Nautilus will not Start after system update

I just updated my system with "pacman -Syu" and it now will not open the nautilus file manager. Looking inside the journal it shows the following error:
gnome-session[647]: Window manager warning: Log level 16: AT-SPI: Error in GetItems, sender=(null), error=Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Here is a list of files that was just upgraded:
[2014-08-31 15:27] [PACMAN] Running 'pacman -Syu flashplugin'
[2014-08-31 15:27] [PACMAN] synchronizing package lists
[2014-08-31 15:27] [PACMAN] starting full system upgrade
[2014-08-31 15:28] [ALPM-SCRIPTLET]  >>
[2014-08-31 15:28] [ALPM-SCRIPTLET]  >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2014-08-31 15:28] [ALPM-SCRIPTLET]  >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2014-08-31 15:28] [ALPM-SCRIPTLET]  >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2014-08-31 15:28] [ALPM-SCRIPTLET]  >>
[2014-08-31 15:28] [PACMAN] installed flashplugin (11.2.202.400-1)
[2014-08-31 15:28] [PACMAN] upgraded avahi (0.6.31-12 -> 0.6.31-13)
[2014-08-31 15:28] [PACMAN] upgraded bash (4.3.022-1 -> 4.3.024-1)
[2014-08-31 15:28] [PACMAN] upgraded bluez (5.22-1 -> 5.22-2)
[2014-08-31 15:28] [PACMAN] upgraded poppler (0.26.3-1 -> 0.26.4-1)
[2014-08-31 15:28] [PACMAN] upgraded cups-filters (1.0.57-1 -> 1.0.58-1)
[2014-08-31 15:28] [PACMAN] upgraded libgcrypt (1.6.1-1 -> 1.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded libsystemd (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded systemd (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded device-mapper (2.02.109-1 -> 2.02.109-2)
[2014-08-31 15:28] [PACMAN] upgraded libtasn1 (4.0-1 -> 4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gnutls (3.3.6-1 -> 3.3.7-1)
[2014-08-31 15:28] [PACMAN] upgraded gstreamer (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-base-libs (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-libav (1.4.0-2 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-bad (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-base (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] installed zita-alsa-pcmi (0.2.0-1)
[2014-08-31 15:28] [PACMAN] installed zita-resampler (1.3.0-2)
[2014-08-31 15:28] [PACMAN] upgraded jack (0.124.1-1 -> 0.124.1-3)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-good (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gtksourceview3 (3.12.2-1 -> 3.12.3-1)
[2014-08-31 15:28] [PACMAN] upgraded imagemagick (6.8.9.6-1 -> 6.8.9.7-1)
[2014-08-31 15:28] [PACMAN] upgraded libnl (3.2.24-1 -> 3.2.25-1)
[2014-08-31 15:28] [PACMAN] upgraded libpcap (1.5.3-1 -> 1.6.1-1)
[2014-08-31 15:28] [PACMAN] upgraded libtracker-sparql (1.0.2-1 -> 1.0.3-1)
[2014-08-31 15:28] [PACMAN] upgraded libwacom (0.9-1 -> 0.10-1)
[2014-08-31 15:28] [PACMAN] upgraded libxkbcommon (0.4.2-1 -> 0.4.3-1)
[2014-08-31 15:28] [PACMAN] installed thin-provisioning-tools (0.3.2-1)
[2014-08-31 15:28] [PACMAN] upgraded lvm2 (2.02.109-1 -> 2.02.109-2)
[2014-08-31 15:28] [PACMAN] upgraded man-pages (3.70-1 -> 3.71-1)
[2014-08-31 15:28] [PACMAN] upgraded ntp (4.2.7.p446-2 -> 4.2.7.p465-1)
[2014-08-31 15:28] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2014-08-31 15:28] [PACMAN] upgraded pacman-mirrorlist (20140706-1 -> 20140823-1)
[2014-08-31 15:28] [PACMAN] upgraded poppler-glib (0.26.3-1 -> 0.26.4-1)
[2014-08-31 15:28] [PACMAN] upgraded spice-gtk3 (0.24-3 -> 0.24-4)
[2014-08-31 15:28] [PACMAN] upgraded systemd-sysvcompat (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded tcl (8.6.1-1 -> 8.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded telepathy-farstream (0.6.1-1 -> 0.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded tracker (1.0.2-1 -> 1.0.3-1)
[2014-08-31 15:28] [PACMAN] upgraded tzdata (2014e-1 -> 2014f-1)
[2014-08-31 15:28] [PACMAN] upgraded webkitgtk (2.4.4-1 -> 2.4.5-1)
[2014-08-31 15:28] [PACMAN] upgraded webkitgtk2 (2.4.4-1 -> 2.4.5-1)
would any of these packages cause this? Thanks.
Last edited by djmwj1 (2014-08-31 23:15:33)

