Navigate to web page pivot table

Hi All,
I found a strange behavior. I am trying to pass the parameters through navigation to web page using the following concept.I am trying to pass two parameters instead of one. The two parameters are passed only when the report is in normal table form. If i create the pivot table , only one parameter is passed, the remaining value shows null. Is this a bug in obiee 11g?
http://prasadmadhasi.com/2011/12/15/hierarchicalnavigationinobiee11g/#comment-321
Thanks,
Virat

Did you check to have the results to be 'embedded in section' in your dashboard section properties?
kris

Similar Messages

  • Navigate to Web Page always opens a new window

    Hi,
    I am using action link "Navigate to Web Page" for column interaction. The source report is in a dashboard page and by clicking on this column should navigate to another dashboard page carrying some parameters.
    It works fine but everytime it opens a new browser window for navigation. But my requirement is to make this navigation happen in the same browser window. Can anyone please help me with a solution on this?
    My version of OBIEE is 11g.
    The URL I am passing looks like this: http://localhost:9704/analytics/saw.dll?Go&Path=/Shared/Test/target&Action=Navigate&col1=@{1}&val1=%22@{2}%22&op1=@{3}
    Thanks
    Mano
    Edited by: 820723 on Jan 24, 2011 9:54 PM
    Edited by: 820723 on Jan 24, 2011 9:54 PM

    Did you check to have the results to be 'embedded in section' in your dashboard section properties?
    kris

  • I was referred to this site because Internet Explorer would not allow me to navigate to web page. Therefore the tech-support staff sugested I try your site to get to the web page

    upon logging into this program open road x3 from the site realeflow.com. I get a msg "navigation to web page has been canceled" so I contacted the tech-support staff. They informed me that in the past this problem has occurred with internet explorer, so they referred your site to me, as a option to get into the web page from their site. I have never used your site to get into a web page before. So I do not exactly know how this works??????????

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection setting here: Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select No Proxy
    Another possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that,.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Safari will not navigate Apples Web pages.

    I am trying to use Safari in Apples support pages. I cannot left click any links, nothing happens. (Right click to load new page/tab works fine)
    When I navigate to another web site everything is fine. Had to use another browser to access support pages. (and this page)
    I have everything updated to current versions (OSX, Safari etc...)
    Has anybody experienced the same? Is this a problem on my side or is an Apple issue?
    BB

    Do you have any extensions or add-ons for Safari?
    What plug-ins are you using?
    Does this happen for another user, e.g., Guest user?
    Does this happen when Starting up in Safe Mode?

  • I cannot sign in to secure sites or navigate around web pages.

    I cannot use some sites because I am unable to navigate around the site also at mytricare.com I am unable to sign in to the secure site. I check with Tricare for help
    . They were unable to solve the problem & suggested that it was a problem w/some of my Firefox settings

    Well, disregard.  After an hour of attempting to log in, changing password on desktop, and still having problems logging in to phone, it now lets me log in.  Thanks.

  • Unable to group with page breaks when creating pivot table in BIP

    Hi,
    I'm using BIP 10.1.3.4 and I need some assistance with report with pivot tables. I used the wizard to successfully create the pivot table but i need to add a group and break the page on that group. Is there any way i can do this?
    Thanks.

    HI Bala,
    I am Durgaprasad from Pune-INDIA, working as a OBIEE developer, I have one query which I mentioned below can you please go threw it.
    I have done migration Discoverer Admin EUL Layer into OBIEE repository using below methodology.
    Navigate to the <installdrive>\OracleBI\server\Bin directory. There are two important files in this directory: the migration assistant executable file named MigrateEUL.exe and a properties configuration file named MigrationConfig.properties.
    Could you please help me how to migrate discoverer plus workbooks and worksheets into OBIEE Answers?
    go through below link, It will show navigation steps for migrating of EUL from Discoverer to OBIEE.But i need migration of workbooks and worksheets from Discoverer into OBIEE Answers.
    http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/discomigration/migrate_disco_biee.htm
    This is very great full help to me …
    Advance thanks for your suggestions.
    Regards
    Duraga Prasad.

  • Maximum number of allowed pages in Pivot Table

    Hi All,
    We are in OBIEE 10g and I am facing following error in a dashboard -
    Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000).
    Error Details Error Codes: UN2FNAHV 
    My instanceconfig.xml has following details -
    WebConfig>
    <ServerInstance>
       <DSN>AnalyticsWeb</DSN>
       <CatalogPath>E:/OBIEE/OracleBIData/web/catalog/PlngAnalytics</CatalogPath>
       <PivotView>
        <MaxCells>20000</MaxCells>
        <maxvisiblecolumns>20000</maxvisiblecolumns>
        <maxvisiblepages>10000</maxvisiblepages>
        <maxvisiblerows>50000</maxvisiblerows>
        <maxvisiblesections>10000</maxvisiblesections>
       </PivotView>
        <CubeMaxRecords> 10000000 </CubeMaxRecords>
        <CubeMaxPopulatedCells> 10000000 </CubeMaxPopulatedCells>
       <Alerts>
          <ScheduleServer>APPC-tst</ScheduleServer>
       </Alerts>
    Where is this limit set? Appreciate help on this please.

