Native Music Application Stuck on Skip

I looked for a better location to start this discussion, but I can't seem to find a place already started to discuss the native music app that comes with the iPhone.
While there are applications listed such as iTunes U, iBooks, iPhoto, etc under iOS apps, the music app is not there.
Moving on to my predicament:
When the new ios7 came out, one feature I was excited to start playing with was the new iTunes Radio. At first it worked, I added a chanel, listened to it, thumbed up a couple songs, etc.
The next day I go to continue listening to my added channel. It will not play. Instead, it scrolls through (right to left) song name after song name, not stoping no matter what I press. I tried restarting app and phone alike. This was the first day...I gave up and tried a day later. Now it scrolls through and stops after 6 songs (as though I myself were skipping the songs and it had reached its limit.
It does this every time I add a station, and if I play a station without adding it, it plays the first song and then skips by 6 song titles incredibly fast.
I wanted to bring this up here in case it was happening to anyone else.
Thanks for reading, and thanks in advance for any recomendations and/or feedback.

Thank you Rod for the clarification.
As an added note. I finally got a response from Oracle Support regarding my question and posted below:
"Yes. You can skip to section 7 not step 7
Correct one is section 7. as in Note - 417558.1 (but internal note,not published)
It should be
If you have only migrated your existing 4i End User Layers to Discoverer 10.1.2
without patching new eex files, you can skip the remaining steps in this
section and proceed with Section 7 ( as in Note - 417558.1 )
There was a remark on the Note 313418.1 to change this.

Similar Messages

Unable Video Playlists On Ipad 2 In New Music Application

Hello,
Is everyone else getting frustrated by the fact that if you browse on your iPhone to Music then to a video playlist you can play a tv series in order of a playlist, however when trying to do the same thing on the iPad 2, it is not possible, when you go to Music application then to the Video Playlist you created in itunes which works perfectly on my iPhone 4S, it shows a folder containing 0 *Songs, however on the iPhone it shows all subfolders (i.e. Series 1, Series 2 etc.) and links to the video files and works flawlessly!
What the **** Apple ? Really ? It is so frustrating ! Why can't you keep applications the same accross devices, functionality wise.
The new music app is really ugly I cannot simply use a nice list view like the old ipod app which i could see my phone library and playlists nicely on the side panel.
Another thing, my iPhone 4S allows creating a hotspot, my Ipad 2 does not have this feature? Both are IOS 5.0.1.
What a Joke !
Any Comments ?
ksA

If you play the video from the ipod app it simply goes to the video and stops playing it at the end and that is it. but i found a way to play the video play list very easily:
1. start the video playlist pressing shuffle that is on the top of the checklist
2. go out of ipod by pressing the home button, it will stop but restart it with the apple headphones with remote control, so that the music continues to play when you are not in the ipod app.
3. go to the video app and it will show the music video that is playing, you cannot skip to the next but if you wait until it finishes it will continue with another music video of the playlist, etc!!!!
one more thing hanlded!
interesting but true!!!
Try it!!!

Music applications stop playing when my phone locks

I was forced to update my phone from the 5.0 software to the 7 iOS software because most of my applications would no longer take updates. Now when I play my music applications every time my phone locks my music apps stop playing. I have researched this and it appears there is no way around it. The only thing that helps (not much) is extending the lock screen time to 5 minutes. Most of my phone use (other than text and talk) is streaming music and now it is a total pain due to this limiting feature. Did they do this to try to force customers to pay for music on I-Tunes? Does Apple have plans to fix this or should I start shopping for a different brand smart phone?
I have also noticed that my battery life is way shorter with the new update. I can't even make it through a full day now. Is there any way to reverse the upgrade and go back to 5.0 or am I stuck with the new software. Frustrating...

Pete Nershi wrote:
I was forced to update my phone from the 5.0 software to the 7 iOS software because most of my applications would no longer take updates. Now when I play my music applications every time my phone locks my music apps stop playing. I have researched this and it appears there is no way around it. The only thing that helps (not much) is extending the lock screen time to 5 minutes. Most of my phone use (other than text and talk) is streaming music and now it is a total pain due to this limiting feature. Did they do this to try to force customers to pay for music on I-Tunes? Does Apple have plans to fix this or should I start shopping for a different brand smart phone?
I have also noticed that my battery life is way shorter with the new update. I can't even make it through a full day now. Is there any way to reverse the upgrade and go back to 5.0 or am I stuck with the new software. Frustrating...
There is no Apple in this user to user forum.
Not sure why people keep talking about changing to a different brand, - we users don't care if you stay or go away from Apple.
My music plays just fine when I use the built in music app.
If you're using a 3rd party app - then talk to the app developer or look at their support site.

