Nav N Go iGO 8

Since I've bought my iPhone 3G, I was looking for some decent application for turn by turn navigation. I was so happy when I heard that Nav N Go iGO 8 will soon be available also for iPhone. Now it looks that Apple rejected this application. I can not believe this decision. There is a tons of people whose desperately need some real, turn-by-turn navigation software, like Garmin, Nav N Go iGO 8 or something like that.
I didn't know how to contact Apple, so I wrote this here. If there is some other, more efficient way to tell this to people who are deciding on that, please tell me. If not, please consider this demand, and reconsider your decision to reject this application.
p.s. I am very satisfied with my iPhone 3G, but I used on Garmin navigation on my previous phone - nokia n82, and I also consider changing my iPhone if Apple doesn't allow soon any decent navigation software.

You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html
(Also, thanks for realizing that "we" are not Apple - this is a user-to-user forum.)

Similar Messages

Acer e700 acer nav how to set it as default naviation app

Hello, How do I set the acer nav app as the default navigation app on my e700? Now google maps is always used and I really do not like it. It always send me in weird routes and some how I am always driving a bit next to the roads. My phone is on kitkat 4.4 and rooted if that is any help.

I often use an app called "All Motorhome Parkings" on the play store. Here you can locate a location you can go with your motor home and touch "route". It gives me 4 opens. 1: navigation (grayed out) 2: Sygic (which I do not have) 3: maps 4: Other When choosing "other" instead of maps it still opens Maps for navigation. The same goes for an app called "markplaats" a sort of ebay for the netherlands. (I think ebay even owns it) You can locate where the product you want to buy is located and tap a route button. When I touch the route button I get a pop up asking me how to open it. Chrome or Maps are the only options. Now maybe Igo (which I also have) might be an "alien" app but the Acer Nav app is installed by default on the phone. Why can I not choose this one for my navigation app. Now I always have to go through a lot of trouble not to use google for navigation and launch the app manually and enter the address. This seems very very very old fashioned and feels like some sort of sabotage from google to force people to use maps instead of somethings else. But surely more people have this problem or I am just not seeing how to fix this.

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

Tipo de condição ICM2 - Tipo de condição NAVS

Caros, boa tarde!
Estou com um problema na configuração do cenário de Consignação. Acontece que a empresa utiliza uma contabilização diferente da comumente utilizada no processo standard. A configuração necessária precisa que o ICMS não seja contabilizado no pedido de compras, mas precisa fazer parte do calculo do PIS e do COFINS. Para resolver, configuramos no taxcode (K6) a condição ICM2 que não calculou o ICMS, porém serviu para a BC de PIS e COFINS.
O problema é que quando utilizamos a condição ICM2 o sistema lança o valor do ICMS na condição NAVS (comportamento correto), visto que o valor do imposto não dedutível vai para o estoque (Chave NVV). O problema é que na criação da MIGO o valor é somado e nesse cenário (Consignação) o ICMS será calculado novamente como segue:
Valor do Pedido de Compras (bruto) = 1.000,00
Valor do ICMS = 180,00
Valor do PIS = 16,50
Valor do COFINS = 76,00
Repare na condição NAVS
O sistema busca o valor da condição ICM2 e lança nessa condição aumentado o valor para 907,50.
MIGO
Aqui o sistema usou o preço liquido 727,50 + o valor do ICMS não dedutível 180,00 + o ICMS 180,00 = 1.087,00.
Isso só acontece, porque o valor da condição ICM2 foi para a condição NAVS, logo foi para o estoque e recalculou, quando deveria lançar somente o ICMS numa linha separada.
BTW: Se usarmos uma condição como contrapartida, por exemplo IC10 o sistema muda a BC de PIS e COFINS e o ICMS não será calculado.
MIRO
Repare que na fatura o sistema lança o valor do ICMS numa linha separada, comportamento correto, pois existe uma perna na EM.
O problema é que o valor do ICMS não pode aparecer na EF e só aparece, porque o sistema precisa lançar em algum lugar e lançou nessa conta, mas no cenário da companhia a linha de ICMS não pode aparecer. Se perguntar onde o ICMS será lançado a resposta é: Na transitória
Simulamos a "possível" contabilização modificando o taxcode (K6) na hora de criar a MIGO e tivemos o resultado esperado, mas se voltarmos para o Pedido de compras o valor de 907, 50 estará na condição NAVS novamente.
Alguém já passou por isso ou teria alguma ideia de como podemos resolver esse problema?
Forte abraço
Rodrigo Pagani

