Navbar not working if pages are resized

Apparently iWeb does not take kindly to viewers resizing pages in a browser so
as to make the typeface more readable. In my applications, every time I do this the Navbar stops working.
I can resize the text back to the original size, and refresh the page, then everything is fine.
This has nothing to do with whether the text is in "grey handle" or "white handle" boxes- the Navbar stops working if you enlarge the type in a browser.
I assume everyone knows by now that with "grey handle" text boxes, the page size will grow with the enlarged text. With "white handle" boxes, the enlarged text gets cut off (e.g. the web page size does NOT grow.)
Any suggestions on the Navbar problem. BTW: I use standard iWeb templates here, almost always the "Welcome" page in every case.

The navbar has to be designed to be
moved down as the Title Text expands, not remain
stationary.
nonquitt....
Thanks for doing the sleuthing work here. I think you have identified a valid design issue, though you must understand that when a webpage is designed to a certain appearance, it's hard for me to expect the appearance (much less the function) to stay intact when an external force like a browser tries to override things and change the appearance unilaterally.
But in the interest of good iWeb page design, I suppose it's possible to anticipate this phenomenon now that you have pointed it out and design accordingly, especially if your audience is likely to use their browsers' text size manipulation. So in a sense this can be considered your workaround (in lieu of the previous suggestion of making iWeb convert your text to a graphic)...
Just adjust the header size and the position of the header elements so that there is less likelihood of them overlapping with the largest text size settings in a browser. I mean, it has been previously reported that overlapping elements can disable the functioning of the navigation menu....so just allow for more "breathing room" between the header text and the navigation menu area and perhaps increase the size of the header section in order to accomodate all the elements properly.
I think you could take this, incorporate it into your web design, and really make it work for you and your viewers. Keep up the good work! Best of luck to you!

Similar Messages

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

My curser does not work in Pages. I cannot type.

My curser is not working in Pages. I cannot type.

Open a Word Processing document, sounds like you have opened a blank Layout template which has absolutely nothing to type into, you need to add Textboxes or Shapes.
The Word Processing templates are labelled in the sidebar of the Template Chooser.
Peter

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHero

If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )

My "Group" feature is not working in Pages 5.0.1. Any help here?

My "Group" feature is not working in Pages 5.0.1. Any help here?

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

The music on my iPhone 4 with the new ios7 is not working. There are red dots next to the selections and I can not here any music when I touch the spots. I just downloaded the iOS 7. What went wrong? Everything else seems to be fine

The music on my iPhone 4 is not working. There are red dots next to the selections and no sound occurs when they are touched.

Can you play those songs in iTunes on your computer?
Make sure they are all part of your iTunes library before you sync and that they were bought with the same AppleID you use on your phone.

My ipad 4th gen touch screen is not working in one area

I had a screen replacement and now the Ipad 4th gen touch screen is not working in one area ( a strip across the middle). We tried 3 different touch screens with digitizer...any ideas?

Since Apple doesn't replace screens, they replace the iPad, I presume you had your screen replaced by an unauthorized service provider or perhaps you replaced it yourself. That voids the warranty and the ability to get assistance from Apple. If someone else replaced your screen take it back to them and demand the correct the problem.

My ipad safari and mail are not working. Why are they blank when I clickclick on them?

My ipad safari and mail are not working. Why are they blank when I

For Safari try clearing it's cache : Settings > Safari > Clear Cache (and Clear History).
You could also try closing the two apps completely : from the home screen (i.e. not with Safari or Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail and Safari apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Loading web pages from many sites do not work, most sorcecode are lost somewhere

In win XP installing Oracle virtualbox os=suselinux + firefox 3.6.10 all
webpages works!
But, on win XP firefox 9.0.1. many web pages only last html source
code are visible in the webpage. Mozilla support only avaible inside in the WM-box on old firefox!!!
To hard to remove plugins, fix it!!
Disable of all plugins, more wegpages work, but not all!!
Iam using telenor mobile internet, ASUS mb, amd2, XP 2002 service pack 3. On two computers, same errors!
Have done 3 reinstallations of firefox 9.0.1 , still not work!

In win XP installing Oracle virtualbox os=suselinux + firefox 3.6.10 all
webpages works!
But, on win XP firefox 9.0.1. many web pages only last html source
code are visible in the webpage. Mozilla support only avaible inside in the WM-box on old firefox!!!
To hard to remove plugins, fix it!!
Disable of all plugins, more wegpages work, but not all!!
Iam using telenor mobile internet, ASUS mb, amd2, XP 2002 service pack 3. On two computers, same errors!
Have done 3 reinstallations of firefox 9.0.1 , still not work!

