Native Supplicant "NAK requesting to use PEAP instead"

Hello,
We have a Cisco ISE infrastructure in place and we're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the native Windows supplicant to use EAP only?
"Microsoft: Smart Card or other certificate" is selected under network authentication method, by group policy, and I thought that wouldn't allow PEAP, but our ISE logs show "NAK requesting to use PEAP instead", after which authorization
fails because we're not using PEAP.
For what it's worth, the user can fail authentication for hours and I can either allow open authentication on the port for a bit, or the user can leave for the day and come back tomorrow and authentication will succeed. I'm not sure if it's an ISE problem or
a supplicant problem, but I'm leaning towards supplicant.
Thanks,
Andrew

Hi,
About this issue, please contact Cisco Tech Support for help.
Karen Hu
TechNet Community Support
I've already been in contact with them and they've verified our configuration. All that can be done on the Cisco side is to "propose" the client to go through EAP-TLS as the first option, which we are doing. This will not block any clients trying to connect
using other protocols, and, though this will propose EAP-TLS, there is now way to enforce it at the supplicant level. This will be a client decision always. From Cisco:
Please monitor this after the change we applied, but if the issue persists, since we are dealing with windows supplicant, it would be a good idea to involve the native supplicant support.

Similar Messages

ISE 1.2, Patch 7: "NAK requesting to use PEAP instead"

We're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the Windows supplicant to use EAP only?
For what it's worth, the user can fail authentication for hours and I can either allow open authentication on the port for a bit, or the user can leave for the day and come back tomorrow and authentication will succeed. I'm not sure if it's an ISE problem or a supplicant problem, but I'm leaning towards supplicant.
Personas:
Administration
Role:
PRIMARY(A)
System Time:
Apr 24 2014 08:26:58 AM America/New_York
FIPS Mode:
Disabled
Version:
1.2.0.899
Patch Information:
7,1,3
11001
Received RADIUS Access-Request
11017
RADIUS created a new session
15049
Evaluating Policy Group
15008
Evaluating Service Selection Policy
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
11507
Extracted EAP-Response/Identity
12500
Prepared EAP-Request proposing EAP-TLS with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
12300
Prepared EAP-Request proposing PEAP with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12302
Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
12318
Successfully negotiated PEAP version 0
12800
Extracted first TLS record; TLS handshake started
12805
Extracted TLS ClientHello message
12806
Prepared TLS ServerHello message
12807
Prepared TLS Certificate message
12810
Prepared TLS ServerDone message
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12318
Successfully negotiated PEAP version 0
12812
Extracted TLS ClientKeyExchange message
12804
Extracted TLS Finished message
12801
Prepared TLS ChangeCipherSpec message
12802
Prepared TLS Finished message
12816
TLS handshake succeeded
12310
PEAP full handshake finished successfully
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12313
PEAP inner method started
11521
Prepared EAP-Request/Identity for inner EAP method
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11522
Extracted EAP-Response/Identity for inner EAP method
11806
Prepared EAP-Request for inner method proposing EAP-MSCHAP with challenge
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11808
Extracted EAP-Response containing EAP-MSCHAP challenge-response for inner method and accepting EAP-MSCHAP as negotiated
15041
Evaluating Identity Policy
15006
Matched Default Rule
15013
Selected Identity Source - *****
24431
Authenticating machine against Active Directory
24470
Machine authentication against Active Directory is successful
22037
Authentication Passed
11824
EAP-MSCHAP authentication attempt passed
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11810
Extracted EAP-Response for inner method containing MSCHAP challenge-response
11814
Inner EAP-MSCHAP authentication succeeded
11519
Prepared EAP-Success for inner EAP method
12314
PEAP inner method finished successfully
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
15036
Evaluating Authorization Policy
24433
Looking up machine in Active Directory - host/*****
24435
Machine Groups retrieval from Active Directory succeeded
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15004
Matched rule - Default
15016
Selected Authorization Profile - DenyAccess
15039
Rejected per authorization profile
12306
PEAP authentication succeeded
11503
Prepared EAP-Success
11003
Returned RADIUS Access-Reject

salodh,
Thank you for your response. Below is the authorization policy it should hit. The trouble is the workstation wants to use PEAP for some reason but we don't want PEAP because we're certificate-based. I understand what you're saying, and it's because I didn't word my question correctly.
12500
Prepared EAP-Request proposing EAP-TLS with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
If the NAK would not request PEAP, it would continue on to the following Authorization Policy (and succeed):
Name
Wired-******-PC
Conditions
Radius:Service-Type EQUALS Framed
AND
Radius:NAS-Port-Type EQUALS Ethernet
AND
*******:ExternalGroups EQUALS **********/Users/Domain Computers
AND
Network Access:EapAuthentication EQUALS EAP-TLS
Again, this PEAP request only happens occasionally. This same workstation will work at other days/times. If I could figure out why some workstations randomly request PEAP (or find a way to force EAP only) I think that would take care of it.
Thanks again, sir.
Andrew

Parameters into request-uri using POST instead of GET.