    Try limiting the result set or upgrade the [MaxVisiblePages]
    Check John's blog:-
    http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    Restart the services once it is done.
    Mark if helps,
    Thanks,

  • How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

    Hi Everyone,
    Iam stuck with 1 problem please can any 1 help me if u know the solution.
    Here is my problem:
    How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
    For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
    And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

    Thanks Nikhil. But I am fetching the values from the LOVCache.java.
    I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
    I mean to say can I write
    unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
    where LOVCache.entityTypeSelectionList is used to populate the drop down box.
    Regards,
    Aseet

  • How use "All Values" in the pages of pivot tables

    Hi everyone,
    I’m using Oracle Bi Answers and I have the following problem:
    I’m doing reports based in a datamart with 2 fact table each with about 28 Million records per month and with a medium of 14 dimensions.
    The users want to have the choice to select 5 parameters for example (region, district, type of product, month of analysis, subtype of product) where they can select an individual option as well as select an “all values” option. They want this for all the parameters.
    We are having problems doing this without having the report to timeout.
    Approaches used
    We are trying to do this by using pivot tables and combo boxes in the reports (one for each parameter). The combos are in the pages area.
    We are trying to do a calculated item with Sum(*) to have a “ALL Values” in the combo box but this makes the report extremely slow.
    We also tried to do Sum in the pages section of the pivot table but it only displays the “All pages value” of the first combo box.
    So actually I don’t know what to try. Can you help me with the best way to do this?
    Thanks
    Edited by: user8727081 on Sep 28, 2009 2:45 AM

    Hi,
    I had the same problem, and I solved it using the dashboard prompts.
    But sometimes users are not happy. I explaine why.
    Suppose a dimension Nation:
    Italy, Germany, UK, France, USA
    1) I create a report with sales quantity.
    2) Report has a filter --> "nation" = is prompted
    3) I create a dashboard prompt "Nations" based on dimension Nation with All Values
    4) I publish the report in a dashboard with the dashboard prompt "Nations"
    When user choose the nation from the prompt, all nations are displayed, also if I have NO sales for some of these.
    My goal: only nations with sales must be shown
    Thanks
    Enrico

  • Pivot Table page-item as a multi select

    Can this be done? When placign an item in the "page" shelf of the pivot table, the default is to allow a single valeu selection, but can we allow multiple selections.
    For instance, if I place region in the Page item area, can I allow the user to select "West" and "East" as opposed to just 1 distinct value?

    Why not just use a prompt with a multiselect box then?
    It looks the same for the end user, only now he have to wait when he chooses another combo... in stead of that he had to wait only in the beginning something longer

  • Can we create a pivot table of Excel in a JSP page using POI

    Hello,
    I want to know whether we can create a pivot table of excel sheet in a jsp page using POI package from apache.
    thank you.

    Hi Alex,
    Many thanks for replying.
    I followed the link, but unable to get correct output.. I have shared the template earlier. I can share the template once again.
    It would be grateful if you give me share the working template with table of content.

