Navigating from detail level column in an hierarchy to another report

I have a requirement as folllows:
In one report,i have a drill-down feature enabled on "TIME DIM".
At The detail level of this dimension is "DAY" column.
SO,from this detail level,when i click on "DAY" column, navigation should be done to another report..
Is it possible to navigate so from detail report..
pls let me know the solution for this requirement..
thanks,
seeusass

Instead of Drill down,Give Navigation in first report to child report.But for this you need to create n reports if you are having n number of levels in hierarchy.Then at the detail level report you can give navigation at day level.
Thanks
Don

Similar Messages

How to put detail level data in the header of my report

I have this XML from PIR05.rdf
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO></SUBLOT_NO>
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2></ITEM_UM2>
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL> </P_ITEMUM2LABEL>
<P_ITEMUM2DASH> </P_ITEMUM2DASH>
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL> </P_CSITEMUM2_LABEL>
<P_CSITEMUM2_DASH> </P_CSITEMUM2_DASH>
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
<WHSE_OUT>WOR</WHSE_OUT>
<DATE_OUT>2010-11-23T16:12:13+00:00</DATE_OUT>
</PIR05>
I have a template where I have a header section and a lines section which breaks the page on the value of the LOCATION. I would like to put the value of the LOCATION in the HEADER of the report. How do I reference the current value of LOCATION, for example on page 30?
The report looks like this:
whse_out cycle_no
location lot_no
location lot_no
New page
whse_out cycle_no
location lot_no
location lot_no
How can I get the value of LOCATION in my "HEADER" section and have it be the same value as the first location listed on the page?

Hi,
you need to create an automated section break, .. in your for loop, add @section to the syntax.. that will create a section break everytime the node enters a new location info.. in the header just put in the tag for the location, it will pick up the first location and display it there..
-domnic
p.s. if youre not able to do it, send me your template with a sample XML file, ill see what i can do.

Navigating from one movie to a particular frame in another

Is it possible to navigate to a particular frame in a different movie... the reason being, I am trying to minimise the size (mb) of the movie so it doesnt get to a stage where the machine it is on bogs down. For example, I am cutting the movie down into each product which has 20-30 stop frames in it (getting to around 24mb) per product... if i were to combine all products together (15 of them), u can imagine the size (mb) of the movie...
Thanks again

I found another post similar to this with an answer that worked. Sorry for the double post.

How to merge top level navigation into detail navigation panel.

Hi All,
I want to add all the contents of top level navigation into detail navigation panel and remove top level navigation.I am looking for the code with which i can shift the top level navigation to detail level navigation.

You could edit the top-level navigation iview and set the <b>Number of Display levels</b> property's value to 0.
you can reach the Top-level navigation iview by going through the following path
1) <b>Content Administration --> Portal Content --> Content Provided by SAP --> Admin Interfaces --> Top-level navigation</b>
However, note that once you do this the whatever menus that are available in the top level will not be available anymore.
Maybe, you could copy the standard Top-level navigation into a framework page that you have created and then make the change. After doing so, you can assign it to groups/roles you want. This will ensure that the CONTENT/SYSTEM/USER administrators see the normal portal framework and specific user groups alone dont see the Top level navigation..
Pradeep.

Link from a report to another report

Hi all,
I have created a report called GROUPS with GROUPNO as the first column. And I have another report based on SQL query that shows the details for a group and takes the GROUPNO as an input variable. I have created a link from the first report to the second report.
The problem is that when I run the first report, and when I click on the GROUPNO from the list of groups, the target report is called but no rows are selected. When I point the mouse cursor to one of the GROUPNO, and I look at the breowser status bar, I see that the p_arg_names containts the parameter name but the p_arg_values is empty.
Any help?

Hi Sharmila,
The mapping is already done and the p_arg_names in the status bar shows the p_arg_names=groupno , only the p_arg_values is not taking the value in the field groupno which cause the target report to fail.

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

OBIEE 11g - Navigation from Hierarchy Column

Hi Experts,
I have created one Organization Hierarchy (Country --> Region --> State --> City) in the Logical Layer of the rpd and pull that hierarchy with the dimension in the Presentation Layer. In the new analysis I have created dashboard prompt with the Organization hierarchy and created a report showing Total Headcount column and Organization Hierarchy column (using selection steps feature in OBIEE 11g).
Now when I select Region from the dashboard prompt, in the report it is showing me total headcount according to my region selected in the prompt, but when I tried to navigate from the Total Headcount to see the list of employees in that particular region, I am not able to see the list of employees belonging that particular region rather it is showing me the list of total employees at the Country level.
PS - In the navigation report I am prompting Country, Region, State and City from the Organization dimension, but I am not able to prompt Country, Region, State and City from the hierarchy column which is there in the Organization dimension.
Please Help.