On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

Hi cowboyincognito,
Thanks for visiting Apple Support Communities.
If you don't have the option to play music by genre on your iPhone, try this step to find the Genre option:
Browse your music library.
You can browse your music by playlist, artist, or other category. For other browse options, tap More. Tap any song to play it.
To rearrange the tabs in the Music app, tap More, then tap Edit and drag a button onto the one you want to replace.
Best Regards,
Jeremy

Java AWT/Swing coexisting with native Qt application

Hi,
I'm trying to figure out how to get a GUI application written in Java to work in a native Qt application by embedding the Java application in the Qt application.
Any suggestions on how to do this...

It requires creating a system window (possibly frameless) using a native API calls (e.g. WinAPI or Xlib). That window might be embedded in your application. You would have to send system messages to that window (WM_XXXXX on Windows and XEvent's on X).
For more information I suggest you to look at KDE sources where it is implemented for X Window (there is also a Java package, kjas which is a server for running applets in Konqueror.
Or if you have much time you could write AWT on top of Qt (there is one built with Gtk+) and give the JVM your classes instead of the original JDK.
The choice is yours. Happy Qt-ing!

How to open Adobe Reader file from another native IOS application?

There is an existing thread, but I want to re-open it because I think this is an important feature that we need badly. I was wondering if there is any plan to add this feature so we can open PDFs directly into Adobe from the web / other apps.
How to open Adobe Reader file from another native IOS application?
Basically, we just want to use a custom URL scheme to open a specific document in the App. Currently, this only opens the app but does not load the file.
APB

Not to hijack the conversation but I can explain why this would be useful for both the above case and another.
What I believe Pavel is talking about is setting up a "URL Scheme" for the Adobe Acrobat iOS application so that you can easily open a PDF specifically in Adobe Acrobat iOS from other native applications and even from web applications opened within Safari. This is particularly useful if your application requires some of the specific features in Adobe Reader iOS to grant them the best experience possible and you want to encourage this.
Another case: If you're using Adobe Livecycle's document security modules (that encrypts PDF files so that Adobe Acrobat must "phone home" to decrypt and view the document), these PDF's can only be viewed inside the Adobe Acrobat application and appear as blank in most other PDF readers. Having a URL scheme allows your application utilising this functionality to have a 1 click step to view the PDF rather than the current non-user friendly process:
- Within Safari, touch the PDF link (appears as blank in the default Safari PDF reader, which in itself is confusing)
- Touch "Open in..."
- Touch "Adobe Acrobat"
We have an immediate need for this functionality for the example above. I can resubmit it in a separate post if necessary.

Slow WI-FI transfer using native YouTube application on the iPhone 3G

Hello all,
I have seen several posts similar to the one that I'm making now, but since my newest discovery brings a small twist to the issue when compared to the other cases, I decided to make a new thread.
My issue is with the native YouTube application for the iPhone 3G, as it is mysteriously slow. A lot of people mention that lowering the router to B/G standards will remedy the issue. However, I do not think this issue is related to this because when I launch Safari on the iPhone and go to apple.com/trailers the speed is lightning fast. I did some WI-FI comparison testing:
PC: XP Pro SP3 running all drivers at newest releases incl. updating motherboard firmware.
iPhone 3G: Firmware v2.1
Connection: 10 Mbit/2 Mbit
Safari cookies, history, and cache cleared after each attempt on both iPhone and PC. Also, I closed Safari, ran CCleaner (just to make sure all temporary data was gone), and reopened Safari on the PC while Powercycling the iPhone 3G between each attempt.
Movie: http://www.youtube.com/watch?v=psYClvuONG4
Length: 1 min. 45 sec.
Load time on PC using Safari: roughly 25 sec.
Load time on iPhone using Safari: roughly 4 (FOUR!) min. 30 sec.
After this I directed Safari on both iPhone and PC at:
Movie: http://www.apple.com/trailers/magnolia/splinter/
Length: 1 min. 38 sec.
Load time on PC using Safari: roughly 5 sec. (for the small size as iPhone format does not seem to be available when browsing with a PC)
Load time on iPhone using Safari: Roughly 10 sec.
I do not know what is going on here. Do the size and/or compression of the two movie formats differ so much from each other that this could explain the normal transfer speed via apple.com/trailers? Or is there an issue with the YouTube application? Maybe the YouTube conversion system? Could it be a routing and/or hardware (on either ISP, ISP carrier or YouTube itself) issue in case there are "localized portals" for YouTube depending on the user's geographical location?
In general, speed is not an issue. Performing speed tests towards a localized server in Denmark using my iPhone give excellent results compared to the connection speed I am paying for, and I do not have issues surfing elsewhere via the iPhone. It is only when I use the native YouTube application on iPhone 3G that my transfer rates are poor.
I really want to solve this problem before I go nuts...
Best regards

About a week ago YouTube stopped connecting on my iPhone 3G -- as far as I know nothing changed on my end. The YouTube application seems to function normally, bookmarked videos are still there and play, for example, but it will not update, not search, etc. I get a message that YouTube is not available.

