Navigate from report to dashboard and pass values between different column

Hello
I have a question about navigating from 1 report to a dashboard page while passing the value from column 1 to column 2 in the second report...
In OBIEE 11G, I create action link on report 1, column 1 and this action link is navigate to BI Content and the destination is a dashboard page, which has column 2 used as dashboard prompt and there are 3 reports all use column 2 to filter. Now the column 2 in the dashboard page is an alias of column 1 from report 1, from user's point of view they are the same, but from OBIEE point of view they are different.
My action link is able to navigate to dashboard, however, the value in column 1 which I clicked to execute the navigation, does not get passed to column 2 as the dashboard prompt doesn't get this value upon navigation..
Since I can't put column 1 in dashboard 2 nor can I put column 2 in report 1. Because our data model is done in the way that if I use column 1 or column 2 in both places, it will be circular joins...
Is there a way around this issue?
Let me know if I need to provide more clarification
Thanks

Sid
Here is the thing..
Let's say we have Dimension 1, dimension 2 and fact 1 and fact 2
In one report, you need to show Dimension 2 and fact 1 so Dimension 2 joins to fact 1.
In some other cases, you need to shown dimension 1 and fact 2 stuffs, but dimension 1 can't get to fact 2 without going through dimension 2. So Dim 1 --> Dim 2 --> Fact 2
Then in some other cases, you need to show Dim 1 and Fact 1 reports..
In means, your model will look at:
Dim1 --> DIm2 and Dim 1 --> Fact 1 and Dim 2 --> Fact 1.. This is just a simpler version of a much more complex model that I am dealing with now..
So in this case, you can't just use Dim 1 attributes across the board. For some dashboards, you will have to create alias of Dim 1, call it A1_Dim1, un-join Dim1 with Dim 2 or to fact 1 to avoid circular joins... Then in different reports, you either use columns from Dim 1 or A1_Dim1..
Now Dim1 and A1_DIM1 are really the same thing, but they are not according to OBIEE...
So my problem is, in report 1 where Dim1 is used, it can't past values to Dashboard 2 where A1_DIM1 is used as dashboard prompt..
I want to know if there is a way around this issue
Hope this makes more sense now
Thanks

Similar Messages

Navigate between 2 reports and pass values between 2 different columns

Hello
I have a question about navigating from 1 report to another while passing the value from column 1 to column 2 in the second report...
In OBIEE 11G, I create action link on report 1, column 1 and this action link is navigate to BI Content and the destination is report 2. Now report 2 has column 2, which is an alias of column 1 from report 1, from user's point of view they are the same, but from OBIEE point of view they are different.
My action link is able to navigate to report 2, however, the value in column 1 which I clicked to execute the navigation, does not get passed to column 2 in report 2..
Is there a way around this issue?
Let me know if I need to provide more clarification
Thanks

Thank you Anirban
I think this is the best solution you just provided.The current post and the post at below looks same
Navigate from report to dashboard and pass values between different column
is it not answered?
Thanks :)
Edited by: Srini VEERAVALLI on May 7, 2013 3:07 PM

Query from the data abse and pass values to a pdf form

query from the data abse and pass values to a pdf form
Hello
Hello i have this html report that i have written to output a
report.
now, i am assigned to pass the same fields to a pdf form so
the fields in the adaobe form can be populated or the term
Pre-populate the form.
can anyone help me get started.
first i would like to know if it can be done.
second, what do i need to get started (tools )
third how do i do this.
i am really lost at this point.
can anyone give me tips in how to approach this
subject??

It can be one using Adobe Acrobat Designer which is packaged
with Acrobat
Professional Pro 7. It uses all XML to create and populate
forms.
If you had the time, you can also create <cfdocument
type="pdf"> to have
them ready and just pass the info to it so it autogenerates
the PDF on the
fly.

Connecting Crystal reports with dashboards and passing parameters

Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.

Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu

Pass values between different frames

Dear Friends from Adobe.
I need a lot of help from you.
I have a project with Flash Action Script 2.0 and would like
to know if you have to pass values between different frames.
Example:
Passing a value of a inputbox the frame 1 for a inputbox in
frame 2.
OBS: If possible could pass the solution through e-mail?
Now, very grateful.
Diogo Areas.

