Navigation attribute in a InfoCube

Hi Experts,
Question: No Values for Navigation attribute in the report that has InfoCube as InfoProvider.
I have a requirement to include a new feild as navigational attribute in a Characteristic.
So, i create the InfoObject IO1 . Assign it as a Navigational attribute to InfoObject IO2.
Now, in the Infocube, there is a setting under the Navigation attributes (On/Off) i check on it.
Now, in the query i add IO1 as attribute for IO1. So that when the query is run IO1 values will be displayed.
But unfortunately no values for IO1 are displayed.
Cross check i did:
For the InfoObject IO2 there are other InfoObjects as attributes IO3 & IO4.
Now when i include this as attribute and display there are values for IO3 and IO4.
I can understand there is some setting i have missed.
Can you please list down all the steps to display the new InfoObject IO1 in the report.
Thanks,
Suraj S Nair

Hi,
Yes i have done that too.
In InfoObject IO2, i can see values are populated for IO1.
IO2      IO1
A         A1
B         B1
Now, in the report i have IO2 values (A & B).
So, attribute IO1 that is (A1 & B1) should be displayed for the respective IO2.
Regards,
Suraj S Nair

Similar Messages

  • Navigational Attribute in Reporting

    Hi experts,
    Suppose I have created one attribute as navigational attribute in my infoobject characteristic.This Characteristic is in Infocube.
    Now after executing query on this infocube,Can I drilldown from thic characteristic to Navigational attribute to analyse my results more?To achieve this,is it necessary to Switch On my navigational attribute in Infocube?or Can I achieve this even without switching navigational attribute in my infocube?
    rgds,
    P Olin

    Hi experts,
    Thanks for your replies.
    Suppose if I donot want to create Navigational Attribute,how can I do technically,so I can drilldown to this characteristic from my original characteristic infoobject in the report to see more analysis...
    I am thinkiing of creating hierarchy manually from top to bottom by creating one characteristic and adding it as 'external characteristic' in hierarchy tab of my infoobject characteristic which has this hierarchy..Is this an option?Can I still drilldown and see detailed analysis in my reports?
    Thanks for your replies.
    P Olin

  • Unable to add Navigational attribute in Qery

    Hi All,
    Am a beginner in Bex queries. I need to add a Navigational Attribute, in a BEx Query.  I did the following:
    1.  Turned ON the Navigational attribute in the Infocube.
    2. As my query is on Multiprovider, i had mapped the specific field as well.
    3. In the query, the 'Attribute' folder is added to the particular charcteristic in the infoprovider panel. When i try to drag to the navigational attribute into the 'Free Characrteristics', its not working out.
    Am not sure about the procedure for adding the Navigational attribute into the Query. please help me in resolving this.
    Thanks,
    Chitra.

    Hi Chitra,
    Check if the navigational attribute is already there in Rows or filters area. it can't be in 2 places at a time.
    First make sure the Attribute is navigational enabled at info object level.
    Enable the object as navigational at IC level.
    as you are using MP... you need to enable the navigational attribute in the MP and identify the object then you will be able to use the navigational attribute in the query.
    Regards
    KP

  • Navigation attributes in Updates Rules.

    Hi,
    I´d like to know if it is possible to use a navigation attribute of one InfoCube in the update rule of other InfoCube. For example, i am trying to consolidate some date using the 0Customer attibute 0City, but when i create a new update rule to my InfoCube the only object avaible is 0Customer, its navigation attribute (0City) is unavaible in the Update rule.
    Thanks.

    Hi Luiz,
    check the "Master Data Attribute of" update method in the help link below and see if it does what you need:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a64e0e07211d2acb80000e829fbfe/frameset.htm

  • Performance - navigation attributes

    Hi,
    we have a very bad performance with our reports, because we use many navigation attributes. So I want to disable those we don't need.
    My question is: Do I have to delete the nav flag in the InfoObject where this navigation attribute was created or is it the same effect for a better query performance when i only disable the navigation attribute in the InfoCube and in the MultiCube (and keep it in the InfoObject active)?
    thx
    Robert

    Hi Robert,
    You only need to remove the nav attr from being used in your queries. If it is difficult to control that (due to many users creating their own queries) then you can uncheck the Nav Attr in the cube or mulitprovider. No need to change it at the InfoObject level.
    Hope this helps...