Dreamweaver CS5.5 - Creating a Native Mobile Application | CS5.5 Web Premium Feature Tour | Adobe TV

In this video we'll explore how you can configure a Dreamweaver CS 5.5 site to build a native mobile application using the popular PhoneGap framework - and deliver rich native applications to iOS and Android without needing to learn new languages or tools.
http://adobe.ly/xjc2Y9

Hi, I have a question.
(Quick explanation) I have dreamweaver cs6, I created an android app, a run the emulator and everything seems to be ok with the app, I download the .apk and everything ok so far, but when i wanted to upload it to Google Play i need to sign it, but I search all the web somehow to sign it and i did not find anything to sign an app made with dreamweaver and Phonegap, just those made with Eclipse.
My question:
Is there anyway to export driectly from Dreamweaver to Eclipse as a project? so i can export it and sign it...
if Not, How can i convert those html files made with dreamweaver to Eclipse files, so I can use Eclipse to sign and generate the keystore file
or, How can I generate a keystore file to sign an app made with Dreamweaver?
Thakns.

Nokia Music Application Mp3 Downloads fail

I bought a song using the Nokia Music application on my Lumia 920. The first attempt to download started and then stopped within a second of starting. No sign of any sort of progress bar. Mind you, this would be the first time I tried downloading with the Nokia Music application. I tried again and that failed as well. I find this to be poor application design. The download service in the application should be more robust and should only report a song as being downloaded when it is completely downloaded and not just when the download just about got started.
This sort of thing will steer me clear of using Nokia Music in the future. I still don't have my song. Before anyone suggests to try the web site from PC I did that too and it seems that I used all of my retry downloads for that song.
This is very poor. I use my cellphone primarily to listen to music as I am not one of those that needs to be wired 24/7 and as such I sometimes buy a song on a whim.

hi mate,
you are always welcome to leave feedback directly with Nokia regarding your experiences with Nokia Music via clicking the Nokia Support link at the bottom of this page.

Exchange Rate table Upload to Native Essbase Application

Hi Gurus,
I have a native multicurrency essbase application in 11.1.2.1. For planning application exchange rate tables are there for which I can generate a currency conversion script to Essbase side. But for native essbase application how rates could be uploaded from exchange rate database table into essbase. we have a sample smartview template in which we want the rates to be populated.
Thanks in advance.

Hi all,
Can we load exchange rates from sql table through rule files?....As my application is standalone essbase application so I can't take the advantages of Planning Exchange Rate tables.
Please help. Thanks in advance

Can an AIR application be packaged and launched from inside a Native Android Application

Hello,
I work for a company that has an AIR application/game. We are currently developing an Android native application and would like to strip out the AIR game and include it with the native application, we would like to be able to launch the game from within the native Android application. How would this be done?

no p. )
[UIApplication sharedApplication] its most cool thing in xcode that allow make native windows over adobe air

Oracle ADF Mobile Framework for native mobile applications

Hi All,
Has anybody tell me the roadmap from Oracle for the new release of Oracle Mobile Client (Native Mobile Application Development).
What is the tentative release date for the new framework?
Regards,
Muthulakshmi

We are all waiting :(
Oracle generally don't give dates (or they are ambiguous). So all you can do is wait. Do you already visited the adf mobill page http://www.oracle.com/technetwork/developer-tools/adf/overview/adf-mobile-096323.html ?
Timo

Music Application in iOS 5 / iOS 5.0.1

Music Application in iOS 5 / iOS 5.0.1
you choose a particular song!
pplications and the other play or not play music!
or you click pause and resume several times!
or is without music!
It happened to someone?
thank you

Yep that's a good idea. I gave my feedback to Apple to tell them, that It is very bad that the lyrics are not shown anymore in the iOS 5 Music App.
CALL TO EVERYONE WHO THINKS THE SAME WAY: Submit your Feedback to Apple and tell them to fix this! The more people will do it, the better it is. Hopefully that will help.
Submit it here:
http://www.apple.com/feedback/ipad.html

Music application fails to launch

Music application fails to launch. When music app selected I get a blank screen and after about 20 secs it returns to the home page. According to settings all my musuic files are there. I did a restore and it seemed to restore it at frist but was very slow responding. I powered the unit down and when it restarted the music app would again fail to launch. I have s 32GB iPod with about 4-5 gb free. Any suggestions?

Try restoring the iPod to factory defaults/new iPOd. Not from backup. The sync a couple of songs and try and then add more songs incrementaly.

Closing Music Application in N73Music Edition

Plz let me know how to close Music application in N73ME.and also how to check the applications running in the background.
Thanks

Hi
To Check for any applications running in the background, simply HOLD down the menu key.
I don't think you can switch off the music player on the Music Edition. But try this when you are in Music Player, press options then scroll down and and try and find Exit. If its not there then it can't be shut down.
Peace Out
The Bearded One

Native Music Application Stuck on Skip

Similar Messages

Maybe you are looking for