Nav turn by turn over bluetooth

I'm streaming music over bluetooth, no problem. Phone works too. But Nav turn-by-turn not coming through. Any ideas?

A2DP – is a Bluetooth profile that allows streaming of music (Listen to Music, Podcasts & More with A2DP Update! This profile is used when using applications on the device other than calls.
These the Jawbone A2DP supported headsets we offer.
Jawbone Icon Bluetooth Headsets - The Catch
Jawbone Icon Bluetooth Headsets - The Rogue
Jawbone Icon Bluetooth Headsets - The Thinker
All the above headsets feature military-grade NoiseAssassin 2.5, for crystal-clear communication. NoiseAssassin 2.5 delivers best in class noise cancellation, wind suppression and call quality. Easily connect and disconnect with dedicated on/off switch. Spoken updates keep you connected, delivering in-ear caller ID, battery status and more.
All headsets can be found at www.verizonwireless.com under the accessories tab and headsets.
Copy and paste the link below into your browser address bar for the Bluetooth pairing guide.
http://www.verizonwireless.com/b2c/bluetooth

Similar Messages

I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

I haven't tried it yet, but I believe this would disconnect Bluetooth for both the phone and music. I have a 2013 Hyundai Sonata if this will help.

No ability to turn on Bluetooth - T61 - Windows 8

I recently upgraded my T61 7658 CTO to W8. Now I've lost the ability to turn on Bluetooth. I press Function F5 and only get the Windows Networks Connections Charm on the right side of the screen, but nothing about Bluetooth, or the old "power on wireless radios/ Bluetooth" window. Any ideas?
Solved!
Go to Solution.

With new version of HotKey Features (8jvu39ww.exe) the BT&WiFi PowerRadiosSwitching works native over keyboard Fn+F5 !!!
(I tested this on Windows 8.1 Pro x64)

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

I have an ipad4. Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

Hi CollinGCC78,
It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
Regards,
- Brenden

AppleScript to turn off Bluetooth after an hour of no usage

I'm interested in making an AppleScript that will turn off Bluetooth after a bluetooth device is not used for (let's say) one hour. The script should run only on battery life, not when the computer is plugged in.
Any ideas on how to start? Thanks.

I don't think there's any way (at least easy way) to do this.
AppleScript is very good at initiating events, but not good at responding to them. As such it's not easy to write a script in this manner. About the only way to do this would be to have a stay-open script that periodically checks the list of connected devices and keeps track of when the last bluetooth device was used - however, there's a big difference between being 'used' and being 'connected'... you may have a bluetooth headset 'connected', but if you're not running any audio apps it might not be used, and that's hard to AppleScript to determine.

How do I turn on bluetooth? - windows 8

Hey all,
I've been googling for a while now, and still haven't found anything relevant to me. I have a mid-2012 macbook pro running windows 8 through bootcamp and I've been trying to pair a bluetooth mouse. Bluetooth drivers seem to be installed (Apple Broadcom Built-In Bluetooth - v 5.0.1.0), but I cannot turn on bluetooth anywhere. The switch to turn on bluetooth under wireless devices (charms bar > settings > change pc settings > wireless) isn't there. What can I do?

on my imac I can't recall the group (the ones you click on it the left list) but in one of them it have the blue circle with the bluetooth icon on it of cause one have to install the drivers for bluetooth to work

How to turn off Bluetooth adapter via command line or script?

I'm trying to write a batch script that will be able to turn on/off any connected Bluetooth adapters.
In the "Bluetooth Settings" window, how can I change the "Turn off Bluetooth adapter" setting via command line or script?
Due to my account not being verified yet, I cannot post a screenshot. I will update this thread as soon as my account is verified.

get-service -DisplayName 'Bluetooth Support Service' | Stop-Service
¯\_(ツ)_/¯

My volume is greyed out when I turn on the Mac, but for some reason it works again when I turn on bluetooth. Nothing in system prefs changes this???

My volume is greyed out when I turn on the Mac, but for some reason it works again when I turn on bluetooth. Nothing in system prefs changes this??? Its all very random and sometimes I do not have this problem at all or it is fixed again when I restart the Mac.

please let me know if you figure out how to do correct it because mine has exacly the same problem.

How to completely turn off Bluetooth and Wireless

Hey everybody,
I'm running Windows XP SP3 via Boot Camp and I was wondering if anyone can assist me in how to completely turn off Bluetooth and Wireless connectivity so that I can reserve as much batter life while being in class taking notes without a plug-in source, but not uninstall. I know there is a Bluetooth control panel and I disabled it there but under "connect to" its still remains there. Basically I want to have the Bluetooth and Wireless turned off completely when I startup and still have the icons shown in the taskbar to let me know that they are still there.
Thanks!