  • Navigational Attributes in InfoSets[based on InfoCubes] - BI 7.0

    Hi Gurus,
    I am using BI 7.0. We tried creating a MultiProvider based on three SD Cubes[Orders/Billing & Delivery] but since the result was being displayed in 3 rows instead of 1, we tried using an InfoSet to see if this would get the results to be displayed in a single line.
    In the MultiProvider, we had mapped some of the 'Navigational Attributes' from the underlying InfoCubes after turning them 'ON', but in the InfoSet, I am not able to view the Navigational Attributes of the Cube anywhere.
    Are we not able to add 'Navigational Attributes' to InfoSets? Is there a work around for this?
    Thanks
    Arvind

    Hi Arvind,
    Check note 1124036 @ www.service.sap.com . Check if you need to apply this.
    Also you can add infoobjects themselves in the infoset and join them by keys.
    Regards,
    Sunmit.

  • Navigational Attribute, no data in infocube.

    Dear all,
    I want to have navigational attribute for my infoobject 0orgunit which is an attribute of ZCREATOR. Here are the things which I have already done.
    1.     In my infocube, I have navigational attribute checked under characteristics.
    2.     In my infoobject ZCREATOR, I have navigational attribute as type NAV and not DIS under the attributes tab.
    3.     Query again the master data and have manually run the attribute change run.
    ohya, ZCREATOR is a reference characteristic of 0BPARTNER.
    Anyway, in the infocube, when I load my data, the blue column which represents navigational attribute is empty. Is there something I’m doing wrong? Please advice and thanks in advance.

    1. how do i populate the blue column in the infocube then? whats the use of it when no daa will get populate.
    You cant populate unless you derive the values in the update rules/transformations. The advantage of using nav attributes, is not to derive values on the cube level but will be able to use it on query level. If there will be a change in the masterdata, you need not go back to realign the data inthe cube if u r using nav attribute, as it would always read from the updated master data table.
    2. in my query, i am using this charcteristics ZCREATOR__0ORGUNIT do display my navigational attribute, but still no data is available. its display empty field in the column.
    a few checks:
    is the nav attrribute available as a char in the query designer?
    if so, when you expand the char, and click on the values - do u see any values?
    if not the master data is not available.

  • Infocube design - Navigational attribute

    Hi Gurus,
    0ASSET is my characteristics and ZLOCCODE is a navigational attribute of 0ASSET.
    In infocube , the ZLOCCODE is defined in dimension and as well in navigational attribute. So , gurus could you please explain why we need to define the ZLOCCODE in dimension and in navigational attribute.
    What is the use of it?
    How the data will differ?
    Thanks in advance.

    Hi Vaish,
    Here we have two cases.
    --> Use ZLOCCODE in cube Dimension and populate its value by 0ASSET master data
    In this case ZLOCCODE value is populated from 0ASSET master data at the time of data load.
    --> Use navigational attribute ZLOCCODE in Cube
    In this Case ZLOCCODE value is the currect 0ASSET master information
    Yes, both value can be different based on business logic.
    EX.
    You have loaded data in Cube on 01.01.2011
    at that time for Asset 'X',  ZLOCCODE value is 'A'.
    So cube will store ZLOCCODE = 'A'
    but on 01.08.2011
    ZLOCCODE value of Asset 'X' is changed to 'B'.
    in this case if you see Value in Query today then you can see Cube dimension ZLOCCODE value ='A'
    while nav attribue ZLOCCODE value = 'B'.
    Kindly note that not all the master data can be change, some of the master data value is always fix.
    For Ex. Employee Gender never change so if you see Nav Attribute or Dimension Gender then value must be same.
    Regards,
    Ashish

  • Can you please help me reg Attributes addtion to infocube

    Hi All ,
    Can you please tell me , When we add display and navigational attributes to existing infoobject of infocube in the development system, I have done all the markings in the infoobject level and also Infocube level . But when iam transporting the objects in the order ( Info objects , Info cubes) to Quality system . Navigational attributes ( Check Box is not ticked ) are not reflected in the quality system .
    And one more thing there are aggregates for the infocube , which i made changes ( Adding of attributes) in the quality system . Does this make any diff .......
    Please revert me ASAP ................
    Thanks for the help in advance ................
    Thanks
    phani
    Edited by: Phani T on Oct 16, 2008 8:10 AM

