Nav Attributes not seen during creation of RKF in Query Designer
Hi
SCENARIO
I have a Char InfoObject POSTFI[POSTFI is Navigational Attr] with 3 Navigational Attributes included in the InfoCubes.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
NOTE: All the above mentioned Nav Attr are properly set as Nav Attr and Active, Check and Rechecked.
We have 2-InfoCubes Current and Historical[both have same Structure].
A MultiProvider is build using the above 2-InfoCubes and the Char InfoObject PostFi is included in the MultiProvider.
Now I am trying to Create a Report using Query Designer and in that I have to Create a RKF[GrossSales1] and
the Condition for which is KeyFigure=FINAMT, where POSTFI_ZFITMCD01 = 5010, POSTFI_ZPCNR1= Y
PROBLEM
I can see the Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the main Screen of the Query Designer's LeftHandSide Pane containing KeyFigures and Dimenions under Dimension Financial=> PostFi=> Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1.
While creating the RKF on KeyFigure FINAMT I am just able to see the InfoObject POSTFI[in its resp Dimension] in the
Display RKF GrossSales1 Screen in the Left Hand Side Pane where we see the KeyFigures and Dimensions.
But I am NOT able to see the Nav Attr's ZINREPIND, ZFITMCD01, ZPCNR1 anywhere in the LHS Pane of the Display RKF GrossSales1 Screen.
Now I cant Create the RKF bcoz I cant see the 3NavAttr's of Char InfoObject PostFi it the LHS Pane and the 2-Nav Attr required for creating the RKF.
Can anyone PLEASE let me know How can I see/bring these Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the LHS Pane of the RKF Creation Screen to add them to make my RKF ?
Thanx in Advance
Hi
As per your explanation, below are the details
POSTFIPOSTFI --- This is navigational attribute which has below 3 objects as navigation attrs.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
first one, could you please confirm whether POSTFIPOSTFI is main info object or it is attribute of another info object.
If it is attribute of another info object, then the last attibutes(3) are called Transitive attribute(attributes attribute).
Reporting on Transitive attributes is only possible with the creation Info Sets.
If my guess is correct, then create Info Set based two info cube now create the query.
Hope it will work
Regards,
Venkatesh.
Similar Messages
-
Query not showing detailed result when run through query Designer or Portal
Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PMHi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik -
MARA-GEWEI is not overtaken during creation of material from cdesk
Hi, we work in ENV SAP R3 4.71 and create material in background out from
cdesk.
Therefore we defined in the customizing of CAD Desktop that in case of
creation of material MARA-GEWEI determination type = constant and
determination parameter is "ST" for "piece"
Every other parameter works fine during creation of material ==> as soon as
we fill a weight into the corresponding fields SAP tells us a message
"ENTER the unit of weight for the net weight" ==> if you press "continue action then" SAP ends creation of material an nothing happens....
ANY ideas?
(will enter this message for sure as well into the oss....)Hi Gerhard,
have u put
EXP_MARA-BRGEW Gross weight
EXP_MARA-NTGEW Net weight
from Inv side in config...
Also check in cdesk_cus under create material
<b>Base Unit of Measure Constant ST
Net Weight File Attribute Physical_Properties_MassValue</b>
hope this helps -
TouchPad and moto s9 hd Bluetooth not seen during search
This moto s9 hd is not seen with touchpad Bluetooth search but works fine with other phones.
any ideas?
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.never mind it started working. Full screen video of CNN is stunning, btw!
-
Creating RKF in Query Designer using Nav Attr of a Nav Char InfoObject
Hi
SCENARIO
I have a Char InfoObject POSTFI[POSTFI is Navigational Attr] with 3 Navigational Attributes included in the InfoCubes.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
NOTE: All the above mentioned Nav Attr are properly set as Nav Attr and Active, Check and Rechecked.
We have 2-InfoCubes Current and Historical[both have same Structure].
A MultiProvider is build using the above 2-InfoCubes and the Char InfoObject PostFi is included in the MultiProvider.
Now I am trying to Create a Report using Query Designer and in that I have to Create a RKF[GrossSales1] and
the Condition for which is KeyFigure=FINAMT, where POSTFI_ZFITMCD01 = 5010, POSTFI_ZPCNR1= Y
PROBLEM
I can see the Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the main Screen of the Query Designer's LeftHandSide Pane containing KeyFigures and Dimenions under Dimension Financial=> PostFi=> Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1.
While creating the RKF on KeyFigure FINAMT I am just able to see the InfoObject POSTFI[in its resp Dimension] in the
Display RKF GrossSales1 Screen in the Left Hand Side Pane where we see the KeyFigures and Dimensions.
