Navigation back and forth between anchor points with "prev" and "next" buttons?

Hi all,
I am working on a horizontal layout site that has anchor points on each part. As the user scrolls, it snaps to each anchor point. It works fine with just the mouse wheel, but I'd like to have previous and next buttons that allow for easy navigation between the points. I know on each section I can have the buttons to jump from say A>B>C and then C>B>A, but this is a single "prev" and "next" set of buttons that are pinned to the page. So, as the page scrolls left to right, the buttons stay put. Is there a way to just have them go to the previous and next point in the line, rather than linking a button to anchor point A/B/C, etc?

I'm not sure I'm making my question very clear. Your response doesn't address what I'm asking, unfortunately. I know how to make buttons that are linked to individual anchor points. But I'm trying to make buttons to link to the next anchor point, or a specific spot on the page. Think of how you would navigate on a horizontal page, that's what I'm looking to duplicate.

Similar Messages

Problem with Back and Next Buttons: a solution?

Hello,
It is well known that including the Back and/or Next buttons in Captivate quiz questions presents real problems. I have come up with what I think to be a solution. It should allow one to include both Back and Next buttons, if one wants to do this. It involves doing the following:
With Question 1, do not include a Back button. (This is so that the quiz-taker cannot get out of the quiz scope in the forward direction.)
Create this advanced action: If cpQuizInfoTotalUnansweredQuestions = 0, then Go To The Next Slide (i.e. the results slide); Else Continue.
Insert a slide after the final question (and before the results slide). On this slide, include the following:
A message to this effect: ‘You have not answered all of the questions. Please go back and complete all of them.’
A button labeled ‘Return to Questions’ (on success: Jump to slide with Question 1). But include no other buttons. That is, if the quiz-takers lands up on this slide, he or she has only this option.
On Enter (i.e. on entering the slide being described here), Execute Advanced Action = the advanced action described in Item 2 above.
Now for something odd. Before the slide described in Item 3, insert a slide with a Text Caption with variable $$cpQuizInfoTotalUnansweredQuestions$$. Keep the slide as brief as possible (something like 0.5 sec.) and make the text of the Text Caption invisible. And why all this? Because I found that, without it, problems arose quite regularly. If one or more questions were not answered, the quiz-taker would come, as expected, to the slide described in Item 3 above. The quiz-taker would then go back to complete the unanswered questions. But then—sometimes—the Item 3 slide would still appear, even though all the questions were answered! The quiz-taker would return once again to the questions (since this is the only option available), only to find that now none of the questions were answered! And at this point, there was no escape: the Item 3 slide would always appear no matter what one did. Why should inserting the additional slide described in the present item solve the problem? I don’t know. All I can say is that (1) without it, the problem arises often (though not always), and (2) with it, the problem hasn’t occurred yet, even though I’ve done lots of testing.
Final note. It will be clear that this solution is meant to be used together with the option Allow Backward Movement. Will the solution work with Branch Aware? I don’t know yet. Will it work with Question Pools? Again, I don’t know yet. I’ve only done a bit of testing in both cases. The results thus far indicate that at least one of these options presents real problems. Both might.
I’m still testing this solution (or what I hope is a solution). If anyone else wants to try it, I’d be interested in hearing how it goes.
Best regards,
Marvin DuBois

Dear Lilybiri,
Thank you for your response.
1. 'I don't get it why you don't use the Submit All option?'
Submit All is fine in some cases. But it limits the options: the quiz-taker does not get immediate (question-by-question) feedback. So where immediate feedback is wanted, the Submit All option presents problems.
2. "Why do you need a Back button . . . ?'
a. The Back button is needed during Review. Otherwise, the quiz-taker can only review in one direction.
b. In some quizzes, the quiz-taker should be free to go back, whether to check earlier question slides (since the questions and/or responses can be relevant for the current question) or to re-read/re-hear information slides inserted between question slides.
But the more general issue is this. The Cp Back and Next buttons provide us with possibilities, with further options. Workarounds are available, such as not allowing backward movement and placing a Clear button over Next. But these workarounds limit the possiblities, i.e. the possibilities that are there—i.e. that Adobe puts there. It's not that we always need these possibliities. But neither should we be hindered from using them if we so choose—and especially when we would be hindered simply because Cp doesn't work as well as it should.
Kind regards,
Marvin

View Navigation (Back and Next)

