Navigation and IP

I finally have my IP working. I am using it on Page 1 of a 4 page set portlet.
Each page in this set has links to the other 3 pages.
From page 1, I do some validation in the IP and move to page 2. However, after
doing that, I am getting two errors -
1. When page 2 loads, only the portlet loads, not the header, footer etc.
2. On Page 2, if I click the link back to page 1, I get the following error -
Runtime Error...
Could not find a current PortletState object for the given request.

Dear Venkat,
You can use SM12 Transaction code for Lock Management.
Regards,
Malik
If reply is useful Dont forget about the points.

Similar Messages

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Google Maps Navigation and Google Music problem

Hello,
I love the LG G2 but it has a few concerning issues. First, is the squealling, hissing, cracking, popping, etc. during phone calls, but I have seen that brought up by others.
The second problem that I've discovered, and the most upsetting to me, is that when using the Google Maps Navigation and Google Music All Access at the same time, whenever the navigation voice instructs a direction, the music shuts off. It is then silent until the navigation voice instructs the next direction OR when a new track starts. This was not a problem on my droid bionic, so it must be an LG G2 issue. This is a huge problem to me as I travel a lot for work and usually use GPS to find where I'm going, and I subscribe to Google Music All Access so I listen to music in the car. This problem makes that impossible to do (I have to choose).
A related issue, is that my Alpine CD player displayed track information (Artist, Song, Album) with my Droid Bionic, but with the LG G2 it displays 'UNKNOWN'. I find it hard to believe that a two year old phone has capabilities that a brand new phone wouldn't, so I'm hoping these issues will be fixed with a software patch.
Has anybody else experienced these issues, or does it work fine with your LG G2?

Hawaii is a part of the USA so you will be fine there. Mexico on the other hand, you will be roaming for data there and could see extra charges for international data.

I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.

Metadata Navigation and Library Column Filter Bug

To whom it may concern,
When document library metadata navigation is enabled and a user clicks an item in the metadata navigation part, the library updates to reflect the selected filter. Subsequent filtering actions performed on columns in the library do not filter the list
further. For visuals refer to the thread below.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ab5c7d15-14e7-470a-8120-71d049a104d3/list-metadata-navigation-and-columns-filters-not-working?forum=sharepointgeneral
My reason for re-posting this is 2 fold.
1. The answer to the thread above is not an answer, it is a work around.
2. Presenting the option for a user to continue filtering a view, but having that option do nothing is a bug. The option should be hidden, or it should perform the expect action.
Please either inform me of an expected timeframe for resolution, or point me to an exacting set of steps to take in order to escalate this issue to someone who will take action to fix it.
Thanks

Hi,
According to your description, my understanding is that column filtering cannot work after filtering on the managed navigation in SharePoint.
I tested the same scenario per your post in my environment, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Is there a way in 4.0 to get back button that hides navigation and bookmark bars?

I used to have Firefox version 3.6.something, and in it there was an elongated bubble at the very top right of the window which when pressed would hide the navigation and bookmark toolbars. (This button also exists at the top right corner of Adobe Reader, for instance.) It seems to be missing in version 4.0.
Is there a way to get it back (similar to how it's possible to get back the old status bar)?

Thank you, I know shortcuts are always an option but I was hoping for a more... automatic? solution. I've resorted to forcing links to new tabs that are "to other sites." It has solved my immediate problem, but still is a bit screwy.
Thank you for the help, though. :]

Document Library Template with Metadata Navigation and Key Filters

When saving a document library as a template, any configured metadata navigation and key filters columns are lost. Has anyone else experienced this issue or know a viable workaround? Can anyone shed some light on why these settings are not saved with
the template?
Thanks!
Wade Hunter MCP/MCTS - WSS 3.0, MOSS 2007, SharePoint 2010

Wade,
Did you figure out a workaround or why this happens? I am having the same problem.
Thanks

Missing "View|Application Navigator" and "View|Connection Navigator"

My default Oracle JDeveloper 10g Early Access 10.1.3.34.12 is missing "View|Application Navigator" and "View|Connection Navigator" from the View toolbar. Am I simply missing an additional installation or do I not have something configured correctly?
Thanks,
Scott

Thanks for the answer, that's exactly what it is. I'm new to this environment and had it installed for me, hence I didn't see the differences at the download choosing time. Thanks again.