Joergen Thomson, I can see that you have the same thoughts like I do, I wish they could release a software that is stable and better then this.
I dont have the energi or time to report all flaus back to cisco, this product have taking to much of my time and frustration already. Thank you so much for all the time you spend to try get this product stable and hopefully a good product.
I have a costumer that have a webservice that is IP restricted, For now I have to define more then 93 policys openening for the same service because this doesnt handle address list and groups. And all the times I had to set it back to factory default becasue of HTTP Admin server stopped, VPN Problem, Firmware Upgrades, "Packet Loss" and so on takes alot of time becasue I need to reconfig policies back.
For now to they release a firmware is stable I have take this piece off the network and put the back a old Fortinet 60 box.

Mac Mini won't turn over

Hi folks,
A mac mini in my household won't turn over. It gets to the grey Apple screen with the spinning search circle, but stays that way.
The strange behaviour began after I installed the latest security and safari update via Software Update.
I tried resetting the pram, using the included install disk to check the HD with disc first aid with no results. Will I have to re-install the OS now?
Mac Mini PowerPC g4 / 1.5ghz / 512 mb RAM
Your collective help is appreciated.

Welcome to Apple Discussions!
The symptoms you describe and the circumstances in which it occurred are often indicative of a problem with prebinding, and can be caused for example by running the system on other tasks while also applying updates. Prebinding is the process whereby MacOS links executables with their library files, and when it is damaged it can cause the system to become unresponsive or fail.
When you say that you used the install disk to check the HD 'with no results' I assume you mean that it found no problem. Given that you were able to boot the system with that disk, it demonstrates that the system is healthy, so at that point and assuming you did not get any errors when testing with Disk Utility, I would suggest you boot to the install disk again, and select the option to 'archive and install' (an option that is reached by clicking the button for a custom installation). Archive and Install will put a fresh copy of macOS on the drive, but leave your applications and files untouched. Once the new MacOS copy is installed, you can boot as normal and then I would urge you to download the 10.4.11 combo update from the Apple downloads page (http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html) and install that, before running Software Update to grab any additional updates required.
Ensure you are not running any applications or performing any other tasks on the system when performing updates - particularly not when you see the system reporting 'Optimizing system' towards the end of an update. This is when the system is actually updating prebinding, and where running anything else can cause problems. This was a known issue and was resolved in MacOS 10.5.x by a different routine for updates.
As always when doing this kind of work, it is strongly advised that you ensure you have a good backup of all your data first.

The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it. What else is there to do?

The wireless keyboard is not working with my iPad2. I turned on bluetooth and paired the device. What other hidden step is there to do?

Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off. Later, when I tried the keyboard again, it worked. I guess the bluetooth process takes longer than expected. So thank you for taking the time to help a technically impaired person!!

IPhone5 doesn't turn on bluetooth at all!

IPhone5 doesn't turn on bluetooth at all!

it could be a lag
it could be a screen issue meaning its about to fail
or you could be using a phone case that has magnet which can potentially harm the phone in the long run.
has this ever occurred on the v21? or is this new to v30?
has anything else happened to the phone? usually firmware updates do not cause such behavior.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

How to turn over camera-images?

Except for photo's I can make short film-shoots with my Fuji Finepix camera. When I import the images in Iphoto, it's not possible to turn-over the video-file, different then photo's. When I play the movie in Iphoto, or in Imovie, the video remains in the wrong position. Does anybody knows how to turn over the video-file in the right position?

Dear Smtr,
Thank you for your answer. But how do I rotate video-clips in Iphoto? The rotate-button turns gray when a video-clip is selected. Of course I can check my software, but it would be easier to solve it in Iphoto.

Query for turn-over to end-users

Hi Friends,
I have create a query called "query1.sql" which print monthly summary report to excel/csv.
Can I automate this query for turn-over to user/operator, so that the user will just invoke run-time program only to produce the desired output? or maybe create a menu or something to make the query run?
Thanks a lot,
Ms K

Not in the current releases. You can vote for the existing requests for automation/command line at the SQL Developer Exchange, to add weight for possible future implementation.
And yes, I suppose you could create a User Defined Java Extension to automate through a menu option or something.
Have fun,
Mr. K.

Nav turn by turn over bluetooth

Similar Messages

Maybe you are looking for