    Hi Phani,
    And one more thing there are aggregates for the infocube , which i made changes ( Adding of attributes) in the quality system . Does this make any diff .......
    --> Yes it makes difference. As you are changing CUBE by adding navigational attributes.
    Try to deactive/switch off aggregates and reimport request and check. And also transport aggregates.
    Hope it Helps
    Srini

  • Variable entry from Navigational attribute

    Hi,
    I would like to let the user of a web query enter a value for a navigational attribute of a characteristic in the variable screen. How do I create variables based on nav attributes?
    Example:
    The report shows 0MATERIAL with key figures. The user should enter a Division (Nav attr of 0MATERIAL) before entering the query.
    Best Regards
    /Daniel

    Hi Daniel,
    In the infoobject maintenance of 0MATERIAL, Make sure the attribute Division has NAV property instead of DIS in the column Navigation Type.
    Then, Have you switched on the navigational attribute in Infocube.(Modify Infocube >>Nav.attributes)
    After doing these two steps you should achieve what you are trying for.
    Anil

  • How to change an characteristic to an navigation attribute?

    Hello everyone!!
    Does anybody knows how to change a characteristic that is on a POS to an attribute navigation of another characteristic that is in the same POS without deactivating it?
    An infocube has the same POS characteristics. So, if I do this modification, the infocube will be automatically chaged? I think not, but I want to avoid manually changing almost everything.
    Thanks in advance!!
    Regards

    Hello Heidi
    Sorry if I took so long to answer.
    Unfortunately you will have do deactivate the POS and of course change all the infocubes, infosources, etc, that are involved with this change. If you deactivate your POS, all the CVC´s are eliminated, so it will be better if you backup all the data in your live cache in an backup infocube.
    When you change the characteristic to an navigation attribute and also change the infocube, the data in the infocube will adjust automatically. You will have to create the CVC´s again with the new "format". But in the infocube, it won´t be necessary.
    I hope it helps.
    Best Regards
    Angela

  • Can i filter a report based on a value of a navigational attribute?

    Hi all,
    i need to filter a report and the characteristic i need it's a navigational attribute that is already present in the infocube, can i use it as a filter or i need to add a new characteristic to the ic?
    thank you

    Hi
    You can use navigational attributes to filter your report. When you switch on the navigational attributes at the cube level, the X table or Y table will be connected to the star schema of cube.
    Navgational attributes behave like a characteristic in the report. You can create variables, filter etc on navgational attributes.
    Hope it helps.
    Regards
    Sadeesh

  • Authorization for navigational attribute

    Hi Gurus,
    I am facing an authorization issue with respect to infoobject hierarchy. I have created authorizations as below.
    There one infoobject 'A' and a navigational attribute 'B' in infoobject 'A'. This navigational atribure A_B is used in an infocube.  And hierarchy is uploaded to Infoobject 'B'. Now I want to give authorization for this hierarchy in infoobject 'B'.
    Now coming to authorization.
    1. I have made Infoobject 'B' as authorization relevant in Business explorer tab.
    2. Created authorization object say ABC in RSSM and inculded infoobject 'B' & 0TCTAUTHH (since I want to authorize the hierarchy and we are using 3.5 authorization concepts in BI 7.0).
    3. Activate this authorization object for the infocube.
    4. Included this authorization object in the role included for my user. In the field 'B' of authorization object I have given ' ' (space) and in the field 0TCTAUTHH I have given the technical name of the hierarchy.
    4. In 3.5 query designer I have put this navigational attribute A_B in the filter area and activated the hierarchy in the properties tab for the same hierarchy that I inculded in previous step.
    5. Created a variable with processing type authorization.
    Now when I run this report I get an error as no authorization for object ABC.
    Can someone help me if I have done anything wrong.
    Thanks,
    Sandeep

    Hi,
    In the infoobject A maintenance screen check the chekc box for field "AuthorizRelevant" for B to make it authorization relevant navigational attribute.
    Then go to RSECADMIN and ope your relevant authorization.
    In the menu bar just above the "Authorization Structure" you will find the button with icon of infoobject.
    Chick on this icon this will give you a screen to enter characteristic name of which attributes are to be added to authorization.
    Enter the infoobject A name here and click on continue.
    This will give you list of all authorization relevant navigational attributes present for A.
    Add B from this list to the authorization.
    Hope this helps.
    - Geetanjali

  • Navigational attribute Vs normal infoobject in Query

    Hi
    I have  some infoobjects named ..1)ITEM....2)STATUS....3)SALES etc in cubes...
    I have to design a query showing this data...the report should show Item Status also...I can use normal infoobject STATUS from infocube in report to show Item Status....I have one more possibilitySTATUS is added as navigational attribute of infoobject ITEM..So I can use this navigational attribute also..which one should I use normal infoobject STATUS or navigational attribute STATUS of infoobject ITEM to show item status in report?how to decide on this?
    Thanks for your guidance.

