Nautilus problem - FTP transfers hang..

Hay fellow Archors
I need some input on a strange issue, what i cant resolve on my own..
When i connect with Nautilus to an FTP server and tries to copy over a folder to my harddrive the following happens
It counts "prepares" the tranfer and tell me that there are eg 28 Mb and 5000 files and then the transfering stops. The "file operation" window just hangs..
I am running Gnome-Shell and i would like your input how to resolve OR debug this problem..
I have read the wiki and asked google for help, så any ideas would be appiciated.
jb
Last edited by jobr (2011-08-08 20:05:44)

Maybe this is the same problem as described here https://bbs.archlinux.org/viewtopic.php?id=121191
Apparently, it seems to be a bigger problem within the handling of ftp with gvfs.
Actually I use FireFtp for transfering data to or from an ftp server.
Bay teh way: at the moment, I test KDE 4.7 a little bit. With the Dolphin file manager, copying files via ftp seem to work without any problems.

Similar Messages

FTP transfers hang in CS3 for Mac/10.5.4

This is a topic that has been continually raised on this
forum, but never fully solved. I am using Dreamweaver CS3 on Mac OS
10.5.4.
When making a connection to my site's host, the client
connects properly, several files are transferred, then the
connection hangs as Dreamweaver continually tries to upload a file,
but is unsuccessful. This occurs while uploading different pages
with different files. The hang occurs after a few seconds of
activity.
For the record, I have tried both passive and non-passive
transfers, I am not operating behind a firewall, I have altered the
connection timeout settings from everything between 3 seconds to
120 seconds (60 is default). My site uses a fixed IP address and
the problem occurs both on my desktop (Mac Pro) and my laptop
(Macbook Pro) in different locations with different networks.
Background: Dreamweaver MX had this problem, CS2 fixed it,
CS3 has broken it again:
Dreamweaver
FTP problem
Fact: Using the exact same connection settings in Transmit,
the transfers have no problem. Dreamweaver CS2 does not have this
problem, either on Mac or PC.
It's time that Adobe got serious about fixing this. When a
thread exists with 80+ messages of complaint and there is no
resolution, there is a problem.
If anyone can shed light on this, it would be most
appreciated.

Ok, first off that thread was solved from what I read. The
original poster had an issue where they could only connect to their
server via IP address and not the domain name in 10.5.0 and 10.5.1.
They were told to fix the DNS and that the 10.5.2 update solved the
issue from Apple's end when it was released. This is now 10.5.4 so
this problem should be gone from the original poster because that
topic was started in October of last year.
Next, Mac does have a firewall by default like Windows. Look
in the System Preferences->Security->Firewall. Set it to
allow all incoming connections (basically off).
Next, have you gone through the FTP troubleshooting steps?
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834
If you have not gone through those at this point I would
highly recommend starting there. This will eliminate the cause a
bit more. Also on the Mac platform, I do not believe that I have
ever seen DW transfer successfully when Passive FTP is turned off
due to the Mac firewall, so I would recommend leaving that checked
while you test through the above KB article.
If you continue to have issues with the FTP after going
through those steps please post back with the progress.
And one other note. Adobe does not normally check these
forums. If you do require advanced support Adobe does have contact
information which can be found from the link at the top of these
forums (and every page of the site if I am not mistaken).
And lastly, as a suggestion I would recommend downloading the
CS4 beta (
http://labs.adobe.com/technologies/dreamweavercs4/
). All you need to run it past the 2-day limit is your CS3 serial
number. If something is broken in that version you would be more
likely to see it patched before the release as opposed to CS3 which
is on its way out. Also on that page you will find a link to the
CS4 forums which Adobe does check for bugs being that it is a beta
product.

Problem with transfered user sessions from a 10.4 system

On my new MacBook pro with ML, I tranfered the user sessions of my previous mac (power book G4 working with OS 10.4).
With these "old" users accounts, part of the trackpad features (like scroling up and down with 2 fingers) does not work, whereas it is working with new users.
Any idea on how to solve this?
Thanks in advance

That was a good idea, I tried to delete the com.apple.finder.plist and the com.apple.systempreferences.plist but that did not work.
Eventually to solve the problem, I transferred all the files I needed to a session created with the new system. I'm waiting a week or two just to see if I have not forgotten something important and then I will delete the "old session".
Thanks anyway for your help.

