Navigate to other page without using task flow

Hi.,
I m using jdeveloper 11.1.1.5
I had created a Following jspx pages
=>glm0101.jspx
=>cfs0010.jspx
=>generalledger.jspx
=>glm2080.jspx
=>login.jspx
I need to create following
GLm ----> While user clicks this it should navigate to glm0101.jspx
CFS ----> While user clicks this it should navigate to cfs0010.jspx
GeneralLedger ----> user clicks this it should navigate to generalledger.jspx
Querry -----> user clicks this it should navigate to glm2080.jspx
could anyone help me to provide the solution without using the task flow

I had used The following procedure
In adfc config i had created a unbound task flow as given below
http://www.4shared.com/photo/BFcI1zVp/E024.html
I had draged and dropped ADF:Link and anmed it as General Ledger
In its action i wrote gl [which i had specified in TaskFlow]
When i click this i am getting this error
oracle.adf.controller.activity.ActivityLogicException: ADFC-02013: The ADF Controller cannot find metadata for activity 'GeneralLedger'.
     at oracle.adfinternal.controller.util.Utils.createAndLogActivityLogicException(Utils.java:230)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:928)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:778)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:552)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:148)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:109)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:78)
     at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:43)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:788)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:306)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)and also i m getting error as
<ViewXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ViewXmlImpl> <parse> ADFc: Failed to find/parse page name for view activity.
<ActivityXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ActivityXmlImpl> <parse> ADFc: Activity metadata could not be parsed. [Activity Type, ID] = ['view', 'Cfs0010'].
<ViewXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ViewXmlImpl> <parse> ADFc: Failed to find/parse page name for view activity.
<ActivityXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ActivityXmlImpl> <parse> ADFc: Activity metadata could not be parsed. [Activity Type, ID] = ['view', 'GeneralLedger'].
<ViewXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ViewXmlImpl> <parse> ADFc: Failed to find/parse page name for view activity.
<ActivityXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ActivityXmlImpl> <parse> ADFc: Activity metadata could not be parsed. [Activity Type, ID] = ['view', 'GLM0101'].
<ViewXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ViewXmlImpl> <parse> ADFc: Failed to find/parse page name for view activity.
<ActivityXmlImpl> <parse> ADFc: /WEB-INF/adfc-config.xml:
<ActivityXmlImpl> <parse> ADFc: Activity metadata could not be parsed. [Activity Type, ID] = ['view', 'Glm2080'].

Similar Messages

  • Using Task Flow in the template page

    Dear all,
    I am beginer and I work with JDev 11.1.1.3.0
    In my application I've got a template page called 'templateDef1.jspx'. In this page on the top facet I've got two commands link: 'Asort' and 'Reports'.
    I've created a new JSF page called 'main.jspx' which is based on the templateDef1 and in the center facet I dropped an ADF Bounded Task Flow as a Region. This bounded task flow contains two pages ('asort.jsff' and 'report.jsff'). When I run the main.jspx page I can navigate from 'asort' to 'report' page fragment using the button inside the page fragments.
    Now I want to navigate to those page fragments using the commands link from 'templateDef1.jspx'. What should I do ?
    I've tried several things but nothing works.
    Any help will be appreciated.
    Regards,
    Wojtek.
    Edited by: kojot on 2011-01-13 03:55

