Navigating with the mouse: Differences between iDVD 4 and 5

Hello,
I just finished making a DVD with iDVD5. Everything, slideshows, movies and menus were in the right place and playable but I was surprised to find that I could only navigate using the up/down arrows on the control panel or the keyboard. Last time I made a DVD I used version 4 and I could select a movie from the finished DVD with the mouse.
Is this a feature change between versions 4 and 5 or a settings choice I have failed to make before burning in 5?
Thanks for any help.
Will Percy

John,
Thank you for responding. I've been having some trouble with Safari and OmniWeb (not being able to play QuickTime content,) which I think coincided with my installing Flip4Mac software. After disabling all the plugins except those for QuickTime normal service resumed. I haven't had time to slowly switch plugins back on to see which is the culprit, but I wonder if this problem had any bearing on my iDVD question? I should also burn another DVD to see if the problem has been resolved.
Thanks again for taking the time to offer help.
Will

Similar Messages

What are the major differences between UCCX v7 and v8.0.2

Does anyone know of a matrix or document which shows the major differences between UCCX v7 and v8.0.2?
I have looked high and low, even searched this forum, but have not found anything.
I've even looked at release notes in 8.0.2 but couldn't see anywhere that states the changes.
Any help appreciated.

Hi,
I have awarded you both with the 'correct answer'.
I went through, painstakingly, the documents I was linked to above and compared.
In the end the major differences are pretty much what you have outlined here - which is exactly what I wanted.
Thank you both very much.
Cheers,
Brett
PS: Here are the obvious differences I found going thru the documentation I was linked to... (pretty much what you said)
Feature
V7
V8
High   Availability over the WAN (HAoWAN)
No
Yes
Available in   an Appliance Model
No
Yes
Read-only access to Cisco Unified Contact Center Express   database (Informix) with JDBC, ODBC, or Structured Query Language (SQL)
No
Yes
System   Software Configuration
MS Windows Server   2003
Cisco Media   Convergence Appliance Software
System   Software Configuration (client)
XP and Vista
XP, Vista, and Win7
System   Software Configuration (browser based client software)
No
CAD and Workforce   Management
System   Software Configuration (Web 2.0 based client software)
No
QM and AQM
Operating   System
Cisco OEM Windows   Server 2003
Cisco Voice OS

What are the major differences between 4.7 and ecc5.0

hi all
What are the major differences between 4.7 and ecc5.0
regards
JK Rao

Hi,
Good morning and greetings,
Please use the following link
http://solutionbrowser.erp.sap.fmpmedia.com
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Whats the actual difference between Business system and Business service

whats the actual difference between Business system and Business service

Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Also go through these links and threads...
http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Business service or Business system??
Business Service vs Business System in Integration Directory.
Best Regards

Can anyone explain the main differences between CRM 2007 and CRM 7?.

Can anyone explain the main differences between CRM 2007 and CRM 7?.
Does CRM 2007 use the WebUI?.
Jason

My fault for not putting my question forward correctly.
I have worked with CRM 7 a few times now, but my experience has jumped me from CRM 5 straight to CRM 7, having never touched CRM 2007.
I now have an opening to work on CRM 2007 so I was intrigued to know what it physically looked like. I assume it does not use the WebUI interface?.
Jas

What is the main difference between f.13 and f13e

Hi,
What is the main difference between f.13 and f13e.
when clearing the document do they follow deifferent steps in selection?
Thanks,
Sravanthi

Hi,
The reason "Clearing currency" is provided is because you can clear in any currency apart from local currency. For eg if your local currency is INR and Document currency (Invoice) is USD and the customer pays in EUR, you can still clear them with the Clearing currency EUR. On the date of payment, Open items in USD will be converted into Clearing currency EUR as follows: USD to INR and from INR to EUR. (based on exchange rates between USD-INR and INR-EUR).
Jayaram

What is the exact difference between Database Cloning and Database Refresh?

