Nav bar sub menu and Slideshow not displaying in preview?

Hi,
My website, markmillerdesign.com hosted by godaddy is not displaying the sub menu or the images to the slide show.
I had to relink all of my assets because my computer was restored, but they all work until i preview in a browser or upload site.
My Nav menu is set to show all pages but the sub menu is still not working or coming up?
I have even made new slideshows and reinstalled images but they still do not come up in preview mode or on the web.
Is there a way I can diag this? Any ideas?
Please help!
Thanks.

I am now getting this same error on all of my websites. some of them I havent uploaded to or even updated for quite a while, is this a muse issue since the last update?
Please help !

Similar Messages

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

Sub total icon is not displaying in alv report output

Hi friends ,
In alv report display on menu bar the icon : subtotals is not displaying at the output , I should not give subtotal in each field catalog .
Plz give me solution, points will be rewarded.
with regards,
prasad.

Hi,
I think u r using PF-STATUS parameter in function module,
if u use this parameter, you sholud give the icon name etc..
otherwise by default it will appear.
Check your code again.
Give me exact requirement, if possible paste the code.
Regards,
Chandu

"Quality and Media" not displaying in Print dialog.

I am using Mac OS X 10.6 Snow Leopard on a Macbook Pro with a Canon MB5220 Multifunction printer over WiFi. I have installed the Canon Drivers and can print to the printer but the "Quality and Media" menu choice does not display in the print dialog so I can't set any of the quality settings or the color settings for the printer.
I installed and re-installed the drivers. Tried with several applications such as TextEdit and preview. Only menu choices are Layout, Color Matching, Paper Handling, Cover Page, Scheduler.
Is there anything that would keep Quality and Media from dispaying?

It's not just the Quality & Media menu that appears to be missing. There are three other Canon menus you should see like below;
These menu items are supported by the plugins bundle installed in /Library/Printers/Canon/BJPrinter/PDEs, which supports a number of Canon inkjet printers. Since reinstalling the driver for the MG5220 has not helped then I would try a reset of the printing system and then adding the printer again. To reset the printing system, open Print & Fax, move the mouse over the Printers list and Control-click. The reset popup will appear. Select it and authenticate if prompted and then restart the Mac. Please note that this action will remove all printer and scanner queues from Print & Fax, but not the associated drivers so just the queues will need to be added again.
If this action does not resolve the problem then try running the Canon Driver Update v2.6.

JNLP related-content issue in JRE 7u5 Sub Menu Item link not working

we are having an issue with our existing Web Start Application in Java Version 7 Update 2 and above where the Sub Menu items are not being associated with Internet Explorer with href link as Target when using <related-content> tag in JNLP. This is working fine in JRE 1.6, JRE 1.7.0 and 1.7.1. I have tried using Integration Service to programatically create these shortcuts in JRE 1.7.5 but was unsuccessful.
<jnlp spec="6.0+" codebase="http://..." href="xyz.jnlp">
<information>
<title>ABC</title>
<vendor>ABC Vendor</vendor>
<homepage href=""/>
<description>ABC Desc</description>
<description kind="short">ABC Desc Short</description>
<icon href="abc.gif" kind="default"/>
<offline-allowed/>
<shortcut online="true" install="true">
<desktop/>
<menu submenu="ABC"/>
</shortcut>
<related-content href="help.doc">
<title>ABC Help</title>
<icon href="help.gif"/>
</related-content>
<related-content href="Uninstall.html">
<title>Uninstall Page</title>
<icon href="uninstall.gif"/>
</related-content>
</information>
<security>
<all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
<java initial-heap-size="128m" max-heap-size="256m" version="1.6+"/>
<jar href="ABC.jar" download="eager" main="true"/>
</resources>
<application-desc main-class="com.main.Abc"/>
</jnlp>
Any help in this regard would be greatly appreciated.

I haven't filed this as a bug in Java development yet but am going to do so soon, In the mean time i was hoping to see if anyone else is on the same boat as me and if there was a work around.

ESS benefits and payment not displaying after support pack update

Hi All,
After the latest HR support pack update ESS benefits and payment not displaying
SAP ECC 604 EPH5
SAP_ABA 702
SAP Kernel : 720_EXT_REL
Kernel Patch number : 439
Netweaver portal version - 7.30
please help
Regards
Rahul

Hi Siddharth & Jwala,
the issue got fixed, by changing the order of Payment above the Benefits
1. i made some options to be disabled & enabled in both benefits and payment
2. Then in the portal i could see the benefits and payment
3. inside the benefits & payment i was able to see two option 1 is for benefits & other is for payment
4. we only wanted payment functionality to be displaying
5. so i tried to hide the benefits then noting was getting displayed in the portal
6. finally i changed the order of the payment just above the benefits
then then i was able to see the benefits and payment inside that i was able to see the payment where i was able to see the payslip
i am not sure what i have done but i is working but please let me know what the problem was actually
Regards
Rahul

Webhelp TOC and Contents not displayed in Google Chrome

Hello All,
I recently tried to view webhelp (generated using Robohelp 7.0) in Google chrome. But chrome displays only the first topic of the web help and does not display the TOC of the help. Can any one please help me in why this is happening.
PS: I am viewing the online help from a server and not from local folder. When viewed from within local folder it doesn't display any info.
Rithesh

Hi,
See snippet 103 and snippet 130 on Peter's site: http://www.grainge.org/pages/snippets/snippets.htm
Greet,
Willam

Mac osx 10.5 will not open download - has a 'no entry' bar over icon and message 'not supported on this architecture', also has overwritten previous version.