    Thank you a lot for you replies.
    Amit, I tried your solution but something doesn't work. I think the parameter isn't passing into the task flow.
    In my template page, after I added <af:setActionListener> I got two warnings: Reference "PageFlowScope.Flow" not found.
    The ref Center facet is refreshing properly, but it always displays the assort.jsff, because it is marked as default activity in my task flow.
    Here is the fragment of code of template page:
    <af:commandLink id="clAsort">
                      <af:panelGroupLayout id="pt_pgl2" halign="center"
                                           valign="middle" layout="vertical">
                        <af:image source="/ikony/asortyment.jpg" id="pt_i1"
                                  shortDesc="Asortyment"/>
                        <af:outputLabel value="Asortyment" id="pt_ol1"
                                        inlineStyle="color:Blue;"/>
                      </af:panelGroupLayout>
                      <af:setActionListener from="#{'A'}"
                                            to="#{pageFlowScope.Flow}"/>
                    </af:commandLink>
                    <af:spacer width="30" height="10" id="pt_s1"/>
                    <af:commandLink id="clReport">
                      <af:panelGroupLayout id="pt_pgl3" halign="center"
                                           valign="middle" layout="vertical">
                        <af:image source="/ikony/raporty.jpg" shortDesc="Raporty"
                                  id="pt_i2"/>
                        <af:outputLabel value="Raporty" id="pt_ol2"
                                        inlineStyle="color:Blue;"/>
                      </af:panelGroupLayout>
                      <af:setActionListener from="#{'R'}"
                                            to="#{pageFlowScope.Flow}"/>
                    </af:commandLink>And the code of the whole task flow definition:
    <?xml version="1.0" encoding="windows-1250" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
      <task-flow-definition id="page-frag-task-flow">
        <default-activity id="__1">asort</default-activity>
        <data-control-scope id="__24">
          <shared/>
        </data-control-scope>
        <input-parameter-definition id="__12">
          <name id="__13">Flow</name>
          <value>#{pageFlowScope.Flow}</value>
          <class>java.lang.String</class>
        </input-parameter-definition>
        <view id="asort">
          <page>/fragments/asort.jsff</page>
        </view>
        <view id="raport">
          <page>/fragments/raport.jsff</page>
        </view>
        <router id="router1">
          <case>
            <expression>#{pageFlowScope.Flow == 'A'}</expression>
            <outcome id="__18">asortView</outcome>
          </case>
          <case>
            <expression>#{pageFlowScope.Flow == 'R'}</expression>
            <outcome id="__23">raportView</outcome>
          </case>
          <default-outcome>raportView</default-outcome>
        </router>
        <control-flow-rule id="__2">
          <from-activity-id id="__3">asort</from-activity-id>
          <control-flow-case id="__4">
            <from-outcome id="__6">viewRaport</from-outcome>
            <to-activity-id id="__5">raport</to-activity-id>
          </control-flow-case>
        </control-flow-rule>
        <control-flow-rule id="__7">
          <from-activity-id id="__8">raport</from-activity-id>
          <control-flow-case id="__10">
            <from-outcome id="__11">viewAsort</from-outcome>
            <to-activity-id id="__9">asort</to-activity-id>
          </control-flow-case>
        </control-flow-rule>
        <control-flow-rule id="__14">
          <from-activity-id id="__15">router1</from-activity-id>
          <control-flow-case id="__17">
            <from-outcome id="__19">asortView</from-outcome>
            <to-activity-id id="__16">asort</to-activity-id>
          </control-flow-case>
          <control-flow-case id="__20">
            <from-outcome id="__22">raportView</from-outcome>
            <to-activity-id id="__21">raport</to-activity-id>
          </control-flow-case>
        </control-flow-rule>
        <use-page-fragments/>
      </task-flow-definition>
    </adfc-config>In main.jspx page, after I dropped the task flow as region, I left the parametersMap blank and I set the value to the parameter Flow as #{pageFlowScope.Flow}. Am I doing it right ? I have to missed something becuase it doesn't work.
    I also read ADF Handbook and some blogs to get know how to pass parameters into bounded task flow, but I couldn't solve my problem.
    Regards,
    Wojtek.

  • Use task flow or simple pages in CRUD?

    Hello,
    using JDeveloper 12c.
    In my case I use task flow to create a simple CRUD, i have two task flow, for it in the first I have a employees table and a button to create a new employee, the button has an action to go to another task flow where I have a Method call of CreateInsert which in turn go a view activity that has a form to create an employee.
    The problem is, when committing task makes a return to the main flow but the table not refreshes with the new employee, every task flow isolated handled transactions.
    I recommend, work the CRUD with task flow or single pages?
    thank you very much in advance.

    thank you very much, I got the exact answer, thank you very much again.