I wrote some servlets that send parameters each other.
The request came from an HTML form, and I used JavaScript to submit it.
Example:
<script language="JavaScript">
function doMyPost(idparam)
document.myform.action=document.myform.action+"?id="+idparam;
document.myform.submit();
</script>
<form name="myform" action="myservlet" method="post">
... 
</form>
In this case the servlet method "myservlet.doPost()" could not find "id" parameter.
Writing:
<form name="myform" action="myservlet" method="post">
<input type="hidden" name="foo" value=""/>
</form>
Now the servlet method doPost() found "id".
I know that a correct submit with "post" and with an input named "id" would not generate errors (my HTML is very unconventional...), but I wrote "myservlet" to accept only post request, and was easy to build a list of anchors (XSL) which call my script with different values of "id" ...
Why this behaviour? (is due to servlet, or web server Websphere, or browser IE ?).
I found nothing about this in the HTTP/1.1 specification, but I can't exclude some protocol intervention...
Bye,
Mauro

As I recall, this is in the specification, but it's in the part describing the functionality of a form post.
When the method is POST, the receiving page reads the information from the form-content only, which has been MIME-encoded and appended to the submission. Any parameters added to the URL do get passed along but they are ignored by the POST processing.
You'd be better off adding a hidden field to your form:<script>
function docPost(idparam){
   //document.myform.action=document.myform.action+"?id="+idparam;
   document.myform.id.value = idparam;
   document.myform.submit();
</script>
<input type="hidden" name="id" value="">

How to configure WL 10.3 to used log4j instead of jdk logging

Hi,
How can I configure WL 10.3 to use log4j instead of jdk default logging. I did changed the logging to log4j through the console for the AdminServer and one of the Managed Instance. I try to deploy axis2.war but it fails and complains about apache logger class not found. So wondering what other settings do I need. I even copied log4j-1.2.15.jar & wllog4j.jar in WL_DOMIAN\lib and restaretd the server but still gets the following error is
'weblogic.application.ModuleException: [HTTP:101216]Servlet: "AxisServlet" failed to preload on startup in Web application: "axis".
java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.servlet.internal.WebComponentContributor.getNewInstance(WebComponentContributor.java:223)
     at weblogic.servlet.internal.WebComponentContributor.createServletInstance(WebComponentContributor.java:247)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:255)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:521)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1913)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1887)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1805)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3041)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1374)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:452)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:629)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:206)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:40)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:140)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:106)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@70b01a for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Logger) (Caused by org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@70b01a for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Logger))
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
     at org.apache.axis2.transport.http.AxisServlet.<clinit>(AxisServlet.java:83)
     ... 50 more
Caused by: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@70b01a for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Logger)
     at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:413)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
     ... 54 more
Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Logger
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Class.java:2389)
     at java.lang.Class.getConstructor0(Class.java:2699)
     at java.lang.Class.getConstructor(Class.java:1657)
     at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410)
     ... 55 moreThanks

Go to Environments >> servers>> adminServer >> logging >> advanced
change the default JDK logging to log4j
by default weblogic provides two types of logging JDK and log4j

