Natural join--not supported in this technology

Technology on which natural join is executed doesnt support natural joins.
the odi version i am usind is 11.1.1.
Look Up also doesnt seem to work in odi 11.1.1.
How to use look up in odi 11.1.1.

HI,
For lookup you can use Outer join.
For insert you can use Suppose s1 is source and T1 is Target then you can do S1 left outer join with T1.
Thanks,
Lony

Similar Messages

Java Runtime Environment (JRE) version 1.6 is not supported by this driver"

Goal: create new ODI install in testlab on single server
Installer: ODI newbie
Server Software Installed: all 32-bit
Windows 2008
sql 2008
JDK 1.6_22
sqljdbc4.jar (downloaded from Microsoft's site)
No weblogic server installed
Issue: Using ODI Studio to create Master Repository. Jar files and config described below already implemented. When press “Test Connection ” in ODI Studio I get this error: : “Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0"
Details:
(Sqljdbc.jar and) Sqljdbc4.jar downloaded from here:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=99b21b65-e98f-4a61-b811-19912601fdc9&displaylang=en
(Sqljdbc.jar and ) Sqljdbc4.jar placed in C:\Users\Administrator\AppData\Roaming\odi\oracledi\userlib directory
Repository Connection Details:
     Technology: Microsoft SQL Server
     JDBC driver: com.microsoft.sqlserver.jdbc.SqlServerDriver
     JDBC URL : jdbc:sqlserver://ODI:1433;SelectMethod=cursor
     User : odi
What am I doing wrong? TIA.

More details:
ODI = ODI version 11.1.1.3
SQL Server uses default install options.

MW1 does not support Apt-X technology

Currently, MW1 does not support Apt-X technology.
Compare with Samsung HS3000, MW1 do not support Apt-X technology for better sound quality. (lossless)
I'm looking forward MW1 to support this technology by firmware upgrade.
Thanks.

I'll forward this feedback internally.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

"charging not supported by this accessory". If I leave it plugged in, it charges, but I noticed that the charge doesn't seem to hold as long. What does this mean?

Why every time I plug my phone in using a USB cord or charger does it say "charging not supported with this accessory"? The phone will charge if I leave it plugged in long enough, but I noticed that it doesn't hold the charge like it used to. Is this the battery, or something else?

Hi CJ-
There are some chargers designed for thr original iPhone that are not compatible with the 3G and later models. Are you using the USB cable that came with the 3G? That cable, when plugged into a computer USB port, or, when plugged into the power cube / wall outlet, should charge the 3G just fine.
Due to the nature of Lithium Ion batteries, there are safeguards in place to prevent the wrong type of charger from supllying charge voltage to the batteries, and if the proper pins and resistance is not detected by the phone, the circuitry will block charging and give that message.
Therefore: If you are using a 3G compatible (oem, or otherwise valid charger), and you're seeing that "not supported" message, it could be the cable you're using, or it's the phone/circuitry detection in the phone that detects the cable / charger type.
And, if you are getting some charge, but it's not holding very long, it could be that it's a 3G, and the lifespan of the battery is near end of life. The fact that you're getting a charging not supported message is probably of more importance as to why the battery is not fully being charged.

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

Error message charging is not supported with this accessory

I have an iPhone 3GS from Jul 2009. Fully updated. I normally charge it using a USB port on my MacBook Pro so it also syncs at the same time. This week began getting an alert on my phone which said "charging is not supported with this accessory". I resolved initially by unplugging/replugging the cord. In all cases the phone had been charging for some time before the alert appeared. In most cases the phone was sitting on the same surface as the macbook and had not been moved since beginning charge.
The only support document I can find refers to firewire and does not apply to my device.
Since starting this week it is happening more frequently and may require being re-connected several times.
It is still intermittent issue but I depend on my phone.
Thank you for your assistance

I just found some on eBay for about 1.99 each with free shipping and ordered about 6 of them from the seller, I think they came from China so it takes a couple weeks. So far I never got a bad cable, but if you do use eBay please check their feedback to make sure they have a history of delivering quality cables and working cables. Always pay using PayPal if possible so you don't lose your money. There are online sites like Meritline and such that have cheaper cables for direct sales with PayPal checkout and free shipping.
I use the 6' cable in the car, so I don't have figure where to put the iPhone or iPod when plugged into the stereo and it is helpful to have them when trying to charge when the plug is being a dresser or something when I travel.
I also like the retractable cables ($0.99)
I also have the Scosche FlipSYNC Keychain cable too, a bit expensive, but you always have a cable with you just in case.
Message was edited by: cls24

When trying to play videos I get the message "requested URL is not supported on this network" how do I fix this?

