Navigating Table of Contents with Module Reviews and Knowledge Checks

I have been using 5.5 for at least 3 months without issue.  
My current course is being published SCORM 1.2 to SumTotal LMS, but that is not relevant at this time.
I have 3 modules in the course (3 module reviews and sets of knowledge check questions).
Each set of knowledge check questions are 3 random questions from respective quiz pools.
The final quiz is the only one with weighted values that report to the LMS.
Problem...
When you click past the Module Review (use Module Review 2) and take the knowledge check questions, and then click that Module Review 2 page via the Table of Contents, the Next and Back buttons do not work and everything freezes.
This even happens when in preview mode in Captivate, and I don't even have to post to LMS.
Help, please!

I have a specific style set up (similary to body text) to dress the table of contents at 11pt. Overset text was my thought too! but its actually just an empty paragraph with a title. I've attached an image to help explain.

Similar Messages

  • How to create labeled table of Content with expand and collapse

    Hi All,
    Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
    User1
    Template1
    Template2
    User2
    +
    User3
    Template1
    Template2
    Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
    Thanks
    Bhupendra

    Hi,
    Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
    Expand/Collapse are part of HGRID.
    I think we can develop this functionality with little manipulation.
    Regards,
    Reetesh Sharma
    Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM

  • How do I create a table of contents with a nested style paragraph?

    I'm having difficulty figuring out how to generate my Table of Contents with a nested style. In this screen shot, "SPECIAL EVENTS" is considered level one and the pink circled "Fittest Firm Challenge" is level 2. Because it is a nested style, it is picking up the entire paragraph. I don't want to put in a paragraph break because that would add too much space in the magazine since there are a lot of other listings like this. I've tried reading through other people's discussions but I'm totally lost with the explanations. Is there a simple workaround or solution to this?

    apricotanna wrote:
    I'm having difficulty figuring out how to generate my Table of Contents with a nested style. In this screen shot, "SPECIAL EVENTS" is considered level one and the pink circled "Fittest Firm Challenge" is level 2. Because it is a nested style, it is picking up the entire paragraph. I don't want to put in a paragraph break because that would add too much space in the magazine since there are a lot of other listings like this. I've tried reading through other people's discussions but I'm totally lost with the explanations. Is there a simple workaround or solution to this?
    You're asking InDesign to do something it's not designed to do, namely, to treat a nested-style section of a paragraph as an independent paragraph. That's called a "run-in paragraph" in Adobe FrameMaker, and it's been a beloved feature there since FrameMaker was introduced in '89, about ten years before InDesign.
    You can make a formal feature enhancement request here: Wishform Many InDesign features have come into being from user requests, so lend your voice, and be patient. Explain why you think a run-in paragraph feature would be useful.
    Others have asked about this, and there are a number of workarounds that may or may not be suitable for you. Let's hope that some of the more-intense forum folks can help you with a useful search term for this forum, so that you can review what's been suggested and tried in the past, and what results you can expect.
    In the meantime, you might consider inserting the second-level heading in an inline anchored text frame in the paragraph. It will be an independent paragraph but you can adjust appear on the same line as following paragraph. Then you can extract it for the TOC.
    Here's an example:
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • Linking table of contents with pages 5.0

    I write some help-books for friends and the family.
    I wrote down everything I need and I've created a table of contents with page numbers.
    Now you can push the numbers behind the headings and you are automatically on the right page for reading the text. (In Pages document)
    In pages 5.0 these things are still working fine, but....
    When I export the document into a pdf, you can't push/touch the headings and the numbers behind there headings.
    With the old pages, after exporting the document into a pdf, you could import it into iBooks on the iPad. In iBooks now you can touch a heading and you'll get on the right page.
    That was realy helpfull, 1 click and you could read the text on which you're interested.
    But with the new pages 5.0 this feature is deleted... or I do something wrong.
    Could anyone of you help me for getting this feature back, if I do something wrong?

    Well there is a standard body for EPUB - http://idpf.org/epub
    And, Apple furnishes the TEMPLATE - the Pages 09 TEMPLATE - automatically (supposedily) makes the TOC links which - then - you can export to EPUB.
    Again, the problem I'm daling with is that the Kindle for the iPad, does not see the TOC. It des see it in the Kindle Softward for the Mac - which is different - for some reason. I have authored two books on Pages but Amazon converts my EPUB file to fit the Kindle device itself.

