Native installer on Linux does not show vendor

I'm using Air 2.0.2.12610 on Ubuntu.
I can build, install, and execute the application just find but the installer does not set the Maintainer or Description when so when installing the user has no information, can that be set?
Thanks
/jms

Hi,
You should be able to see the Maintainer and description fields using the command "dpkg -s adobeair" on console and by searching for adobeair package in Synaptic. Hope that helps.
Thanks!
Sanika

Similar Messages

Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination" the installation stalls and does not show any destination disks

I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe Oliver

Hello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

Vendor Ref No. does not show in Journal Entry for AP Credit

AP Invoice journals show the vendor reference number in field Ref 2. However, when creating an AP Credit memo, the vendor reference number does not show in the journal for the credit memo, instead the field Ref 2 is used for the base document number.
I have two clients who have pointed out that they would expect to see the vendor ref number in the Ref 2 field in the journal when an AP Credit is created, as this is the functionality for Goods Receipts and AP Invoices.
Both clients are currently manually updating the Ref 2 field in the journal for AP Credit, so that in the BP account transactions view they can sort field Ref2 by vendor reference number.
Does anyone have any suggestions on a work around for this?
Thanks,
Lianne Plant

Hi Lianne Plant,
You may check: Journal Ref2 field : AP credit note
Thanks,
Gordon

Vendor does not show in Display Vendor list

Hello SRM Experts,
I have a problem where I can see the Vendor in BP but I am not able to find this Vendor on the display vendor list on the web.
In BP, I can see that "Display in BP role" for this Vendor is "Business Partner (Gen.)" and not "Vendor".
Could this be the reason that it does not show up?
Also we dont have this vendor in VENMAP table but it is in BUT000.
Please advise.
Thanks and Regards
Aaarvi

My apologies for not being clear.
I meant in EBP, while creating a shopping cart, we select the Vendor. While selecting we have the F4 option.
I do not see the mentioned Vendor in this list, but I can see this in BP transaction. This Vendor also exists in ECC.
Per my investigation, I cannot this Vendor in VENMAP but is there in BUT000. Also as mentioned previously, the type is different for this Vendor.
Please advise.
Thanks and Regards
Aaarvi

Re: GUI installation of WLS 6.1 does not show

Hi ,
I confirmed I installed usig windows installation file (.exe). Anyway,
thank you for your reply. I have solved it already. Now it works fine.
Kanokwan.
"Michael Young" <[email protected]> wrote in message
news:[email protected]...
Hi.
Sorry for the dumb question - but can you confirm that you installed usingthe
windows installation file (.exe) and not one of the unix installation bin
files? From your description it sounds like you tried to install usingthe unix
install file. You should definitely be prompted for installationdirectory and
system password.
Regards,
Michael
Kanokwan wrote:
Hi All,
I try to install WLS 6.1 on Windows 2000 with GUI installation mode. The
GUI
installation does not show up. Unfortunately, I could not select thedrive
for BEA HOME and set the password for starting the weblogic. However,the
BEA_HOME is automatically created in C:\
Moreover,when i started Weblogic, the following error occurred:
####<Apr 17, 2002 2:56:04 PM ICT> <Info> <Logging> <kanokwan> <myserver>
<main> <> <> <000000> <FileLogger Opened.>
####<Apr 17, 2002 2:56:08 PM ICT> <Emergency> <Security> <kanokwan>
<myserver> <main> <> <> <090053> <Authentication failure - reenterpassword
to boot weblogic server:>
####<Apr 17, 2002 2:56:12 PM ICT> <Emergency> <Security> <kanokwan>
<myserver> <main> <> <> <090053> <Authentication failure - reenterpassword
to boot weblogic server:>
####<Apr 17, 2002 2:56:15 PM ICT> <Emergency> <Server> <kanokwan><myserver>
<main> <> <> <000000> <Unable to initialize the server: 'Fatal
initialization exception
Throwable: java.lang.SecurityException: Authentication for user system
denied
java.lang.SecurityException: Authentication for user system denied
at
weblogic.security.SecurityService.initializeSuid(SecurityService.java:375)
atweblogic.security.SecurityService.initialize(SecurityService.java:118)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Does anyone have the solution for this problem?
Thank you in advance
Kanokwan--
Michael Young
Developer Relations Engineer
BEA Support