Caros.
Para resolver esse problema criei um taxcode novo com o ICM2 e utiliei na MIRO.
Um abraço
Rodrigo

I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

i inherited the website. It’s for a non-profit and is not very
sophisticated, and neither am I in webdesign. It currently has multiple
pages that are identical except for that body section, so whenever i change
the navigation (in the sidebar) I have to update every html page. I want
to have one basic page, and just call in the different body content based
on the link the user selects from the nav bar. How can i do that using a
script? i am using Dreamweaver.
~ in love and light ~
Jeannie
On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

Nav.attr data is not coming in cube

Hi guys,
Nav.attr data is not coming in cube even though there is data in master data tables.

Hi Ajay,
In your case for the Nav Attr data to appear firstly load the master data where your Nav Attr resides and then do the apply hier/attr change for that master data.
Hope this helps.
Bye
Dinesh

When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.

When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.
It only seems to do this since an iphone download last year.......its driving me mad !

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
When associating a device with an Apple ID see the following regarding the 90 day limit.

FWs Nav Bar - Make Hyperlinks

Hi
I am currently making a website and I have created a nav bar
in fireworks using slices and pop-up menus etc. Anyway I have
imported it to my website in Dreamweaver, but I cant figure out how
to make a hyperlink from the from down and nav bar buttons to the
corresponding page. Do I make the links in Fireworks? If so, how?
In Dreamweaver also how?
Any help much appreciated, thanks.

It would be easiest to add the hyperlinks in Fireworks, which
you can do in the pop-up menu editor (same place you entered the
text for the buttons).
If you wanted to add the links in Dreamweaver you'd have to
do it in source-code view. Search for the text that you entered for
the button name, and Fireworks should have entered a pound/hash
symbol (#) for your link (don't quote me on that though). Replace
that with your page link and you should be good to go.
Someone should be along shortly to tell you that the
Fireworks menus suck though, so stand by for that.

Nav bar resizes table

Hi, I am trying to create a page that is 800 px wide with a
nav bar that is also 800 px wide but the nav bar seems to increase
by 21px when it is exported out of fireworks and then imported into
dreamweaver. This then forces the rest of the page out by 21px. I
have tried deleting the spacers fireworks creates and just resizing
the table itself but this does not help. I have coloured the
background of the header black to illustrate this. Please find my
problem at
http://www.cambridgestainedglass.co.uk/
. Thanks in advance

>>when it is exported out of fireworks and then
imported into dreamweaver
Sorry to say but that is likely the cause of all your
problems. Exporting
anything but single images (i.e. HTML) from Fireworks,
Photoshop, etc. is a
poor practice as those apps create very wonky HTML code. I
suggest you go
back to FW, export single images/slices only and then build
the nav bar in
DW.
But DO NOT use the built-in DW menus either. Either code your
own menus (nav
bar) or use an add-on like the P7 stuff.
Walt
"Stefan83" <[email protected]> wrote in
message
news:f87dqu$nps$[email protected]..
> Hi, I am trying to create a page that is 800 px wide
with a nav bar that
> is
> also 800 px wide but the nav bar seems to increase by
21px when it is
> exported
> out of fireworks and then imported into dreamweaver.
This then forces the
> rest
> of the page out by 21px. I have tried deleting the
spacers fireworks
> creates
> and just resizing the table itself but this does not
help. I have coloured
> the
> background of the header black to illustrate this.
Please find my problem
> at
>
http://www.cambridgestainedglass.co.uk/
. Thanks in advance
>

Maintaing focus on Nav elements

Does anyone know how to hold focus on a separate navigation
menu (i am using an unorderd list with hrefs, using CSS pseudo
styling with an additional Javascript to activate the focus on
which menu item page is displayed), while interacting with the Spry
collapsible panels? Anytime, I open or close a collpasible panel,
my navigation menu (separate from the spry panels) looses it's
pseudo 'active' state and becomes unhighlighted.