    Hi Hayward,
    Status as direct Object
    When you use Status as an object added in cube you get the data of the day the cube was loaded. Let say for example your cube is loaded weekely on sundays, so the field status will give status as on sunday, even when it is run on other subsequent days of the week. So as correctly pointed in above posts values you get in status are not real time but historical.
    Status as Navigational Attr of Item
    When you use Status as Navigational attribute of Item then you get current data because in almost all cases Master Data Objects are loaded on daily basis and thus it picks the latetst Status of Items.
    In case your cube is loaded daily then it won't make much difference that whether you are using it as a standalone object or as navigational attribute of Item.
    Hope it helped
    Regards
    Raj Rai

  • Navigational attribute in selection screen gives no applicable data

    Hi Gurus
    In the report i am using the navigational attribute in the selection screen.e.g Brand (attribute of material)
    My problem is whenevr i enter value in the navigational attribute (brand)  in the selection screen and execute  its says no data found.
    If i do not fill this parameter and fill only the parent attribute (material)  in the selection screen  , then i can see the results and from its properties  (drilling down )i can see the values of brand .
    If the values of brand exist why via selection screen its not giving vales, However Via material i can drill down and see brand values.
    I have done all the necessary steps to make this attribute as navigational.
    On top of this i have this same navigation attributes as one of the characterisitc in the cube.
    Thanks
    DD

    Hello,
    I've the same problem... for new nav. attributes for 0Material.
    Settings for nav. attibutes in BEx Q.D. are OK.
    But in BEx Analyzer:
    1- not display all values for this attributes. Some values are displayed, some don't.
    I try display it with and without selection screen.  The result is the same.
    2- I try to display (normal) attributes - not nav. In this case everything is OK.
    But I've 2 columns: normal attribute for all values and nav. attribute only with some values...
    (the query is something like: 0Material + 0Material_NOTnav_attr + 0Material_NOTnav_attr)
    It isn't a normal...
    I don't know... Maybe it's depend of the time?
    I can't clear all master data for 0Material, because they're used in some cubes. I had old characteristic without nav. attr. but with master data. I added nav. attr. in 0Material and activated it. Next I load master data (full method). Then I added nav. attr. in infocube, activated it, delete and load data into the cube (Init + Delta).
    If I display data for the cube in RSA1, I can see nav. attr. for all records. I can't see it in BEx Analyzer...
    Can U explain it?
    Thx,
    MSzN

Maybe you are looking for

  • What is the simplest way to make and upload video to YouTube?

    I'm a video novice trying to figure this out. We want to start making short customer testimonial videos and upload them to YouTube as part of a social media marketing campaign. I want to come up with a solution that is fast and easy, takes as little

  • Reports developed in SSRS 2008 r2 cannot be uploaded to SSRS 2008

    Reports developed in SSRS 2008 r2 cannot be uploaded to SSRS 2008 ERROR ON REPORT MANAGER: The report definition is not valid. Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/re

  • How to read specific lines from a text file using external table or any other method?

    Hi, I have a text file with delimited data, I have to pick only odd number rows and load into a table... Ex: row1:  1,2,2,3,3,34,4,4,4,5,5,5,,,5  ( have to load only this row) row2:   8,9,878,78,657,575,7,5,,,7,7 Hope this is enough.. I am using Orac

  • Error 150:30 "Licensing has stopped working" ??

    Hi - When opening Photoshop CS4 I get the above errormessage. I have downloaded the  LicenseRecovery Launcher, but Mountain Lion Mac OS X Version 10.7.5 does not support PowerPC programmes  - so I am stuck. Please advice what to do. Thanks

  • Making My QT movies look as good as my FCP canvases

    Using footage from my Sony HDV camcorder (which records in 1440x1080 (1080/60i)), my sequences in FCP look gorgeous and truly High-Def. But when I try to convert to a QT mov, they look terrible -- pixelated, staggered, ... What is the best method to