I want to hide the detailed navigation and portal favorites

Hello:
    Every person in SDN!
    I find another problem in WPC.
    I create a WPC role called A.After I preview this role,I want to hide the detailed navigation and portal favorites.
    but I don't know how to do?
    Who can help me?
    lexian
   Thanks a lot!

hi,
you can do using default frame work page.
1.go in portal_content/portal_users/standard_portal_users
2.open default frame work page unclick the top_level_navigation
then you wont be able to see TLN
jayesh talreja

Search Results Web Part, Managed Navigation and Paging

I am using managed navigation and have a search results web part that uses the Term.IdWithChildren as the query to filter the results by the selected navigation term. This works nicely until you need to us the paging. As soon as you go to the next page there are
no results.
It would appear that as soon as the URL has the #k=#s=11 added it looses the navigation term. This is a core part of the Sharepoint solution that I'm delivering and I cannot progress this any further and I'm going round in circles. I have another results
page that has the search results webpart on but doesn't use the navigation term filtering and the paging works fine.
As an alternative I was looking at writing my own search results web part, can I do this and render the sharepoint display templates somehow?
Any help would be appreciated.
Stuart

Hi Stuart,
i suppose you may need to check your design regarding this custom coding,
as i know, when i tried previously, i didn't take any attention on the query result, so that it appear as no result.
please have a check this links, it helped me once,
http://technet.microsoft.com/en-us/library/gg549981.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/59e6e258-294d-44b2-996a-547e4e9f519d/customize-search-statistics-and-search-paging-web-parts
http://kamilmka.wordpress.com/2012/04/14/customize-sharepoint-search-results-paging/http://blogs.msdn.com/b/sanjaynarang/archive/2009/02/20/handling-paging-and-total-results-count-in-sharepoint-custom-results-page.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to make Navigation and Topic panes scroll independently?

Can anyone suggest how to make the default Multiscreen HTML layout navigation and topic panes to scroll independently, to accomidate a long index or TOC? Currently, scrolling toward the end of the index, for example, causes the topic pane to scroll also. Selecting an index entry scrolls the topic to the location of the appropriate content, but also scroll the index, taking the selected entry out of view. I would like independent scrolling of nav pane and topic panes.
I'm using RoboHelp HTML 10, FrameMaker 11, TCS4.
Thanks you.

Your post has been moved to the Multiscreen forum. That does not change the link.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

BI 7.0- Filled Cube- Change Attribute as NAVIGATIONAL and for BEX

Hi,
We are on BI 7.0.
I have the following task:
Making an Attribute NAVIGATIONAL and making it available in the BEX for a Filled LIVE Cube.
Questions:
1. Is it done through Remodelling or is it just change the attribute to NAV and add the Attribute under NAV attribute while creating Cube? As said above this is a live cube with data in it.
2. Does it need any other adjustments or steps after this point.
Steps to make a Attribute Naviagtional :-> Need Verification-
1. Change the Attribute from DIS to NAV in InfoObject maintenance.
2. I know there is the second step to add NAV attribute in Cube. I am doubtful, can someone confirm. Under the InfoCube-> Change, add the attribute under NAV Attributes.
Will appreciate your replies.
-TC