  • ADF Task Flow: Using Task Flow Call as Application Entry Point

    In our product we have a task flow structure very similar to the Fusion Order Demo application, but we are having serious trouble reproducing the documented functionality of ADF Task Flows.
    Specifically, we cannot use a task flow call as an entry point for our application, which is very important for us to achieve.
    The [Developer s Guide|http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/taskflows.htm#ADFFD1634] states about the [demo application|http://www.oracle.com/technology/products/jdev/samples/fod/index.html] :
    "A Fusion web application always contains an ADF unbounded task flow, which contains the entry point or points to the application. Figure 14-3 displays the diagram for the unbounded task flow from the Fusion Order Demo Application. This task flow contains the Home, *MyOrders*, *checkout*, registerUser, and updateUserInfo *view activities, which are all entry points to the application*."
    "The checkout-task-flow activity in Figure 14-3 is a call to an ADF bounded task flow."
    When we run the Fusion Demo Application, we are only able to use home, updateUserInfo and register as entry points.
    We cannot enter the application through any of the task flow call activities (MyOrders and checkout) as the documentation suggests.
    What are the reasons for this and how do we fix it, so we can use task flow call activities as application entry points?
    Thanks.
    Edited by: Rune Glerup on Oct 9, 2009 2:51 AM
    The forum did not display the link to "Developer's Guide" because the link contained the single quote char '. Single quote char removed.

    Is what you mention here the case in the Fusion Order Demo application?
    If the task flow call activities cannot be used as entry points, why is it stated in the documentation?
    How do we solve this, so that the task flow call activities (including parameter bindings) can be used as entry points, like the documentation suggests?

  • Forward to JSP page without using Navigation Model

    How can I forward to a JSP page without using the Navigation Model?

    It's done in the cardemo example in
    ImageMapEventHandler.processAction() Is there a reason
    for it there?Ah ... that makes sense.
    That code in CarDemo was written before there was such a thing as a NavigationHandler, and we didn't have time to update it to the new approach before the EA4 release. That'll be changed before the next one. In the mean time, I'd recommend that you use the navigation rules mechanism where it works for you, because it encourages good separation of business logic and presentation logic that will lead to more maintainable applications.
    Craig

  • Cannot see entire page without using the bottom scroll bar.

    Cannot see the entire page without using the bottom scroll bar. Unfortunately some websites do not have the scroll bar and I am unable to complete my transaction because the area I need to click is on the right of the screen and that does not show on my page. If I change the view, the font is to small and it is blurry making in illegible.

    Weird. Be sure zoom is to default value (press Ctrl+0 -zero- in FF). In addition, restart FF in safe mode, maybe an add-on is the culprit.

  • Firefox not displaying buttons and boxes when allow other pages to use their fonts instead of my selection is selected

    Firefox not displaying buttons and boxes when allow other pages to use their fonts instead of my selection is not selected. The irritating thing is that Firefox used to display pages until FF 31. Please fix this
    Thanks
    Randy

    The missing icons are supplied by a font that is downloaded from the server (@font-face) as you can probably see by little boxes that show the hex code of the characters.
    You will have to make sure that you allow pages to choose their own fonts to see such an icon font.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

  • Problem with back button when using task flow to navigate through pages

    I am using unbounded task flow to navigate through my pages
    in page2 I added back button so I can back to page1 using the action A2
    task flow 1
    page 1 -----A1-------> page 2
    page2 ----A2--------> page1
    the problem when I used page2 in another task flow
    task flow 2
    page 3 -----A3------> page2
    page 2 -----A4 -----> page3
    here when I click on back button he take me to page1
    how can I back to page3 ???????

    For this you have to know where the user came from when he navigated to page2. You can e.g. store the back target in a variable in the session or pageflow scope (when the user navigates from page1 or page3 to page2), then you bind the back button of page 2 to the stored variable.
    Timo

  • Two pages reuse a task flow -------how to reinitialize the task flow?