But I am NOT able to see the Nav Attr's ZINREPIND, ZFITMCD01, ZPCNR1 anywhere in the LHS Pane of the Display RKF GrossSales1 Screen.
Now I cant Create the RKF bcoz I cant see the 3NavAttr's of Char InfoObject PostFi it the LHS Pane and the 2-Nav Attr required for creating the RKF.
Can anyone PLEASE let me know How can I see/bring these Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the LHS Pane of the RKF Creation Screen to add them to make my RKF ?
Thanx in AdvanceHi
As per your explanation, below are the details
POSTFIPOSTFI --- This is navigational attribute which has below 3 objects as navigation attrs.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
first one, could you please confirm whether POSTFIPOSTFI is main info object or it is attribute of another info object.
If it is attribute of another info object, then the last attibutes(3) are called Transitive attribute(attributes attribute).
Reporting on Transitive attributes is only possible with the creation Info Sets.
If my guess is correct, then create Info Set based two info cube now create the query.
Hope it will work
Regards,
Venkatesh. -
Combining Nav attributes to display them 'as one' in a query, based on muli
Hi experts,
I have a question regarding a possibility to display two navigation attributes 'as one' in a query.
In a cube I have the
info object ZMBETR_ID
and navigation attributes ZMBETR_ID __ZMBETR_NA (last name)
and ZMBETR_ID__ZMBETR_VN (first name).
In a query, based on a multi provider, the customer would like to have these two attributes in one field, like
last name, firstname ---
Is this possible? if yes, pease let me know, how.
Thanks in advance for your help.
Cheers
RuedigerHi Ruediger,
Here's what I would do.
1. Create an IO - ZMBETR_NM
2. Add this IO into ZMBETR_ID as a nav attr.
3. Within the update/transformation rule of ZMBETR_ID attribute load, write a routine to concatenate ZMBETR_ID __ZMBETR_NA and ZMBETR_ID__ZMBETR_VN.
4. Execute the master data load for ZMBETR_ID, then activate master data.
5. Go to the relevant ODS/CUBE then make the nav ZMBETR_NM available.
6. Then in the query, add the new nav attr ZMBETR_NM.
Hope this helps.
Assign points please.
Thanks.
Darwin -
Am not able to find 0SCM infoarea in query designer
I have installed business content infoarea Supply Chain Management 0SCM
cube Purchasing Data 0PUR_C01, and can see in infoprovider
I am not able to find 0SCM in query designer
Regards,
VivekDid u install any standard queries for 0PUR_C01?
If u have any existing queries on 0PUR_C01, then only u can see infoarea when u say 'OPEN' in QD..
otherwise u have to start with 'Create New', then navigate infoarea in QD -
Profit Segment not activated during creation of purchase order item
Hello,
While I create a Purchase Order Item, in the account assignment tab, I may fill in at least a cost center or a cost center and an internal order.
If I fill in only a cost center and key the enter buton, the profit segment is activated.
If I fill in the cost center and the Internal Order at the same time and afterwards I key the enter button, the profit segment is not activated. I have to click on the Profit segment button and validate the profit segment manually.
Could you tell me what the problem is?
Thank you in advance
RegardsHi
That makes sense to me
In any entry you can enter One REAL Object and more than one Stat Object...
SInce you entered Cost Center in Option 1 - You were proposed with PSG and IO as the option
Since you entered Cost center *** REAL IO in Option 2 - The system got what it wanted i.e. One REAL OBJECT.. hence, no more objects are proposed to you... However, you can manually enter PSG or WBS if allowed in your Field Status Group in FI
br, Ajay M -
Grant TRANSPORT does not exist during creation of Shopping Cart(Error Msg)
Hi,
When i create a SC in SRM 7.0 system, it gives following errors once i check the document.
(01) Grant TRANSPORT does not exist
(02) Master record for commitment item /TRANSPORTTRANSPORT does not exist
In the backend ECC G/L Account we have a Commitment Item "Transport" in Create/bank/interest tab attached to the G/L.
SRM side: In Account assignment tab of SC, i choose a same G/L which is being mapped to Prod Cat.
But no where the Grant is active. Is there any option for defining a Commitment item on SRM side. I feel the error is coming on SRM side when i try to create an SC!
Best Regards,
Aj!Hi there,
See response from developer on this.
SRM SE11 structure BBPCOBL1_470 last field sequence is not in synch
ERP SRM
BBP_COBL_47A BBPCOBL1_470
ACC_NO ACC_NO
.INCLUDE BUDGET_PERIOD
GRANT_NBR .INCLUDE
CMMT_ITEM_LONG GRANT_NBR
.INCLUDE CMMT_ITEM_LONG
BUDGET_PERIOD .INCLUDE
DUMMY_EEW_PD_ACC_CHK
Please adopt SRM structure BBPCOBL1_470 so that new field BUDGET_PERIOD
is placed right after last .INCLUDE.