"Kanokwan" <[email protected]> wrote in message news:<[email protected]>...
Hi ,
I confirmed I installed usig windows installation file (.exe). Anyway,
thank you for your reply. I have solved it already. Now it works fine.
Kanokwan.
"Michael Young" <[email protected]> wrote in message
news:[email protected]...
Hi.
Sorry for the dumb question - but can you confirm that you installed usingthe
windows installation file (.exe) and not one of the unix installation bin
files? From your description it sounds like you tried to install usingthe unix
install file. You should definitely be prompted for installationdirectory and
system password.
Regards,
Michael
Kanokwan wrote:
Hi All,
I try to install WLS 6.1 on Windows 2000 with GUI installation mode. The
GUI
installation does not show up. Unfortunately, I could not select thedrive
for BEA HOME and set the password for starting the weblogic. However,the
BEA_HOME is automatically created in C:\
Moreover,when i started Weblogic, the following error occurred:
####<Apr 17, 2002 2:56:04 PM ICT> <Info> <Logging> <kanokwan> <myserver>
<main> <> <> <000000> <FileLogger Opened.>
####<Apr 17, 2002 2:56:08 PM ICT> <Emergency> <Security> <kanokwan>
<myserver> <main> <> <> <090053> <Authentication failure - reenterpassword
to boot weblogic server:>
####<Apr 17, 2002 2:56:12 PM ICT> <Emergency> <Security> <kanokwan>
<myserver> <main> <> <> <090053> <Authentication failure - reenterpassword
to boot weblogic server:>
####<Apr 17, 2002 2:56:15 PM ICT> <Emergency> <Server> <kanokwan><myserver>
<main> <> <> <000000> <Unable to initialize the server: 'Fatal
initialization exception
Throwable: java.lang.SecurityException: Authentication for user system
denied
java.lang.SecurityException: Authentication for user system denied
at
weblogic.security.SecurityService.initializeSuid(SecurityService.java:375)
atweblogic.security.SecurityService.initialize(SecurityService.java:118)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Does anyone have the solution for this problem?
Thank you in advance
Kanokwan--
Michael Young
Developer Relations Engineer
BEA Support
passwords are also placed in SerializedSystemIni.dat (when you
install), this file needs to be moved from to all the config
subdirectories if its changed.

UOI does not show nodes screen in RAC installation

Oracle 9.2.0.4 on Red Hat Linux AS 2.1.
I have configured the rsh and rcp services on both nodes and configured and tested the public and private networks.
I installed the Cluster Manager first. Then I have downloaded and started the hangcheck-timer form O.S. I have configured and started the ocmstart.sh script.
But when try to install the rdbms the OUI does not show the Nodes screen.
What am I doing wrong?

Well, then just check the master data setting in Query designer--> choose 0Costcenter and check the properties > choose advanced tab> under filter value Selection during Query Execution . check for these options
1.Only Posted Values for Navigation
2.Only values in Infoprovider
3.Values in Master data table
4.Characterstic Relationship.
You need to choose the 3rd opitions as you need to read the master tables for 0costcenter.
Hope it helps,
Cheers,
Balaji

SCM9.0: Direct connect vendor does not show up in eProcurement Create Req

Hi all,
FSCM 9.0 bunlde 21/Tools 8.49.27
I set up a direct connect vendor using Roundtrip but I always have the message "No direct connect vendors available." in the Web Tab of the eProcurement>Create Requistion.
Has anyone ever had this error?

The reason the vendor does not show up is because I did not setup the vendor catalog security in eProc.
Menu eProcurement > Maintain catalogs > Catalog Security Types
Solved issue

Bonjour does not show printer available for installation

I can print via Airport-Express when I'm using an HP Desk Jet 948c. If I connect the HP Office Jet G95 (purchased 2001) to the Airport-Express Bonjour does not show the printer as available for installation, but I can print with printer connected to the USB port of the notebook.

These may help.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html
iFelix

Ibook g3 hard drive does not show up after new installation

I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
Scott

Hey Scott,
The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
Richard

Conversation Translator does not show up after installation

Hi,
I installed the Conversation Translator for Lync 2010 from conversationtranslator.com. The installation was successful but the add-on does not show up. I used it before on a different network and it was working fine. I don't know what to check to figure
out why its not working this time. Note: I am connecting to our network through VMware (VDI). The colleague of mine who is connecting directly managed to install and is able to use.
Could you please help?