  • The data from my web page insert in SQL table as question marks

    I use Farsi language in my web page for inserting customer data. The data that is inserted in webpage and submitted, showed as ???? in SQL table. A lot of developers say that I should use N' before the Unicode character, but I don't know how I can use it
    in my code. I attached the code. Can someone say me where I should insert the N in my code?
    protected void cmdInsert_Click(object sender, EventArgs e)
    //Checking the validation of required fields
    if (cboCustomerType.Text == "" || cboTitle.Text == "" || SearchableName.Text == "" ||
    FinalName.Text == "" || NationalID.Text == "" || BusinessID.Text == "" || MobilePhone.Text == "")
    lblStatus.Text = "لطفا فیلدهای اجباری را حتما پر کنید";
    return;
    //define ADO.NET objects.
    string insertSQL;
    insertSQL = "INSERT INTO Customers(";
    insertSQL += "CustomerType,CustomerTitle,CustomerFirstName,CustomerLastName,CompanyType,";
    insertSQL += "CompanyName,SearchableName,FinalName,NationalCode,BusinessID,City,Address,PostalCode,";
    insertSQL += "Zone,MobileNumber,WorkPhone1,WorkPhone2,HomePhone,FaxNumber,Email,Website,Note)";
    insertSQL += "VALUES('";
    insertSQL += cboCustomerType.Text + "','";
    insertSQL += cboTitle.Text + "','";
    insertSQL += CustomerFirstName.Text + "','";
    insertSQL += CustomerLastName.Text + "','";
    insertSQL += cboCompanyType.Text + "','";
    insertSQL += CompanyName.Text + "','";
    insertSQL += SearchableName.Text + "','";
    insertSQL += FinalName.Text + "','";
    insertSQL += NationalID.Text + "','";
    insertSQL += BusinessID.Text + "','";
    insertSQL += City.Text + "','";
    insertSQL += Address.Text + "','";
    insertSQL += PostalCode.Text + "','";
    insertSQL += Zone.Text + "','";
    insertSQL += MobilePhone.Text + "','";
    insertSQL += Phone1.Text + "','";
    insertSQL += Phone2.Text + "','";
    insertSQL += HomePhone.Text + "','";
    insertSQL += FaxNumber.Text + "','";
    insertSQL += Email.Text + "','";
    insertSQL += Website.Text + "','";
    insertSQL += Note.Text + "')";
    SqlConnection con = new SqlConnection(connectionString);
    SqlCommand cmd = new SqlCommand(insertSQL, con);
    //try to open the database and execute the insert
    int added = 0;
    try
    con.Open();
    added = cmd.ExecuteNonQuery();
    lblStatus.Text = added.ToString() + "اضافه شد";
    catch (Exception err)
    lblStatus.Text = "Error inserting record.";
    lblStatus.Text += err.Message;
    finally
    con.Close();
    //If the insert succeed, refresh the customer list.
    if (added > 0)
    FillCustomerList();
    Regards,

    Because you're composing the SQL statement with string concatenation, you would put the "N" before the single quote,
    VALUES(N'";
                insertSQL += cboCustomerType.Text + "',N'";
                insertSQL += cboTitle.Text + "',N'"; // ...etc
    However, composing SQL statements with string concatenation is not a suggested practice because it's open to SQL injection (see:
    https://technet.microsoft.com/en-us/library/ms161953(v=sql.105).aspx). A safer way to do this is to use command parameters to represent the values (see SqlCommand.Parameters
    property). If you use parameters, you can specify parameter data type as SqlDbType.NVarchar, which will ensure your text values are passed in as Unicode. Also ensure that the columns in question are defined in the database table definition as Unicode (NVARCHAR
    rather than VARCHAR).
    Hope this helps, Bob

  • Maximum number of allowed pages in Pivot Table exceeded

    Hi,
    I am working on Oracle Business Intelligence 10.1.3.2.1 . We have a requirement to show one report in the Pivot layout.
    But it throws one error: "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000) "
    So I have modified the Instanceconfig.xml with the following piece of code:
    <PivotView>
         <MaxVisibleColumns>9000</MaxVisibleColumns>     
         <MaxVisiblePages>90000</MaxVisiblePages>
         <MaxVisibleRows>9000000</MaxVisibleRows>
         <MaxVisibleSections>9000000</MaxVisibleSections>
         <ResultRowLimit>9000000</ResultRowLimit>
    </PivotView>
    <CubeMaxRecords>9000000</CubeMaxRecords>
    <CubeMaxPopulatedCells>9000000</CubeMaxPopulatedCells>
    The number of records is 30 398. In another report the amount is much higher than this number of records and bring it with no problem.
    Can anyone please look into this Issue.

    Hi
    Try checking the link
    http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    Hope this helps
    Regards
    Debo

  • Maximum number of allowed pages in Pivot Table exceeded Configured Limit:

    When trying to create Calculated Item on Pivot table Page section Item like Division dim the calculated item is 'All' -> sum * and Customer again the calculated item is 'All -> sum * . it performs the first calculation (for division) but in the next one it gives the error
    "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000)."

    Try limiting the resultset or upgrade the [MaxVisiblePages]
    see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    regards
    John
    http://obiee101.blogspot.com

  • I am creating an I-Web webpage.  When I add pages, the only way to navigate throught the pages is with the menu bar on the left.  How do I navigate to each page on the actual website?

    I am creating a website using i-web.  When I add pages, they appear at the top of the webpage, but I cannot navigate to each page in the navigation bar.  I can only navigate in the menu bar located on the left side of the program.
    How do I navigate thru the website?

    You don't unfortunately, iWeb though great does not allow that funtion.
    If it is a deal breaker for you I would suggest SandVox or RapidWeaver.
    I personal like SandVox
    How ever my website is WordPress, you have to understand a little code, but a lot more freedom
    LearnFromLee
    I may receive some form of compensation, financial or otherwise, from my recommendation or link. <Edited by Host>

Maybe you are looking for