Navigate with a file with magic trackpad

i am trying to move a file, a folder with songs to itunes, until now my itunes was always on full screen since lion
so what i was doing was to press the folder and than swipe with 3 fingers to itunes and drop the folder there
i was able do to so and go to misson control, now while i am pressing and trying to move its not let me
now while i am holding the folder or any file and i want to move to misson cotrol or swipe between fullscreen apps i can't
it was be able to navigate with the file to where i want to move him while pressing on him
the option was able and since 10.7.2 update i cant
thank you

These will occasionally show up when updating a system and repairing a drive in Disk Utility. You can remove it safely if it doesn't contain anything familiar to you.

Similar Messages

Back functionality in Safari broken with 9.1 with Magic Trackpad?

Mavericks 10.9.1 update appears to have broken the use of Safari 'back' gesture, but only for standalone Magic Trackpad users? Trying to swipe with two fingers from left to right to go back simply moves the front browser pane a few mm's then stops. You can no longer interact with the page, and have to either close and reopen safari, or pop open the MBP and use the onboard trackpad, in which case you can continue the gesture through to completion, then go back to using the standalone trackpad. It's as tho with Magic Trackpad it gets stuck just after the gesture/back animation begins.
Anyone else seeing this or just me?

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.
2. There are reports that this problem can be solved by simply restarting, or by resetting the PRAM.

Problem with Magic TrackPad and Macbook Pro

I just bought the Apple Wireless Keyboard and Apple Magic TrackPad for my home desktop setup. I connect my Macbook Pro 13" (from august 2010) to a Dell U2410 screen.
Everything works perfectly for a while, but then the cursor starts jumping around on the screen when I use the Magic TrackPad. Now here comes the weird thing, if I open the lid on the Macbook just a few inches the jumping stops completely and the Magic TrackPad works perfectly again.
I have tried googling a bit and browsed these forums also - no luck finding a solution.
I have also tried connecting a USB mouse to the Macbook when the cursor started to jump around - no problem with the USB mouse. I have also tried a different Magic TrackPad that my friend also just have bought for his setup - same problem after a short time.
Everything is updated to the latest software and firmware.
Thank you in advance for your help.

I have the same problem with a Trackpad paired with a new Mac Mini just purchased in September. After a while, my trackpad also starts to exhibit behavior similar to those described by Hecro. The trackpad cursor feels frozen, or else it jumps around, often trying to stay away from or jump over any hyperlink in either text or graphic form on the page I am viewing.
I find that if I pick up the trackpad and hold it above my palm between my thumb on one side and my fingers on the other side — so there is no pressure on the clicking feet on the bottom of the trackpad — a "jumping" trackpad instantly becomes a "stable" trackpad. Put it back down on a surface and it starts jumping again.
Also, when it starts jumping or skipping, I also find that if I use one finger and bear down hard on the trackpad, it resumes being responsive.
I am filing a comment about this on Apple's feedback forum at www.apple.com/feedback at the advice of a Genius at the Apple Store at Cambridgeside in Cambridge, Massachusetts USA.

Problem editing Word docs with Magic Trackpad

Hi--I'm a playwright working in Word. I recently purchased a magic trackpad. I'm having a tough time selecting text for cutting, copying, etc. I'll want to select a word or two but wind up getting the whole paragraph, an incomplete chunk, or nothing it all. It's frustrating because I'm used to moving fast. How can I make it behave like the good trackpad in my MacBook Pro? And where can I get a good explaination of the I-beam cursor. Different parts of it seem to do different things.
Boggled

I have the same problem with a Trackpad paired with a new Mac Mini just purchased in September. After a while, my trackpad also starts to exhibit behavior similar to those described by Hecro. The trackpad cursor feels frozen, or else it jumps around, often trying to stay away from or jump over any hyperlink in either text or graphic form on the page I am viewing.
I find that if I pick up the trackpad and hold it above my palm between my thumb on one side and my fingers on the other side — so there is no pressure on the clicking feet on the bottom of the trackpad — a "jumping" trackpad instantly becomes a "stable" trackpad. Put it back down on a surface and it starts jumping again.
Also, when it starts jumping or skipping, I also find that if I use one finger and bear down hard on the trackpad, it resumes being responsive.
I am filing a comment about this on Apple's feedback forum at www.apple.com/feedback at the advice of a Genius at the Apple Store at Cambridgeside in Cambridge, Massachusetts USA.

Fine-grained control with Magic Trackpad?

One thing I find difficult with the Magic Trackpad is making very small adjustments to slider controls in apps such as image and audio editors. I'm referring to the sort of sliders that are sensitive to mouse scroll wheels.
Aside from keeping a mouse connected to operate these controls, or going back and forth to System Preferences to change the tracking speed, are there any ways to do this more easily with a trackpad? For example, a utility that lets you switch to fine-grained movement with the trackpad when you hold down a certain key?

you do not invalidate the session, but the session object is
unavailable only on that page.That is my understanding of how this works.
In effect it removes the implicit call to request.getSession(true) that every jsp makes to populate the variable "session"
If I use the <c:url> tag on page 2 using a cookieless browser the link
is still encoded with the session? Sorry, don't know that one.
The <url> tag will still call response.encodeURL() of course.
I'm not sure if it would pick up the presence of the sessionid or not though.
The session is definitely still there.
The cookie (if present) is obviously still there.
The sessionId is sent as part of the request.
Theoretically it SHOULD pick it up and encode it still if present. I've never tried it myself though.
Good luck,
evnafets

Updating BootCamp for use with Magic Trackpad

I am getting an error message when I try to update from BootCamp 3.0 to 3.1 which I need to be able to run the Magic TrackPad. I am running WinXP and have tried to run the BC3.1 32 bit update but get a message that the "Apple Bootcamp Installer has encountered a problem and needs to close." I have tried downloading and running the update as well as running it off the Support site. The Trackpad works but I can't right click and have no gestures.