Hi,
Can anybody tel me the exact difference between Database Cloning and Database Refresh?
I Have some conflicts in these topics.
Thanks
Rajesh

Refresh is what it says, "refresh" . You have a main site which would always have the data being inserted into it. There would be another site which would remain some where else . This site needs to be refreshed with the primary site. So you need to do export from the primary, push it to the secondary site and done!
HTH
Aman....

Wat is the exact differences between clustered table and pooled table

hi,
can you tell me ravi...wat is the exact differences between clustered table and pooled table
with regards//
anilreddyg

Hi Anil Reddy
Pooled Tables, Table Pools, Cluster Tables, and Table Clusters
These types of tables are not transparent in the sense that they are not legible or manageable directly using the underlying database system tools. They are managed from within the R/3 environment from the ABAP dictionary and also at runtime when they are loaded into application memory.Pool and cluster tables are logical tables. Physically, these logical tables are arranged as records of transparent tables. The pool and cluster tables are grouped together in other tables, which are of the transparent type. The tables that group together pool tables are known as table pools, or just pools; similarly, table clusters, or just
clusters, are the tables which group cluster tables.Not all operations that can be performed over transparent tables can be executed over pool or cluster tables.
For instance, you can manage these tables using Open SQL calls from ABAP, but not Native SQL.These tables are meant to be buffered and loaded in memory, because they are commonly used for storing internal control information and other types of data with no external (business) relevance. SAP recommends that tables of pool or cluster type be used exclusively for control information such as
program parameters, documentation, and so on. Transaction and application data should be stored in transparent tables.
Table Pools
From the point of view of the underlying DBMS as from the point of view of the ABAP dictionary, a table pool is a transparent table containing a group of pooled tables which, when created, were assigned to this table pool.
Field Type Description
TABNAME CHAR(10) Table name
VARKEY CHAR(n) Maximum key length n =< 110
DATALN INT2(5) Length of the VARDATA record returned
VARDATA RAW(m) Maximum length of the data varies according to DBMS
Table Clusters
Similarly to pooled tables, cluster tables are logical tables which, when created, are assigned to a table cluster. Therefore, a table cluster, or just cluster, groups together several tables of type clusters.Several logical rows from different cluster tables are brought together in a single physical record. The records
from the cluster tables assigned to a cluster are thus stored in a single common table in the database.A cluster contains a transparent cluster key which must be located at the start of the key of all logical cluster tables to be included in the cluster. As well, a cluster contains a long field (VARDATA), which contains the
data of the cluster tables for this key. If the data does not fit into a field, continuation records are created.
Field Type Description
CLKEY1 CHAR(*) First key fields
CLKEY2 CHAR(*) Second key field
CLKEYN CHAR(*) nth key field
PAGENO INT2(5) Number of the next page
TIMESTMP CHAR(14) Time stamp
PAGELG INT2(5) Length of the VARDATA record returned
VARDATA RAW(*) Maximum length of the data section; varies according to database system
Working with Tables
The dictionary includes many functions for working with tables. There are five basic operations you can perform on tables: display, create, delete, modify, copy. Please do not confuse displaying a table with displaying the table entries (table contents). In order to display a table, it must previously exist; otherwise the system will display an error message in the status bar. For the following example, the table TABNA is used. To display this table, from the main dictionary screen, enter the table name in the Object name
input field with the radio button selected next to Tables. Then, click on the Display button at the bottom of the screen, or press the F7 function key, or, alternatively,
select Dictionary object Display from the menu.
In this screen, you can see table information such as
¨ Table type, shown next to the name of the object. In the example, it is a transparent table.
¨ Short text description.
¨ Name of the user who made the last change, and the date of the change.
¨ Master language.
¨ Table status. On the screen, you can see this table is saved and active.
¨ Development class. For information on development classes, refer to Chap. 6.
Delivery class, which sets the maintenance group for the table. It controls how tables will behave during client copy procedures, upgrades, and so forth.¨
Tab. Maint. Allowed flag, which indicates whether you can generate a screen for maintaining table entries.
¨Then, on the lower part of the screen, you can see the table fields with all associated characteristics such as:
¨ Field name.
¨ Key indicator. When set, this field is the primary key, or part of it.
¨ Data element.
¨ Basic data type.
¨ Length.
¨ Check table.
¨ Short text, describing the field.
Additional information about the table can be displayed by selecting the corresponding functions from the menu or directly from the application toolbar, such as keys, indexes, or technical settings
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Index table:
The table can be a standard table or a sorted table.
Index access is allowed to such an index table. Index tables can be used to define the type of generic parameters of a FORM (subroutine) or a function module.
Just have a look at these links:
http://help.sap.com/saphelp_nw04/helpdata/en/90/8d7304b1af11d194f600a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/74/83015785d811d295a800a0c929b3c3/frameset.htm
Regards
Sreeni

