Nautilus does not automatically refresh

Hello,
I have fam installed but Nautilus does not see any change. I have to press the refresh button....Any tips?
Thanks

I didn't konw I need to activate portmap too :oops:
I'm going to try it tonight! Thanks.
dp wrote:
i had once a problem with fam that i found out was this:
when you run portmap before running fam inDAEMONS in /etc/rc.conf, it will work properly:
DAEMONS=(... portmap ... fam ...)
and not:
DAEMONS=(... fam ... portmap ...)
(the "..." are other daemons)

Similar Messages

My aol inbox does not automatically refresh and display new messages in firefox, but it does in google chrome. How do I fix this?

I have been trying to update settings to allow my aol mail to automatically refresh when new messages come in, vs having to click on the "inbox" in order to view new messages. I followed aol's troubleshooting steps to allow for this, and I finally got it to work in google chrome... but it will not automatically refresh in firefox. can you please help? thanks!

Which troubleshooting steps did you get?

Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked

I have just purchased CS4 with Bridge for my new MacIntosh. In Bridge for the PC, when I double click a photo it automatically brings up Photoshop. On the Mac version, it gives me an error message saying that part of the application is not loaded. I completely uninstalled the program, and reloaded the application and still get the same message. So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries: "Open with CS4 (default)" and "Open with CS4." This works if I pick either option. My Windows version only has "Open with CS4 (default)" as the option.
I called Adobe support (in India?) with no solution.
I really like the double click option rather that using the pop-out menu choice. What is wrong with the Mac install, and how can I fix this issue?

Thank you for your help. I updated the software and it "healed" itself.
Best regards,
Gregory T. Stramat
[email protected]
801-978-4735 (Office - Preferred)
801-652-0775 (Mobile)
Omke Oudeman <[email protected]>
01/22/2010 12:52 AM
Please respond to
[email protected]
To
Gregory Stramat <[email protected]>
cc
Subject
Bridge Does Not Automatically Bring Up Photoshop When
the Photo is Double-Clicked
This might mean that you have either 2 installs of CS4 (one on an other
disk?) or you did not use the the default application folder on root level
but have it installed in the user account application folder. Could you
check this?
and go to "Open With" and there are two entries:

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

When I click on a picture, Photoshop Elements 12 does not automatically open.

When I click on a picture, Photoshop Elements 12 does not automatically open (as it did when I used previous versions Photoshop Elements 4 and 9). I can't even right-click (Windows) on the picture and choose Open With and specifiy Photoshop Elements 12. I have called Adobe several times (Case No. 185140584) and they keep saying it has been sent up to senior management and they will call me back with a solution - but to no avail! No return calls and I still can't really use the Product I paid for and downloaded. The only way I can open up a picture to edit it is to open Photoshop Elements 12 and then then click "Open" and then search for the picture on my hard drive (which takes a lot more time! I did not experience this difficulty at all with versions 4 or 9!

Hi,
You failed to say which Windows system you have - I can get the "Open With" to work on my Windows 7 64bit system.
When you try to set up the "Open With", are you setting the correct target program?
It's the green one (not the red one) in the above image.
Once you have selected that program, make sure you set it as default so that a double click will open the photo in the editor.
Good luck
Brian

When I click on a link in an email, it does not automatically open the site page? When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

When I click on a link in an email, it does not automatically open the site page?
When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

I don't appear to have a toolbar either.

Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

Please disregard this question. I'll submit a shorter and more direct question. Thanks.

IPad (3rd generation) does not automatically connect to wi-fi.

iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I had to reinstall itunes and now when I plug in my ipod itunes does not automatically come up so I can log in, how do I fix this?

I had to reinstall itunes and now when I plug in my ipod itunes does not automatically open to my library or where I can access the itunes store. What do I do now?

Open iTunes and connect your iPod. Select your iPod in iTunes from the Source list. (I'm assuming this still works, although you didn't indicate if it did or didn't.) Make sure the box is checked to Open iTunes when this device is connected. You should be all set!