Problems in transferring Scheduling Agreements from ECC to APO

Hi All
We are facing a strange problem in transferring scheduling agreements to APO.
When we create the integration model, it shows the selected scheduling agreements and vendors. On activating the integration model in CFM2 or CFM3, we do not get any error.
But when we check in APO, we do not see any scheduling agreements.
Can any one tell us what could be problem or where should we check to identify the issue ?
Best Regards
Mitesh

Hi Mitesh,
Did you try deleting all the integration models in CFM7 and trying again ? You could also try deleting the blocked queues in SMQ1.
Regards
Mukundan

Problems after transfering Cost centers with LSMW

Hi,
I have a problem after transfering Cost Centers with LSMW.
The first Batch input run created all cost centers in one CC Group erroneously - cause they should be placed in different CC groups.
I changed LSMW settings and made another batch input run - now the Cost centers were created in proper groups. I think that I deleted all CC's created in previous batch input run, but now I am not too sure, because there is a problem...
Cost centers exist both in their proper groups and in the one group mentioned by me before. So there is such situation that Cost center appears in Standar hierarchy twice at the same time.
When I delete cost centers - they are removed from their proper groups but the CC entry remains in that one group - all CC are there inactive.
How can I get rid of them. I tried deleting them - but it's impossible - the system doesn't see them.
When I run the batch input again - the same cost centers appear in proper groups and at the same time they become active in the one group. The standard hierarchy group is not UNIQE.
Please advice me how to delete these entries from standard hierachy.
Best wishes,
Karol

Hi,
Always recommended before loading into live system: upload in test system and check. check again just to make sure all is correct before real load.
In your case you probably would have been best to do a group change after incorrect upload.
Do Ambiguity check in stadnard hierarchy to explore all incorrect entries. Depending on your version yo ucan change in that function (ECC6) ore need to run a report. Before running the report check that CC master records have correct entry. The report is RKCORRH1
Again, try in QA first and run in Test Run
Good luck
Hein

Problem with program hanging randomly on certain commands from win 7 pro client to SB Server

Having a problem with program hanging randomly on certain commands from Win-7 Pro Client to SB Server Both 64-Bit
Five other slower XP-Pro 32 Bit systems though they are older and slower systems do not seem to hang as readily if at all.
It has been very frustrating as the Client-System, SB-Server and Program should work w/o any hitches, but this seems to work fine @ times and then hang randomly.
Would appreciate any and all suggestions in assisting.... JimBAgde-MSS

You can try this, as I have had similar problems with another MS Access .MDB file and slow access before. This fixed my problem for me. On the slow computer, make sure the program is set to see the .mdb file via UNC path, not a mapped drive letter. ex.
USE: \\yourserver\shared\dental\file.mdb
DO NOT: S:\\shared\dental\file.mdb
hope this helps

HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

Try:
iTunes: Finding lost media and downloads
iTunes: How to re-create your iTunes library and playlists
Next try:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Problem with transferring garageband track from iPad2 to macbook

Hello,
I have a problem with transferring track from Garage band 2.0 on iPad2 to a new macbook pro (oct2013).
I saved a track on macbook via iTunes but when i`m trying to open it on Garageband it shows an error.
I have updated all soft recently. So it couldn't be true.
Could you please help me to solve the problem?
Thank you very much!

What software are you running on your MBPr? Are you using MacOS X 10.8.5 or MacOS X 10.9? Probably you need to update your MBPr to Mavericks and GarageBand 10.0.0.

