Nat tunnel for SIP closing after 933 seconds.

Hello.
We have a OS X Server 10.6.8 that acts as a nat gateway and firewall to our network. Through it I have opened tunnels to an IPECS ip-telephone system, everything works fine, except that it appears to close tunnels after 933 seconds. So, if I have an active call it will terminate after exactly 933 seconds. I cannot find anything in any log or anywhere in the documentation to explain this behaviour.
Any help or confirmation of this behaviour would be greatly appreciated.

Hi Inventica,
Can you please get a SIP debug capture of this event happening?
The following command is dangerous and should only be run for a short period of time as it can crash the system from overloading it, but it will be very helpful in assisting with the diagnosis.
Step-1:
Turn monitoring on the terminal "term mon" if you are using a console cable it is on automatically
Step-2:
debug CCSIP all
The above is what will crash the system if you leave it on too long, do no more than say 2-3 calls, also make sure putty has at least 2000000 lines in the settings so that way you can copy all to clipboard and post it in a text file.
Once you have this captured in a text file, please upload that file up here so we can see it
Cheers,
David Trad.

Similar Messages

IN MY IPAD WHEN I OPEN SAFARI IT OPENS AND THEN GET CLOSED AFTER 2 SECONDS.

IN MY IPAD WHEN I OPEN SAFARI IT OPENS AND THEN AUTOMATICALLY GET CLOSED AFTER 2 SECONDS.I TRIED EVERYTHING EXCEPT RESTORING.

We're sorry to hear that Firefox is crashing when you open it. Please do the following to give us crash IDs that will help us understand more about the crash.
#'''(OS X 10.6 or previous)''' Click the '''Finder''' icon in the dock. Your home folder will be selected. In the right side of the window, click the Library folder to open it. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.<br>'''(OS X 10.7 or above)''' Click the '''Finder''' icon in the dock. On the menu bar, click the '''Go''' menu, hold down the '''option''' or '''alt''' key and select '''Library'''. A window will open containing your Library folder. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.
#Open the 5 most recent files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

When I open my apps on my iPhone 5s it is closing after 5 seconds?

When I am opening my apps on my i Phone 5s they are closing after 5 seconds. Apps like facebook, Email, Watsapp and alot more, I can't even delete pictures because they app is only closing when i try to delete them. Please i need help!!!

There is no need to reinstall the apps, that is simply a waste of time.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Acrord32info.exe closed after 30 seconds

Hello
when i open a pdf file in IE, a plugin of adobe (acrord32info) is loaded and when i close the pdf file in IE,
the plugin (acrord32info) is killed after 30 seconds.
i have to open a lot of pdf file and i lost 3 seconds each time to load the plugin because the delay between
each open is more than 30 secondes (about 1 minute).
is it possible to increase this delay to kill this plugin (after 5 minutes for example) ?
thanks

Repost your question in the iPhoto area, where the iPhoto gurus will get you sorted out quickly.
https://discussions.apple.com/community/ilife/iphoto
MBP

Acrobat X keeps closing after 10 seconds

Acrobat XI won't let me link videos anymore so I reinstalled Acrobat X. I uninstalled XI, but now X won't stay open more than 10 seconds. Anyone know how to fix this issue?

Hi davida43733292,
Could you please let me know what version of OS are you using.
Does Acrobat closes itself after few seconds or the PDFs?
Do you get any specific error message when it unexpectedly quits? What is it?
Let me know so that I can analyze where exactly the problem is.
Regards,
Anubha

