Nautilus + SVG icon theme = slow downs?!
Hi, ive installed the Snowish icon theme which i found pretty nice. I went for the SVG version instead PNG but later on day i experienced pretty heavy slowdowns when starting nautilus or when the file selecting dialog appeared. veeeery choppy behaviour :?
selecting tango then as my icon theme let those problems disappear so this has to be a problem there. but starting nautilus from terminal gives no output at all, maybe those icons itself are the problem not nautilus? whats goin on here
detto wrote:Hi, ive installed the Snowish icon theme which i found pretty nice. I went for the SVG version instead PNG but later on day i experienced pretty heavy slowdowns when starting nautilus or when the file selecting dialog appeared. veeeery choppy behaviour :?
selecting tango then as my icon theme let those problems disappear so this has to be a problem there. but starting nautilus from terminal gives no output at all, maybe those icons itself are the problem not nautilus? whats goin on here
The SVG slow-down problem begins with gtk 2.10. The file chooser is seriously affected too. No fix I think, just use png icons.
Similar Messages
-
I have the GNOME desktop environment installed, and Nautilus as my file manager. I am using a custom icon theme in GNOME, installed in /usr/share/icons, and it's working for every app - but nautilus.
Nautilus doesn't seem to use the icon theme, unless I run it as root? What is causing this problem, and as important, how do I fix it?mrunion wrote:Have you checked the permissions on the theme you installed in /usr/share/icons to make sure others besides root can read it?
Sorry I didn't reply, I was absent over the weekend. The permissions for the icons are rwxr-xr-x so Nautilus under any account should be able to access it. Other programs do respect the icon theme btw. -
i have a bunch of my icon themes in an .icons directory in my home directory. all the themes i have in there show up but the ones that only consist of one folder of icons labeled 'scalable'. they don't show up in openbox, or xfce. am i missing a library, or something? not as bright as i thought i was?
Firstly - Thank you both for the feedback.
I have solved the first part of my challenges at least.....
The data was from a US source, and hence the themes referenced map tables such as MAP_RIVERS_US
but the actual tables themselves were MAP_RIVERS_CA
This would cause the WHERE clause above not to include it as table_name<>base_table value...
I have renamed the tables ending in CA to US as this was easier than modifying all the theme definitions. Now they are showing up in the ALL_SDO_THEMES view and at least some of them are previewable in Oracle MapBuilder (others still coming up blank-not usre yet why)
On we go....thanks again for your help! -
Hi Everyone. I have an old Mac Book with software updated to 10.6.8. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive? Pls.help. Tks.
Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing! -
I have iMovie '11, and I can't find how to slow down the "credits" I've typed in at the end of my movie. I guess
it would be the scrolling speed.Credits scroll at the speed that is necessary for the scrolling to complete by the end of the clip. So, to slow them down, simply prolong the duration of the scrolling credits title clip by selecting and draggging out the yellow boundary.
Geoff. -
Open ports slow down my internet connection. How to close them? What to do?
My MacBook Pro has massive problems with internet connectivity. At times the connection is blazingly fast, at times unbelievably slow.
I've spoken to my internet provider who was able to inform me that my computer opens up 500-700 ports which is probably what's slowing down the network connectivity. When I'm online with the MacBook Pro, the web gets unstable – also for other connected devices like iPad etc.
The web supporter asked me to run an anti-virus scan which I did – with no results. The problem persists. When my MacBook Pro is not online, there are approximately 15 ports open, when I log on the web that number increases to between 500 and 700.
Is this normal?
Can anyone tell me how to solve this issue?
How do I figure out which application opens these ports? (and how to close them?)
I tried logging into another user account on the computer and the problem seemed to disappear, indicating that it is caused by something run only on my user account.
Hope someone can help me..Open ports don't slow down your computer. The tech support person you spoke to doesn't know what they are talking about.
Basically, when you are using a web browser, opening a page means that the browser needs to open a connection for each element in the page (e.g., it needs to grab each picture, CSS, and JavaScript file that the page requires). This could be a couple of dozen, or it could be hundreds (and there's no telling what Flash content on the page will do). The browser tries to mitigate things a bit using a cache (you might check to make sure the cache is turned on, but this is the default setting). However, this is how all browsers work and how the whole system is designed to operate. You cannot "close" any ports, and they don't linger open, they remain open only as long as data is being transferred. This is expected and appropriate behavior.