Page numbers not working in pages

Help!
I'm working on a document that will be 100+ pages, printing it double sided to be bound together. I would like to have the pages numbers listed in the footer on the outside of the page as well as some text in the center of the footer. Working with Pages '09 version 4.1.
I have "facing pages" selected. "Left and Right pages different" selected. "Use previous headers and footers" selected. I selected "Insert Auto page numbers" and told it to put them on the outside.
The problem - only some pages have the numbers on the outside like I selected. Pages 1-12 have the page numbers are all left justified. Pages 13-16 are correct. Pages 17-23 have the page numbers are all left justified. So on and so forth. There is no rhyme or reason why some of these are different. I do have different sections in the document - but sometimes it's in the middle of the section that it decides to change the formatting on me.
On top of that, I added the text I wanted in the center. On some pages it's there, others it isn't. And again, no rhyme or reason as to why. Sometimes, the page numbers ARE in the correct place, but the text IS NOT there. Sometimes the page numbers ARE NOT in the correct place, and the text IS there. Leaving me with very few pages that are 100% correct.
The only thing I have going for me at the moment is that every page has a page number on it! I suppose that's something. And I believe I know how to go in and change the footers individually. But, like I said, this will be 100+ pages, I'd really like to just do it once, not individually for each page.
Help please! Thanks!

Hello black94,
Ok I can load the WinForm project and know part of your game, although I'm not so sure how to play the game. I cannot understand your language.
When I checked the WPF project it seems you build the UI with WPF and only write events here, I haven't find binding related xaml code. Anyway, can you quote the problem or code about how you insert the white cell in WPF?
For the printPreviewDialog, I see you already asked about this question before:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/ee97efd9-9245-4972-8576-a5230fb520e7/printpreviewdialog-in-wpf?forum=wpf
So the following place is where the error raised?
PrintDocument printdocument = new PrintDocument();
System.Windows.Controls.PrintDialog printDialog = new System.Windows.Controls.PrintDialog();
System.Windows.Forms.PrintPreviewDialog printPreviewDialog1 = new System.Windows.Forms.PrintPreviewDialog();
//this.printPreviewDialog1.Document = this.printDocument1;
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Assistance pls: ~50% links not working on page, iWeb 3.0.4

I built a new page on a longstanding iWeb site last night, uploaded it (to my own domain hosted at Earthlink) and discovered that about 50% of the links on the page are not working, though all the links are formatted identically.
Here's the page:
http://www.MarynMcKenna.com/magazines.html
Here's how this page is built:
     - Each visible box is a shape
     - Within each shape is a text box with outline set to None
     - Each link was individually cut-pasted into Inspector (I have double-checked that none of them pasted 2x.)
     - I have checked that, in Inspector > Hyperlink, the settings for each link are:
          - Enable as a Hyperlink
          - Link to an External Page
          - Open link in new window
Also, I have checked (Command-Shift-L/Command-A) that the boxes are in the Body of the page, not in the Header, Footer etc.
When I am in iWeb, all of the links work fine.
When I upload the page and check it at Earthlink, however, the links in the larger boxes (Scientific American, Self, Annals) don't work.
I cannot see any reason why this would be going on. Any thoughts would be welcome.

Use the Inspector/Text/Text pane to adjust the inset margin to assure a uniform margin around the text in the text box. This screenshot is without any margin:
And this is with a margin added:
OT

After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?

Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

Share by email is not working in pages 09

Recently got a Mac Mini for my wife. We have drifted into the Apple world by way of iPhones and iPads and are making the switch from Windows. In any case my wife wrote a document in pages today and wanted to send it to a friend who is still in the windows world. I decided the best thing was to send it as a .pdf. When I click on the share menu item in Pages, the "send an email" choice is grayed out and unselectable. The three format choices are there on the menu in bold but when I try to select one nothing happens. No email is initiated or anything. I can hear the disk click a couple of times but that is it. What am I missing? Why is this not working. I found a work around but it will not work for my wife, she is not a technical type and "it just works" is one of the reasons we are switching to Macs. Thanks.
Harry

It should just work.
Is there anything different about the document?
The name should not include any illegal characters such as a / or *.
If that doesn't work download ONYX and run the "Automation" option with the default settings.
Peter

Inline with text not working in pages 5

I just upgraded to Pages 5.0. A lot of functionality has been removed, but also at least one feature that is there is not working for me. Inserting an image onto a document and setting up the image to "move with text" and "inline with text" is not working, as the image is staying fixed, and there is text wrapping around it. The interesting thing is that old images inserted and setup the same way using Pages 4.3 are moving with the text correctly, and there is no wrapping. Help!

You will have to use File > Revert to or File > Export to > Pages '09.

Links in template header to not work when page is in different folder

Hello
I have the following problem: In the header of the template, the links of the menu are written absolute not relative, i.e. http://www.nabilvoyage.com/html/tours.html (not ../html/tours.html). This header is embedded in a template. If I use this template for a html page which is not in the same main folder, the links do not work (see:http://www.nabilvoyage.com/swf/gallery1.html). Can someone please help? Thank you very much.
Sarosa
The template code is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<META NAME="keywords" CONTENT="Morocco, Transportation, Agency, Transport, Travel, Holiday, Tours, Trips, Morocco Festivals, Morocco Maps, Morocco History, Casablanca, Marrakech, Sahara">
<META NAME="description" CONTENT="Specialized Moroccan Transport Agency offers a variety of trips all over Morocco, wepages offers, Prices, Information about Moroccan History, Morocco Map, Morocco Festival Calendar etc.">