Problems with transferring iTunes Library to new iMac

I am having a problem with transferring my iTunes library to my new iMac. I have read many of the suggestions posted in this forum along with numerous articles on other sites. I have not seen anyone describe my exact problem.
When I got my new iMac, I used Migration Assistant to transfer everything (files, applications, settings, etc.) from my old iMac to the new iMac. On my old iMac, the iTunes music folder (i.e., the actual mp3s) are on an external HD, while the iTunes Library file (the database and xml files) were in the /user/Music/ folder on the old iMac.
After the Migration Assistant was done, the /user/music/ folder and the library files were copied to the new iMac, but the iTunes music folder was not. It is still on the external HD.
If I open iTunes on the new iMac, iTunes shows me all of my songs, but if I play one, I get the "song can't be found; do you want to find it" error. In iTunes preferences on the new iMac, the "iTunes music folder location" is the new iMac.
I have the 2 iMacs connected by a firewire cable, but neither iMac recognizes the other computer as being on the same network. That is, in Finder on the new iMac, I cannot see the external HD of the old iMac.
I can't change the library location on the old iMac, because the new iMac does not appear in Finder or in the "Change Music Folder Location" dialog box.
I want to move the music folder (the actual mp3s) from the external HD of the old iMac to the INTERNAL HD of the new iMac. I don't need to keep them on the old IMac, as I will be selling that computer. Of course, I want to keep all my playlists, artwork, etc from the old library.
Does anyone have a suggestion?
Thanks.

Never mind. Figured it out. I attached external HD to new iMac and consolidated. Duh.

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

Problems with updatemanager hanging

Hello,
I was just wondering if other people are having problems with updatemanager hanging when you install patches. Quit frequently we have problems where the updatemanger will get 75% done and just hang. I have even let it sit over the weekend on our test boxes and it does not proceed. You can click on cancel and the same thing nothing happens.
What is the recommend procedure for stopping updatemanger when this happens. I am assuming a kill -15, I was hoping for something more graceful with less risk.
Thanks,
Gary

Update Manager community:
First, thanks to David Holmes for his suggestion that this is a Java bug related to the PKCS11 library forking problem. This is, at the very least, consistent with my observations: when things hang, it appears to hang in the java process and never seems to get where you see the various pkgadd and pkginstall processes get started.
I've made the suggested re-ordering of security providers in /path_to_java/jre/lib/security/java.security and will be watching anxiously to see if this resolves things.
Mr. Forum Moderator, have you and the other folks in UpdateManager-cental evaluated Mr. Holmes observation that this is the cause of many of the updatemanager hangs problems?
While I'm waiting to see if the changes to java.security change things, here is the set of things that I've found that help me to deal with updatemanager.
Note: my experiences apply to Solaris 10 (now u5) x86. Specifically, I am running on 3 nearly identical X4100 M2 platforms. The hanging problem seems to be intermittent in that sometimes 2 machines will update just fine and the third one will hang and it is not always the same machine that hangs. Other times, all 3 will update without hanging. When it does hang, however, prstat shows that the pkgadd, pkginstall, and related programs and scripts that do the real work never get fired off. And, as others have observed, once updatemanager hangs in this fashion, the "Cancel" button doesn't help either.
So, when things hang, these are the things that I've found to help in allowing me to restart to see if things will proceed properly the next time.
1. ps -ef | grep update
That usually shows 2 processes related to updatemanager (one a shell script and one the actual java program) and two instances of smpatch with a list of patches.
2. kill those 4 PIDs found in step one.
3. rm /var/sadm/spool/sunucLog/job_history.log.lck
If this *.lck file is still in place, updatemanager won't even check for new patches.
4. rm /tmp/.ai*
There is sometimes a file that starts with /tmp/.ai_and_a_very_long_string .... I don't know what it does, but it seems to need to be removed for another updatemanager run to be started.
5. ps -ef | grep ccr
This usually shows 2 or more cc-ccr processes. I believe that these also need to be killed (sometimes with a kill -9) and you probably need to check to make sure that init doesn't restart these.
I certainly don't claim to be an expert on these matters .... but, at the very least, I've found that these steps help me to deal with a hanging updatemanager.
Of course, I'm hopeful that David Holmes' observations related to the PCKS11 library bug turns out to be the identification of the underlying problem .... and I thank him again for his Java debugging skills and digging through the bug database.
Thanks,
John

I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

With iTunes 11 you can enable the left-hand sidebar via control-S on a PC, option-command-S on a Mac. If you are trying to get it to the iBooks app then with the sidebar enabled the process should be similar to how it was on previous versions of iTunes e.g. add it to your iTunes library via File > Add To Library, connect the iPad and select it on the left-hand sidebar, and then use the Books tab on the right-hand side to select and sync it to the iBooks app.

