, the light on it is still green.
It ALSO seems that the time machine can back up to it still .
Any ideas?

It may help to power cycle the entire network if you have not already done so. This will get everything back in the right sequence on your network.
Just power everything off in any order that you want
Wait a minute or two
Start the modem first and let it run a minute by itself
Start the next device connected to the modem the same way
Keep starting devices one at a time a minute apart until everything is powered back up

Time capsule not appearing in airport utility

I'm trying to connect my Time Machine to my Sagecom F@st 2864 wireless router to use it in time machine. However, airport utility does not see the time machine. What's weird is that when I brought it in to the apple store it appeared to work.
Any ideas? I tried connecting it through both the WAN and LAN ports in the router and both don't work

AirPort Utility only works with Apple devices. Using that device with Time Machine is unsupported and should be expected to result in total data loss eventually.
Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
If you're determined to use the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.)

Time Capsule not responding in Airport Utility on setup after hard reset.

I have been trying to set up my Time Capsule after a hard reset.
I am seeing the Time Capsule in Airport utility with default settings, however when I choose continue to setup or manual setup it tells me I need to switch networks to continue and then gives me the following message.
BASE STATION ERROR: AirPort Utility was unable to find your Apple wireless device.
The Time Capsule continues to work as a hub for devices connected to it but I am unable to see the hard disk or use the wireless functions. Any ideas?

Thank you. The computer is connected directly to the time capsule through ethernet and giving me those messages. I have tried resetting a couple of times to no avail. I guess I am starting to wonder if I have a problem with the Time Capsule which is only a year and a half old. As I mentioned I have number of devices connected through the LAN ports and they are all working fine. It is only the functionality of wirless and the hard disk that appears to be compromised.
Message was edited by: newkindofsoup
Message was edited by: newkindofsoup

Time capsule not located on airport utility!

I changed my house, so i had to install new internet system. I changed the settings on my time capsule. And i clicked forget this network. I think i made a mistake there. But my mac can find airport disk drive but airport utility can't track base station. Can anyone help?

Plug it in by ethernet and press the reset button on the TC.. until the front led flashes rapidly.. redo the setup.
If you are on Lion make sure you use 5.6 utility.
http://support.apple.com/kb/DL1482
For air you can use the USB to ethernet adapter.. if you don't have another computer.

NAT firewall in Time Capsule and config via AirPort Utility

Similar Messages

Maybe you are looking for