Help understaning NAT table for SIP

Hi Folks,
I've been battling SIP and NAT for nearly 3 months now I've got to the point where I think I may well have found a bug in IOS. Incoming calls are not getting to my CME, outbound calls are fine. The sip-ua is registered fine.
2611xm-1#show sip-ua register status
Line                              peer        expires(sec) registered
================================ ========== ============ ==========
01xxxxx8882                       -1          86            yes
Without a static route, the NAT translation table on the 877 that connects to the internet looks like this:
877va-1#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
udp 82.70.85.118:1024 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
No incoming calls come through, but looking at the table, I understand why as the ITSP is routing calls to ports 5060, not 1024.
With this static route:
ip nat inside source static udp 192.168.1.254 5060 82.70.85.118 5060 extendable
The table looks like this:
877va-1#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
udp 82.70.85.118:5060 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
udp 82.70.85.118:5060 192.168.1.254:5060 ---                ---
Incoming calls come through, which makes sense as the port is now open!
If I delete the static route, clear the translation table and re-register the sip-ua the table looks like this:
877va-1#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
udp 82.70.85.118:5060 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
Calls come through for around 12 hours (probably until something times out and the sip-ua re-registers to the first scenario on port 1024).
Why is the 877 setting up the translation to port 1024 - what can I do to fix this?
My 877 settings are:
no ip nat service sip udp port 5060
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 192.168.2.0 255.255.255.0 192.168.1.254
My CME SIP settings are:
sip-ua
credentials username 01xxxxx8882 password xxxxxxxxxxxxxxxxxxx realm voip.zen.co.uk
authentication username 01xxxxx8882 password 7 xxxxxxxxxxxxxxxxxxxxxxxxx
nat symmetric role active
nat symmetric check-media-src
retry invite 3
retry register 10
timers register 150
registrar dns:voip.zen.co.uk expires 120
sip-server dns:voip.zen.co.uk
connection-reuse
host-registrar
permit hostname dns:voip.zen.co.uk
permit hostname dns:asterisk01.voip.zen.co.uk
permit hostname dns:asterisk02.voip.zen.co.uk

Thanks fo thre reply Daniele.
IOS is 15.3(3)M, but I've updated this today from an ealier version hoping to fix the problem.
If I do the following:
877va-1#show ip nat translations | include 5060
udp 82.70.85.118:1029 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
877va-1#clear ip nat trans
877va-1#clear ip nat translation *
877va-1#clear ip nat statistics
Then on the CME box, re-register the sip-ua.
877va-1#show ip nat translations | include 5060
udp 82.70.85.118:1030 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
It takes the next port. Its never using 5060 in the first place from what I can tell

When I open mail on my iPad it's closing after two seconds...

Does anybody know what's going on with that?
What's the fix?

Try this:
• Turn the iPad off and on again (hold the sleep/wake button for about 3 seconds until a red slider appears with the label "slide to power off")
• If it din't help, try a hard reset - hold the sleep/wake button and the home button simultaneously for about 6 seconds, until the iPad tunes off. Then turn it on again.
• Go to "Settings - General - Reset" and choose "Reset All Settings"
• Remove the Mail accounts (one by one) and check again, if it is fine then try to install again.
By the way, don't forget to mark the helpful answers in the tread as solved/answered (if so), that will help other users to find a solution to their questions quickly…
enjoy your magic machine

Acrobat is closing after 8 seconds

Acrobat Pro and Reader will only stay open for 8 seconds or less. Which is fine if you're riding a bull but for reading documents not to great. I downloaded and ran the license fix three times following the directions for rebooting in between and it still doesn't work.
Need this resolved asap.
Thanks,

You need to provide system information! The blindfold guess would be that a security tool is shutting down anything to do with PDF because they are "evil" as per the virus scanner's or whatever logic, but without any more info nobody can be halfway certain...
Mylenium

I can't update my ipod. When I check for updates it says "can't connect to server"(despite internet connection being fine). Also, when I try and update software it starts then stops after 2 seconds

I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Cannot launch LR. Photoshop crashes after few seconds. How can i fix this? Thx for help

Cannot launch LR. Photoshop crashes after few seconds. How can i fix this? Thx for help

Hi members & mvp's
I face same problem, after creating Adobe ID and after installing Creative Cloud app, the installed Ps and Lr can't be launched... Lr at all, no action, but Ps works for a few seconds. I could achieve "system info" from help menu as follows:
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 1895 MHz
Built-in memory: 3990 MB
Free memory: 1477 MB
Memory available to Photoshop: 3303 MB
Memory used by Photoshop: 70 %
I guess my PC is powered enough, but I'm afraid other trial versions and registry rubbish are locking CC server communication. Do you know some tool to clean up previous installation of Adobe products?
Thanks in advance!
Jose

Xbootmgr Gave up waiting for Win7RTM physical prefetcher after 300 seconds.