1. Is it done through Remodelling or is it just change the attribute to NAV and add the Attribute under NAV attribute while creating Cube? As said above this is a live cube with data in it.
no need of remodeling, do it normally
2. Does it need any other adjustments or steps after this point.
activate yr Infoobject (its not gonna impact yr data modelling at all because NAV or Display setting is set for BEx)
Steps to make a Attribute Naviagtional :-> Need Verification-
1. Change the Attribute from DIS to NAV in InfoObject maintenance.
2. I know there is the second step to add NAV attribute in Cube. I am doubtful, can someone confirm. Under the InfoCube-> Change, add the attribute under NAV Attributes.
actually u could make attribute NAV in cube only when if its set so at infoobject level otherwise NAV checkbox wont be appeared in edit mode in infocube

VZ Navigator and GPS Not working in East Texas

My phone and my wifes phone (both TB) are experiencing the gps outage in East Texas.
We live in Henderson, TX which geographically lies between Tyler and Carthage.
I have called Verizon repeatedly with little to no help so far. I have been told by customer support many times that Verizon does not support 3rd party gps apps like Google Maps or My Tracks; however, I'm not able to get VZ Navigator to work either.
After calling customer support and being reminded that they do not provide support for Google maps, the rep asked if I was able to use VZ Navigator. I quickly installed VZ Navigator while trying to communicate the real issues at work in our area of
Texas. Once VZ Navigator was installed, (yes, I agreed to the $10 per month) I opened the app to discover all the same issues. VZ Navigator doesn't get a gps fix. It just says, "Updating location..." and when you try to navigate to any destination from your current location, it says "Getting GPS..." until it returns with an error message. The error message reads "VZ Navigation is having trouble finding your current position. Please try again. (1001)
Once the 2nd level tech verified that I actually installed VZ Navigator and that was not able to make it work, she notated all I had to say about the gps issues and escalated the open ticket to a higher level engineer. She said I should get a call
tomorrow (05-16-2011).
She said the key to getting the issue escalated was VZ Navigator. It's not free. It's a Verizon product. She also stated that I can
stop the service once the issue is resolved. I encourage everyone living in East Texas with this issue to do the same. It's worth a shot!
I will keep everyone informed of my progress (or lack of) as time passes.
If anyone has a solution to the GPS outage in East Texas please post a reply.
Links to other forum discussions about the East Texas GPS outage are found here:
http://forum.xda-developers.com/showthread.php?t=1035665
http://www.droidforums.net/forum/droid-general-discussions/143008-gps-outage-east-texas.html
Please help!

I have always thought this was a GPS issue.. but i only use the free apps..    i complained enough to get 2 months credit for VZ Navigator..   guess what..   it uses the same gps chip in the phone and it doesn't work either. supprise supprise supprise.
How many weeks does it take?
As for Google updating a database..    in airplane mode, GPS still works...   or used to.. ...   i have done it many times.
Why does Google have to update something that works in airplane mode when all the transmitters in the phone are turned off? makes no sense at all..
fix your service or credit me something for the services you are not providing till you get them fixed!!!
It's been weeks and weeks and weeks guys..   COME ON!!!!

How make the Top-level Navigation and Content Area in one page as a whole?

I want to make the Top-level Navigation and the Content Area in the one page as a whole displayed in user interface.In the default framework,the Top-level Navigation and the Content Area were contained in 2 pages, So the vertical scroll bar could only control the Content Area. I want to control the full page with one vertical bar like the page of "www.sdn.sap.com" Web.

Hi Jianguo,
One advantage of the external facing portal solution (SP14) is that the framework page is displayed in a single frame. Perhaps this could be of use to you.
Hope this helps.
Daniel

Default Detailed navigation and Portal Favorites naming and sections

Hi,
I want to manipulate the 'Detailed Navigation' and 'Portal Favorites' on left side menu of my manuscreen. I want to rename them and manipulate to add my own iViews fixed iViews under the Portal Fvorites.
Now, I do find the Portal favorites default iView under ortal menu Content provided by SAP - end user content - Standard Portal Roles, but it is an iView, and I can't add iViews to an iView.
I don't find the default Detailed Navigation iView nor page.
Does anyone know how I can change these settings to fit my menu, without having to create a pop-up page?
Kr,
hilde

Hi,
To fine the Detailed navigation iview:
Goto Content provided by SAP >end user content>standard portal users>Default framework page>open Desktop innerpage-->here you see detailed navigation iview..
Change the name of the iview goto iview property-->Change the Name property...
Add ur iview in to the role & open it.. It will open in the content area then add this iview to portal favorites..click on the right top corner menu & select Add toportal favorites...
Regards,
Senthil K.