By Applying a page ID to a non-displayed DIV(wrapping the
entire page content before and after body) and an ID on each
navigation element, I can style the nav elements accordingly, to
appear as if selected, while still interacting with other elements,
including Spry elements, on the page.

How To Change Hyperlinks And Nav Menu Colors

I continue to see people stating that it's impossible to change hyperlink colors and navigation menu colors until after you publish your site. This is not true. It's quite easy to update your templates with the colors YOU want and when you update the template, you never have to mess with any post-processing. You make a new page? Your colors are already there.
I've gone over this before in this thread:
http://discussions.apple.com/thread.jspa?messageID=3288533&#3288533
But I'll go over the quick and dirty version here as well. Those who want more detail can post a question and I'll elaborate.
First, do you know how to get into iWeb's inner folders? You right click or control click on your iWeb icon and select Show Package Contents from the pop-up menu.
Step 2
Once you've done that, you'll see a new Finder window that shows a folder called Contents. Open that and then open the next folder Resources. Within Resources there's a folder named Shared. Open the Shared folder.
You're now looking at your collection of iWeb template files. You'll notice that each template has seven individual page files - each file defines the layout and styles for the page for which its named. This is actually one of the two places where you'll find the data/images that make up your iWeb pages. This location only contains the images. Now I'll show you were to find the data file.
So you're currently here:
/Applications/iWeb/Contents/Resources/Shared/
You want to go here:
/Applications/iWeb/Contents/Resources/English.lproj
Now if you speak another language and your Mac's system language is set to the language you speak, substitue English with that language. If your system is set to English regardless of the language you speak, and you use the English templates, then stick with the English folder.
When you're in the English.lproj folder, you will see seven sub-folders and one file named TemplatesInfo.plist. TemplatesInfo.plist is the file that registers the templates and tells iWeb what you've got in your collection. But we don't care about that file for now. We're after the template data files.
The seven sub-folders are aptly named for each of the seven page-types as you can see. Open the About Me folder.
Now you will see an "about me.webtemplate" file for every template you have in your collection. Good job. You've learned something new. Move on to Step 3.
Step 3
If you haven't decided yet, now's the time to decide which template you'd like to update. If you're just along for the ride to learn something new, no worries. We won't do anything you can't undo.
Pick a template file now. Perhaps you chose the White template, or:
White About Me.webtemplate
Right click or control click on this file and select Show Package Contents from the pop-up menu. This will launch a new Finder window that displays the contents of the White About Me.webtemplate file.
You will likely see a handful of different files, but the file you want is the one named Index.xml.gz.
Index.xml.gz is the brain behind the template. Within this file are all the settings for the page you chose and it's really not hard to find what you want and change it. So let's take a peek.
Step 4
Double-click the file Index.xml.gz. This will reveal a new file named Index.xml. You might have to scroll down in your Finder window to see it. Rename Index.xml.gz to Index.xml.gz.backup in case you screw things up, you have your original.
Now, open Index.xml with TextEdit. Do not open the file with a code editor unless you have already formatted the file.
When the file opens, you'll notice it's one gigantic jumbled mess of stuff. No worries, we'll straighten that out. All you need to do is a find/replace.
Find all instances of: ><
And replace with:
<
The line break is important so maybe just copy the lines right out of this post. When you replace all of those, the file will be far more easy to view.
Assuming you've completed that step. You're basically ready to make your change and test it out! Not hard ey?
So let's say you want to change your hyperlink color from grey to blue. Search for this string:
BLDefaultHyperlinkCharacterStyleIdentifier0
When you find that string, you will see a few lines below it, two lines that look similar to this:
<sf:fontColor>
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r=".8" sfa:g="1" sfa:b="0.4" sfa:a="1"/>
This is how the template specifies color. It's RGB100. Your Mac came with a program called Art Director's Took Kit and that application can tell you the RGB100 values for any color you want. Tinker with that and you'll have a lot of fun with this.
So I picked out a nice royal blue for you. The RGB100 values for it are:
R:0 G:25 B:100
What you need to do is update the color line to match those values:
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g=".25" sfa:b="1" sfa:a="1"/>
Notice that you specify these in terms of a percentage, where 25 became .25 and 100 became 1.
Step 5
Save your file. It's time to see your work in action. Open iWeb if it isn't open already and create a new page using the template you've just altered. If you altered the White About Me page, then select that and create the new page.
It there are hyperlinks already on this page, you should already see that they reflect your new color. If there aren't any hyperlinks, then type some text and create one. You should see your new link color right away!
Now if you don't see the new color, either you picked the wrong page or you neglected to rename the Index.xml.gz file a few steps back. If you did not rename that file, then it's still in control of your template. Rename it now and try again.
If you don't like that color, simply swap back to the TextEdit page and change it until you like it - switching back and forth between the file and iWeb to view your changes. Once you're happy, make note of the color you chose and make the change for the remaining six pages in the tempalte you selected. Just be sure to follow the steps for each page you edit. If you fail to see your change, again, check to see that you renamed Index.xml.gz.
Side Notes
For the more technical, rather than editing an existing template, you might want to duplicate and rename a template. This essentially creates a brand new one. If you're pretty good within Finder then go for it, just be sure that you duplicate the files in both locations:
/Applications/iWeb/Contents/Resources/Shared/
/Applications/iWeb/Contents/Resources/English.lproj/...
Choose a unique name for the duplicated template and change every single file so that the new name replaces the old one. You would have to register this new template in the TemplatesInfo.plist file as well, but I'm not going to get into that here.
The thread I referenced at the top has all kinds of search terms to find the other hyperlink styles (rollover and visited) and all the navigation menu styles plus a bunch of other fun stuff.
Now, it seems long, but that's because I wrote it well. The shortest version of this I've ever written was two sentences, but that was for a UNIX geek and he got it. It's just as easy for you, but I write it out so that anyone can do this, because anyone can. It's just not hard.
If you have questions about any of the steps, go ahead and ask.

