Navigation bar not rendering correctly in Windows IE

Hi everyone,
This is my first project using iWeb, and I've had some Win users email me a screenshot of the site's navigation bar rendering incorrectly. As the site is loaded, the bars appear blue in background, and according to them, sometimes it turns black, sometimes not. Please check it out and let me know if you have a solution?
www.downriveractorsguild.org
Thanks,
Dave
PS - it seems to be rendering fine in safari and firefox (mac). Also, I did search the forums and didn't find a similar issue in several pages of results.
iMac G5 20'
iMac G5 20

The navigation menu is completely composed of PNG graphics... therefore, sometimes IE has difficulty rendering these properly. Most of the time, the problem is self-limited...iWeb's .js file goes over after everything has loaded and re-renders the PNGs to make them viewable specifically in IE. But sometimes the problem is persistent...and you might see grey boxes behind the menu items probably as your viewers are describing.
I have seen both behaviors with my site.

Similar Messages

Navigation bar not displaying correctly in IE6

Hello,
I'm having trouble getting my navigation bar to display correctly in IE6!!! I've tried using the zoom: 1 IECC for #header, #header li a etc but can't seem to get it to display in the correct place. I'm fairly new to CSS (that's probably obvious!) and have been working through a tutorial to get this far but unfortunately the design you want never quite matches the tutorial!
http://www.lewistest.webatu.com/
Any help or any other comments about my coding or design would be greatly appreciated!
Thanks,
Tracie

Oops sorry, I've used them before and forgot they did that soon after a site was set-up! My other site is hosted by them with no problem.
If you are able to see the site now the link is still http://www.lewistest.webatu.com/ ... failing that I will post source code etc tomorrow

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98972)

[SOLVED] KDE4.3 is not rendering correctly the images in the desktop

I've posted a bug in KDE because the KDE images are not rendered correctly:
https://bugs.kde.org/show_bug.cgi?id=202829
You can see an image of my desktop at:
https://bugs.kde.org/attachment.cgi?id=35921
As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
http://wiki.archlinux.org/index.php/ATI
I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
Someone with an ATI card has the same problem? Which driver would you suggest to me?
Thank you
Last edited by jjjaime (2009-08-06 19:04:12)

Thank flamelab for your help.
The xf86-video-ati-git:
http://aur.archlinux.org/packages.php?ID=15374
fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
Best regards,
Jaime

PDF not rendering correctly

Hi
Can anyone help? I am using an iMac and have had a pdf emailed to me. When I login on to the site and select the PDF to view, it is not rendering correctly.
I am not a technical person but to me it appears to open as a series of code, letters, numbers and symbols.
Any ideas how to rectify this?
Is it Adobe related or can I update the settings for the browser? I am using Safari.
Thanks

what OS & Safari version ?
Often, removing any 'pdf' plugins in
/Library/Internet Plug-Ins/
and
~/Library/Internet Plug-Ins/
then restarting the browser will solve pdf display issues, although in this case, it sounds as if the site is telling Safari that these are text type files & it's attempting to display them accordingly.
Disabling plug-ins via Safari - Preferences - Security should also eliminate pdf plug-ins as a cause.

Basic Layout not rendering correctly.

''locking as a duplicate of https://support.mozilla.org/en-US/questions/1035123''
Hello,
I've been trying to debug a problem I was noticing on my production websites, so I dumbed it down to a quick codepen to show off the issue. http://codepen.io/anon/pen/GgoBNJ
Basically, standard fonts (helvetica, arial, etc.) are not rendering correctly within a div. For some reason the text is pushing itself up ~2 pixels. Not to mention, fonts are looking very jagged within the browser for no apparent reason.
I am setting up a basic div with hardly any styles and yet this produces two different renderings within FF and Chrome
.box{
font-family: Helvetica, Arial, Sans-serif;
font-size: 14px;
border: 2px solid #FF5500;
display: inline-block;
width: 100px;
This is causing me all sorts of headaches with designers who are trying to make layouts pixel perfect as I have zero control over something like this. Any help would be greatly appreciated!
Thanks in advance.

You may have zoomed the page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can right-click on a web page and select "Inspect Element" to open the Inspector (Firefox/Tools > Web Developer).
You can check the font used for selected text in the Font tab in the right pane of the Inspector.
*https://developer.mozilla.org/Tools/Page_Inspector
You can do a font test to see if you can identify corrupted font(s).
*http://browserspy.dk/fonts-flash.php?detail=1
You can try different default fonts and temporarily disable website fonts to test the selected default font.
*Tools > Options > Content : Fonts & Colors > Advanced
*[ ] "Allow pages to choose their own fonts, instead of my selections above"

Rollover text not rendering correctly in Safari 7.x

Safari 7.x and my blog (NotNecessarilyPretty.com) are not getting along.
Specifically, the rollover text in the post titles (see attached or visit site) is not rendering correctly. The right edge of the text does not change to the correct color. Have been in contact with Apple as well as the theme's developer, but have yet to be offered of a fix.
This blog displays correctly when accessed via Chrome or Firefox, and prior to Mavericks, Safari evidenced no problem.
Thoughts on how to correct this?
Thanks!