Using AS2 you can either name the input textfield instance on
the stage or, you can name the variable property of the input
textfield. You can name either of these from the Property Inspector
window. Once named, you can then have access to the value of the
text that is entered. It will be either instanceName.text or
variableName.
The scope of either of these values lasts only as long as the
textfield instance exists. So, if the first textfield is in frame
7, for instance, and is only in frame 7, and you want to use the
value in another frame, say frame 20, then you'll have to store the
value outside of the textfield for later use. You can do this by
creating a variable in the first frame of the movie, and then
placing the text from the textfield in frame 7 into that variable.
Then at frame 20, you can retreive that value and use it in the
textfield in frame 20.
Alternately, you can continue the instance of the textfield
in frame 7 out through frame 20. The content will continue to be
available. You can add keyframes to the layer that the textfield is
in at frame 7, and move the object off the visible area of the
stage, so that it won't be seen, if you like.

Adding New Field and Passing Values Between Screens

In the Oracle Projects Create Project screen, I've been asked to add a new LOV for Organization (LOV copied from a subsequent page) - and then pass the selected value to the next page and default in the value based on the selection on the first page.
I understand I'll be modifying the first page's XML to add the new LOV, but how can I get the second page to recognize the value selected on the first page? Do I need to pass this as a parameter?
Thanks in advance for your help!

Thanks - I understand that the CO should not be extended, and other posts in this forum mention that the AM should not be extended either.
What is the recommended extension path in a scenario like the one I describe above (adding a field to a seeded page and trying to pass it to the second page)?
Sorry for all the questions - I couldn't find this scenario described elsewhere in the forums!

How to call one Main MXML from another main MXML file and pass values between them?

Hi,
I am trying to populate a datagrid from a XML file ,which I have done successful
I am able to get data out of the datagrid on clicking on any element
Now when I click on any element in datagrid I want call a new mxml file which is also have Aplication tag and I want to pass that value of clicked element to it
This is the code I am using for getting data from XML into data grid in 1st MXML file and the XML file used.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:s="library://ns.adobe.com/flex/spark"
                 xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" initialize="exp.send()">
     <fx:Declarations>
         <s:HTTPService id="exp" url="expLab1.xml" result="
resultHandlerQuestionBar(event)"/>
     </fx:Declarations>
     <s:Panel x="74" y="218" width="485" height="333" title="Work On Configured Experiments" id="p1" fontSize="14" chromeColor="#9BFDAB" dropShadowVisible="false" contentBackgroundColor="#E4EEE6" contentBackgroundAlpha="1.0" backgroundColor="#67B6AC" textAlign="left">
          <mx:DataGrid x="35" y="33" width="338" height="88" dataProvider="{experimentdetails}" chromeColor="#FCFCFC" contentBackgroundColor="#FFFFFF" selectionColor="#FAFBFD" rollOverColor="#FCFDFF" focusColor="#FCFDFD" itemClick="onItemClick( event );">
              <mx:columns>
                 <mx:DataGridColumn id="j1" dataField="experimentName" headerText="" itemRenderer="jaya">
                 </mx:DataGridColumn>
              </mx:columns>
         </mx:DataGrid>
     </s:Panel>
     <fx:Script>
         <![CDATA[
             import mx.collections.ArrayCollection;
             import mx.controls.Alert;
              import mx.events.FlexEvent;
             import mx.events.ListEvent;
             import mx.rpc.events.ResultEvent;
             [Bindable]
             private var workbenchname:ArrayCollection;
              //private var a:String;
             private function resultHandlerQuestionBar(event:ResultEvent):void
                experimentdetails=event.result.List.experimentList.experiment;
             [Bindable]
             private var experimentdetails:ArrayCollection;
              private var alert:Alert;
private var data:String;
             private function onItemClick( e:ListEvent ):void {
   data= experimentdetails.getItemAt(e.rowIndex).experimentName.toString();
                alert=Alert.show(experimentdetails.getItemAt(e.rowIndex).experimentName.toString());
         ]]>
     </fx:Script>
</s:Application>
and the xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<List>
   <workbench>Basic Movement</workbench>
     <experimentList>
       <experiment>
         <experimentName>Distance with varying time</experimentName>
         <Rating>2</Rating>
         <expNO>1</expNO>
       </experiment>
       <experiment>
         <experimentName>Distance with Constant time</experimentName>
         <Rating>1</Rating>
         <expNO>2</expNO>
       </experiment>
       <experiment>
         <experimentName>Time taken while decelerating</experimentName>
         <Rating>3</Rating>
         <expNO>3</expNO>
       </experiment>
      </experimentList>
</List>
Now the code for 2nd MXML is as follows
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                     xmlns:s="library://ns.adobe.com/flex/spark"
                     xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
      <fx:Declarations>
            