Good. Okay here's how to apply a background color to your nav bar buttons. For example, my Aerolite template sets the selected page to a black background color. The rollover effect uses a gradient fill. I'll describe both of those here.
First, here are the navigation menu search terms:
navbaritem-style-normal-default
navbaritem-style-rollover-default
navbaritem-style-selected-default
navbar-pargraph
The first three set the button effects and text colors. The last one there sets the font, font size and other paragraph styles.
To change the selected page button background color, or gradient or image, first search for it using the search term above. Start from the top of the file because there are two instances of those terms, one where you can set the values, the other is only reference to the first and does not allow you to change settings.
When you find the search term, you might want to insert an empty line above it to help separate it from the rest of the code. You can also insert an empty line below the section. The end of this style ends with:
</sf:navbar-item-style>
Be careful not to mix that up with </sf:navbaritem-character-style>
Now, within this section, you'll find all kinds of settings... stroke, fill, character styles, etc. Notice you can change font color in there. But for this demo, you want to find the section that looks like this:
<sf:fill>
<sf:null/>
</sf:fill>
I'm assuming you're editing an Apple template that does not already have a fill effect. If it does have one, then your example might not look exactly like that.
To apply a color fill, change those three lines to these lines:
<sf:fill>
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g="0" sfa:b="0" sfa:a="1"/>
</sf:fill>
You can see that we've inserted the line that specifies color - something you should be familiar with by now. Here you can specify the color that will become the background of your nav bar button. This example specifies black. Easy no?
If you would prefer a gradient fill, then replace those three lines with this:
<sf:fill>
<sf:angle-gradient sfa:ID="SFRAngleGradient-1111" sf:opacity="1" sf:type="linear" sf:angle="0">
<sf:stops sfa:ID="NSMutableArray-1111">
<sf:gradient-stop sfa:ID="SFRGradientStop-1111" sf:fraction="0">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0.40" sfa:g="0.40" sfa:b="0.30" sfa:a="1"/>
</sf:gradient-stop>
<sf:gradient-stop sfa:ID="SFRGradientStop-2222" sf:fraction="1">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0.64" sfa:g="0.66" sfa:b="0.54" sfa:a="1"/>
</sf:gradient-stop>
</sf:stops>
</sf:angle-gradient>
</sf:fill>
Now, don't panic Here's what this is. The first line allows you to specify the angle of your gradient. Play with the numbers from 0 to 359 until you have what makes sense for your design.
Then, you will see two familiar lines again - the lines that allow you to specify color! The first line is the first color of your gradient and the second color is the second color of your gradient. That's all there is to it!
SECRET: It might be possible to add additional colors, not just two. Do you see the part sf:fraction="0" and sf:fraction="1"? These are gradient stops. I'm willing to bet that if you inserted a thrid gradient stop with a fraction setting of .5, you'd have a three-color gradient!
<sf:gradient-stop sfa:ID="SFRGradientStop-3333" sf:fraction=".5">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g="0.25" sfa:b="4" sfa:a="1"/>
</sf:gradient-stop>
I have never tried this - it just occurred to me as I was looking at this code. Big prize for the first person to prove the theory
NOTE: You will notice that the number 1111 and 2222 are within this code. iWeb XML relies on identification tags here and there. It's nothing you really have to care about except if you insert gradient fills in more than one area. Those numbers need to be unique so if you paste that code in for your selected page button and then paste it again for your rollover buttons, you'll need to update the numbers for the second button. Any numbers are fine. Use 3333 and 4444 for the second set, 5555 and 6666 for the thrid and so on. I often just type 4345781476 - doesn't matter.
Next lesson will be images.