The original screenshot didn't show here, so for anyone else reading, who may well know much more about CSS & Safari than I :
changes to this - note the right edge
But with word-spacing un-checked in Inspector...

RequestCenter emails not rendering correctly in Outlook 2007

RequestCenter emails not rendering correctly in Outlook 2007
I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007. When I look at the same email in Outlook 2003, the HTML formatting is fine. Here's a picture of the same email displayed in Outlook 2003 and 2007:
When I view the source HTML of the email, I noticed that there are duplicate HTML, HEAD, and BODY tags that have been automatically added by RequestCenter. Apparently these extra tags are ignored by Outlook 2003, but cause problems with Outlook 2007.
This picture shows the HTML source in RequestCenter's HTML editor compared to the HTML source from within Outlook with the extra tags.
I tried removing the HTML, HEAD, and BODY tags in the HTML editor, but the editor puts the tags back in when you save it.
Does anyone know how to fix this?
Thanks,
Scott

We've actually had the same problem and had opened a ticket with customer care - it's the editor that's in the version we have (or had, since we are going through the upgrade). What we've had to do is embed xml tags in the body of the email too, and then the team that processes the email has a little application that will process the data in the tags and strip the HTML that the editor applies. Not much help, I know.
I've heard a rumor that the issue is fixed in 2007 with the new text editor - I'

Adf application not rendered correctly with url ip and url localhost.

Hi all.
I have a strange problem. When I enter to my adf application deployed in a local stand alone weblogic server with the ip:
http://localhost:7001/Application/faces/index
it renders fine. But when I load it with the url:
http://10.5.14.15:7001/Application/faces/index (private ip), it doesn´t render fine. Tables haven´t the same style, and some elements appear selected like if I have selected them with the mouse.
This problem only happens with internet explorer, not with Chrome.
Also when I see a table inside a region in a jspx, the with of the header of the columns is not rendered correctly, causing the width of the header row not be the same than the other rows.
This problem also happens only with internet explorer.
Any help please?
Internet Explorer 8. JDeveloper 11g.2. Weblogic 10.3.5.0
Also happens with Internet Explorer.
Maybe encoding? doctype?
Thanks

What would the DOCTYPE have to do with the IP address?
Have you looked at the HTML source in the different browsers and tried to debug what's wrong? Sounds like there may be some images/css files that aren't being downloaded in IE when you use that IP address. Are you sure IE isn't configured with a proxy?
John

Device detected driver not loading correctly per windows

Device detected but driver not loading correctly. Windows says to reload driver. I have reloaded driver and the Nidaq software package (ver 6.9.3) repeatedly to no avail.
Upgrading from old machine that had a 1997 version of driver that work fine under this OS (win98SE).
What could be the problem?

It's possible the copy of the NI-DAQ driver you have is corrupt, you may want to download it again. It's available from the Drivers and Updates page. Also, if you did not already do so, remove the DAQ card before uninstalling the driver and then reinstall it before reinserting the DAQ device.
What DAQ device are you using? Depending on what DAQ device you have, you may want to upgrade the driver, the most recent version of the NI-DAQ driver for Windows 98 is 7.1. You can see what driver is best for your device from the DAQ Acquisition Installer/Configuration Troubleshooter and then download the driver from the Drivers and Updates page.
Let me know if this doesn't solve your problem!
Micaela
Micaela N
National Instruments

'Sorry, Too Many Cards' message NOT rendering correctly

I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
Thanks,
Post relates to: Pre p100eww (Sprint)

lblumen wrote:
Am getting same message. Since new update was downloaded. Also, I am getting the too many cards open message daily, even when no other cards are open
I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

Panel Page in ADF Faces using Facelets not rendering correctly

Hi, I am attempting to integrate facelets into a web app built using adf faces and am running into a problem with the panel page component. I have integrated facelets and adf faces without any problems by adding relevant jars (jsf-facelets and adf-facelets) to the project and specifying alternate facelets view handler in web.xml.
However, when I try to render any component inside <af:document> or <af:html> tags, all the font style in components seems to be lost ( all the text and input fields turn large and ugly!).
I tried to leave out the <af:document> tag and put the <f:view> inside some vanilla html instead, but then panelPage component dosen't render properly and I get following message on top of page :
"Skip navigation elements to page contents"
So seem to be in a bit of a catch 22. By the way, this all works fine if I don't use facelets (remove the facelets view handler from web.xml and page renders correctly).
Does anyone have any ideas or examples of panelPage rendering correctly with facelets or an alternative to using adf faces html tags that will allow panelpage to be displayed?
The following is the code from a simple test jspx page :
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:c="http://java.sun.com/jsp/jstl/core"
xmlns:ui="http://java.sun.com/jsf/facelets">
<f:view>
<af:document>
<af:form>
<af:panelPage title="Title 1">
<af:panelHorizontal>
<af:panelGroup layout="vertical">
<af:outputLabel value="Username"/>
<af:inputText id="lo_username" value="" columns="20"/>
<af:objectSpacer width="1" height="10"/>
<af:outputLabel value="Password"/>
<af:inputText id="lo_password" secret="true" value="" columns="20"/>
<af:objectSpacer width="1" height="15" />
<af:panelHorizontal>
<af:objectSpacer width="50" height="1"/>
<af:commandButton id="lo_loginButton" text="Login"/>
</af:panelHorizontal>
</af:panelGroup>
<af:objectSpacer width="50" height="1"/>
<af:panelGroup layout="vertical">
<af:outputLabel value="Please use your windows account username"/>
<af:outputLabel value="and password to logon to the system"/>
<af:objectSpacer width="1" height="50"/>
</af:panelGroup>
</af:panelHorizontal>
</af:panelPage>
</af:form>
</af:document>
</f:view>
</jsp:root>