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

GarageBand v3 does not show up in Automator

Greetings,
I have been trying to create some sort of automation for my Church. We are recording teachings in GBv3. I would like to be able to do the following to make the process as simple as possible through two workflows.
First workflow:
1. Open a GarageBand project that already has a single track setup with the appropriate settings predone (essentially a template).
2. After opening, Do a "Save as" with a window prompt for the user to rename the project into the designated teachings folder in the ~/music/GB/teachings.
3. Set the track to record mode
Second workflow:
1. Save the current project.
2. Send to iTunes.
3. Quit GarageBand
4. Have iTunes convert the file to mp3 with 8bit mono, 8khz.
5. Quit iTunes.
6. ftp the new file to the designated directory on the website.
The issue is that Automator does not even show GarageBand v3 in the Applications. I have searched on these forums in both GB and Automator. I have seen references to the GBActionPack1.1, but the actionpack states that no installation is required, just put the actionpack in the same folder as GarageBand and the actions will show in Automator when you select GB in the Applications within Automator.
Again, GB does not show up in Automator. This is true on the newly purchased Mac Mini for the Church nor on my Home computer (PBG4 Dual 1.25Ghz, mirror door with OSX 10.4.10 and iLife '06).
Does anyone know why it doesn't show up in Automator? Is GBv3 a downgrade regarding Automator, because all indications show that GBv2 showed up in Automator.
Thanks in advance for any advice or help in this matter.

I don't know for V3 but for V4 it works flawlessly (I mean automator recognize the plug...)
hth

PS gallery linked to Dreamweaver does not show up once on pub. server

i created a photoshop gallery and linked it to my website (Dreamweaver) under construction (as im learning); it shows up fine when i preview it on browser from my computer location, however, it does not show up once on the public server. any help as to the direct problem with this link/file/coding, etc... would be greatly appreciated....
site >>>> http://paulrosal.com/ >>>>> CLICK ON "ART"
******************************CHECK OUT CODING RIGHT HERE******************************

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>gallery</title>
<style>
body,html {
margin-top:0;
margin-left:0;
margin-right:0;
margin-bottom:0;
height: 100%;
width: 100%;
</style>

<script src="resources/AC_RunActiveContent.js" language="javascript"></script>
<script language="JavaScript" type="text/javascript">
function getQueryVariable(variable) {
var query = window.location.search.substring(1);
var vars = query.split("&");
for (var i=0;i<vars.length;i++) {
    var pair = vars[i].split("=");
    if (pair[0] == variable) {
      return pair[1];
return -1;
</script>
<script language="JavaScript" type="text/javascript">
var startImg = getQueryVariable("startImg");
//alert(startImg);
</script>

<script language="JavaScript" type="text/javascript">

</script>
<script language="VBScript" type="text/vbscript">

</script>
<script language="JavaScript1.1" type="text/javascript">

</script>
</head>
<body><div align="center" style="width:100%; height:100%">
<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not support scripting
// or for those that have scripting disabled.
       Sorry, this photo gallery requires that scripting be enabled on your web browser and that the Adobe Flash Player be installed.
<a href="http://www.adobe.com/go/getflash/">Download the Adobe Flash Player</a>
</noscript>
</div>
</body>
</html>

Are you sure you have uploaded everything in the gallery folder to the correct location. It can't find the index.html page.

HT202570 My buisness address does not show up on apple maps as a correct address. The address is 1351 summit drive jasper AL 35501 and we have been here for 8 years.

I have been at my buisness for 8 years and the address does not show up as an address in apple maps on any of my devices. How can I fix this? My address is 1351 summit drive jasper al 35501.

@Kilgore-Trout, there is no "contact us" at the bottom of the Apple Map. All I get is report the problem...move the pin, which I have done numerous times. Google maps gets it right & due to that fact, we have to tell vendors to NEVER use Apple Maps when getting directions for deliveries. I love apple, own all their products and now my BMW i3 is using their maps & I would love to have them be responsive.

Native installer on Linux does not show vendor

Similar Messages

Maybe you are looking for