Hi,
You need to create the drill down report also using selection steps. I tried the drill down was working fine.
Thanks

How to Display Detailed navigation passing Top level navigation node name

Hi All,
I have prepared a DLN par file but unfortunatly my requirement is such that I need to pass one of the toplevel node name as input parameter and that should display the corresponding DLN which is from 3rd level.
I have checked in sdn for passing a value to the navigation tag lib which will consider it as a selectednode but could find none.
Can some body suggest me how to acheive this.
Thanks in Advance.
Sai Krishna. K

Hi Kiran,
Thanks for your Reply..
Following is my Scenario:
I use 2 same versions of portals connected via federated portal concept.
I have my detailed navigation par file in portal2 and was calling it from portal1 from a iview.
Since I am not physically navigating in portal2(which mean there is no selected node to iterate ), when I call that iview in portal1 it is picking up only 1st node in top level navigation.
So i need to pass "My reports" (as 1st level) & "India" (as 2nd level) as parameters such that it gets only its DTN at all times from 3rd level.
Hope you understand my scenario, below is my iteration code logic.
<div id="myslidemenu" class="jqueryslidemenu">
<ul>
     <nav:iterateSelectedNavNodesLevel level="<%=START_LEVEL%>">
     <%-- the 'currentDepth' attribute provides the byte value of the current level --%>
    <nav:recurseNavNodeChildren currentDepth="depth">
         <% current = start + depth.intValue() - 1; %>
         <%=writeClosingTags(last - current)%>
         <%
        last = current;
        %>
        <%-- we want to distinguish between folder and leaf nodes so we can use different graphics --%>
          <%-- complete the html syntax for the 'class' attribute pass it as an anchor attribute--%>
          <li><nav:navNodeAnchor navigationMethod="byURL" />
          <%-- checks for additional navigation level and the appropriate html tags to accomodate them --%>
        <nav:ifNextRecursionDepthWillIncrease>
            <ul>
        </nav:ifNextRecursionDepthWillIncrease>
        <nav:ifNextRecursionDepthWillNotChange>
            </li>
        </nav:ifNextRecursionDepthWillNotChange>
    </nav:recurseNavNodeChildren>
    <%=writeClosingTags(last - start)%>
    <% last = start; %>
</nav:iterateSelectedNavNodesLevel>
</ul>
</div>
As per the passing parameter concept please explain me a bit more clear with step by step procedure.
<b>Here if not passing parameters, providing static values will also do for my requirement.</b>
Many Thanks,
Sai Krishna.
Edited by: Konchada Sai Krishna on Feb 14, 2009 9:42 PM

Passing values of the column in the last level of a dimension hierarchy.

My report has two colums
Column1 (Dimension has a hierarchy)
Columns2 (Fact with an Aggregation Rule)
I want to use the drill down facility in column 1 and pass the value in the last level of the hierarchy to navigate to another report. Can someone help me on this?
[Note: The above is possible when the column that is on the last level of the drill hierarchy is in the main report]

@ubuntupenguin Thanx for your prompt reply.
I am currently able to store all the necessary symbols in an array. But, How do I query for multiple symbols in the SQL Query ?
I have an array symArr[] which consists of all the symbols I need to query from the database. So, How should I write the SQL Query is my question.
I could have created a string which looks something like this from the symArr[] array:
XOM,AA,BAC,BB,BBC,....
But, the problem would be when I try to query these symbols in the php data service using "SELECT * FROM TABLENAME WHERE SYMBOL IN (?)"
where the variable $symbol is the populated string (XOM,AA,BAC,BB,BBC,.... ). So, to rephrase my question, Could I use SELECT * FROM TABLENAME WHERE SYMBOL IN (?) to query for Multiple symbols or is there a better approach.
Thanx in advance.
-Krishna

Customize detail level navigation

Hi,
I want to create my own detail level navigation(dln) iview. I need to have the same functionality of the standard dln iview with minor changes.
So my question is : Is there any par file provided by sap so that I can extend or simply reuse it.
Next question is :
From which jar files I can get the following classes.
com.sapportals.common.PPLogger;
com.sapportals.common.TracingConsts;
com.sapportals.portal.useragent.IUserAgent;
com.sapportals.portal.useragent.IUserAgentService;
Thank you very much for the time.
Best Regards,
Shiva

Hi Shiva,
EP provides bak files for many of its UI, like masterhead,TLN etc. Like that it also provides the bak file for detailed navigation area.The par file is
com.sap.portal.navigation.detailedtree.par.bak
U can get this par file from server System Admin>>Support>>Portal Runtime>>Browse deployment>>WEB-INF>>Deployment>>pcd.
Import this par file into ur NWDS and edit it accordingly.
Hope this helps
gEorgE