The problem was the <jsp:root> tag. Removed this tag and modified <af:document> to the following so that namespaces are declared :
<af:document xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:ui="http://java.sun.com/jsf/facelets">
Page now renders properly using facelets.
Message was edited by:
mjc

Tableview not rendering correctly

Hello,
I am running into some problems witth my tableview rendering correctly and I think it is related to a SP but I can't find the issue to fix. My tableview is rendering extremely slowly and not correctly at all. Inputable fields are not open for input (even though I opened them up in my iterator) etc... I have searchedthru SDN and OSS and still I can't find an answer to my issue. I put a break point in my start page and started debugging runtime->session_manager->header_script( ). This is the very first thing to execute in my BSP. Even before my window.open('main.do' etc... executes. While I was debugging I started looking at the variables. and I noticed that they are looking funny. For example I displayed MPAGE_CONTEXT->M_OUT and the contents look like this
Strange huh? This BSP is working in our QA environment and the MPAGE_CONTEXT->M_OUT contents are displayed as 15<\CLASS=CL_BSP_WRITER_HTTP>. Has anyone seen anything like this before? I am really pulling my hair out of my head. Did I mention that I have been doing code compares between the 2 environments on everything and I don't see any differences? I have been doing compares on my BSP as well as CL_HTMLB_TABLEVEIW, SAPMHTTP etc.... The only difference is between the 2 systems is QA is on SP47 and DEV (the broken one) is on SP51.
I am getting alot of **illegal reference** in the contents of alot of my variables as well.
I did post a similar question to this one before and I did get some helpful hints that I did try but its still not working. I am hopeing that by adding more description it will jog someones memory.
Cheers,
Rich
P.S. This dang issue is very depressing

Hello Thomas,
Well isn't this an interesting little transaction. After the basis team left I ran it for BSP applications only. What they don't know won't hurt them(hehe). Any way it hasn't resvolved my issue. I re-ran ITMVC2 and when I display variable main_view in do_request of CL_BSP_ITMVC2_MAIN I still get a **illegal reference** in the contents of that field until the create_view method is executed. Then it is displayed as .
Now in the system that works the contents of main_view in do_request are displayed as <>0 and after the create_view method executes then the contents of main_view are displayed as 20<\CLASS=CL_O2DSWT0NXG3ZWICN0VQJDBF4SNB>. No squiggly lines, no colons and no **illegal reference**. The are not alot of differences but enough to give me serious grief.
I have opened a message with SAP and hope to hear from them ASAP. Additionaly I will add what I just did (meaning running a small SGEN) to the message to aid in their debugging.
Thanks alot for your input and if you think of anything else I would be eternally grateful
Cheers,
Rich

Colors not rendered correctly in Photos

The Photos app is not rendering colors correctly. I just downloaded the Loom photo organizer app, which accesses photos from my iPhone Camera Roll. As I was using Loom to scroll through photos on my iPhone Camera Roll I noticed that one particular nature photo displayed vividly, the way I remembered it when the photo was taken a few days ago. The image was of a large grove of golden aspen on a mountainside in Wyoming. I had viewed the same photo using the Photos app and thought the yellows looked muted but assumed that the colors had been affected by the glass car window, through which the original image was taken. Curious, I compared architectural photos I took in Denver earlier today and noticed the same thing. Colors were presented correctly by Loom, but yellows were not expressed correctly in the Photos app. Neither of these photos had been edited in any way and both were taken in natural light. The architectural shot was not taken through glass.
I looked for a color correction or color balance setting on the iPhone, but did not find one. My iPhone dsplay hardware seems fine, again, becuase Loom presented the colors correctly.
I am curious if anybody else has noticed this and also wonder how I might notify Apple.

Now I understand the problem described in my post, above. I don't know how it happened, but a "Fade" filter was being applied to all of my recent photos in the Photos app. When I selected "None" in the filter menu, the yellows were expressed properly. Again, I don't know how this happened. Older photos did not have the Fade filter applied. I'll have to pay attention to this in the future.
But, if you want to reduce the yellow in your outdoor photos, the Fade filter works well.

Navigation bar not rendering correctly in Windows IE

Similar Messages

Maybe you are looking for