Navigation back to UWL after completing the task.

Hi All,
I am new to the portal, I would like to know is there any way to navigate back to UWL after completing a task in UWL instead of seeing the action is completed screen?
Thank you in advance.
Regards,
Ravi

Hello Ravi,
Open the UWL iView, there will be a parameter named 'Path to the UWL iViews' which needs to be set to 'portal_content/every_user/general/uwl'
Please check and confirm.
Regards,
Ritu

Similar Messages

HT201250 Anyone have time machine "lock up" while backing up and not completing the task?

I have the drive connected for over 24 hrs and time machine will only back up 25% of the 75Gb it claims to need to back up.
I have re tried and get the same result, and T.M. will show "backing up" even after 24 hrs.
I know it is not the drive being too full or being defective, since a partition set up for a pc works just fine.

Hi, many people have, but I think you need to Repair the TM Partion, & maybe your Boot drive, maybe more.
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine something not being covered there.

URGENT!!! Diff SessionId when request come back after completing one task

Hello,
I have a web application that uploads collages done from our site1 to some other site2. To upload to site2 one has authenicate youself....in this process of authenication , sometimes !!!!when the request comes back to site1 after authentication the sessionid is differemt....although this does not happen all the time...it happens for some users and for some it deosnt.....
how do i get my prevoius session id incase its different from the orginal one....
Is there a way to get arround this problem....
Urgent...its production issue....i need help
-Praveena

1. Dont mark your posts 'urgent' - it would more likely put off people.
2. If you get a new session, it means the original session has been discarded and there's no way you can retrieve it.
3. What do you mean when you say a web application that uploads from one site to another site? How does it work? Is your jsp page (from which you upload part of web application in site1 or site2)
ram.

Setup the UWL to open the tasks in the right application defined in SWFVISU

Hello!
I'm trying to set up the UWL to open the tasks defined in transaction SWFVISO, and I'm kind of stuck, so I hope you can help me.
When I open an item, I get the the following error:
Business Server Page (BSP) Error
What happened?
Call of BSP page terminated due to error.
Note
Following error text processed in system:
BSP exception: Access to URL /scripts/wgate/webgui/! is forbidden.
Error Type:
Your SAP Business Server Pages Team
Whats really bothering me, is that the application I want to execute the Work Item at, is Web Dynpro for Java?
When the UWL connector is defined, you define ITS and/or WAS to launch back-end task handlers. The decision of which is selected, is defined in SWFVISU, where you select Web Dynpro JAVA - in my case. (please do correct me if i'm wrong)
Then I dont understand why it tries to use ITS?
Regards
Lasse

Part of the issue was that the XML was not generated automatically - the solution for this was due to a change in SP18.
See this post for the solution: SWFVISU task not appearing in any of the UWL Config files
Edited by: Lasse Finderup on Oct 20, 2009 2:09 PM

After completing the OS X Mavericks everything runs slow

After completing the OS X Mavericks everything runs slow. Programs, menus and files. When I click on them it is like they hesitate to open. Programs are slow at opening and working with them.

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to execute closing cockpit after completed the configuration?

Hi Expert,
Please help, how to execute closing cockpit after completed the configuration? or if who have a document it will be helpful.
Best regards,

components of closing cockpit
Organizational Hierarchies (Company Codes, Controlling Area, Operating Concern, etc)
Task List template (Preconfigured templates available)
Task Lists: Derived from template and extremely crucial for successful definition of the month-end close.
Dependencies between the tasks
Monitor
Detailed information
5 steps for setting-up Closing Cockpit
Conduct Planning and Research
Create the basic template data
Build the closing template hierarchy structure
Configure individual tasks
Change the template to an executable task list
For delivering the Closing Cockpit successfully, you need to have a clear understanding of the current closing routines, the required tasks, who is responsible for each task, which tasks when executed should affect which level of the organization, and finally a clear process for review and documentation.

Cancelling WIP Job after completing the job

Hello Everybody,
There is an issue as to 'Cancelling WIP Job after completing the job'
Please let me know how to resolve this or the workarounds.
Provide me the navigation please.
Thanks

Hi abdul;
Please check this and also Note:WIP Purge FAQ [ID 605621.1]
Hope it helps
Regard
Helios

To Complete the task without taking complete action in BPM worklist.

In my project ,there is one requirement that to complete the task without taking complete action in BPM worklist.
So I am trying to acheive this using JAva API of BPM worklist.
For that I have followed the approach given in below link
http://technology.amis.nl/2007/02/invoking-bpel-worklist-api-from-remote-server-with-java/
Created java application and imported all the required libraries and jars.
while running this application it is giving following error
NoClassDefFoundError: oracle/j2ee/ws/common/jaxws/ServiceDelegateImpl
This is due to absence of 'ServiceDelegateImpl.class' which should be present in webclient.jar ,
I have also added the same jar from jdeveloper\webservices\lib folder.
but the thing is ServiceDelegateImpl class is missing in webclient.jar.
I have downloaded the same jar from internet and tried various versions also.
still the problem persists.
Which jar should I add ? or any other configutation is required ?
Am I following correct approach?
Any suggestions on other approach would be appreciated.
Thanks in advance.

Hi Marc,
You can set the task Process Owner (i.e. TaskProcessOwner) to the group which Bowman and
Laura belong to from SharePoint Designer, then they should be able to complete the re-assigned task.
http://www.fourbuckeyes.com/2013/06/07/task-delegation-in-sharepoint-2010-approval-workflows/
http://community.rightpoint.com/blogs/viewpoint/archive/2012/04/17/sharepoint-designer-2010-workflow-advanced-properties.aspx
Thanks
Daniel Yang
TechNet Community Support

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

How can I wipe a drive on an old iMac that won't stay on long enough to complete the task?

How can I wipe a drive on an old iMac that won't stay on long enough to complete the task?

Do you have access to another Mac? If so contact the two via a Firewire cable, boot your problem Mac into Target Disk Mode, Transferring files between two computers using FireWire,, and try to use Disk Utiltiy from the second Mac to reformat and erase your hard drive.

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

I'm wondering if there is a way to make the Reminders Notification "Complete" the task.

As it is, I can snooze the task or I can close the task, but I cannot complete the task. Is there an option to have this popup on my screen? Or am I stuck with the two default answers?

I think all you can do is to click on the notification so that the reminder gets displayed and then you can complete it from there.
Otherwise: Apple - Mac OS X - Feedback

My Mac laptop IPhoto is "stuck" on a screen that says, "Please wait for import to complete." I can't get it to complete the task.

My Mac laptop IPhoto is "stuck" on a screen that says, "Please wait for import to complete." I can't get it to complete the task. What do I do next?

Force Quit the app. It's under the File menu.

Navigation back to UWL after completing the task.

Similar Messages

Maybe you are looking for