Please edit your post to use BBCode Code tags around program output.  That reference link is also below every post box on the forums.   Thanks.

Similar Messages

  • Firefox will not start after interrupted update to 5.0

    Lenovo x200 | Windows 7 32bit | Firefox 5.0
    I was updating Firefox from version 3.6 (I think) to 5.0. Simultaneously I had done a update on Windows that seemed to have stopped. The update of Firefox had also come to a stop. As I remember it the installation was complete, and I was attempting to start the program, when Firefox was checking compatibility with installed plug-ins and so forth.
    The Windows updates installed fine afterwards but after several reinstalls of Firefox, I still can't seem to get it to start.
    There is no error message or notification at all when trying to start Firefox.
    One processes is created, staying steady at 50% CPU and 26 404 K memory.
    If i try to open another instance of Firefox I get a process that takes 0% CPU and about 1 844 K memory.
    Summary:
    Firefox fails to start after interrupted update to 5.0 from 3.6.
    There is no error message.
    Firefox never starts (and the process never shuts down), just shows in the Task Manager under Processes steady at 50% CPU and about 26 000 K memory (I've seen it do this for at least 20 minutes, before terminating it).

    Thanks kenton. But now pop-up says beta 5.
    The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
    The machines are identical IBM T60s with Windows XP.
    This is a real mystery, as well as being annoying.
    A clue or suggestion any one?

  • Firefox will not start after an update.

    I have to manually uninstall Firefox and manually install the update every time.
    I asked a similar question before. The response was to start in safe mode. BUT the program will not start. It acts as if there is a software switch set to "don't run this program under any circumstance." The switch is either in the registry or among the program files, because these both get cleared on a manual uninstall. The update procedure is not clearing the registry or the program files.
    Does the update process uninstall the previous version and then install the update version?
    Part 2 --
    I often cannot find the update manually on the Firefox site.
    I am on the Beta release channel. The current release is 33.0 beta 4. However, the most recent on the site is beta 3. Where is 33.0 beta 4?
    OS is Windows XP latest release.

    Thanks kenton. But now pop-up says beta 5.
    The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
    The machines are identical IBM T60s with Windows XP.
    This is a real mystery, as well as being annoying.
    A clue or suggestion any one?

  • My iPad will not sync after system update and returns message that my computer is no longer authorised.

    Please help me sync my iPad as it is not able to sync after a system update.  Several messages 1. Computer no longer authorised and when I reauthorise it it prepares to sync and then it tells me my iPad cannot be written to,

    Hi leefromwoodford,
    The following article will tell you how to transfer purchased music from your iPhone to the your Mac -
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Specifically -
    Transferring purchases
    If your iPhone, iPad, or iPod has your purchased content from the iTunes Store, you can transfer the content to a computer that is authorized for your Apple ID.
    Note: This option only works for content you purchased from the iTunes Store (as opposed to content from other sources, such as CDs you may have imported). For content you did not purchase from the iTunes Store, synchronization occurs in one direction only. This means your content can be copied from a computer to your iOS device, but cannot be copied from your device to a computer.
    Open iTunes.
    From the Store menu, choose Authorize This Computer.
    Enter your Apple ID and password. Then, click the Authorize button.
    Connect your device your computer. If it is synced with another iTunes library, you may be asked if you want to "Erase and Sync" or "Transfer Purchases."
    If that alert appears, click Transfer Purchases.
    Important: Clicking Erase and Sync will delete any existing content currently on your device. The content would then be replaced with the content that is on the computer.
    If you were not offered the option to transfer purchases:
    After connecting your device to the computer, its icon appears in iTunes. Click the icon.
    From the File > Devices menu, choose "Transfer Purchases from 'Your device name.'"
    Note that the computer must be authorized for the Apple ID under which the purchases were made.
    You may also want to download the music directly from the iTunes store, rather than using the iPhone. See this article -
    Download past purchases
    http://support.apple.com/kb/HT2519
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Firefox will not start after an update, I cannot log in to Firefox in any manner.