Report Issue - Nav Attribute

Hi All,
 Here is my issue...
I've a sales report against Multi Provider to display a filed 'Province Ship To', it is a Nav attribute of 'Customer Ship To'. I've verified in mastre data of 'Province Ship To' that there are values for both text (Medium & Short) & Key and also verified values exits in MP through LISTCUBE. But when I run a query I'm getting 'Not Assigned" value for 'Province Ship To' and I need to see full description it.
I'd appreciate if some one could help me on this as this is urgent...
Thanks
BI Consultant

Thats what I did, display as both TEXT & KEY. For KEY it is showing up, for example OR in KEY but not showing up the description for TEXT/Name column, isntead it is showing as "Not Assigned" for all records.
I've verified Short & Med description extits for all records in Masterdata.
Example:
Key Txt/Name Desc.
OR Oregon
CA California
CT Connecticut
Thanks

Did latest iPhone update and now non of my third party apps work. They open then close immediately. I tried to restore but can't as my iphone wont sync with itunes now and I will loose my apps. Also my largest app "Sat Nav" has gone. Help ??

Hi All
I have run into problems with my iPhone 4. I hadn't done an update for a while so decided to get my itunes and iphone 4 up to date. I downloaded all the latest versions. However now non of my third party apps work and my largest one has vanished. I try and open them and they flash up and then close again. I thought the easiest thing to do was to restore so I tried to syn my apps onto itunes so I wouldn't loose them. However it won't let me sync the apps onto iTunes. It ill allow me to syn the old version when I just started but since then I have bought a dozen other apps. Can anyone help. thanks

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

Created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, it comes up on each page as a small black dot. How do I get the nav bar to load up and show?