The most likely culprit is that you are receiving poor DNS service from your service provider. Every time the computer sees an address like 'http://www.google.com', it needs to send out a request to figure out what numerical address goes with the human-readable name. If the DNS service your system is assigned to use doesn't respond lightning-quick, your experience is going to be very sluggish.
You might want to add an external DNS service to your list of DNS providers. Go to System Preferences > Network, select the network you are using on the left (Ethernet or AirPort), and click the 'Advanced' button. Click on the 'DNS' tab, then press the '+' button under the left panel. I would add the OpenDNS.com DNS servers. Add the following DNS addresses:
{quote}
208.67.222.222
208.67.220.220
{quote}
Click the 'OK' button. And then the 'Apply' button to save the changes.
That will probably fix the problem. If it doesn't the next most likely issue is either network congestion (e.g., your ISP's network is just too busy; a very common thing for small ISPs and cable Internet service), or the remote site that you are trying to contact is simply not performing so well. -
Songs are slowed down after I save them in Garageband
I am new to recording and macs altogether so bear with me. I am running an MBox 2 as my USB interface with Garageband into a Macbook Pro 2.16GHz. When I record, everything works fine and I'll save it. Then when I open it again and listen to it, the playback is much slower than when I recorded it but in the right key. I'm not sure if I need to reset the tempo or what, but I can't seem to save any song and then reopen it without it being slowed down considerably.
Any thoughts?I am in the same boat as you, but with a tad bit more experience. Have had an MBP for about 2 months now, MBOX 2, and do a lot of recording with GarageBand.
Something that I have come to understand is that recording software such as Garageband or Pro Tools (which I use occasionally) has to retrieve files that are on the HARD DRIVE in order to play them back, while they are being played back. Therefore, if one did not know that HARD DRIVE speed was important (which I did not), you're a bit out of luck. There are two speeds of hard drives optional on the MBP, one is around 7000 and one is around 5000, unfortunately for me, I bought the 5000, and so playback is sometimes slow, and its frustrating.
Here's what I would suggest. First, export what you have of your song that is slowing down into iTunes and then play it. See if it plays back in iTunes at the speed you recorded it.
If it does... Go to the optimizing garage band performance page and do everything in all steps. Free up any available hard drive space you can (don't delete anything necessary but do what you can)... turn bluetooth off... leave all other applications off. .... All of these steps have helped me out a ton and I am able to mix at the speed I recorded.
If for some reason your problem is different from what I've experienced, lemme know and I'll look into it.
Peace
Bweb -
I have Firefox add on's such as Weather-bug and Reminder. I want to know if these add on's can slow down my computer. They seem to be doing that. And, if I need to delete these add-on's from my computer. How would I go about doing that?
Thank You,
Gary W. LusterJust to the right of your post, you should see an "Edit this post" link. Click that, and then next to the subject text just above the message text edit box, you should see an "edit" link. Use that to remove your email address.
To remove an add-on, go to the Add-ons menu item. In Firefox 4 that's on the FireFox menu (upper left corner of the window). In older versions it's on the Tools menu. Then you want to choose the Extensions tab, and find the add-on you want to remove. It should have a Remove button next to it. -
MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation
Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Is there a way to slow down the playback of video in Captivate 5?
I just made several recordings (FMR) and would like to slow them down for the viewer. The video was actually of someone else's software demo that moved way too fast. On the Captivate skin there is "2x" to move the video twice as fast, but no "1/2x". Is there another way to slow down the video?
Thank you!No. Not there. Honest.
When I go to Edit + Preferences, I see a menu on the left.