    Hi, i get a question.
    In general:
    In the navigation menu i have two commandlink that are "Service" and "Application". And when i click on each of the two command links, i go to a page.
    The detail:
    This two commandlinks use a same task flow-----that is : <af:commandNavigationItem...... definition of this two link' action attributes are just the same.
    What's more, the pages that i go to when i click on the link also use the same one, just show something different bansed on the paramaters when alick on the link. The parameters are defined in the <af:commandNavigationItem...... using <af:setPropertyListener..
    And the question is:
    when i click on the "Service" link and see the "Add service" page and then click "Application" it's still the "Add service" page, and otherwise is the same. i just can not jump freely through this tow link.
    I have debuged the code and find that, once i click "Service" link then i click "Application" link, the task flow won't reinitialize.
    Any one has some solutions?
    Thanks in advance.

    Reading the official doc will help.
    http://docs.oracle.com/cd/E15523_01/web.1111/b31974/taskflows_complex.htm#BABHIAAI

  • How to use task flow's transaction options with session's user data

    Hi.
    I have custom extension of ApplicationModuleImpl class:
    package test.model
    imports...
    public class CustomAppModuleImpl extends ApplicationModuleImpl {
        public static final String SESSION_VAR = "MySessionVar";
        public CustomAppModuleImpl() {
            super();
        @Override
        protected void prepareSession(Session session) {
            super.prepareSession(session);
            System.out.println("######## " + this.getClass().getName() + ".prepareSession() called.  AM isRoot() = " + isRoot());
            Hashtable userData = session.getUserData();
            if (userData == null) {
                userData = new Hashtable();
            userData.put(SESSION_VAR, "Useless");
        @Override
        protected void create() {
            super.create();
            System.out.println("######## " + this.getClass().getName() + ".prepareSession() called.  AM isRoot() = " + isRoot());
    }Inside userData I store some useful session-based values (here is just an example ;) ).
    Within Model.jpr I defined that every Application Module I create must extends this CustomAppModuleImpl :
       <value n="oracle.jbo.extends.appModule" v="test.model.CustomAppModuleImpl"/>
    ...I have one AM with one view:
    package test.model;
    import oracle.jbo.server.ViewObjectImpl;
    // ---    File generated by Oracle ADF Business Components Design Time.
    // ---    Wed Mar 07 20:22:11 CET 2012
    // ---    Custom code may be added to this class.
    // ---    Warning: Do not modify method signatures of generated methods.
    public class AppModule1Impl extends CustomAppModuleImpl {
         * This is the default constructor (do not remove).
        public AppModule1Impl() {
         * Container's getter for EmployeesView1.
         * @return EmployeesView1
        public ViewObjectImpl getEmployeesView1() {
            return (ViewObjectImpl)findViewObject("EmployeesView1");
    }Now I have BTF (bounded task flow, with default properties) and I call that task flow on a button press. With default properties ( Transaction: <No Controller Transaction> ) I get preferred values from session's userData within Entity Object.
    Code snippet inside that entity implementation looks like:
            DBTransaction dbt = getDBTransaction();
            System.out.println(getClass().getName() + " entity lives AM: " + dbt.getRootApplicationModule().getClass().getName());
            if (dbt.getSession().getUserData() == null) {
                System.out.println(CustomAppModuleImpl.SESSION_VAR + " -> NULL");
            } else {
                System.out.println(CustomAppModuleImpl.SESSION_VAR + " -> " + dbt.getSession().getUserData().get(CustomAppModuleImpl.SESSION_VAR));
    ...And as I mentioned output is correct:
    test.model.EmployeesImpl entity lives AM: test.model.AppModule1Impl
    MySessionVar -> UselessNow the trickiest part. As soon as I change property of called task flow Transaction to something else that +<No Controller Transaction>+, e.g. Always Begin New Transaction, code snippet from task-flow.xml :
        <transaction>
          <new-transaction/>
        </transaction>
    ..This session stuff begin to act unpredictably. Session's userData is now null. And Output looks like:
    test.model.EmployeesImpl entity lives AM: oracle.jbo.server.ApplicationModuleImpl
    MySessionVar -> NULLWhy in the world ADF uses oracle.jbo.server.ApplicationModuleImpl instead of test.model.AppModule1Impl or at least my defined test.model.CustomAppModuleImpl ?!?
    Is this a bug? Or maybe a feature?
    10x
    Regards

