Navigate report from detils level in hierarchy

HI,
I have requirement that i want to have only one report. which is applied for drill down.
Ex: Year, Measure
Year-->Quarter-->Month--> Day
when i drill from year to day and i have to applied navigate to another from day. Is it possible.
Regards,
Mall

user10675696 wrote:
we are using 10g versions.
but in our report contains only two columns that is year and measure column, how to add navigate report to day columns..
Regards,
MalliHi,
As said above you have only year and measure column in report.*Hope you have Qtr,Month,day attributes in your dimension*.then create separate reports with 1),year,Qtr,measure with Year Is prompted.
2)Qtr,Month,Measure with Qtr is prompted.
3)Month,Day,measure with Month Is prompted.
goto each report for eaxmple Year,measure edit column propertires of year column goto column format tab-->Value Interaction-->navigate-->browse and select Year,Qtr,measure report..similary do for rest levels..
or
if you have Time dimension Hierarchy set appropriate level with drill down feature..

Similar Messages

Show data from different levels of hierarchy in a report

Hi,
We have to show Budget Vs Actual for sales. We have multiprovider on two cubes (Plan & Actual).
We want to report using Customer Hierarchy.
Customer hierarchy is like -
Level 1
---> Level 2
> Level 3
> Level 4
> Customer1
> Customer2
> Customer3
> Customer4
Actual data is avbl at Customer but Budget is at avbl only upto Level1 or 2 .
Budget Infocube structure
Level1 Level2 Material Calmonth Sales QTy
Actual Infocube structure
Customer Calmonth Material Sales Qty
So how to create a BEx query so that I can show Budget Vs Actual for avaialble data?
If I drill down uptp Level2 it will show Budget Vs Actual and for further drill downs only actual data.
Thanks,
Vikram.
Edited by: Vikram Kate on Jan 2, 2011 12:46 AM

Any suggestion/ idea pls.
I am sure this is a valid requirement. If anyone know how to do it, pls let me know.
Edited by: Vikram Kate on Jan 21, 2011 1:04 PM

Linked report from second level drill-down level

Hi,
I have a report with two drill-down levels, Dept Id and Job Id.
The requirement is when I am on Job Id drill level; I have to call another report when I click on any of the Job Id. This Job Id is passed to another report and the report is filtered based on that Job Id.
I created a hyperlink on Job Id drill down level successfully. But the problem is I am unable to go to the first level i.e Dept Id. Actually the hyperlink is displayed and the up arrow is not visible to go to the first level.
Is there any way where after creating a link on second level and opening the report in a new window, the drill up functionality can be maintained?
I am using Business Objects XI 3.1 version.
Thank you.

hi
there is another way to drill down the report of web intelligence.for that we have to customize in the universe level create a folder in custom hierarchy and add your two objects to that folder, i.e empid. and deptid. the order of these objects should be in the way the drilling happens that means if you want to drill down from empid. to deptid. then empid. should be the first object of the folder,save and export the universe to the CMS.Then it ready to use for webi report.Build the query for the report and enable the drill option in the report.Now the report is ready for your requirement.
thanks & regards
Sreekanth K

How to retrive the Direct purchase entries from table level? S_ALR_87012050

Hi All
In our current project we need to retrieve the direct purchase report from table level. Can you please provide me the direct purchase related table? Normally we are executing the standard report S_ALR_87012050
to extract the direct purchase entries. We need to know which table has the direct purchase entries.
Regards
K.Gunasekar

K,
Your problem description is still insufficiently detailed.
It appears now that you are searching for asset numbers. Please confirm.
Your selection criteria "Inventory Number NE 0" doesn't appear to make much sense. Inventory number is not a quantity, it is the name of an object. I guess it is meaningful you have some inventory numbers named as '0'. I don't think this setting is causing your problem though.....
You didn't mention which table you accessed to discover that you had a perceived discrepancy. Which table did you browse to see the results you mentioned? Please describe the selection parameters for each table you reviewed, and the results for each table that you examined.
It is also the practice of many companies to archive asset data. If this is the case in your company, then the archived data will not reside in the 'A*" tables.
You mentioned that you used the same parameters to select the data. How did you select "Report Date" when you did the table extract? I am not aware of a field that is named "report date' in any of the tables mentioned.
Rather than slog through tables, you might want to try SE16, view "V_ANLAZ". This is a preconstructed linkage of ANLA and ANLZ that is used by S_ALR_87012050 as a starting point.
I really think you should consult with your ABAPers. In two minutes they can give you your answers. It will take me several messages and probably several days to get you the same answers.
Best Regards,
DB49

Navigating from detail level column in an hierarchy to another report

I have a requirement as folllows:
In one report,i have a drill-down feature enabled on "TIME DIM".
At The detail level of this dimension is "DAY" column.
SO,from this detail level,when i click on "DAY" column, navigation should be done to another report..
Is it possible to navigate so from detail report..
pls let me know the solution for this requirement..
thanks,
seeusass

Instead of Drill down,Give Navigation in first report to child report.But for this you need to create n reports if you are having n number of levels in hierarchy.Then at the detail level report you can give navigation at day level.
Thanks
Don

OBIEE report from multiple facts at different levels

Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
Thanks in advance.

Hi Vinod,
The scenario provided in the link above doesnt match to my issue.
We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
F1 is tied to dimensions D1,D2,D3,D4,d5
F2 is tied to dimensions D3,D4,D5, D6 and D7.
In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
and then does a cross fact join out of box between 2 queries.
But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
Thanks.