  • Table of Content with page number for entire pdf

    Hi
    We need to merge dynamic pdf with n number of static pdf.
    The output of the generated pdf has one of the page called Table Of Content with page number.
    For this we have created following process
    We created a form using Adobe livecycle form designer to populates input data(xml).
    We created process to generate dynamic pdf .
    We have static pdf's in some folder location(Eg:C:\temp)
    We created xsl to generate DDX to merge Dynamic pdf with static pdf's by using an assembler operation in the Process
    There are number of static specification pdf's  inserted in between of dynamic pdf using logic in xsl.
    We used bookmark option in xsl for creating table of content .
    While invoking the process we are able to generate the correct merged pdf with some unformatted page of table of content
    We can explain better in the following way where we are actually facing a challenge:
    We need a table of content in the below mentioned format:
                                                                                                                 PAGE
    MAIN DESCRIPTION                                                                                    n
    ID1             NAME1            DESCRIPTION   1                                              m
    ID2POK       NAME2            DESCRIPTION   2                                              m
    FDJKHJG                                                                                                   
    ID3             NAME3            DESCRIPTION   3                                              m
    MAIN DESCRIPTION2                                                                                 n
    ID3            NAME3            DESCRIPTION   5                                               m
    ID4            NAME4            DESCRIPTION   4                                               m
    ID5            NAME5            DESCRIPTION   5                                               m
    Since the pdf merging and numbering is done  using ddx at runtime, page number tag is not there in xml and  therefore the toc page cannot be populated at the time of form design.
    The issue we are facing is that, by using ddx script we are not able to align id,name,description in  table of content in proper manner. We want to wrap particular id ,name and description in their respective columns.
    Currently, we are getting the below mentioned result which is not in a proper format.
                                                                                                               PAGE
    MAIN DESCRIPTION                                                                                n
    ID1HDSJHJDHFDJFHD            NAME1FDJFHDJH           DESCRIP
    TION 1                                                                                                    m
    ID2POKLFDJKHJG           NAME2FDJKFJDKFJKD            DESCRI
    PTION   2                                                                                                m
    ID3            NAME3            DESCRIPTION   3                                             m
    Note: Page numbering has been done only after merging all the pdf(Dynamic and static) using ddx  instead of the adobe livecycle form designer.
    Is there any solution to resolve the formatting issue or any other option to create table of content dynamically ?

    Hi SaCvP,
    According to your description, you want to display the table of contents with page number in SSRS 2014.
    In Reporting Services, the global variable PageNumber or Totalpages can be only used in the page header and page footer. In your scenario, you can create a table of content using document map, but we can’t specify the expression with PageNumber or Totalpages.
    So your requirement can’t be achieved currently.
    Reference:
    Create a Document Map (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • SSRS - Table of Contents With Page Number

    Hi! 
    Is it possible to create a table of contents in SQL Server Reporting Services 2014 with the following aspect:
    <w:sdt docparttype="Table of Contents" docpartunique="t" id="1230267000" sdtdocpart="t">
    Contents<w:sdtpr></w:sdtpr>
    Report 1.............................1
    Report 2.............................2
    Report 3.............................3
    </w:sdt>
    I don't want Hyperlink because this report is to be used printed. I have some urgency in this question. 
    Thank you for help!!!

    Hi SaCvP,
    According to your description, you want to display the table of contents with page number in SSRS 2014.
    In Reporting Services, the global variable PageNumber or Totalpages can be only used in the page header and page footer. In your scenario, you can create a table of content using document map, but we can’t specify the expression with PageNumber or Totalpages.
    So your requirement can’t be achieved currently.
    Reference:
    Create a Document Map (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • LOV with auto suggest and multiple check boxes

    Is it possible to implement LOV with auto suggest and multiple check boxes using ADF faces components?. Any alternative implementation/pointers are appreciated.
    Regards,
    Surya

    Hi,
    build it yourself as a task flow opened in a popup. see: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/69-custom-lov-with-btf-276178.pdf
    Frank

  • Creating a Kindle-friendly table of contents with pages

    I'm trying to figure out how in Pages (I just recently bought it and want to use it instead of Word) to create a Kindle-friendly table of contents, so readers can click on a chapter title and go straight to that chapter, for the fiction I want to publish on Kindle. In Word I right click on Heading 1 while the chapter title is highlighted then click Update to Match Selection. Then I create a hyperlink to that chapter title to its corresponding title in the table of contents. This does not work in Pages. Do I need to use the hyperlink option in Inspector? If so I don't know how.
    And does anyone know how I can create what Kindle calls "Guide Items", where Kindle users can go to from anywhere within the book?
    I suppose I can write everything in Pages and then set up the table of contents and guide items in Word but it would be nice to be able to do it in Pages, thanks.
    Lyle

    Well there is a standard body for EPUB - http://idpf.org/epub
    And, Apple furnishes the TEMPLATE - the Pages 09 TEMPLATE - automatically (supposedily) makes the TOC links which - then - you can export to EPUB.
    Again, the problem I'm daling with is that the Kindle for the iPad, does not see the TOC. It des see it in the Kindle Softward for the Mac - which is different - for some reason. I have authored two books on Pages but Amazon converts my EPUB file to fit the Kindle device itself.