      </fx:Declarations>
      <s:Label text="lable1" >
      </s:Label>
</s:Application>

Check out ExternalInterface class:
http://livedocs.adobe.com/flex/3/html/help.html?content=passingarguments_2.html
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex Training and Support Services

Open a web page and pass values from a java file

Hi,
I need to open a web page and pass values in the text boxes.
Finally submit needs to be triggered. All this needs to be done from a java file. i.e instead of entering my values in a web page and submit, i need to do it from my java file..
Any inputs so that I proceed in the right direction..or is there any alternate way to achive this ??
Thanks in advance..
Sid

I hava found a lines of jaa that can open a URL , lets say www.net.java
You can open it writable or not.
It is half of the job you need.
If you are interested.
I am wrinting a program to print a URL , and have developed this small
code.
Angel Portal

Use context to pass value between JPF and Java Control

hi,
Can we use context to pass value between JPF and Java Control? It works if i m using InitialContext in the same machine but i dun think it will works if i put Web server and application server in different machine. Anyone have an idea how to do it?
I also want to get the method name in the onAcquire callback method. Anyone knows how to do this?
thks
?:|

Hi.
Yoy can the next options for make this:
1. Pass your values in http request.
example: http://localhost/index.jsp?var1=value1&var2=value2&var3....
2. You can use a no visible frame (of height or width 0) and keep your variables and values there using Javascript, but of this form, single you will be able to check the values in the part client, not in the server. Of this form, the values of vars are not visible from the user in the navigation bar.
Greeting.

Passing values between jsp and php

hi there, is it possible to pass values between jsp and
php? i really need to find out the way if there is
any. thanks in advance
-azali-

Yes, there are a few ways to do this.
1) Think about using Cookies.
2) Maybe use a Redirect passing the values in the Query string.
3) Retain the data in a repository in the back end.
4) Using Hidden fields within your pages.
I am sure you can use these Idea's for a base to develop other methods on how to pass values back and forth from JSP -> PHP and vice versa.
-Richard Burton

How to pass value between models?

Dear all,
I use VC 7.0 composer to create dashboards. That include one overview dashboard (model) to show seven KPI in one screen and I also have seven detailed dashboards (models) to show the detail of each KPI. Each dashboard has their own iView . User will only need to pick a plant once at the overview dashboard and I expect the plant value will be passed to other seven detailed dashboards.
Since those dashboards are saved in different models, I just wonder is it possible I can pass the value from the overview dashboard model to the separated detailed dashboard models? The reason I donu2019t put all dashboards in one model because I need to have different reports assigned on the left of the screen for each dashboard in portal. If I need to accomplish this in portal, I believe I need separate iView(model) for each dashboard. Please correct me if I am wrong since I am new to portal development. Thanks.

I think it is possible to pass values between models.
Just creat on "Write-RFC" and one "Read-RFC"
The RFC has just the function to write/read a value into an customer table...
^^ We have tried this scenario and it works perfect.
Regards
Florian

Pass values between pages

Hello experts!
I am trying to pass value between two pages without page submit.
I set item value from first page to session state by dynamic action. Then I am trying to pass this value to second page, I use button which redirects to second page and sets item value on second page with value from first page.
But approach this does not woks as I expected. The value from the first page is not passed to the second page when I click on button. Value is passed to the second page only if I:
1. set some value to item on first page (e.g. XX);
2. click on button which redirects to the second page;
3. get back to first page;
4. set some new value to the item (e.g. YY);
5. click on button;
6. then the first value from session state is passed to sthe econd page (value XX)
Could anybody tell me where I make a mistake, or what is wrong in my solution?
Test appl.
www.apex.oracle.com
http://apex.oracle.com/pls/apex/f?p=9027:LOGIN_DESKTOP:6946284921064
workspace: kurintest
username: [email protected]
passwd: kurintest
appl: 9027 pass_value
Thanks in advance!
Jiri