What is the exact difference between Purchse order and purchase requisition

Hi all,
What is the exact difference between Purchse order and purchase requisition.
Thx

Hi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam.

What is the basic difference between Hyperion Planning and HFM

Hi GURU'S,
what is the basic difference between Hyperion Planning and HFM and when do we choose them.

On a high level the difference is this:
1. HFM is best for global collection (collecting data from scattered entities), group consolidation and for easily structuring financial reporting (mainly consisting of financial data)
2. Planning is best for modeling your business, starting from a demand forecast and arriving to capacity planning and finally to financial statements, by utilizing business drivers (non-financial data like volumes, prices, productivity rates etc)
Of course, differences may be analyzed at several levels down to technical, but the discussion may turn out to be too long, yet adding little value to the question: "when do we choose the one over the other". Bear in mind that your requirements may turn out that you need both.

What are the main differences between Signal Express and Labview?

National Instruments provides a matrix so one can quickly compare the
various versions of Labview but no comparison of Signal Express with
Labview. Hence how does Signal Express compare with Labview? What
are some of the things one can do with Labview one can't do with
Signal Express?
Howard

hrh1818 wrote: Which version of Labview are you referring to? I don't consider the graphical version of Labview to be a full featured programming language. LabWindows/CVI is by a long shot a lot closer to being a full featured programming language than the graphical version of Labview.
Howard,
You clearly don't know what you are talking about. There is no "graphical version" of LabVIEW, there is just LabVIEW. Click on the article "Is LabVIEW a general purpose programming language?" written by the Jeff K. for some easy reading from a few years ago. It is all still true (except that object oriented features and recursion have been added in recent versions).
One of the main points at this years NI-week was the discussion of how processor development is switching more and more to multicore designs to improve performance because a simple boost in clock frequency is becoming more difficult. Linear, text based code is not well suited to take advantage of multticore design, while the dataflow based LabVIEW programming language automatically scales well to multiple processor cores, without any need to rewrite older code. I would say that only LabVIEW is futureproof in this respect. LabVIEW programmers are not wimps that are simply too stupid to write text based code. LabVIEW is not a toy language for people that don't want to learn a "real" programming language.
LabVIEW is arguably the best programming language in terms of getting things done! I've never felt limited with LabVIEW and my programs often don't even have anything to do with data acquisition or instrument control. The difference between text based code vs. LabVIEW is like "DOS vs. Windows", "Radio vs. HD television". "Trilobyte vs. Homo sapiens" (sorry Putnam ). Text based code is monochrome, archaic and outdated and its linearity imposes unecessary constraints on the programmer that can only be (partially) overcome by wasting even more time throwing even more code at it.
Sure, a seasoned text based programmer will initially have problems adapting to LabVIEW, just because you would need to adapt to and embrace the power of dataflow and not try to make a literal translation of the text code to LabVIEW, retaining old habits. If you get stuck, come back and ask here in the forum.
You were looking for object oriented features and failed. All you need to do is a quick site search. All the information is out there. Just because you cannot find it in the first five sentences of the glossy brochure does not mean it does not exist. Maybe you want to read one of the application notes such as:
LabVIEW Object-Oriented Programming: The Decisions Behind the Design
In general, you should avoid judgement until you have all information. Your opinions seem quite biased and superficial and not really based on hard facts.
Initially you asked about the difference between signal express and LabVIEW.
hrh1818 wrote:
> What kind of measurments do you want to do and what kind of requirements do you have?
> You can also see for yourself and download evaluation version of both.
No thanks, there has to be a better way to get an answer to my
question than get involved in a two month study project.
If you would answer the first question quoted above, we could certainly help you with the decision. Isn't that the main purpose of this thread?
You can also contact your local LabVIEW Field Engineer to go over your requirements and help you make a decision. They usually know their stuff!
Message Edited by altenbach on 09-02-2007 11:51 PM
LabVIEW Champion . Do more with less code and in less time .