Hope this helps,
Kind Regards,
Matthew -
Attribute not visible in Query Designer
hi BI Gurus,
I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the cube in which the main char is used looks fine.
I have checked all the options in RSECADMIN, everything looks good.
pls help me in finding the solution..
thanks
Cnu..check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
check out with the infocube whether u r checked the check boxes in navigational attribute tab.
regards
harikrishna.N -
How to restrict the attribute values for the user in query designer
Hi All,
I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
The requirment is we have planing material which is attribute of material
When X user want to restrict the values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
Or
is there way to blank the restriction help.so that he can't able to see values while restricting
Please some one can advise me on it..Hi,
Let me sum up:
you have an object ZPLNMAT for the planning material
you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
PY -
IP - Aggregation Level not showing in Query Designer as infoprovider
Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya KulkarniHi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni -
BBP_PO_SEND_XML - Not triggered during the creation of PO
Hi All,
We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
Thanks,
Phani.Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.
-
Date nav attribute on filter not working on version 7
Hi All,
We have done an update 3.5 to 7.0. We have a query which is filtered on a date filed which is a nav attribute from delivery. In 3.5 this works fine, but in 7 it is not working.
Any ideas on what I can check?
Thanks.
NickHi,
you can do that in copying the query using transaction code RSZC and saving it to an new name
1. Copy your first info-provider into new info-provider
2. Then copy structures or queries from first info-provider into new info-provider with RSZC
3. Modify new info-provider so way that it should have identical structure with your second info-provider
4. Then copy structures or queries from new info-provider into second info-provider with RSZC
5. Delete new info-provider
So you have two different info-providers with identical queries.
try this , it will work.(try in BI 7 enviornment )
santosh -
Changes in nav bar are seen in iweb not on site
I had to change the name of the home folder (apparently vertical lines are not allowed). I changed it to "Home" and the changes took effect in iweb. The changes are not occurring on the live web page. The original HOme page folder name remains. The links from two other pages back to it do not work. WHY in the world will the nav info not update?????? I republished the site to a folder (many times to keep trying to make it work) and re-uploaded files to internet (many times). This is extremely frustrating. I've already spent hours finding a work-around to another problem with this program (regarding splitting up multiple sites since iWeb won't let you publish them). Does anything in iWeb actually work?
Thanks for your help.trishaduck wrote:
I had to change the name of the home folder (apparently vertical lines are not allowed). I changed it to "Home" and the changes took effect in iweb. The changes are not occurring on the live web page. The original HOme page folder name remains. The links from two other pages back to it do not work. WHY in the world will the nav info not update?????? I republished the site to a folder (many times to keep trying to make it work)
If it's not looking right in the local folder, it will likely not look good when you update it at your website.
and re-uploaded files to internet (many times). This is extremely frustrating. I've already spent hours finding a work-around to another problem with this program (regarding splitting up multiple sites since iWeb won't let you publish them). Does anything in iWeb actually work?
Thanks for your help.
Best would be to post the url to your website so we can take a look.
Phil
Maybe you are looking for
-
Error of Excise Invoice in Consignment Issue billing document
The usual process of billing from excisable unit (with CIN) is as follows: 1. VA01 >2. VL01N(PGI)> 3. VF01 (Proforma Inv) --> 4. J1IIN (Excise Inv) --> 5. VF01 (Comm Inv) While in non-Excisable unit the 3 & 4 steps are not required. In Consignment F
-
Environment variables from ~/.MacOSX/environment.plist not read?
Hello, I repost this from "Mac OS X 10.5 Leopard > Account and Login" since it was advised to me overthere. Sorry if your already read this one before. I have a problem defining environment variables that should be visible to all my user processes, n
-
Wifi not working after upgrading to mountain lion
As soon as I updated my MacBook Pro from Snow Leapord to Mountain Lion. My wifi doesn't turn ON. It says WIFI "No hardware found".
-
Does Tiger store sensitive data in its files like OS 9 did?
OS 7-9 and perhaps earlier stored sensitive data in files. For example once I copied a file to a floppy disk, and sometime later popped this disk in a PC. For some reason the file became corrupted and when I opened the file on the PC I was able to se
-
Deferred tax in v9.0 PL11
Hi, I was reading through SAP Note 1994207 - Deferred Tax Enabling and tried to follow the steps to enable deferred tax in my PL11 db. I couldn't locate the 'Deferred Tax' check box describe in the note? What else do i need to consider to enable th