    Hi,
    Why in the world ADF uses oracle.jbo.server.ApplicationModuleImpl instead of test.model.AppModule1Impl or at least my defined test.model.CustomAppModuleImpl ?!?
    Is this a bug? Or maybe a feature?
    ADF BC alwyas has a transaction opened even if the ADFc setting is No Transaction. So if you explicitly ask for a new transaction I assume that the ADF BC data control creates a new transaction without re-executing your AM initialization codes. Looks as if it uses an internal AM instance for this just to hold the transaction. However, worth filing this as a bug - assuming you reproduced this with a later version of either JDeveloper 11g R1 or R2
    Frank

  • Region not refreshing while reentry in task flow using task flow return

    Hi,
    Use Case :
    1) I have a task flow TF1 displayed as a region in page fragment Page1. Task flow has certain input parameters. It displays a data in table which is surrounded by Panel Box which is expanded if certain input parameters are set otherwise disclosed
    2) From Parents screen we have a button , on click of that button I am navigating to a different task flow TF2 , adding some data and coming back to screen Page1 through task flow return activity.
    3) Task flow TF1 should be refreshed with new data which is being set on through a bean variable.
    Task flow TF1 is not being refreshed. (I have tried setting the refresh property to 'If Needed')
    Please Suggest.
    Best regards,
    Anu

    Hi,
    Thanks for the response. Query is being execute in the backend. But region is not being refreshed even after change of parameter.
    Best regards,
    Anuradha

  • Use Task Flow Parameter as value to View query?

    I'm not sure if I have all the terminology exactly correct, but basically I have a task flow that allows the user to edit data in a table. I want to open that task flow, pass a parameter from another task flow, and use that parameter to determine the row which I want to edit. A fairly typical use case I would imagine.
    I can get the calling task flow to call the other task flow, but I cannot seem to determine what to set the value of the parameter in the called task flow to so that it executes the query and populates the page with the data from the row specified by that parameter.
    What is the best practice for this type of use case?

    duplicate: Re: Task flow parameter not available to set method call parameter

  • Creation of custom page without using NetWeaver Developer Studio

    Hi Experts,
    In my project, we have not installed NetWeaver Developer Studio. We are using EP 7.0.
    We have to create a custom page for the project. In this page, we have to provide seperate iViews links.
    The page should look like this:
    iView 1 - Link                iView 2 - Link        iView 1 - Link
    Help iView 1-Link        Help iView 1-Link     Help iView1-Link
    I tried to do so by creating a page. In the page, I tried to use 'Three Coloumn Page' layout. The iviews are getting displayed in following way:
    iView 1 (iView is getting displayed .Link not getting displayed)
    Help iView 1 (iView is getting displayed .Link not getting displayed)
    iView 2(iView is getting displayed .Link not getting displayed)
    I can not display link of all six iViews. Further more iViews are getting displayed in one coloumn and 3 rows. I can see the iViews directly. I am not able to display links for iViews.
    I need 3 coloumns and 2 rows layout.
    Can you please let me know how to achieve this?
    Whether I have to create new layout? For this whether we will need NetWeaver Developer Studio?
    Can we do it by creating HTML page. In the HTML page, we will have many links. These links will point to the iViews stored in SAP EP's KM. If so, what be the steps?
    I know that it can be done by creating a PAR file and deploying it. But, we don't have Netweaver Developer Studio.
    Can we acheive above without using NetWeaver Developer Studio?
    Please help me.
    Regards,
    Brian