Detailed Level Navigation missing post NW 7.31 portal SP12 upgrade

Hi,
We are on NW 7.31 portal . We have recently upgraded portal from SP 9 to SP12. Post upgrade the the detailed level navigation panel is missing . I have checked the role and workset setting and its absolutely fine. Any idea what might be the issue? It was visible before upgrade.
Regards,
Navya

Hi Navya,
When you click on a link for an SCA file you see on the right side a yellow icon, that's the dependency calculation tool, it will automatically tell you the dependend components.
In this case:
Notice you have a download button on the right side for each SCA.
Hope this helps,
BR,
Saar

Detailed Level Navigation Missing

When we have upgraded Portal (NW2004s) from SP13 to SP14 we were not able to see the Detailed level Navigation in Production environment, that was working fine in Development and Test environments; Also the content area was missing because of the upgrade.
Can anyone throw some light on this?

HI,
Please confirm that your Portal framework in production environment contains Innerpage->detail level navigation iview in that. If not then u have to import that from dev server.
Same you can check for the Content Area whether framework contains Content Area iview.
Regards
Parth
**Points will be welcomed**

Create link in detailled level navigation after creating BSP iview

Hi All,
I have created few bsp iview in portal. After assigning these iview to role, a create link is unnecessary visible in detailled navigation.
I would like to hide it.
I have tried to play with iview properties but no luck
please advice.
Regards
Shashwat Gupta

Dear Shashwat,
Try assigning BSP iview or page directly to roles and test it.
Also check in page or workset properties to hide from detailed navigation instead of iview itself.
Search in to help.sap.com
Hope it will helps
Best Regards
Arun Jaiswal

Problem in sorting Detail Level of hierarchy

Hi,
I have a Calendar table having calendar_dmk as a primary key. (Month is stored as a first day of a month).
---Calendar_DMK------Date(dd/mm/yyyy)-------Calendar_Month---------Calendar_Year
----------1111111--------------------12/01/1997----------------01/01/1997----------------------1997---------
----------1111112--------------------13/01/1997----------------01/01/1997----------------------1997---------
----------1111113--------------------14/01/1997----------------01/01/1997----------------------1997---------
----------1111145--------------------21/02/1997----------------01/02/1997----------------------1997---------
I have created a logical column *"Month Name"* in BMM layer as monthname(Calendar.Calendar_Month) which extracts month from the calendar table. I have created another column *"Month"* as month(Calendar.Calendar_Month).
I have created Hierarchy following way....
Calendar_Year_Dim
|
|*Calendar Total*
|--Year contains Year as (key=Year and Drill Down = "Year")
|--------Month Contains Month and Monthname (pk="Month+Year" and drill down= "Month Name")
|--------------Day contains Calendar_dmk and date (pk = Calendar_dmk and drill down=date)
I have created one request in pivot table where I have taken "Month" in column area. When I drill down on Month, the data comes datewise, but date is not sorted. (I have set sort order property of Date column to calendar_dmk)
Is there anything I'm missing?

Make date the first column in pivot.

Filter condition not working when Navigating from Main report to detail

Hello,
I have one report in OBIEE 10.3.4. Below is the filter condition used in Main report:-
(Customer Secondary Organization is equal to / is in BMS OTHER C
AND Customer Tertiary Organization is equal to / is in S&FO )
OR Customer Secondary Organization is equal to / is in MKTG
Also in my detail report I am using the same filter conditions:-
(Customer Secondary Organization is equal to / is in BMS OTHER C
AND Customer Tertiary Organization is equal to / is in S&FO)
OR Customer Secondary Organization is equal to / is in MKTG
Now when I am navigating from Main report to Detail report, then this filter condition is getting overridden by below condition:-
Customer Secondary Organization is equal to MKTG
and Customer Tertiary Organization is equal to S&FO
or Customer Secondary Organization is equal to MKTG
What I noticed is If I rearrange the filters and make it as below:-
(Customer Secondary Organization is equal to / is in MKTG
AND Customer Tertiary Organization is equal to / is in S&FO)
OR Customer Secondary Organization is equal to / is in BMS OTHER C
Then I am getting the filter in detail report as:-
Customer Secondary Organization is equal to BMS OTHER C
and Customer Tertiary Organization is equal to S&FO
or Customer Secondary Organization is equal to BMS OTHER C
It is taking Secondary Organization which is 2nd one in the main report.
Can anyone please help me on this.
Thank You,
Shivam Saxena

Hi,
What you can try is refer the filte condition in the main report to the detailed report with the option--> Filter based on another request.
Or you try creating another intermediate report which will refer the main report filters and pass the filters to the detailed report.
Hope this helps.
Regards
MuRam

Navigating from detail level column in an hierarchy to another report

Similar Messages

Maybe you are looking for