Hi Experts,
Are there any alternatives to using plugs for view navigation in Web Dynpro?
We have an application which consist of a number of views, each with a 'back' and 'next' button that loads another view. Problem is - depending on choices made on the views, the next and back buttons need to navigate to different views. This means that we have to create separate plugs and links for each possible destination. Even worse, we have to keep track of which view was loaded before the current view, as the back navigation differs.
If I can maybe illustrate our problem with this example:
View1:
InPlug1(Back from View3 after navigating to it from here)
OutPlug1 (Next button with option A)
OutPlug2 (Next button with option B)
View2:
InPlug1 (Next from View1 with option A)
InPlug2 (Back from View3 after navigating to it from here)
Outplug1 (Next button)
View3:
InPlug1 (Next from View1 with option B)
InPlug2 (Next from View2)
Outplug1 (Back after navigating from View1)
Outplug2 (Back after navigating from View2)
For this simple setup we need 10 plugs and we need to keep track of which View navigated to View3. Is there a simpler way or maybe something we could do different somehow?

Hi,
Please go through this tutorial.
It explains how you can pass parameter inside the fire plug and how you can navigate to a view of your choice from a list of views.
It does not directly address your problem.But then this is possible solution with some intelligent coding.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#4">Navigation using Interface view</a>

How do I position the back and next buttons in a full screen lightbox

I'm working on a portfolio website, and it has five sections (each section is 1440px wide). I am trying to put in a full screen lightbox for some images. When I adjust the settings for the lightbox, I am just keeping the Back and Next buttons. However, when I put the buttons in one place, they either appear in a different position in the browser, or just don't appear at all. Maybe there's a technique I am missing with regards to putting the buttons in a place most computer browsers will be able to find it. (Pictures of the problem are below, and they use the sample pictures for the slideshow, but it doesn't make a difference what pictures are in there.
Muse document. The arrows are pink and can be seen on the left and right sides.
Web Browser Preview. No arrows, even though they're in the Muse document.

I see that you are using a long page with slideshow in lower section of the page. Navigation arrows are placed around 3200 , so when you will scroll the page down you can view the next and previous buttons.
Try to change navigation arrows and then check.
Thanks,
Sanjit

Navigation "Back" and "Forward" buttons are inactive, they do not work at all. How do I fix this?

I have downloaded the latest version of firefox and the navigation buttons in the browser will not work in any way. The "Back" and "Forward" buttons are completely un-usable.

Toolbar misbehavior could be due to a problematic add-on (e.g., theme or extension), or a corrupted settings file. Next time you upgrade -- and for security reasons, it is highly recommended -- try Firefox's Safe Mode to see whether you can pin it on an add-on or custom setting. You also could clear your toolbar settings.
More info on Safe Mode:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
Does the toolbar work correctly?
More info on clearing toolbar settings: [[Toolbar keeps resetting]]

Single Frame with Back and Next Jbutton support for Swing

Hi All,
I need a help regarding to th JFrame.
I have to design a tool with Back and next button with a single frame. With Next button action i should move to a new Frame content and with Back button i should back to the previous one.
How should i proceed?
Thanks a lot in advance.

1) That's a Swing question. There a {forum:id=950} forum.
2) This is a very common need. There is no built-in widget in the JDK, and a lot of custom approaches, including in libraries. Google for "Java Swing wizard"
3) If you roll your own, the simplest way, as far as the GUI layer goes, is to stuff your panels in a CardLayout, and have your buttons switch the current "card". Very simple: http://download.oracle.com/javase/tutorial/uiswing/layout/card.html
4) The trick may be in keeping the "business logic" in sync (if for example panel 2 depends on processing info from panel 1). If you're new to java and Swing, make sure you understand objects and references

UILoader and next-button

Hi!
I use UILoader to load pictures from folder. Example 1.jpg, 2.jpg etc. I have just buttons to browse pictures. Button 1 loads picture 1 etc.
Now I need next and back buttons to browse pictures. Is it possible to do? How?
Here is code I use:
var photo:UILoader = new UILoader();
var defaultPIC:URLRequest = new URLRequest("1.jpg");
photo.load(defaultPIC);
picbox.addChild(photo);
photo.scaleContent = false;
photo.maintainAspectRatio = true;
panel_mc.panelInner_mc.btn_01.addEventListener(MouseEvent.MOUSE_UP, pic1);
function pic1(event:MouseEvent):void{
    picbox.removeChild(photo);
    photo.load(new URLRequest("1.jpg"));
    picbox.addChild(photo);
panel_mc.panelInner_mc.btn_02.addEventListener(MouseEvent.MOUSE_UP, pic2);
function pic2(event:MouseEvent):void{
    picbox.removeChild(photo);
    photo.load(new URLRequest("2.jpg"));
    picbox.addChild(photo);

