Navigation Attribute is not getting displayed as in Masterdata Table

Hi All,
I have an infoobject "YDOCUMENT" compoundedd with "S_ORD_ITEM". Also i have added few attribute (Reason for rejection and Order Status) for the same. This infoobject is getting updated through data load from Sales Order Item level DSO and it will contain the Reason for rejection and ORder Status for each Sales ORder and item combination.
After performing the data load i am able to see the attribute successfully getting updated into the master data table as expected, But when i run the Bex report and disply these Attributes as Nivugational Attributes, I am gettign the value as "Unassigned, and i am getting the proper result from the infoobject master data table.
Can anyone give me any idea why this is happening? How we can i fix this issue?
Thanks,
Muruganand.K

Hello All,
The issue is due to the SID generation failure for the Attribute, This didnt happen properly because i am inserting the records into the infoobject during the data load to another DSO.
Now i am doing a Direct data load to the infoobject to update the attribute this is solving the issue.
Regards,
Muruganand.K

Similar Messages

Navigational Attribute is not properly displaying

Hello,
We have a "Sales Group" navigational attribute YCUST_SAL-YSALE_GRP in a BW report. We have adjusted a sales group for a customer in R3 from F10 to E49 and hte same has been pulled to BW side,.
we have activated the master data manually and we are able to see the new data is available against the customer.
But when we refresh teh report, for that customer we are able to see only F10 as the sales group,.
For cross check, we have sales group display property also. where we are able to see E49.
Please let us know why we are seeing inconsistency between display and navigational attribute for a same infoobject.
Thanks. Karthik

Hello,
It seems Master data is not activated properly....
Whether the query is fetching data from Aggregates, if so you have to do Attribute changerun for this infoobject
goto SE38 and run this program RSDDS_AGGREGATES_MAINTAIN it will Info object name...Provide your info object and execute...
Your problem will solve.
Regards,
pavan.

Attribute AgentUser not getting displayed

I m trying to configure OIPM
1. Access the Oracle I/PM domain in Oracle Enterprise Manager 11g FusionMiddleware Control at the following URL: http://localhost:7001/em
2. Log in as the Administration user (for example, weblogic).
3. In the navigation tree, expand Application Deployments, and then click the imaging application.
4. On the Application Deployment menu, select System MBean Browser.
5. On the System MBean Browser page, close the com.bea folder under Configuration MBeans.
6. Expand the oracle.imaging folder under Application Defined MBeans.
7. Expand the Server: <server_name> and config folders. The default server name is IPM_server1, but it can be changed when installing I/PM, so ensure you are
configuring the correct server.
8. Click config.
however I do not see the attribute : AgentUser... Is there any specific way in which this attribute is enabled.

There is no need for AgentInput user id as the system will use the logged on user id. The documentaton is incorrect.

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Values are not getting displayed in screen

Hi Experts,
I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
BDC and LSMW is not working for this t-code.
Please help me out.
Thanks and Regards,
LOGU

Hi,
i think you have not released the objects to repository. test and try again..
thanks
karthik

Graph image not getting displayed when navigating from another page

Hi All,
I have implemented a line graph in ADF with "dept no"(in x-axis) and "avg sal"(in y-axis). When I am going to run only this graph page, its showing proper data.
But,when I am trying to navigate from another jspx page (which is under some package) to this graph page, the graph is not getting displayed(graph image is not getting displayed).
In my project I am following package structure for jspx and backing bean.
Please help me to solve this problem.
Thnx,
Abhijit

Abhijit,
A couple of things:
1). There's really not enough information provided to answer your question - have you tried doing some debugging?
2). You may have beer luck on the [url http://forums.oracle.com/forums/forum.jspa?forumID=381&start=0]11g forum
John

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Component is not getting displayed in process scheduler menu

Hi All,
I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
I have registered this component with below details:
Menu Name : PROCESS_SCHEDULER
Bar Name : PROCESS
Folder Name as PT_PROCESS_SCHEDULER
Select “Always Use default local node?” Check box
Permission List : PTPT1000
But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
I am surprised why another component registered with same details is not getting displayed in process scheduler menu.

Thanks Michel,
I got this problem resolved. Here is what I did:
Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
Cleared browser cache, accessed the page again and saw the link was available.

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

Condition tab in STO is not getting displayed

Hi,
While creating STO, the Condition tab in Line Item is not getting displayed.
Why it is not getting displayed? Where do I need to change the configuration?
Do I need to maintain any Pricing Procedure in MM?
Please guide.
Regards,
PK

Hi,
Check whether you have maintained Schema determination for respective document type and STO.
below mentioned is the navigation path to maintain the same.
> spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
Standard Pricing procedure for STO is RM2000.
Hope this is helpful..
Regards,
Vamshi

Entitlements not getting displayed in Entitlements Tab - OIM11gR2

Hi Experts,
I am trying to provision entitlements to users by requesting entitlements. When i successfully provision entitlements, the entitlement is getting displayed in accounts tab, child form. But the same is not getting displayed in entitlements tab of the user.
Please kindly guide me
regards

Verify below steps:
1. Marking Entitlement Attributes on Child Process Forms
http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/appinstance.htm#CHDFFEEE
If you have already marked it then fine. else create new version of form and add property Entitlement=true. activate this . make sure the parent form having the latest child form. goto parentform->child tab and verify the child form version.if not create new version for the parent form and activate this version.Automatically it will pick the latest child form
2. Run Below scheduled task
a. Entitlement List scheduled task.
b. Entitlement Assignments scheduled task

Navigation Attribute is not getting displayed as in Masterdata Table

Similar Messages

Maybe you are looking for