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences

Lov command link does not get refreshed

We are using Jheadstart 11.1.1.4.26 with Jdeveloper 11.1.1.4 and we think we have found a bug.
The scenario includes two items, an inputtext (FirstName) and an LovItem (ManagerId)
The LovItem (ManagerId) is dependent on the inputtext (FirstName) with Clear/Refresh and has a Disabled Expession #{bindings.EmployeesFirstName.inputValue==null} so that when the Firstname is null the LovItem (ManagerId) is disabled.
This seems to work fine except from the commandLink of the LovItem which does not get refreshed. This is probably because the Id of the commandLink is not included in the componentsToRefresh item inside the EmployeesFirstNameDependsOnItem.
Of course we could create a custom vm for the default/misc/facesConfig/dependsOnItemBean.vm and pass the id of the commandlink but we are looking for a more generic way.
<managed-bean id="__168">
<managed-bean-name id="__169">EmployeesFirstNameDependsOnItem</managed-bean-name>
<managed-bean-class id="__170">oracle.jheadstart.controller.jsf.bean.DependsOnItemBean</managed-bean-class>
<managed-bean-scope id="__171">application</managed-bean-scope>
<managed-property id="__172">
<property-name id="__173">itemsToClear</property-name>
<list-entries id="__174">
<value id="__175">EmployeesManagerId</value>
</list-entries>
</managed-property>
<managed-property id="__176">
<property-name id="__177">componentsToRefresh</property-name>
<list-entries id="__178">
<value id="__179">EmployeesManagerId</value>
</list-entries>
</managed-property>
</managed-bean>
I sent a testcase to '[email protected]' last friday.
Regards
Vasileios

Vasileios,
Thank, I was able to reproduce this. We will fix it in the next release.
Here is how you can fix it using custom templates:
- add the following macro to your custom macros file:
#macro (ITEM_LINK_PARTIAL_TRIGGERS)
partialTriggers = "#foreach($item in $JHS.current.item.dependsOnItems) #if (($JHS.current.pageComponent.hasOverflowRight || $JHS.current.pageComponent.hasOverflowRightWithSplitter || $JHS.current.pageComponent.hasOverflowBelow || $JHS.current.pageComponent.hasOverflowBelowWithSplitter) && $JHS.current.item.displayInTableOverflow && !$item.displayInTableOverflow)${JHS.current.group.shortName}PC:${JHS.current.group.shortName}Tab:#end${item.id}#end" #end
- in the custom formLovItem and tableLovItem templates, add this macro to the commandLink element:
<af:commandLink immediate="true" partialSubmit="true" #ITEM_DISABLED_IN_FORM() #ITEM_UPDATEABLE_IN_FORM() id="#NEW_ID("cl")" #ITEM_LINK_PARTIAL_TRIGGERS()
Steven Davelaar,
JHeadstart team.

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Adobe Reader does not automatically associate with PDF files in Xp Sp3

I have reinstalled Reader (twice) and it does not automatically associate with PDF files.
How do I fix this problem?
Cheers, JH

The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

Artwork does not *automatically* copy to iPod classic

We have 3 ipods in our hosuehold, one classic photo, one 3rd generation photo, and a nano from the latest generation.
All are managed manually.
On the older 2, artwork does not automatically copy across from itunes to the ipod when songs are added. Instead, I have to select each song or album on the itunes library, manually copy the artwork, and then paste it into the iPod. while not crippling, it is certainly annoying.
The nano does not seem to have this problem.
ANybody else have this problem, and is there a way around it?
Of course I have "display artwork" enabled on all ipods, and the software is up to date, on all ipods and on the mac.

I don't manually manage, so my apologies for not being really familiar with it. But my question is, have you noticed that the addition of artwork depends on if the artwork was there from the beginning or not?
In other words, I wonder if when put in a new CD, tracklisting is looked up, you import and artwork gets automatically added. You then drag and drop those tracks to your iPods. Does the artwork show up on the iPod or do you have to do a secondary addition of the artwork?
Versus, if you already had the songs on your iPod, then LATER added artwork to the tracks in itunes, I could see where unless you resynced the songs to the manually managed iPods, that the artwork wouldn't go onto the iPod automatically and would have to be manually added.
I mention this because your Nano is the newest one and I am wondering if the issue is that you have stuff on the older iPods from back before artwork was added to your library. You are now adding artwork, but the songs on the old iPods still have older versions without artwork. The Nano, being brand new, you are probably adding tracks that have since had artwork added and so it maybe seems like it is being automatically added to that iPod and not the others when maybe you just need to re-sync the same tracks to the others?
Again, just some random streams of thought and guessing.
Cheers,
Patrick

Nautilus does not automatically refresh

Similar Messages

Maybe you are looking for