General Settings:
Show Welcome Screen (checked)
Generate Project Backup (unchecked)
Default Locations (I set this to my output folder)
Project Cache (I set this to my C:\ drive)
Comments At: (blank)
Grid Size: 16
Spelling Preferences
Confirmation Messages
Defaults:
Background Color: white
Object Defaults:
Select: Text Caption (or highligh box, or image, or smart shape)
Display For: Specific Time 3 secs
Default Style: Default Caption Style
Restore Selected Button
Restore All Button'
General
Autosize buttons
Autozize Captions
Calculate Caption Timing
Recording:
Settings:
Generate Captions in: English
Audio Options:
Narration
Actions in Real Time
Camera Sounds
Hide:
Recording Window
Task Icon
System Tray Icon
Others: Move New Windows Inside recording Area
Smoothen movements for:
Drag and Drop Actions
Mouse Wheel Actions
Video Demo Settings button:Video Demo Recording
Show mouse in video demo mode
Working folder (mapped to my C:\ drive)
Keys
To stop recording: End
For Automatic panning: F4
For Manual Panning: F3
To stop panning: F7
To snap recording window to mouse: F11
To toggle mouse capture in video mode: F12
restore Defaults button
Project
Information
Author
Company
E-mail:
Website:
Copyright:
Project Name:
Description:
Publish Settings:
Include Audio (checked)
Publish Audio as Mono (checked)
I don't see anything in the whole menu that says anything about fps. What am I missing? Thanks! -
How do I fix a Safari application that slows down and freezes everything?
Apple called last fall and said my particular Mac had a hard disk problem and they replaced it at the Apple store in late January 2013. I backed up the information on an external harddrive and used Time Machine before to transfer all the information to the new drive. Everything worked well and I finally put on Mountain Lion at 10.8.4. I also have Carbonite as a backup and it apparently was not enabled when I transferred the files until early May. In early May I had not used my iMac for about a month and when I started it I found about 40 named file folders on the Desktop that were empty. Some of those had named items in them but when I clicked on them they would dissappear. The actual files did exist and were not effected when I dumped the apparent alias folders. Safari started and would be ok at first but if I went away for an hour it would slow down. I took it in to the Genius Bar at Apple and they ran some tests and got rid of MacKeeper which they felt was causing the problem. I got my Mac back home and it still started slow but worked well at first and then started going slow. If I opened Word it would also start working at a slower speed. I needed to force quit Safari and the Word progran in order to quit or restart the Mac. I got an appointment for the next day and they ran all sorts of tests and the hard drive was working normally. They tried tweeking different areas and sent me home again. When I started working again it did the same thing, I would start out fine and eventually slow down and needed to be force quit to get out of it. A message came up indicating my MasOSX startup disk had no more space available for applications memory. I took it in a third time and the Genius went to the Activity Monitor and the Safari PID was 221 and %CPU 107, Threads 21 Real Mem 2.73 GB, Virtual Mem 22.00 Kind, Intel (64). I had no idea what that meant. I went home again and it still ran slow and couldn't run the programs for any length of time before it ran slow and affected the other programs so they would only quit if I used Force quit. I took it in for the forth time an they decided to keep it overnight. They ran ASD first to rule out memory. They noticed during the appointment the computer was slow to perform normal tasks such as showing boot options, booting into user, bootingto external user. If the ASD passed then they would perform erase and install and only restore users and application files from backup drive. They did this on Wed and Thur. night and I took it home Friday night, June 14 and it still has the same problem. Typing this message right now means typing and waiting for the words to appear.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
Imac slowing down after installing citrix and Office
Hi
I have noticed a slight slowing down in the responsive of my imac (surfing net / carrying out tasks).
I have plenty of storage space and the only changes made recently are installing Citrix and MS office.
Does anybody have any suggestions?
Many thanks
PaulLaunch the Console application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why is my iMac slowing down? Have EtreCheck info. Could someone check?
Hi, I would love for someone to help me work out why my iMac is starting to slow down. Do I need to get more GB?
Problem description:
iMac has started to slow down, a lot of applications taking a while to load and sometimes freezing, going from application to application there is a lag. Just wondered if there is a problem with the iMac or I just need to bump up the memory..