Note I do not own magic jack but it looks like a standard ATA voip adapter.
How is the TC setup in the network? ie is it bridged or main router.. Is there another router?
Being a non-apple product you will do better sticking with SMB compliant network names.. ie short no special characters no spaces.. Apple by default break these rules.
Also you may have port forwarding issues.. apple do not use upnp most windows and non-apple products will expect and so you might have to open the required ports not just for sip but the actual call RDP packets.
Even if you do open ports apple routers often break port forwarding. You might find it is easier to use a modem router or alternative standard router and bridge the TC.
Look at posts that deal with issues which will be common with airport extreme.
https://discussions.apple.com/thread/3662236?start=0&tstart=0
I would say it is not working because you have not forwarded the required ports.. or it just doesn't like Apple routers.. plugged into the Mac, the networking is handled by the Mac.. and is able to auto open ports.. non-apple products cannot generally do that.

Right Click doesn't work with Magic Trackpad

The Magic trackpad is great. Finally I have something like the old trackballs I had to abandon to be able to scroll etc.
However I can't get the right click to work even though I have the secondary click checked in the trackpad preferences.
Any ideas how to get it to work?
Also, a real bummer is I had selected tap to click and went on a trip. My old MBP (pre unibody) with a trackpad and a button below it, doesn't have a "tap to click" option in the preference pane once the Magic Trackpad is no longer connected, so I couldn't disable it until I got home. Bad!

Bump!
I have basically the same problem with my magic trackpad. I bought it to get the new features, but with no secondary click it's pretty much useless.
I have the options set for secondary tap. Which I assume is just like the regular trackpad. Two fingers and click - Context menu. But I just get a regular primary click. I hate to think that i wasted $70. Can anyone help with this? Please.
Just a side note: My tap-to-click and secondary bottom right click also don't work. Do I have a malfunctioning trackpad?

Does logic recognize gestures? Replace mouse with magic trackpad?

Can you replace your mouse with a trackpad? I use the wheel for zooming does logic recognize gestures?

I replaced my mouse with the Magic Trackpad when it came out and use it then on my office iMac and my Logic machine. I never looked back.
You can use the gestures to scroll and zoom in Logic and pretty much everthing else.
If you want to take the Trackpad and your customize workflow to the next level, get the BTT (Better Touch Tool) app. You can customize pretty much everything with any finger-touch-combination you can imagine.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/ 'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Erratic Secondary Click with Magic Trackpad

Just bought the Magic Trackpad for use with iMac and 10.6.8.
Mostly I am happy with it, but I cannot consistently get the secondary click (right click) to work. I would say ~90% of the time the right click behaves as a left click.
For instance, when using Safari 5.1, sometimes right clicking on a link works and brings up the contextual menu, but mostly it behaves like a left-click. I have Secondary Click enabled and set to Bottom Right Corner.
FWIW, the Two Finger Secondary Tap works consistently.
Thanks,
Jim

*bump*

Any one has problems with Magic Trackpad´s gestures on mavericks?

all my gestures have fade away with my last upgrade to 10,9,1, Even they appear to be activated but they just doesn´t work.
any one solved it?

Hi totito1984,
Welcome to the Support Communities!
My first suggestion is to simply restart your computer which will reset your Magic Trackpad.
If that does not resolve the issue ... try the troubleshooting steps in this article:
Wireless input devices: Bluetooth frequently asked questions
http://support.apple.com/kb/HT3887
Cheers,
- Judy

Web Browsing with Magic TrackPad...

Just got magic trackpad and upgraded to Lion, how can I navigate forward/back through webpages?

Use the two finger swipe between pages option. System Preferenes > Trackpad > More Gestures tab.
It works well in Safari, but not in Firefox.
Regards,
Captfred

PINCH no longer works in FINDER with Magic Trackpad when resizing icons such as photos. Help.

I am a photographer and I find it VERY convenient to be able to use my Trackpad to PINCH resize icons of photos for quick review. This no longer works in LION. This needs to be restored or can someone tell me how to restore the setting. Thanks
- Shane

Not the same symptoms, but I noticed that after a few days of running great, odd things started happening on my iMac. The first thing was that when I would boot the Mac up for the first time in the morning, it would boot into single user mode. I have the Apple Bluetooth keyboard, so I know there's no way keys are being held down.
The other symptom was that Microsoft Outlook 2011 would hang on launch. It would get stuck on the "Setting Up Identities..." phase. Rebuilding the Outlook database would help until the next time I shut the iMac down.
Also a couple of times it got to the Desktop after a boot, but not everything was working correctly and some startup items didn't load.
The iMac also kept booting into single user mode on the first boot.
I tried reinstalling Mountain Lion, and I thought that fixed both problems, until the next morning. Now I just don't shut the Mac down. I can close Outlook, and it launches in a couple of seconds.
So it would appear that something is becoming corrupt when OS X is shut down. If I don't shut it down, it's fine.

HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

Need help with magic trackpad. some touch functions stopped working. battery full and all touch options checked appropriately. whats the deal?

i have tried everything but the tap functions stopped working. any ideas?

Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

Drag lock with Magic Trackpad closes window

I'm trying to use drag lock but it closes the window when I double tap the top of the window. As far as I understand, the double tap is supposed to enable drag lock. What am I doing wrong?
Thanks.

You have to do a tap-tap + hold not a tap-tap. If you let go of your finger on the second tap you get a double click instead of dragging. That is, if you have the tap to click option enabled.
Message was edited by: doctapeppa
grammar

Navigate with a file with magic trackpad

Similar Messages

Maybe you are looking for