I have my Quiz Manager setup to Allow backward movement and
to Show progress. I have not enabled any other settings on the Quiz
tab. On the Options Tab, I have under the If passing grade, jump to
"go to next slide" and under If failing, I have Allow user 2
attempts and Jump to "go to next slide".
For each slide I have the same setup under the Options tab as
what I have noted on the Quiz Manager.
I have published and tested the movie. I'm still unable to
use the Back and Next buttons.
Any other suggestions?
Thank you,
Joan

Why i am unable to select between 2 anchor points with in a object while dragging with direct select

why i am unable to select between 2 anchor points with in a object while dragging with direct selection tool instead it moves

Another option is to temporarily change your view to outline mode, when your done switch back to preview mode. Ctrl-Y or View>Outline {View>Preview} The menu option will change depending on which mode you are in.
And another option, double click on the object in question to place it in Isolation mode. You can now edit to your hearts content. When done, click on the gray border at top of document.
So as you can see there are multiple ways of accomplishing the same thing.

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Vista Ultimate, Firefox 4.01 just installed. The back and forward buttons do not work with this new installation. Help please.

O?S is Vista Ultimate 32 bit fully updated. I have just installed Firefox 4.01. I have lost use of back and forward buttons - they are greyed out. Is there a solution please?

It is possible to have earlier data in a tab if the latest tab had target="_top" that means the back key will not work, but if your right-click on the back/forward you see a context menu. As far as I know the only difference between 3.6 and 4.0 ws that the drop-down arrow was dropped but like before you can still right-click.
There are some extensions that mess with the Back/Forward buttons.
There is a difference between gray and '''black''' on the buttons, '''black''' means there is history in that direction.
You can make Firefox 4.0.1 and Firefox 5.0 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

Problem activating the back and exit button with the ALV using OO

I have wrote my first alv using Methods.My problem is that i can't activete the BACK and EXIT button in the standart toolbar .
Look my code please .....
Without PF-STATUS can i do it ?
*& Report YDP_DOUBLE_ALV
REPORT YDP_DOUBLE_ALV.
TABLES : YQM_CERT , MARA , YOUTPUT_APPL.
DATA : ALV_GRID TYPE REF TO CL_GUI_ALV_GRID,
       CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       FIELD_CAT TYPE LVC_T_FCAT,
       LAYOUT TYPE LVC_S_LAYO.
DATA : ALV_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
       CUSTOM_CONTAINER2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*       FIELD_CAT TYPE LVC_T_FCAT,
*       LAYOUT TYPE LVC_S_LAYO.
DATA: DYNNR TYPE SY-DYNNR,
      REPID TYPE SY-REPID.
DATA: OK_CODE TYPE SY-UCOMM.
DATA : BEGIN OF ITAB OCCURS 0.
        INCLUDE STRUCTURE YQM_CERT.
DATA   END OF ITAB.
DATA : BEGIN OF ITAB1 OCCURS 0.
        INCLUDE STRUCTURE YOUTPUT_APPL.
DATA   END OF ITAB1.
* MODULE DISPLAY_ALV OUTPUT
MODULE DISPLAY_ALV OUTPUT.
SET PF-STATUS 'ZST9'.
PERFORM DISPLAY_ALV.
ENDMODULE.                    "DISPLAY_ALV OUTPUT
                   "DISPLAY_ALV OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
START-OF-SELECTION.
LAYOUT-ZEBRA = 'X'.
LAYOUT-GRID_TITLE = 'YQM_CERT'.
LAYOUT-CWIDTH_OPT = 'X'.
LAYOUT-SMALLTITLE = 'X'.
SELECT * FROM YQM_CERT INTO ITAB.
    APPEND ITAB.
ENDSELECT.
SELECT * FROM YOUTPUT_APPL INTO ITAB1.
    APPEND ITAB1.
ENDSELECT.
CALL SCREEN 100.
END-OF-SELECTION.
*&      Form DISPLAY_ALV
*       text
FORM DISPLAY_ALV.
IF ALV_GRID IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER
      EXPORTING
*      PARENT                      =
        CONTAINER_NAME              = 'CC_ALV'
*       style                        =
*      LIFETIME                    = lifetime_default
      REPID                       = REPID
      DYNNR                       = DYNNR
*      NO_AUTODEF_PROGID_DYNNR     =
*    EXCEPTIONS
*      CNTL_ERROR                  = 1
*      CNTL_SYSTEM_ERROR           = 2
*      CREATE_ERROR                = 3
*      LIFETIME_ERROR              = 4
*      LIFETIME_DYNPRO_DYNPRO_LINK = 5
*      others                      = 6
    IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT ALV_GRID
      EXPORTING
*    I_SHELLSTYLE      = 0
*    I_LIFETIME        =
        I_PARENT          = CUSTOM_CONTAINER
*    I_APPL_EVENTS     = space
*    I_PARENTDBG       =
*    I_APPLOGPARENT    =
*    I_GRAPHICSPARENT =
*    I_NAME            =
*    I_FCAT_COMPLETE   = SPACE
* EXCEPTIONS
*    ERROR_CNTL_CREATE = 1
*    ERROR_CNTL_INIT   = 2
*    ERROR_CNTL_LINK   = 3
*    ERROR_DP_CREATE   = 4
*    others            = 5
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
*      I_BUFFER_ACTIVE               =
*      I_BYPASSING_BUFFER            =
*      I_CONSISTENCY_CHECK           =
         I_STRUCTURE_NAME              = 'YQM_CERT'
*      IS_VARIANT                    =
*      I_SAVE                        =
*      I_DEFAULT                     = 'X'
       IS_LAYOUT                     = LAYOUT
*      IS_PRINT                      =
*      IT_SPECIAL_GROUPS             =
*      IT_TOOLBAR_EXCLUDING          =
*      IT_HYPERLINK                  =
*      IT_ALV_GRAPHICS               =
*      IT_EXCEPT_QINFO               =
*      IR_SALV_ADAPTER               =
      CHANGING
        IT_OUTTAB                     = ITAB[]
*      IT_FIELDCATALOG               =
*      IT_SORT                       =
*      IT_FILTER                     =
*    EXCEPTIONS
*      INVALID_PARAMETER_COMBINATION = 1
*      PROGRAM_ERROR                 = 2
*      TOO_MANY_LINES                = 3
*      others                        = 4
    IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
    CALL METHOD ALV_GRID->REFRESH_TABLE_DISPLAY
*       EXPORTING
*         IS_STABLE      =
*         I_SOFT_REFRESH =
*       EXCEPTIONS
*         FINISHED       = 1
*         others         = 2
    IF SY-SUBRC <> 0.
*      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDFORM.                    "DISPLAY_ALV