Hello,
I have a problem with slow boot on a Windows 7 x64.
It boots in 5 min.
I have discovered an error regarding ReadyBoot log size and maked it unlimited.
I've then installed Windows Performance Toolkit and attempted to do a prepSystem.
It failed with:
Waiting for prefetcher...
Gave up waiting for Win7RTM physical prefetcher after 300 seconds.
I've attempted to do a boot trace without prepSystem. It also failed.
After google search I've noticed a problem with many system restore points.
I've made a fresh system restore point and deleted the rest.
This caused trace1.fx file to appear in ReadyBoot directory.
I've also did a Rundll32.exe advapi32.dll,ProcessIdleTasks which performed a defrag /B c: and caused Layout.ini to appear in Prefetch directory.
After all this xbootmgr -trace boot -numruns 6 -traceflags Diag+FileIO+ResidentSet+ReferenceSet -postBootDelay 300 -verboseReadyBoot worked without waiting for prefetcher error.
But xbootmgr -trace boot -prepSystem -verboseReadyBoot wiped Layout.ini and ReadyBoot directory and failed with waiting for prefetcher.
I've found KB2728738,KB2732673,KB2878378,KB2775511 fixes might apply to this but they were not fully tested by Microsoft and not released for Windows Update. Also I have only one restore point and did a sfc /scannow and boot trace without prepsystem works!
Do you have any suggestion what to try to make this work?
My HDDs speeds are cca. 100 MB/s serial and 50 MB/s random access.
I have avast antivirus, skype, adobe reader, flash player, google chrome, nvidia backend and raid service, matlab accelerator, a few apple tasks, and creative (soundblaster) tasks but they don't take too much to run.
5 min to boot are too long.
I've also accidentally discovered that scripts put in Startup folder for a user with common folders redirected to another drive don't get launched.

Refer the link. This link may help you to resolve the issue.
http://social.msdn.microsoft.com/Forums/en-US/447f8512-9a33-43bd-a1cf-f0ca25b4b33a/unable-to-get-past-second-boot-when-preparing-system-or-otherwise-obtaining-traces-with-xbootmgrexe?forum=wptk_v4
http://www.sevenforums.com/performance-maintenance/283057-solution-gave-up-waiting-win7rtm-physical-prefetcher-problem.html
Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

I am using apple iPod-suffle model and I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution

I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I bought the songs break-even and nothing by the script. And both of them stop after 41 seconds and they're supposed to last for four minutes.

I bought the songs breakeven and nothing by the script. They both stop after 41 seconds but they're supposed to last for four minutes.

As you give the price in £'s I assume that you are here in the UK, in which case try deleting the incomplete tracks from your iTunes library and redownload them (re-downloading isn't possible in all countries but is in the UK) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear

Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.

- Try a reet:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to computer and if it shows in iTunes restore the iPod.
- If the screen is still white, let the battery fully drain and charge for an hour.
- If still white screen it is time for an appointment at the Genius Bar of an Apple store.
- If not, the try the reset and connect to iTunes and restore. Also try placing the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
Then, wake the Mac the way you normally wake it.
Then, find the Console app - it is in your Utilities folder and looks like this
You can find it by selecting Utilities from the Finder's Go menu.
Open Console.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
Make note of that exact time in hours, minutes, and seconds.
Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
All previously displayed log entries will reappear.
Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
Copy and paste those log entries in a reply.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

Nat tunnel for SIP closing after 933 seconds.

Similar Messages

Maybe you are looking for