Why hasn't Adobe navigation and user interface design improved as much as it could have over time?

I haven't tried CS6. I'm sure it's great based on what i've seen alone. But as a user of adobe products for a number of years, i have to noticed there are still a lot of stagnant,awkward, stiff, irriating, slowing down elements found in the navigation and user interface on cs3-cs5, that i'm sure could have been eliminated or improved on at least from 2005 or 2007 onwards. I find some of these things inexcusable and unprogressive from bad traits that defined 1980's and 1990's general computer navigation and so on.
CS5.5 has lessned this a bid bit and is more fluid in bits and pieces but for those using cs3-cs5 and in general, i find some things just horrid. As a graphic designer no one is supposed to admit the flaws or irrations of these programs. We must hail them as god, never critisize, and always adjust to new things which i think is a bit fascististic and silly
The way the tools, options are laid out can be improved to be quicker, and easier to find and use. Using your voice as a commanding system would be helpful as well.
A lot of cmds are too complex to remember, they can be simplier or resemble the name of the tool or option. Its makes a chore to follow this system and competition for the smart *** who memormized all the cmds.
The way in which you loose floating side boxes, and the amount of tools or names hidden in the bars sometimes seem random and its always a constant search to find them incase you forget where they are.
The inability to open cs4 or 5 files in cs3 is just beyond extremly annoying. Whey shouldn't you be able to open cs1 or 2 files or photoshop 9 files as well? Every five years work expires as well?
The layering system gets tricky and seems that a lot of things don't work when you normally move things. Its about going back, remembering and clicking on this or that, looking it up to make everything work. Sometimes which leaves you in a rut and wastes a good amount of time. You will always find this even after you've been using it for years.
The use of the fill paint/airbrushing, clone tool, lasso tool, pen tool, history being two steps back can be vastly improved to be much better to use
Masking and tools that have more complex features should find a way be automatically done or sampled. They can also have less complex steps and tha ability to be previewed, automatic or simpler ( in case you can't remember how to do something or aren't getting it)
A lot of the special effects, and blending modes are useless, outdated, super-ugly and don't resemble true darkroom effects ( such as polarization, and bas-relief for example) which they could much more vividly done. There also could be more options that are closer to repro cameras/CTP software for halftoning and more complex digital effects.
Having to press or get used to pressing muliple keys or clicks for the most basic things simultaneously can be reduced to be easier
Adjusting text, new documents, photos should have a smoother, quicker navigational experince where things a lot of room to be , clicked back, re-done, saved in the wrong place etc..
Indesign could use more shapes, include more features that illustrator has, and possibly even photoshop to save time.
There should be a way to remind you of features, complex things you've forgotten, other than history and daily usage/practice of the programs
The help should resemble more of "visual -learners" guide books with voice features.
There are a lot more
Regarding other things:
I think the price encorages more piracy and allows people to not have a concept of what is means to owning software.
The loss of a manual or lessening of them for certain programs is a loss because it's always useful to physical info you can flip through while looking at your program.
I think adobe should make entirely better products for professionals or people in the industry rather than spoonfeeding the same software to all.
They should also make less expensive add-ons like before for graphic software.
What do you adobe could have improved over time and if so what do you think they could have improved on?

You have this wishform to suggest improvements to Adobe products:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
and the Creative Suites forums are here:
http://forums.adobe.com/community/creativesuites
This specific forum is only for discussions on the forums themselves, so you are not very likely to get any change by posting your comments here.

Navigation and IP

Similar Messages

Maybe you are looking for