I receive the error "requested URL is not supported on this network" when trying to play videos on my iPhone. Can you please advise how to fix this problem?

Hi,
You will need to re-instal iCal as an optional install from your OSX installer DVDs. Then run the Mac OS X 10.5.8 Combo Update.
Best wishes

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.

I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
I am using Windows 8.

Hi,
Which version of Photoshop Elements are you trying to install?
Are you installing from DVD or a download?
If DVD, make sure you are using the Windows one, not the MAC one.
What device are you trying to install on?
Does your system meet the required spec?
Are you on Windows 8 or Windows 8.1?
Brian

Raid Utility Error Message "raid utility is not supported on this computer"

I am not doing anything that I know of, but Raid Utility keeps opening up on its own, and a message pops up multiple times a day telling me "raid utility is not supported on this computer"
Anyone have any idea how to fix this?

Network startup is if you want to start your macbook using a network drive.
Keep your startup settings at your current drive.
Raid utility doesn't apply to you since you only have one hard drive installed, unless you installed another hard drive in your optical bay.
Fibre Channel is another type of hard drive connection via network connection.
You can't access things you don't have installed in your macbook. Those are there in case you decide to have a network drive start up options, a raid configuration of a fibre channel network drive.

Error message "The currently attached accessory is not supported by this iPod" is shown when connected to my Zeppelin Air Dock.

I have 2 iPods, one is a 60GB Classic formatted to Mac the other is a 80GB Classic formatted to Windows. When either is connected to my Zeppelin Air Dock, a message appears on the iPod saying "The currently attached accessory is not supported by this iPod"
I have updated the firmware on the Zeppelin and have the latest updates on each of the iPods.
The Zeppelin works fine and connects to the computer and laptop without issues.

I'm having the same problem, it just started today. I've been running w/ the nike+ sensor and receive w/ my iPod nano for 6 months, logging 75 runs, so don't understand why I'm getting this error now.
Can someone please reply w/ how to resolve this issue? I have Nike+ challenges coming up soon that I can't miss. Thanks!

Error message, "Movie needs Quicktime, which is not supported by this version of iTunes

Since itunes 12 has been downloaded, I can't play any movies or trailers due to an error message or "the movie requires Quicktime which is not supported by this version of iTunes. I have Quicktime, but it still can not play both downloaded content and movies I want to preview. Can you help?

iTunes for Mac: Older media files may require iTunes to reopen in 32-bit mode - Apple Support

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

After iOS 8 update: "This accessory is not supported by this iPad" using Digital AV Adapter on iPad 2

After the update to iOS 8 on an iPad 2 I receive the error: "This accessory is not supported by this iPad" using a digital AV adapter. It works for about 20 seconds before I get the error. Same adapter worked with iOS 7.1, same adapter still works on my iPhone 4s with iOS 7.1.
Curious if anyone else has this issue. The adapter is not a genuine Apple adapter, so I think I'll just buy an official Apple adapter, but I'd love to hear if anyone else has upgraded to iOS 8 and can still use their digital AV adapter on iOS 8 with iPad 2, and what brand of adapter you have. Thanks!

Still not working. My adapter shows as an apple A1422. I can successfully plug it in to an iPad 2 with an older IOS but mine which is on 8.1.2, gives the error "This accessory is not supported by this iPad." I tried turning off the iPad and connecting it to the tv before turning it on. When it is turned on, it displays on the tv for a moment, then the message pops up and no picture is on the tv any longer. Clicking ok does not change the lack of a picture On the tv, but I can use the iPad as normal.
I've tried the adapter on a different iPad 2 that is not on IOS 8 and no message appears.
Help, please!

Natural join--not supported in this technology

Similar Messages

Maybe you are looking for