    Hi Kedar,
    Thanks. My requirement is that six iViews links should be shown in the portal content area.
    The iViews links should be like
    iView 1-Link         iView 2-Link           iView 3-Link
    Help iView 1-Link Help iView 2-Link    Help iView3-Link
    When user will click on any iView link, the relevant iView should be displayed.  The iView can be displayed in seperate new page. So naturally five iView link will not be displayed.
    I am planning to create one HTML page and store it in KM. I will call this page in portal content area.
    There will be hyperlink on this HTML page. The hyper link will be attached to other iView links in  KM.
    Whenever user will click on any Help link or iView link the corresponding iView will be called from  KM.
    So in KM we will store 7 objects. 3 HTMLpages for help. 1 HTML page for main page.
    Other 3 will point to iView-Link1, iView-Link2 and iView-Link3.
    Can I do so? Will it sort out my problem?
    Thanks

  • How do I change the colour of a page in Pages without using a floating shape or text box?

    I want to change the colour of a page in Pages without having to stretch out a floating coloured shape or using a text box to write the text in. I have been stretching shapes and using text boxes for years but surely there is an simpler and more elegant way to do this? Plus, I want to be able to type several pages of continuous text and not have to split the text up into multiple text boxes. Any help most welcome.

    bigj wrote:
    I want to change the colour of a page in Pages without having to stretch out a floating coloured shape or using a text box to write the text in. I have been stretching shapes and using text boxes for years but surely there is an simpler and more elegant way to do this?
    There are a whole lot more really essential features missing in Pages than this.
    bigj wrote:
    Plus, I want to be able to type several pages of continuous text and not have to split the text up into multiple text boxes. Any help most welcome.
    What is stopping you?
    Peter

  • HFM Consolidations using Task Flow Automation

    I have created a task flow that has 5 stages (each stage having a success and a fail link). The first stage is set to consolidate (Impacted) our Actuals scenario for 6 years for 3 entity trees). The 2nd stage consolidates a different scenario for 3 yrs for 3 trees, etc. The task flow seems to "stop" in Stage 1 after consolidating all 3 trees for a few years. If I look in the View Taskflow status, the task flow still shows as being active; however if I look under Running Tasks, it shows nothing is running. If I look under Task Audit, it shows the last consolidation finished. I run into this same problem both when I schedule the task flow and when I run it manually. It consolidates a few years and then stops (and it's still in the first stage). I looked in the Event log on the HFM server and don't see anything that looks suspicious. Has anyone else had this problem?
    Also one more question - when I go to automate the task flow, why does the server time stamp listed there not match the clock on the server? I'm remoted into the server and the clock on the task bar says 9am, but the Server Date showing on the Starting Event tab shows 8am.
    Thanks.
    Terri

    I just got back to looking at this today. I ran the task flow to consolidate 2004-2009 actuals for 3 trees for all 12 months. All 3 trees were consolidated for 2004. Two trees were consolidated for 2005 and then it stopped. Both 2004 and 2005 are in the same stage of the task flow, so if the settings were correct for 2004, they should be fine for 2005. If I look at the task audit screen, it shows that it started consolidating the 2nd tree of 2005 at 8:32am. It then shows my id logging off at 8:33am and that the consolidation finished at 8:38am. Then it shows my id logging off again at 8:47am. The task flow is set up so that my id logs in for the 1st stage and then the following stages are set to use Initiator ... but the flow isn't getting to the 2nd stage be/c it dies.
    If I view the status of my task flow, it still shows as being active. I don't understand why the task audit shows my id as logging off be/c I still have the same 2 HFM sessions running as I did when I initiated the task flow ... unless it's the session that starts up to run the task flow that's getting logged off ... but if it is, I don't know why. Would the auto-logoff after so many minutes of inactivity cause this? Maybe that session appears inactive even though it's waiting for the task flow to do it's thing.
    1:07pm Follow-up - After the task flow hung this morning, I manually stopped it. I then kicked off the same task flow again and it completed successfully about 4 hours later ... so it doesn't seem to be due to the auto-logoff (time out) setting.
    Terri
    Edited by: Terri T on Apr 20, 2009 10:07 AM

Maybe you are looking for