<title>Morocco Ouarzazate Travel Agency - desert trips, excursions</title>

<style type="text/css">

</style>
<script src="../scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
<link rel=”shortcut icon” href=”http://www.nabilvoyage.com/favicon.ico” mce_href=”http://www.nabilvoyage.com/favicon.ico”/>

</head>
<body onload="MM_preloadImages('../pictures/about_down.jpg','../pictures/about_over.jpg','../pi ctures/tours_down.jpg','../pictures/tours_over.jpg','../pictures/photo_down.jpg','../pictu res/photo_over.jpg','../pictures/morocco_down.jpg','../pictures/morocco_over.jpg','../pict ures/links_down.jpg','../pictures/links_over.jpg','../pictures/contact_down.jpg','../pictu res/contact_over.jpg','../pictures/home_down.jpg','../pictures/home_over.jpg')">
<table width="878" align="center" cellpadding="0" cellspacing="0" bordercolor="#D4CBB9" class="table1body">
<tr bgcolor="#D4CBB9">
    <td width="872" height="90"><div align="center"><img src="../pictures/header.jpg" alt="nabil voyage header" width="870" height="90" class="headerpicpadding" /></div></td>
</tr>
<tr bgcolor="#D4CBB9">
    <td width="872" height="20"><div align="center">
      <table border="0" cellpadding="0" cellspacing="0">
        <tr>
          <td><table width="870" border="0" cellpadding="0" cellspacing="0">
            <tr>
              <td><table border="0" align="center" cellpadding="0" cellspacing="0">
                <tr>
                  <td><a href="http://www.nabilvoyage.com/html/home.html" target="_top" onclick="MM_nbGroup('down','group1','Home','../pictures/home_down.jpg',1)" onmouseover="MM_nbGroup('over','Home','../pictures/home_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/home.jpg" alt="Home button" name="Home" border="0" id="Home" onload="" /></a></td>
                    <td><a href="../../about.html" target="_top" onclick="MM_nbGroup('down','group1','About','../pictures/about_down.jpg',1)" onmouseover="MM_nbGroup('over','About','../pictures/about_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/about.jpg" alt="About button" name="About" border="0" id="About" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/tours.html" target="_top" onclick="MM_nbGroup('down','group1','Tours','../pictures/tours_down.jpg',1)" onmouseover="MM_nbGroup('over','Tours','../pictures/tours_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/tours.jpg" alt="Tours button" name="Tours" border="0" id="Tours" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/galleries.html" target="_top" onclick="MM_nbGroup('down','group1','Photogallery','../pictures/photo_down.jpg',1)" onmouseover="MM_nbGroup('over','Photogallery','../pictures/photo_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/photo.jpg" alt="Photo gallery button" name="Photogallery" border="0" id="Photogallery" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/morocco.html" target="_top" onclick="MM_nbGroup('down','group1','Morocco','../pictures/morocco_down.jpg',1)" onmouseover="MM_nbGroup('over','Morocco','../pictures/morocco_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/morocco.jpg" alt="Morocco button" name="Morocco" border="0" id="Morocco" onload="" /></a></td>
                    <td><a href="http://www.nabilvoyage.com/html/links.html" target="_top" onclick="MM_nbGroup('down','group1','Links','../pictures/links_down.jpg',1)" onmouseover="MM_nbGroup('over','Links','../pictures/links_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/links.jpg" alt="Links button" name="Links" border="0" id="Links" onload="" /></a></td>
                    <td><a href="../html/contact.html" target="_top" onclick="MM_nbGroup('down','group1','Contact','../pictures/contact_down.jpg',1)" onmouseover="MM_nbGroup('over','Contact','../pictures/contact_over.jpg','',1)" onmouseout="MM_nbGroup('out')"><img src="http://www.nabilvoyage.com/pictures/contact.jpg" alt="Contact button" name="Contact" border="0" id="Contact" onload="" /></a></td>
                  </tr>
                </table>              </td>
              </tr>
            </table></td>
          </tr>
      </table>
    </div>      <div align="center"></div>     </td>
</tr>
<tr bgcolor="#D4CBB9" class="bottom_padding">
    <td height="280" align="center" bgcolor="#D4CBB9">
    </td>
</tr>
<tr class="bottom_padding">
    <td height="23"><table width="874" border="0" align="center" class="bottom_padding">
        <tr>
          <td height="20" bgcolor="#c0b2a1"><div align="center" class="bottom_padding"></div></td>
        </tr>
    </table></td>
</tr>
</table>
<p align="center"> <span class="style2">© Nabil Voyage 2009 - <a href="http://www.photo-emotions-morocco.com" target="_blank">Realisation Photo Emotions S.A.R.L</a></span><br />
</p>
</body>
</html>

Only you will know for sure what you are dealing with, but I do not see the same complete url code in the header of the page you say has a problem. I only see the page filename linked (not http:///www..., just home.html). It may be a case of those pages not using the same template.

Navbar not working if pages are resized

Similar Messages

Maybe you are looking for