EtreCheck version: 2.1.6 (109)
Report generated 25 January 2015 11:42:14 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 0:33:38
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (743.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader 7.95 GB
NO NAME (disk1s1) /Volumes/NO NAME : 7.94 GB (195 MB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[not loaded] com.pctools.iantivirus.kfs (1.0.1) [Support]
[not loaded] com.wacom.kext.pentablet (5.2.1) [Support]
[not loaded] com.wacom.kext.wacomtablet (6.1.7) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[loaded] com.adobe.CS4ServiceManager.plist [Support]
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[running] com.wacom.pentablet.plist [Support]
[running] com.wacom.wacomtablet.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.adobe.versioncueCS4.plist [Support]
[failed] com.autodesk.backburner_manager.plist [Support] [Details]
[running] com.autodesk.backburner_server.plist [Support]
[failed] com.autodesk.backburner_start.plist [Support] [Details]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.linotype.FontFolderProtector.plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
FontExplorerXAutoload Application Hidden (/Users/[redacted]/Library/Application Support/Linotype/FontExplorer X/FontExplorerXAutoload.app)
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uTorrent UNKNOWN (missing value)
iAntiVirus Application Hidden (/Applications/iAntiVirus/iAntiVirus.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 1.1.0-4 [Support]
OVSHelper: Version: 1.1 [Support]
Default Browser: Version: 600 - SDK 10.10
WacomSafari: Version: 1.1.0-4 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Support]
DivX Web Player: Version: 3.0 - SDK 10.5 [Support]
AdobePDFViewerNPAPI: Version: 10.1.13 [Support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.287
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
AdobePDFViewer: Version: 10.1.13 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 [Support]
Flash Player [Support]
Perian [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 255.63 GB
Destinations:
My Passport [Local]
Total size: 499.95 GB
Total number of backups: 35
Oldest backup: 2013-09-23 18:40:17 +0000
Last backup: 2014-04-20 08:44:46 +0000
Size of backup disk: Too small
Backup size 499.95 GB < (Disk used 255.63 GB X 3)
Top Processes by CPU: ℹ️
11% WindowServer
7% com.apple.dock.ecap
4% ocspd
2% Spotify
1% Safari
Top Processes by Memory: ℹ️
163 MB FontExplorer X Pro
163 MB Spotify
159 MB Finder
131 MB com.apple.WebKit.WebContent
112 MB Safari
Virtual Memory Information: ℹ️
24 MB Free RAM
1.61 GB Active RAM
1.61 GB Inactive RAM
882 MB Wired RAM
3.26 GB Page-ins
18 MB Page-outs
Diagnostics Information: ℹ️
Jan 25, 2015, 11:10:39 AM /Library/Logs/DiagnosticReports/backburnerManager_2015-01-25-111039_[redacted]. crash
Jan 25, 2015, 11:09:21 AM Self test - passed
Jan 24, 2015, 03:12:46 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-24-151246_[ redacted].cpu_resource.diag [Details]
Jan 24, 2015, 02:49:15 PM /Library/Logs/DiagnosticReports/backburnerManager_2015-01-24-144915_[redacted]. crash
Jan 24, 2015, 01:15:09 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-24-011509_[ redacted].cpu_resource.diag [Details]
Jan 23, 2015, 10:08:57 PM /Library/Logs/DiagnosticReports/System Preferences_2015-01-23-220857_[redacted].hangFirst, removing "iAntiVirus" will have no effect if you're running Yosemite, because it doesn't load in Yosemite.
Back up all data immediately if you haven't already done so. You should have done that before doing anything else.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
I just downloaded Mountain Lion and I have noticed a severally impact on my system. Everything takes a long time and has slowed down from the synced iphone, iphoto, pages, and even itunes. I have never had this problem till this new operating system. I have the color wheel to open most things and it thinks a lot. I have 20 gigs of music, 40 of shows, and a few files saved. any similar problems?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have created a tiled layer (javax.microedition.lcdui.game.TiledLayer) for the purpose of making a World for my sprite to move around in. The game world i want is just a big box with a wall round the outside and grass inside that box. As I increase the size of the tiled layer the application runs slower & slower. Is this because :
(B.T.W -- An instance of LayerManager controls drawing the level)
The application draws the whole tiledlayer (onto the offscreen buffer) but only shows whats appropriate to the view window.