I created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, where the nav bar should be is only a small black dot on each page. How do I get the nav bar to load up and show? It was a disaster loading up my site as it changed the case of the letters and at first no pages were seen, so I had to go through and change the letters that were supposed to be cap, back to cap in every file. I don't know if this has something to do with it or not. The tech support doesn't have an answer. Please let me know if you have any ideas and solutions. Thanks bunches!

Here are links to the simple 7 pages....
http://www.rednosedesign.net/home.html
http://www.rednosedesign.net/about_us.html
http://www.rednosedesign.net/logos.html
http://www.rednosedesign.net/flyers_&_ads.html
http://www.rednosedesign.net/notecards.html
http://www.rednosedesign.net/business_cards.html
http://www.rednosedesign.net/contact_us.html

How to load a Nav page into other pages?

Hi, I am using CSS and HTML. I am not using a template. Not
an expert.
I want to have just one page with all main navigation links.
Parent link/list and subordinate links/list as drop down. No page
templates.
How can I get pages 1 to 10 to load a 2nd page that possesses
all the nav links? Would load into an <iframe> but first I do
not want to use that. Second I do not know how to z-index it so the
drop down links are on top of any page 1-10 info that is in the
way?
The Parent Nav link/list is horizontal and only needs to show
main parent row. Subordinates will drop down. Do not want to have
to have 1 row showing for all possible drop down rows. Ex.
Header
<div>Parent link/list with drop downs that z-index to
on top
<div>other things
currently I get loose all drop downs to <div>other
things.
How can I accomplish this?

[nav.php]