What are the major differences between oracle 10g and oracle express 10g

Hi
Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
Or if you know any URL, then please do let me know.
Advance Thanks
JC

Dear sir,
here it is.
http://www.oracle.com/database/product_editions.html

What are the main differences between airport express and extreme?

what are the main differences between the express and extreme base stations.

In addition to Bob Timmons' link the main differences are as follows:
Extreme has a slightly more powerful antenna (might not be true but from experience it seems to be)
Extreme has USB HDD sharing
Express has AirPlay
Extreme has 3 Gigabit ports (don't be confused by Apple's page. Apple states 4 including WAN, 3 without WAN)
Express is smaller
Express has 10/100 Ethernet whereas Extreme has Gigabit

What's the functional difference between placeholder text and regular text?

When inserting text into a project template that I'm creating, what's the difference between inserting regular text (using the Caption tool) and inserting placeholder text?
There's an obvious difference between inserting an image and an image placeholder, but when I use a project template that I've created, placeholder text and caption text behave the same way: I see the text on the stage, and double-click it to edit. So why go through the extra step of inserting placeholder text?

Textbooks are educational books for use in schools and universities and the like. They are currently avaiable for purchase only in the USA. Textbooks have different contract clauses applied to them. Among them is an obligation on the publisher to offer textbooks that are sold in electronic form via other distributors in the iBookstore as well. Textbooks also have different (much lower) pricing tiers, and they must be made available via the bulk purchasing program. Textbooks must be authored with IBA (they cannot be ePub). I believe that textbooks also undergo a more stringent review process.
Normal eBooks (not in the textbook category) can currently be sold in 32 territories (US, Canada, Australia, and most of Europe), and their pricing tiers provide for much higher prices.
There is no difference in the widgets you can use in normal books and textbooks. The same widget set that is provided by IBA applies to both. In addition, a normal eBook can be published in ePub format and, therefore, authored with software other than IBA.
Books can contain audio and video and, yes, iBooks Author allows you to create such books.
Michi.

Whats the main difference between Add-Type and [Reflection.Assembly]::LoadFrom($DLL.FullName) for example

Hello
I have a query please, if someone can help answer it
I am just not clear on when to use which method and if they need to be used together some of the time or all of the time.
Is it true to say the answer to the above is you use Add-Type when the DLL containing the type has already been loaded into memory but not yet scope of the script (e.g. like the 'using' statement
in C#)
if the DLL or its manifest is not in memory then you need to firs to load into memory via
[Reflection.Assembly]::LoadFrom($DLL.FullName)
for example?
But if that is the case do you not then need to use Add-Type once LoadFrom has loaded into memory to get the members of the type?
Thank you
AAnotherUser__
AAnotherUser__

This is a recent thread with some discussion of the differences - between using and Load/Add-Type.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9fe4c708-c98e-432e-a4e1-4a8e80250c18/how-do-i-loadreference-assemblies-in-powershell?forum=ITCG
Load and Add-Type are basically the same thing, and once the
assembly's been loaded in memory it's available, so there's no using equivalent.
I hope this post has helped!

Navigating with the mouse: Differences between iDVD 4 and 5

Similar Messages

Maybe you are looking for