The application calculates which bit of the tiledlayer needs to be drawn to the view window, but as the tiled layer gets larger, the calculations become alot more complex (therefore slowing the app down)
I cant really think of any other way of drawing a large background without slowing down the application. If i use sprites I will end up with 400 of them (One for each tile), and that would slow the application down to miniscule rates( especially when I try to calculate collision detection for about 80 tiles)
This is the code use for constructing a simple level:
*MAIN GAME CLASS
public class Level extends TiledLayer
*Dimension Fields - Constant after intitialisation
/*The width of the square tiles that make up this layer*/
static int TILE_WIDTH = 34;
/*The Height of the square tiles that make up this layer*/
static int TILE_HEIGHT = 34;
/*This gives the number of squares of "texture" to put along
the screen -- Changing this to 10 means a smaller level but faster game*/
static int INITIAL_COLUMNS = 23;
/*This gives the number of squares of "texture" to put along
the screen -- Changing this to 10 means a smaller level but faster game*/
static int INITIAL_HEIGHT = 23;
public Level() throws Exception
super(INITIAL_COLUMNS, INITIAL_HEIGHT, Image.createImage("/icons/Level.png"), TILE_WIDTH, TILE_HEIGHT);
/*Quickly fill some cells*/
fillCells(1, 1, 20, 1, 1);
fillCells(1, 1, 1, 20, 1);
/*sets object position*/
setPosition (0, 0);
void reset()
setPosition (0, 0);
}I didn't see it in your code but I am sure you are using a for(x;x;x) loop to draw the scene.
Yes, your are correct, your slow down is that all of your map is being processed as if it were all going to be drawn to the screen. You have to write the code that avoids this. On your 10x10 you are running the loops 100 times, but when you increase the size to 23 by 23 you are running the loops 529 times every time you have to redraw the scene. The solution is to set up some tracking variables and put them in your loop so we only have to run the loops 81 times, no matter how big the map is.
Something I have been trying lately is drawing all of my layers in one for loop.
map_width = 32; // this is the size of the map
map_height = 32; // not all of the map will fit in the screen
width = 9; // this is the tile size of the screen
height = 9; // 9 tiles wide, 9 tiles high
character_x_possition = (possition x on the map divided by 34 which is your tile width);
character_y_possition = (possition y on the map divided by 34 which is your tile width);
corner_x = character_x_possition - 4; // or 5?, just try it, I can't remember
corner_y = character_y_possition - 4; //or 5 again
for(int x = corner_x; int < corner_x + width; x++)
{ for(int y = corner_y; int < corner_y + height; y++)
Draw layer 1 to backbuffer
if(x == char_possition && y == char_possition)
{ Draw Character to back buffer }
else { Draw layer2 to back buffer}
Draw layer 3 to back buffer
Draw back buffer to screen
//////////// END OF SORT OF CODE :-) /////////////
You can also use something similar to cut out time in colision checking, theres no since in checking the entire scene for colision when there are only 9 possible colisions at a given time, there are also some advanced meathods such as quad trees, but these at the moment are beyond me until I can find the time to sit down and study them. Hopefully some else will post on these, but they be beyond the needs of your game. I breifly read over them and went with the 9 tile checking for my game.
One other note, if this is an rpg, there is rarely benefit for an offscreen NPC to be moving. :-)
Maybe you are looking for
-
Scanning a 35mm slide film and trying to get it a certain image size and resolution
Hi All, I am using the Nikon Super CoolScan8000 and Vuescan program to scan a slide film. I am scanning at this setting: scan resolution 4000 dpi. I have to make it a certain dimension that someone has been asking me for. They want the image at Width
-
Is the a way to use iBooks to run a presentation
I have a client who has created a iBooks presentation they want to have a master ipad that will tell the client ipads to move to the next page, is this possible?
-
Credit Card issue to create Deliveries
Hi, Hereu2019s the situation. We have 2 types of Orders. DROP SHIP ORDERS - The part to be shipped is actually in an inventory managed location. No transfer order need to be created. This sales order has a Credit Card that is denied. NOTE: The order
-
hello, someone knows how to use variant utilit85? I get the error 'Input operand can only be provided by the secondary installation' All the secondaries installations were built with appropriate role (consumption and distribution determination) and h
-
Is there an ipad app where I can write notes in meetings and convert it to text
is there an ipad app where I can take handwritten business notes and convert it to text?