Hi
U need to active them in your status ZST9.
Max

HT2470 The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything!

The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything! Help!

Select a Finder window, Finder->View->Customize Toolbar…, and add it back.

History , Back and forward button to be disabled for some pages

Hi ,
There are buttons ( history, back and forward) just below the top level navigation in portal.
Is there a way that some pages can be restricted in History , Back and Forward operations so that some pages cannot be captured with history , back or forward actions in portal.
Best Regards
Sid

Hi Siddharth,
If we open our framework page there is something called Page title bar. This contains History, Back and Forward button. If we make it disable it'll not be visible in our portal.
So according to your requirement you can create a new framework page and can make changes in that framework page. Assign this framework page to a portal desktop and use it where you want.
Please reward the points if it is useful.
thanks,
pankaj

My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

*Still* unable to reposition back and forwad buttons

I posted about this when the problem began with version 29, and have have posted since then, but the problem has not been corrected.
Starting with version 29, I cannot put the back and forward buttons where I want. They are stuck to the left edge of the address field. I do not want them there. I want them on the far left as the first buttons with other buttons between them and the address field.
I can put the buttons wherever I want in every other browser. I am so damn annoyed and frustrated with Mozilla because of this. They have reduced options. They have reduced they ability to customize controls. They should not have done this and they should have corrected it by now. I will have to use Safari, or Chrome, or *anything* but Firefox because it is the only browser with this limitation.
Why the hell aren't they listening? Why are they reducing choice? Why don't they care? Damn it!

You can look at the Classic Theme Restorer extension to customize the appearance in Firefox 29 and later and make it look like older Firefox versions.
*Classic Theme Restorer: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
*You can check out the settings of the CTR extension via its Options/Preferences button on the "Firefox/Tools > Add-ons > Extensions" page.
*You can find extra toolbar buttons and more toolbar settings in Customize (3-bar Firefox menu button > Customize)

Navigation back and forth between anchor points with "prev" and "next" buttons?

Similar Messages

Maybe you are looking for