As above. Did not notice the 'no entry' sign and dragged icon in applications as per your instructions and it replaced the previous version. Now have no Firefox at all. Tried 3 downloads, all no good.

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix. Help please?

There are a couple of ways to remove these items from the drive.
One is with the $15 shareware app, BlueHarvest. It will remove the AppleDouble files from the drives you want the ._ files removed from, and has an option to prevent them from being written to non Apple formatted drives in the first place.
But the free and pretty easy way to do it is to use Terminal. From what I can see in the manual for your projector, you can only get images to it on either an SD card or a USB flash drive. So I'm going to assume a USB drive for the following.
Plug in your MS-DOS formatted drive so it appears on the Mac desktop. Open Terminal and enter:
dot_clean -m
Enter a space after the -m . Then drag and drop the icon of your flash drive into the Terminal window. It will fill in the path of the drive. Press Enter. All ._ files will be removed from that volume.
Actually, I think it removes all files that start with a period. None of which are of any great importance on a DOS formatted drive. Such as the hidden trash for that drive. The next time you plug the drive in, OS X will simply recreate it.

TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

HT2500 How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it.

How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it. New macbook pro with LION OS

Just drag the divider line between the preview pane and the message list all the way to the edge so the preview is completely closed. Selected messages will open in a new window with a double-click or the return key.

Raw files not displayed in preview

In Elements 10, are raw files STILL not displayed in preview in Windows 7?

Thanks for your reply, Ken, but when I do the Get photos-From Files and folders thing Elements did the same thing it does for jpeg files but then I still can't see the raws. HOWEVER, this morning after reading your message I went back to Elements to get that message that Elements gave me after trying to get the raw files, so that I could quote it to you, and there were all the raw files that I had gotten and tried to view yesterday. So dawn breaks on Marblehead and I realize that maybe Elements has to be refreshed in order to see the raw files. Thanks Ken!
John Holstein Mobile phone: 82-10-4727-0264
Chongno-gu Myeongryun 1-gil 13, Apt. 401
Seoul 110-811
South Korea

Menu bar icons vanished and iPod not showing up in iTunes anymore

All menu bar icons on the right side (keyboard, clock, battery) vanished.
It's not possible to get them back by mark their visability in the system configuration. The system just ignores any attempt to do that (I can mark the check box, but nothing appears on the menu bar; after leaving and returning to the panel, the mark has gone).
Besides of that, my iPod doesn't show up in iTunes anymore (but does on the desktop).
My laptop may be physically damaged as it fell down to the floor a few days ago.
Can anybody help?

Welcome To Discussions Daniel Lerch!
Create a new Admin user account, and see if the same problem occurs while logged in to that account.
Have you run the Apple Hardware Test and also Repair Disk?
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger, on the Menubar at the top of the screen.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, then re-run Repair Disk until no errors are reported.
7.When finished, select Quit Disk Utility from the Installer menu.
8.Select Quit Installer from the Installer menu.
9.In the resulting pop-up window, choose restart.
10.After the computer has restarted, you can eject the CD.
Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number.
Make note of the S.M.A.R.T. status.
ali b

Spry image slideshow not displaying as expected

Hoping someone in this forum can help, as I have previously posted this problem in the Spry forum, but I only got one answer and it didn't seem to fix the problem.
I used the widget browser to place a copy of the 'spry image slideshow with filmstrip' widget on to one of my web pages. When this page displays, there is a big gap (like excess padding) above the main image (between the outer frame and the main image frame). I can't see why this is happening or what bit of HTML/CSS to tweak to sort it out.
I have uploaded my test page to the server and you can see it here:
http://www.hebrideansheep.org.uk/test_gallery.html
any and all help gratefully received.
John

The problem lies with stylesheet.css. If you delete that, you will see that the slideshow will display as expected.
When doing a layout for the page, just look at the basics. In your case you have got a header, a sidebar, main content and a footer, all within a width of 960px and centered within the viewport. The basic CSS for the layout would look like
/* CSS Document */
html {
    margin: 0px;
    color: #666;
    font-size: 12px;
    font-family: Arial;
    background: #666 url(images/page_bkgd.jpg) repeat-x;
body {
    width: 960px;
    margin: auto;
    background: #FFF url(images/content_bkgd_tile.jpg) repeat-y;
#header {
    height: 180px;
    background: #4971a2 url(images/banner_bkgd.jpg) no-repeat;
#aside {
    width: 20%;
    float: left;
    /*----for this example only*/
    background: #cfcfcf;
    min-height: 400px;
    /*----end for this example only*/
#article {
    width: 80%;
    float: left;
    min-height: 400px; /*for this example only*/
#footer {
    clear: both;
    height: 88px;
    background: #cfcfcf url(images/footer_bkgd.jpg) no-repeat;
The HTML will look like
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="untitled.css" rel="stylesheet">
</head>
<body>
<div id="header">
<h1>My Header</h1>
</div>
<div id="aside">
    My Menu Bar
</div>
<div id="article">
    this is where the slideshow goes
</div>
<div id="footer">
    my copyright etc
</div>
</body>
</html>
Gramps

Nav bar sub menu and Slideshow not displaying in preview?

Similar Messages

Maybe you are looking for