  • Generating table of contents by chapter number and title in reports

    Hi all,
    how can i generate a table of contents in reports?
    I will definitely need the chapter numbers and their respective titles to do that.
    Are there specific templates to follow in order to do that?
    Thanks.

    Your profile lists 10.6.2 as your OS version. If this is true, it may be the source of problems with Pages. Keeping both the OS and iWork apps updated will avoid some problems.
    Jerry

  • ADF Table filter issue with OR or AND input value

    Hi all,
    adf:table filterable fields for OR or AND input value not works. Actually One of column is for State and it has "OR" value for -> OREGON State.
    and I tried using filterModel and queryListener for table attribute. But I am not getting exact clue where I need to fix for this issue. Any suggestion and help is appreciated greatly.
    jdev version 11.1.1.3
    Thank you.
    - Robin

    Something like this might work for the one case:
    public void handleQuery(QueryEvent queryEvent){
        // Replace the OR with an equivalent condition
        Map m =
          ((FilterableQueryDescriptor) (queryEvent.getDescriptor())).getFilterCriteria();
        for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
          if (entry.getValue() != null &&
              StringUtils.equalsIgnoreCase(entry.getValue().toString(), "OR"))
            entry.setValue("O AND _R");
        // Process The Query
        ELUtils.invokeMethod("#{bindings.VOQuery.processQuery}",
                             QueryEvent.class, queryEvent);
        // Put the OR back
        for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
          if (entry.getValue() != null &&
              StringUtils.equalsIgnoreCase(entry.getValue().toString(),
                                           "O AND _R"))
            entry.setValue("OR");
    }

  • No Table of Contents with MP4?

    I've enabled the TOC for my Captivate project.  When I publish it as a SWF, and in preview mode, I can see the TOC.  However, when I publish to YouTube or as an MP4, I do not get the TOC.  Is there any way to enable the TOC for MP4 or on YouTube?
    thanks!

    Hello there,
    Table of content is only for interactive content and video is not interactive, that's the reason you don't find the TOC for MP4 publish.
    Thanks,
    Vish

  • Table of Contents with Page Numbering in bi-fold brochure?

    I am creating a bi-fold brochure that is a total of 10 printed pages front to back.
    Is it possible to create a table of contents on the inside cover of the brochure, and have it automatically page number the other pages of the brochure, or is this only possible in the more high-end desktop publishing programs?
    Thanks very much in advance for your help,
    Phil

    Pages does page numbering as does most word processing software.
    Have a look at your options for Mac software here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=7&mforum=iworktipsnt rick
    Peter

  • Table of Contents with same image on every chapter?

    When I started my book, the Table of Contents automatically took
    the main image of every chapter, and added it in a smaller size to
    my contents pages. Quite nice...
    But now, my Table of Contents has the same image on every page.
    Where did I go wrong, and - more important - can this be restored?
    TIA - Stefan

    Not sure what you did, but you can re assign connection between the chapter images and the TOC image if that connection gets lost (by deleting the place image place holder on the chapter page in the layout pane etc.)
    click on chapter in layout pane and select image (or insert a new one if it was deleated) in inspetor assign it "main image"
    then on the TOC page click the master image place holder and delete the image(place holder will not be deleted)
    makes sure there is not an image ontop of the place holder.

  • Temp Tables space problem with ORA-01114 and  ORA-27072:

    RDBMS :Oracle:9.2.0
    OS: Linux AS3
    Storage: SAND arrray (RAID 5)
    Problem on exeuting dml statement
    SQL> select * from myview ;
    select * from myview
    ERROR at line 1:
    ORA-01114: IO error writing block to file 201 (block # 3977)
    ORA-27072: skgfdisp: I/O error
    Linux Error: 28: No space left on device
    Additional information: 3976
    ORA-01114: IO error writing block to file 201 (block # 3977)
    ORA-27072: skgfdisp: I/O error
    Linux Error: 28: No space left on device
    Additional information: 3976
    With Regards
    Joy

    Hello joy,
    So, still looking for solution. I suggest you a sloution and it works well only if as you mentioned (in your previous post) that file causing error is temp file. So, get rid of this better you create new temporary table space and drop old one and then delete the old files manually.
    But this will work only for Temp Tablespace not for normal tablespaces and datafiles. Prepare new temporary tablespace at different location from the previous one, try to make it on different disk beacuse it may be due to corruption of physical medium too.
    Try this. If it works... you are through... otherwise i have no other options...
    Please update.....

  • Matching words on the content with the glossary and creating links

    Is it Possible?
    We have a glossary (a big list of complex words with their definitions). On a nightly (weekly? monthly?) basis, can all content on the site be reviewed. If a word was found in the content that matched any of the glossary definitions there would be a link automatically created that can link the content word to the glossary definition.
    if need more info let me know..
    Thanks in advance
    SP

    how is all this data stored?

Maybe you are looking for