    Firefox does not work any more and every time I attempt to access it (even in Safe Mode) it displays the following message:
    Firefox.exe- Entry Point Not Found
    The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll.
    I have absolutely no way of getting into Firefox to undo whatever has gone wrong, is it still possible to solve this without having to completely purge and reinstall Firefox?
    == This happened ==
    Every time Firefox opened
    == I clicked on something else during the installation of an update and Firefox has failed to start ever since ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Thanks kenton. But now pop-up says beta 5.
    The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
    The machines are identical IBM T60s with Windows XP.
    This is a real mystery, as well as being annoying.
    A clue or suggestion any one?

  • ITunes will not start after software update yesterday

    Using recent version of iTunes to manage my iPod Touch on a ThinkPad T400 with Win7 Pro 64-bit.
    I was offered a software update last night, and took it.  It appeared to install OK and required a reboot, which I performed.
    Now I cannot run iTunes at all.  In the Processes view of Task Manager, the iTunes process appears and then disappears without any kind of UI error message.
    I heve rebooted again.  I have downloaded the 10.4 installer from http://www.apple.com/uk/itunes/download/ and used the repair option.
    No good.  Rebooted.  No good.  The file version from Properties of iTunes64Setup.exe is 10.4.0.80 by the way.
    Stopped the Bonjour service.  No good.
    So now I cannot get my latest podcasts onto my iPod and I am extremely unhappy.
    Any ideas please?

    If you downgrade, uninstall Apple compatibility support also from Programs as that seems to be the crux of many issues, both with iTunes but also Safari.
    The other "crux" is that QT 7.7 and Safari 5.1 are security patches/updates deemed "critical/essential" category. Safari you can probably do w/o. iTunes is "dot zero" (10.4.0).
    iTunes: I am always doing this that bring UAC to blank the screen, and refuse to disable that security feature, but that also means iTunes video (music, movies etc) will also go blank.
    Other feature I have had with itunes is that it will go into a process thread lock wait state between video/movie and require a kill thread.
    In 5 yrs Vista/7 I've had more issues with Apple software than anything else bare none.
    Trouble installing Apple iTunes or QT Windows
    Removing Apple software components Windows
    iTunes Windows Troubleshooting security software issues
    Removing Apple Software Windows XP

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • SLD will not start after I upgraded Netweaver 2004s Portal

    SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
    It gives me the following J2EE error:
    Application error occurred during request processing.
      Details:   java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
    Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

    Hi ,
    as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
    See the threads below for more information
    NetWeaver 2004s upgradation problems
    Could not run WebDynpro Tutorial - NoClassDefFoundError
    Points are welcome if it is useful
    Koti Reddy

  • Error Code 150:30 Photoshop Will Not Open after System Software crash

    Error Code 150:30 Photoshop Will Not Open after System Software crash

    if mac os,Error "Licensing has stopped working" | Mac OS

  • Aperture crashed and will not open after last update.  Anyone else have this problem?

    Aperture crashed and will not open after last update.  Anyone else have this problem?

    Yes.  See this very forum for 50 threads on it, that explain the solution.

  • TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

    Just rented a movie in French on my iMac... movie will not start after download ?
    What I do now ?

    Okay. I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • FP Install Will Not Start after DLM Install

    The FP installation will not start after an apparent DLM installation.  The DLM appears to install and the control panel shows it is present, but the FP installation will not start.  There are no other messages that appear.  A restart and reinstallation attempt installs the DLM again, but still no FP install.  Using XP SP3 and IE 8.0.
    Thx

    Hi mont1228,
    The Adobe Download Manager (DLM) executes the Flash installer in "silent mode" so you shouldn't see a dialog box.  To confirm that Flash was installed successfully, go to http://www.adobe.com/software/flash/about/ and let me know if the animation doesn't appear.
    Best regards,
    Chris
    clechner//adobe

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for