Hi.. i am finding problem in transferring .avi file from dektop to itunes

hi.. i am finding problem in transferring .avi file from dektop to itunes

iTunes does not support .AVI files. However, you can use iSquint to convert the file to an Apple-Friendly format (Its free, and really easy to use) http://isquint.en.softonic.com/mac

Re: Problem with transferring of data to non sap by using FTP funtion modul

Hi all,
         I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
like FTP_CONNECT
FTP_COMMAND
FTP_R3_TO_CLIENT
FTP_DISCONNECT
But text file details are coming like this
means even line items are all displaying in one row.means continously all line items are coming just like this.
0001000264,070914,,,1000,Steel (pune) Plant,
Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
Actually here problem is text file data is continously coming with ','
means actually those values has to come as
         0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
        0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
How to split those records when sending the text file.
This is very big issue.I am unable to complete this issue.
Please if any one knows the solution please guide me.
please help me.
Thanks & Regards,
J.Goud

Hi all,
         I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
like FTP_CONNECT
FTP_COMMAND
FTP_R3_TO_CLIENT
FTP_DISCONNECT
But text file details are coming like this
means even line items are all displaying in one row.means continously all line items are coming just like this.
0001000264,070914,,,1000,Steel (pune) Plant,
Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
Actually here problem is text file data is continously coming with ','
means actually those values has to come as
         0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
        0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
How to split those records when sending the text file.
This is very big issue.I am unable to complete this issue.
Please if any one knows the solution please guide me.
please help me.
Thanks & Regards,
J.Goud

Problem with transferring of data to non sap by using FTP funtion modul

Hi all,
         I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
like FTP_CONNECT
FTP_COMMAND
FTP_R3_TO_CLIENT
FTP_DISCONNECT
But text file details are coming like this
means even line items are all displaying in one row.means continously all line items are coming just like this.
0001000264,070914,,,1000,Steel (pune) Plant,
Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
Actually here problem is text file data is continously coming with ','
means actually those values has to come as
         0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
        0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
How to split those records when sending the text file.
This is very big issue.I am unable to complete this issue.
Please if any one knows the solution please guide me.
please help me.
Thanks & Regards,
J.Goud

Hi,
     Thanks for reply.
Hi all,
            My problem was solved.But I have used GUI_DOWNLOAD.
    But i want to place the file name with increasing order number.
Just like suppose 1st i am placing file name as PO000051.txt
next time the file name has to be placed with increasing order like PO000052.txt
I am generating the number in my program actually i am using like this.If i keep file name as
190.0.18.65\qdls\ITGSAP_P\PO000052.txt means only it will place only that file how to increment that number. i am not getting.
If i am keeping
190.0.18.65\qdls\ITGSAP_P\g_file   like this means file is not placing.
pls help me if any one knows solution.
CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
          BIN_FILESIZE        = ' '
          CODEPAGE            = ' '
            FILENAME            = '
190.0.18.65\qdls\ITGSAP_P\g_file'
          FILETYPE            = ' '
          MODE                = ' '
          WK1_N_FORMAT        = ' '
          WK1_N_SIZE          = ' '
          WK1_T_FORMAT        = ' '
          WK1_T_SIZE          = ' '
          COL_SELECT          = ' '
          COL_SELECTMASK      = ' '
      importing
           filelength          =
       TABLES
            DATA_TAB            = ist_file
          FIELDNAMES          =
       EXCEPTIONS
            FILE_OPEN_ERROR     = 1
            FILE_WRITE_ERROR    = 2
            INVALID_FILESIZE    = 3
            INVALID_TABLE_WIDTH = 4
            INVALID_TYPE        = 5
            NO_BATCH            = 6
            UNKNOWN_ERROR       = 7
            OTHERS              = 8.
Regards,
j.Goud

Nautilus problem - FTP transfers hang..

Similar Messages

Maybe you are looking for