<div id="navigation">
<ul class="nav">
<li> <a href="
http://www.timlist.net/"
target="_parent">Home</a> </li>
<li><a href="
http://timlist.net/arianna.html"
target="_parent">Arianna</a>
<ul>
<li><a href="
http://timlist.net/arianna/art.html"
target="_parent">Art</a></li>
<li><a href="
http://timlist.net/blog.html"
target="_parent">Blog</a></li>
<li><a href="
http://www.charitynavigator.org/"
target="_parent">Charity Navigator</a></li>
<li><a href="
http://timlist.net/not_ready.html"
target="_parent">Gallery</a></li>
<li><a href="
http://timlist.net/not_ready.html"
target="_parent">The Word</a></li>
<li><a href="
http://timlist.net/not_ready.html"
target="_parent">Safety</a></li>
<li><a href="
http://timlist.net/memorial.html"
target="_parent">Memorial</a> </li>
</ul>
</li>
<li><a href="
http://timlist.net/boating.html"
target="_parent">Boating</a>
<ul>
<li><a href="
http://timlist.net/boating/brands.html"
target="_parent">Boat Brands</a></li>
<li><a href="
http://timlist.net/boating/types.html"
target="_parent">Boat Types</a></li>
<li><a href="
http://timlist.net/boating/sales.html"
target="_parent">Buy & Sell</a></li>
<li><a href="
http://timlist.net/boating/drives_fuels.html"
target="_parent">Drives &
Fuels</a></li>
<li><a href="
http://timlist.net/boating/education.html"
target="_parent">Education</a></li>
<li><a href="
http://timlist.net/boating/fishing.html"
target="_parent">Fishing</a></li>
<li><a href="
http://timlist.net/boating/misc.html"
target="_parent">Miscellaneous</a></li>
<li><a href="
http://timlist.net/boating/terms.html"
target="_parent">Terminology</a></li>
<li><a href="
http://timlist.net/boating/stores.html"
target="_parent">Stores</a></li>
</ul>
</li>
<li><a href="
http://timlist.net/camping.html"
target="_parent">Camping</a>
<ul>
<li><a href="
http://timlist.net/camping/camping_buy_sell.html"
target="_parent">Buy/Sell</a></li>
<li><a href="
http://timlist.net/camping/camping_clubs_forums.html"
target="_parent">Clubs</a></li>
<li><a href="
http://timlist.net/camping/camping_games_cooking.html"
target="_parent">Cooking</a></li>
<li><a href="
http://timlist.net/camping/camping_clubs_forums.html"
target="_parent">Forums</a></li>
<li><a href="
http://timlist.net/camping/camping_games_cooking.html"
target="_parent">Games</a></li>
<li><a href="
http://timlist.net/camping/camping_gear.html"
target="_parent">Gear</a></li>
<li><a href="
http://timlist.net/camping/camping_grounds_guides_mags.html"
target="_parent">Grounds</a></li>
<li><a href="
http://timlist.net/camping/camping_grounds_guides_mags.html"
target="_parent">Guides</a></li>
<li><a href="
http://timlist.net/camping/camping_hardware.html"
target="_parent">Hardware</a></li>
<li><a href="
http://timlist.net/camping/camping_grounds_guides_magazines.html"
target="_parent">Magazines & News</a></li>
<li><a href="
http://timlist.net/camping/camping_misc_safety.html"
target="_parent">Miscellaneous</a></li>
<li><a href="
http://timlist.net/camping/camping_manufacturers.html"
target="_parent">Manufacturers</a></li>
<li><a href="
http://timlist.net/camping/camping_safety.html"
target="_parent">Safety</a></li>
</ul>
</li>
<li>Customer Service
<ul>
<li><a href="
http://timlist.net/customer_service/customer_service_101.html"
target="_parent">Basics 101</a></li>
<li><a href="
http://www.timlist.net/customer_service/customer_service_reviews.html/"
target="_parent">Reviews</a></li>
<li><a href="
http://www.timlist.net/customer_service/customer_service_reviews_template.html/"
target="_parent">Templates</a></li>
</ul>
</li>
<li>Diesels
<ul>
<li><a href="
http://timlist.net/trucks/diesel_trucks.html"
target="_parent">Diesel Trucks</a></li>
<li><a href="
http://timlist.net/trucks/forums.html"
target="_parent">Forums</a></li>
<li><a href="
http://timlist.net/trucks/fuel.html"
target="_parent">Fuel</a></li>
<li><a href="
http://timlist.net/trucks/misc.html"
target="_parent">Miscellaneous</a></li>
<li><a href="
http://timlist.net/trucks/parts_repair.html"
target="_parent">Parts Repair</a></li>
<li><a href="
http://timlist.net/trucks/studies.html"
target="_parent">Studies</a></li>
<li><a href="
http://timlist.net/trucks/towing.html"
target="_parent">Towing</a></li>
</ul>
</li>
<li><a href="
http://timlist.net/family.html">Families</a></li>
<li><a href="
http://timlist.net/gallery.html">Galleries</a></li>
<li><a href="
http://timlist.net/search.html">Search-It</a></li>
<li>Technology
<ul>
<li><a href="
http://timlist.net/technology/audio.html"
target="_parent">Audio</a></li>
<li><a href="
http://timlist.net/technology/forums_support.html"
target="_parent">Forums</a></li>
<li><a href="
http://timlist.net/technology/graphics.html"
target="_parent">Graphics</a></li>
<li><a href="
http://timlist.net/technology/hardware.html"
target="_parent">Hardware</a></li>
<li><a href="
http://timlist.net/technology/html.html"
target="_parent">HTML</a></li>
<li><a href="
http://timlist.net/technology/java.html"
target="_parent">Java</a></li>
<li><a href="
http://timlist.net/technology/misc.html"
target="_parent">Miscellaneous</a></li>
<li><a href="
http://timlist.net/technology/programing.html"
target="_parent">Programming</a></li>
<li><a href="
http://timlist.net/technology/software.html"
target="_parent">Software</a></li>
<li><a href="
http://timlist.net/technology/stores.html"
target="_parent">Stores</a></li>
<li><a href="
http://timlist.net/technology/forums_support.html"
target="_parent">Support</a></li>
</ul>
</li>
</ul>
</div>

Nav N Go iGO 8

Similar Messages

Maybe you are looking for