Jiri N. wrote:
Hello experts!
I am trying to pass value between two pages without page submit.
I set item value from first page to session state by dynamic action. Then I am trying to pass this value to second page, I use button which redirects to second page and sets item value on second page with value from first page.
But approach this does not woks as I expected. The value from the first page is not passed to the second page when I click on button. Value is passed to the second page only if I:
1. set some value to item on first page (e.g. XX);
2. click on button which redirects to the second page;
3. get back to first page;
4. set some new value to the item (e.g. YY);
5. click on button;
6. then the first value from session state is passed to sthe econd page (value XX)
Could anybody tell me where I make a mistake, or what is wrong in my solution?A redirect button and it's target URL—including items to be set and their values—are rendered on page show, in this case before <tt>P2_ITEM1</tt> has a value. Look at the page source when the page is first rendered:
<input type="button" value="Button1"onclick="apex.navigation.redirect('f?p=9027:3:11397156385140::NO:RP,3:P3_ITEM1:');" id="P2_BUTTON1" />No value substituted for <tt>&P2_ITEM1.</tt> in the URL.
Why do you want to navigate between these pages without a page submit? As APEX has to render page 3 anyway, why not submit and branch?

Pass Values between two Function Modules RFC in Portal

I need to pass values between 2 FM RFC.
I have an implicit enhancement in HRMSS_RFC_EP_READ_GENERALDATA RFC function module.
PERNR LIKE PSKEY-PERNR
ENHANCEMENT 1 Z_ESS_EXPORT_PERNR.    "active version
EXPORT pernr to memory id 'PMK'.
set parameter id 'PMK' field pernr.
ENDENHANCEMENT.
On the other hand an RFC function module that has the code:
        pmk    LIKE PSKEY-PERNR,
        pmk_2 LIKE PSKEY-PERNR.
get parameter id 'PMK' field pmk.
IMPORT pmk_2 FROM MEMORY ID 'PMK'.
When the execution is done in development environment, the modules function at the level of R3, the "get parameter id" works only if the debbuger is classic, otherwise not work. The Import to memory id never works.
In the environment of quality, r3 do not work any of the 2 sentences. If run from portal (which is as it should be) does not work.
Thanks if anyone can help me get the problem. Both function modules are executed at the portal.
Regards
Edited by: Daynet1840 on Feb 15, 2012 2:02 AM

When the execution is directly in r3, in development environment or quality, does the set / get parameter id. Export / Import memory id not work.
But if the FM are called from the portal, does not the set / get parameter id.
I tried changing the sentence as I indicated harishkumar.dy still not working.
Madhu: They're in different function groups, one is standard and the other not.
Regards
Edited by: Daynet1840 on Feb 15, 2012 3:08 PM
Edited by: Daynet1840 on Feb 15, 2012 3:11 PM

Pass values between panels in different UI files

Hi All,
Is there a way to pass values between panels belonging to User Interface files ? Or is it easier to have one .uir and different .c and .h files ?
Thanks,
Kanu

I should say that it's not possible for you to trap events from the first popup,and this depends on the basic concept of "popup panel".
When you install a popup panel, all user interaction with existing panels is excluded: all focus it aimed at the popup only, no other user interface event is generated. If you launch another popup from the first one, the second popup prevails over the first one and no event can be generated on the first panel until the second one is closed.
Handling a chain of two popup panels while looping on GetUserEvent can lead to unpredictable situation not so easy to untangle.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Passing values between event structure cases

Hello everybody,
I have a question concerning the event structure - how to pass values (let's say a string / the state of a boolean control / the value of a numeric control value / an array of numeric values) between event cases ?
There seem to be 2 situations here :
- when you need to pass the value of the control that triggers an event;
- when you need to pass the value of a control which is modified in an event case.
I have read the documentation but i still do not understand very clearly how to do this. Maybe you can point me in the right direction (maybe some threads on the forum that i have missed).
Thank you very much !!
(KUDOS for everyone who is interested in this )

AndreiN2014 wrote:
- when you need to pass the value of the control that triggers an event;
- when you need to pass the value of a control which is modified in an event case.
The first question isn't worded very well. What exactly are you looking to do? Are you looking for an event that specifically relates to that control? If so, just drop it inside of the event and wire it. Are you looking to trigger multiple events from the same control? Ie, you hit the control, event1 is triggered which then triggers event2 ... ? If so, you might consider taking a look at a different architecture. I can think of very few cases where I'd prefer do this over something like having the button trigger a state and using the state machine architecture.
Others have pointed out the Shift Register. This is the typical way to pass values between one iteration of a loop to another. We can assume you have some sort of loop outside of the event structure to make it run a second time. Put a shift register on this loop and the value wired into it will pass each iteration. But, if it's just a random control, you can also just leave that outside of the event structure and wire it in as well. This will provide the new value to the next occurrence of the event structure.
You really need to define your problem before trying to solve it.

Navigate from report to dashboard and pass values between different column

Similar Messages

Maybe you are looking for