Custom Drill from the last level of Hierarchy

I have a dimension hierarchy STAGE which has five levels L1 -> L2 -> L3 -> L4 -> L5
and my fact table have 5 measure columns say M1 , M2 , M3 , M4 , M5 along with the dimension columns .
My requiremetn is to show only the top level hierarchy and one measure column initially:
L1 -- M1
now user have to drill from L1 to L5
L1 L2 M1
L1 L2L3-- M1
L1 L2L3--L4-- M1
L1 L2L3--L4--L5-- M1
by default when the user comes at the last level of hierarchy or the hyperlink to drill futrter gets disabled.
Now my requirement is to show the detail report when the user comes at the last level and the there should be a link on it. when the user will clink on the last level link it should open below report :
L1 L2L3--L4--L5--D1--D2--D3--D4--D5--M1--M2--M3--M4--M5
D1-D5 are other dimension columns which are connected to Fact Table.
Any suggestions??

Abhiiiiiii wrote:
Navigation is also a problem here since the column is coming coming runtime(after drill).What i told u is to use the navigation option insted of drill. So you need to create five reports each one for the particular hierarchy. and set the navigartion target as next level report in the hierarchy. Yes it is not the optiumum solution. But if you dont want the other two solutions given above you need to go with this only.

Report from system on different stock levels-min, max stock levels

hI gURUS,
Is there any Standard Report from SAP system to see on different stock levels-minIMUM stock, maximum stock levels

Hi,
MMBE will not give stock level min and max that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
Regards
Sangeta

System level statics reports from sol man

hi all,
how can i check system level statistics reports from solution manager.
please help me.
rgds
vinnu.

Vinay,
Can you tell us how you solved the issue?
Regards,
Jai Shankar

Reporting at different levels in a Hierarchy

Hi,
How can I report at different levels within a hierarchy? Currently within SAP and BW I have levels 1 to 7, however currently I have to go through level 1 to see any information.
Please let me know, any help much appreciated
Thanks
Bhav

Hi Riccardo,
How can I create variables for selecting nodes of the hier?
I can bring in the hierarchy, but any variables i create only allow me to select different hierarchies.
What I am trying to do is create a report to run for level/ node 1 of 7 (the top level), this would allow users to expand if necessary and also another one that only has level/node 6 & 7, without levels/nodes 1-5.
Any help would be much appreciated.
Thanks
Bhav

How to start WAD report from MSS with Hierarchy ?

Hello to all.
I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
The report receive an org unit and display data for it and for all org units under it in the Org. structure.
I start the report from the MSS.
In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
Thanks, Pazit Atar.

I am also facing same problem.
I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
PLEASE HELP.

Hierarchy org unit to wad report from MSS

Hello to all.
I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
The report receive an org unit and display data for it and for all org units under it in the Org. structure.
I start the report from the MSS on portal.
In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
Thanks, Pazit Atar

I am also facing same problem.
I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
PLEASE HELP.

Combine Similar Request navigate report Issue

Hi,
I have created 2 combine requests, one is for summary level report and another one is for detail level report. i pointed navigate from summary level to detail level report.
My summary level report is a Graph, when i click on Region in the graph it should display country results for that region. But in my report displaying all the countries. My detailed level report also a combine report, i set the is prompted also but not filtering the values.
Can any one please let me know whether combine request can filter the values or not, if yes, please let me know where i missed.
Thanks
Sant

Have a read of document 1070761.1 from support.Oracle.com. There is a clumsy workaround to achieve what you are asking.

Crystal Report Formula for traversing the Hierarchy

Hi Friends,
I have a Hierarchy Node Variable in Query Designer and I use the same in my Crystal Report.
I need to create a formula, which will traverse and find all of the child nodes of the selected Hierarchy Node (through the variable). Could you please let me know if this is possible and send me the code.
Thanks in Advance!
Regards,
Vinaya Paulraj.

Hi Vinaya
In Crystal, under the 'Report' menu, there is an item called ''Hierarchical Grouping Options'. This item allows you to sort information based on the relationship between two fields.
For example:
The following example is based on using the sample database called Xtreme that ships with Crystal Reports and Xtreme's Employee table.
There is an {Employee ID} field and {Reports to} field in the Employee table. These fields both contain an Employee ID number. There can be employees with employees that report to them. In other words, there can be employees that report to a higher level of management. You want to see the overall hierarchy of the employees. To do so, you would use the 'Hierarchical Grouping Option' in Crystal Reports.
To view the employee hierarchy from the Employee table, complete the following:
1. Create a group and group on {Employee ID}. You want to group on {Employee ID} because you want to see the overall hierarchy of employees.
· From the 'Insert' menu, select 'Group'.
· From the 'Insert Group' dialog box, select {Employee.Employee ID} in the first drop-down list.
· Click 'OK'.
2. Create a hierarchical group.
· From the 'Report' menu, select 'Hierarchical Grouping Options'.
· Select 'Sort Data Hierarchically'.
· Select {Reports to} from the drop-down list for 'Parent ID'. In this example, the {Reports to} field is the parent field; therefore, we must select it in the 'Parent ID' field.
3. Indenting the hierarchical group, you must enter a value between 0 and 4 inches.
The 'Group Indent' setting only affects the display of the report. If you enter a value other than zero (0) the various levels of hierarchy will appear indented when the report is previewed. Thus making it easier to see the various groups of employees, managers, etc.
For more information, search the online help for 'Grouping data hierarchically'.
Regards
Girish

Error while executing a report from Planning

Hi,
I've got this error message when I execute a report from Hyperion Planning (web) :
"5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
Can you help me please ?
Thanks.
Virgile.

I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
restart the BI+ reporting services and then try to run the reports!

Navigate report from detils level in hierarchy

Similar Messages

Maybe you are looking for