Exception access violation using jlong instead of jint

Hi,
I hope you can help me.
I'm using Java5 under Windows XP and I'm developing under Eclipse.
I try to use an "old" c-Application accesed via JNI.
Status Quo is that, I have access to the c-side, over my JNI-conform DLL. My current task is to translate the c-side structs to java-objects. This also works, but only with limitation.
Calling methods bidirectional is working, manipulation a java-object is like a walk on an warm and sunny Saturday afternoon.
But I'm not able to use all possible parameters (for now I have tried to use jobject, jstring, jint, jboolean, jlong).
The first problem I had, were using Strings as parameters, but this now I deal with the loopway over java/lang/object (using java/lang/String results in an access_violation).
The next problem, and the harder one, is, that I cannot use the type long or jlong.
int (jint) is no problem, with int all works fine, but if I change the environment, creating and using long, I allways get an the access_violation shown below.
Is there anything, I need to know?
working c-side-code:
jobject someObject;
jint anIntegerValue;
anIntegerValue =5;
jmethodID mid3 = (*env)->GetMethodID(env, cl, "initReturnSomeObject", "(ILjava/lang/Object;)Ljava/lang/Object;");
               if(mid3 == (jmethodID)0) printf("\ndooofes MethodName4!\n");
                         else {
                              const char* myParams;
                              myParams = "ooooohwow!!!";
                              someObject = (*env)->CallObjectMethod(env, jobj, mid3,
                                         anIntegerValue, (*env)->NewStringUTF(env, myParams));
                         }wokring java-side-code
public Object initReturnSomeObject(int i, Object obj) {
          String s = (String)obj;
          System.out.println("String: "+s+"\nInteger: "+i);
          some = new SomeObject(s,i);
          if(some==null) System.out.println("Some is not yet initialized, FEAR!!!!\n");
          else System.out.println("Yoh, I'm soooo many good!! \nSome:\nString: "+some.getS1()+"\nInt: "+some.getI1()+"\n");
          return (Object)some;
so, und this code, doesn't work. you can see, the changes are dramatically!! ;)
sorry for my sarcasm. I do not know, why it doesn't work.
jlong aLongValue;
aLongValue = 2;
jmethodID mid3 = (*env)->GetMethodID(env, cl, "initReturnSomeObject", "(JLjava/lang/Object;)Ljava/lang/Object;");
               if(mid3 == (jmethodID)0) printf("\ndooofes MethodName4!\n");
                         else {
                              const char* myParams;
                                 myParams = "ooooohwow!!!";
                              someObject = (*env)->CallObjectMethod(env, jobj, mid3,
                                        aLongValue, (*env)->NewStringUTF(env, myParams));
     public Object initReturnSomeObject(long i, Object obj) {
          String s = (String)obj;
          System.out.println("String: "+s+"\nInteger: "+i+"\nLong: ");
          some = new SomeObject(s,(int)i);
          if(some==null) System.out.println("Some is not yet initialized, FEAR!!!!\n");
          else System.out.println("Yoh, I'm soooo many good!! \nSome:\nString: "+some.getS1()+"\nInt: "+some.getI1()+"\n");
          return (Object)some;
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d942975, pid=1784, tid=1648
# Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
# Problematic frame:
# V [jvm.dll+0x182975]
# An error report file with more information is saved as hs_err_pid1784.log
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
#do you need some other informations or details? something out of the log-file? ok, i have to take the bus, so sorry for uncomplete informations or sentences ;)
till later.

Hi,
I'm quite sure, the signature is correct. For failure check, yesterday I ran javap to check the signature, but I do also mean, that I changed the signature afterwards for several time. And, it works ;) at least the way, using Integer.
Trying to use java/lang/String everytime I got the Error, that the method could not be found - this is the part, I was wrong in my description. So the error-Message is a different one.
Belonging to the question for assumptions I made... it's difficult. I'm quite new to JNI, so, I don't know, what I can assume to do. The Method call seems to be a kind of reflection-mechanism. So I assume that the behaviour is similar. But reflection I'm not very firm, either ^^.
What I do assume is, that the parameter-value J fits to the java-type jlong. But a work around on this, I will try today. getting the jlong into an char* or using long instead of jlong or using Ljava/lang/Long; or a casted Long as Ljava/lang/Object; ...
I'm anxious to the ideas, I will have, bypassing this point. if there is no way, I will write a file, send a email or something like this ;)
Thx for thinking about my problem jschel!! It's great not to be alone.
John

I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone. I am trying to download apps but it say I need to update to 4.3 but it won't let me update. I have the most recent itunes. any idea why?

I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone. I am trying to download apps but it say I need to update to 4.3 but it won't let me update. I have the most recent itunes. any idea why? I saw a thread saying to purchase the newest software (that was posted a few years ago) I paid 4.95 for the software and it's still saying it can't be updated. Am I just SOL??

The 1G iPod can only go as high as 3.1.3. The 1G does not have an internal speaker or volume buttons on the upper left edge.
Identifying iPod models
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.

How to modify a lookup field-type to use checkbox instead of radiobutton?

How to modify a lookup field-type to use checkbox instead of radiobutton?
I would like to modify the behavior for the lookup field.
Normally you get a screen where it is possible to search through a lookup. The items resulted from the search are listed as radiobutton items. Therefore you can select only one at the time to be added.
Is it possible to have the items to be listed as checkbox instead? So that you can check multiple items and therefore be able to add multiple items at the time?
For example:
To add the user to 10 different groups on MS-AD.
It is desired to have the ability to check multiple groups to be added instead only one at the time.
My client would like to use this feature in many other situations.

Displaying will not be a big deal but with that you have to customize the action class and its working as well.

How to Submit a Concurrent Request Set Using a Self-Service Page

Hi all,
I would like to know how to Run/Submit a Concurrent Request Set Using a Self-Service Page
Thanks.
Bench

Hi all,
I would like to know how to Run/Submit a Concurrent Request Set Using a Self-Service Page
Thanks.
Bench

Invalid security certificate for my website host-they say the problem is Apple Safari and use Firefox instead

For the past few days, I keep getting an invalid security certificate in Safari whenever I select Edit My Site from my website homepage (http://annaporterartist.com), or whenever I select anything requiring a secure log in from my website host main page (FASO.com). I have contacted technical support at my website host (fineartstudioonline.com) and they say that this has been an intermittently recurring problem in Safari for years and they recommend that I use Firefox instead. As proof of this they emailed a link to an Apple Support discussion, but it was for Mac OS X Lion v 10.7.4 and Safari 5.1, even though I told them I am using Mac OS X Mountain Lion v 10.8.2 and Safari 6.0.2. I do not get this error message anywhere else on the web using Safari. I did try Firefox and it seems to work fine, but I prefer Safari and I want to know why Safari is not working as it should be. I am concerned that there is a real security problem with my website host and I need someone to explain why I am getting this error message, what it means, and if it is, in fact, a known problem with Safari or is my website host corrupted? Really tired of technical support playing pass the buck or pretending the problem does not exist.
The specific error message is:
Their response to my inquiry and my reply is shown below:

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. What is selected in each of them?

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

Using open instead of file open causes Acrobat X11 to barf and stop working

I get a Critical Error when I use Open instead of File Open.
Faulting Application Path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Problem Event Name: APPCRASH
Application Name: Acrobat.exe
Application Version: 11.0.9.29
Application Timestamp: 5412b52e
Fault Module Name: StackHash_9cd1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c00001a5
Exception Offset: PCH_9A_FROM_ntdll+0x0003AAAC
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 9cd1
Additional Information 2: 9cd11aece74acb27712497bb36a41cb9
Additional Information 3: 907e
Additional Information 4: 907e2580c2bb8a6c100db3c807719959
Bucket ID: 14715054b1814cb4d80f9c990e44ea23 (73554368215)

You can use the DocOpen event.

Firefox can't read any Bookmark that was imported from my PC with file extension .url. Safari reads them fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox

Firefox can't read any Bookmark on my Mac that was imported from my PC with file extension .url. Safari reads them all fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox
== URL of affected sites ==
http://anysite.url
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hello JF.
I don't think that extension is supported. I believe Firefox can only read .json and .html.
You may want to read this though:
[http://support.mozilla.com/en-US/kb/Importing+bookmarks+and other data from Safari Importing bookmarks and other data from Safari]

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Can we use BLOB instead of LONG RAW in JMSStore

(Oracle 9i, Weblogic 8.1.2)
          We are putting in place a Dataguard environment (or standby database). In such environment, prod data is copied to another database in 'pseudo' real time. Unfortunately some 'old' datatypes are not supported by Dataguard. In JMS tables %JMSSTORE, the field RECORD is defined as LONG RAW and LONG RAW is one of the unsupported datatypes.
          Can we alter those tables in order to use BLOB instead of LONG RAW ?
          Regards,
          Bao Nguyen


Hi Bao,
          Answers in-line:
          Bao Nguyen wrote:
          > (Oracle 9i, Weblogic 8.1.2)
          >
          > We are putting in place a Dataguard environment (or standby database). In such environment, prod data is copied to another database in 'pseudo' real time. Unfortunately some 'old' datatypes are not supported by Dataguard. In JMS tables %JMSSTORE, the field RECORD is defined as LONG RAW and LONG RAW is one of the unsupported datatypes.
          >
          > Can we alter those tables in order to use BLOB instead of LONG RAW ?
          Not supported in 8.1. A supported Oracle BLOB capability will be
          available in the next release. I can think of two
          possible work-arounds:
          (1) The following might work, but is not currently supported by
          BEA: Manually create the table with a BLOB type and use
          an Oracle OCI or BEA type IV driver. Definitely do NOT use
          an Oracle thin driver, as data corruption may result.
          (2) I recall that another customer had a replication product
          they were able to get working with LONG RAW by modifying
          the table definition so that the table's handle index was a primary key.
          I do not remember the name of the product.
          (The latter modification is supported for certain releases
          now - but I think this usage must be confirmed with customer support.)
          Tom
          >
          > Regards,
          >
          > Bao Nguyen
          >

Native Supplicant "NAK requesting to use PEAP instead"

Similar Messages

Maybe you are looking for