Navigation Bar Profile - Copying business role SalesPro

Dear all,
i am on CRM 7.0 and i have to create a business role copying the standard one SalesPro. Easy.
Therefore, i want to create a navigation bar profile ZSales pro copying the one already used SLS-PRO for the standard one. But when i make the copy, the system requires an entry in the field Action Object for the entry Object Type: BP_ACCOUNT_CHM, Object Action: "empty in standard", target id: MD_BP_OV and highligth: MD_BP_SR where it is blank in standard !!!
The copy then is not fully done and i cannot create an entry with empty field, how can i manage this, please ?
Thanks for your help,
Jay

Hi,
Refer to this thread Error inNavigation bar creation.
Similarly you can skip those entries for the time being and later maintain it again if needed for dynamic navigation.
Hope this helps.
Cheers,
Sumit Mitta

Similar Messages

Copied Business Role in Solution Manager ITSM

Hi All
This is eunhwa.
I have a question regarindg copied business role in Solution Manager ITSM.
To copy business role, I copied technical roles Navigation profile, configuration key and PFCT Role ID. And then I copied
a business Role. And assign copied technical roles to copied business role.
And I changed Direct link group UI. For example, in copied business role ZSOLMANPRO, There were many
direct links, I only left ‘incident’ and ‘problem.
However when I selected incident’ in direct link, there was no transaction ‘zmin’ assign. I couldn’t create a incident.
Why this error happened? Is there anything which I miss?
Thanks.
Best Regards,
Eunhwa Park

Hi,
Well, there are multiple things you can check.
1. If you are using IE
You have to add the page/pop-up to the compatibility mode of your Browser.
IE -> EXTRAS -> Settings for Compatibility Mode -> Add -> Refresh the CRM WEB UI
2. Check if you had assign SM-CREATE in the ZSOLMANPRO Navigation profile. (In Assigning the direct link groups to Nav. Bar profile.
3. Check whether you had authorizations for ZMIN in PFCG profile.
4. Additionally check
1905448 - How to restrict the suggested transaction codes when creating an ITSM
Incident using CRM Web UI - Solution Manager
5. In define transaction types corresponding transaction types are active. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
6. Check the copy control whether they are fine. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
7. Ensure that the transaction type's channel definition in customizing is set to 'CRM Web-Client UI'
If your issue is still not resolved yet, please paste the error/screen you are getting.
Regards
Rishav

Copy Business Role

Hello ,
Is there some way to copy Business Role including all views?
Or I just need to copy every view separetly?
Thank you
Rika

Hi Rika
I doubt it, I'm not sure why you would want to copy a bulk selection of views in any case.
Views should only be modified on an adhoc basis.
Regards
Arden

Delete button tool bar level in business role( sales roles)

Hi,
I have 10 business roles is there sales related
for eg :business role : 1) Salespro
                                   2)z1Salespro
                                    3)z2Salespro
                                   4)z3salespro
                                   5)z4Salespro
                                   6)z5Salespro
                                   7)z6Salespro
                                   8)z7Salespro
in tool bar level Diagnosis button is there
i want delete that button (Diagnosis) in particulare bussiness roles in toolbar level.
      1) z1Salespro
      3)z3salespro
      7)z6Salespro
      8)z7Salespro
Remaining business roles i want able that button(Diagnosis) in toolbar level.
                                   4)z3salespro
                                   5)z4Salespro
                                   6)z5Salespro
Can you please suggest how can i proceed further
where i write the logic.Please share your ideas and logic.
Regards,
Sai

Hi Sai,
Better option is , Disabling the "Diagnosis" buton for few users rather deleting button.
You can use user role as parameter and at button (Diagnosis) level write logic.
Thanks & Regards
Ravi

Assigning business transaction profile to business role

Hi all,
I can't find any transaction where I can assign the business transaction profile to the business role itself. Basically I have created a business transaction profile (with many dependent transactions) and I want to assign this to my Zbusiness role, but I dont know where this can be done.
Can anyone of you please help me with this.
Thanks,
Prakruthi.

Hi Arden,
Thank you for your reply. My scenario is that i have 5 different types of service orders SO1,SO2, SO3,SO4,SO5.All of these have to be created from a service contract (there is an enhancement in place for copy control from service contract to service order). But if I want all these service orders to be seen on the IC webclient screen with their relevant status,date profile and partner determination procedure then do I need to assign these service orders as dependent transactions on the business transaction profile?
I understand that for one business transaction profile only one dependent transaction can be set as 'service relevant' (radio button).
Kindly reply as I am completely new to the IC world.
Thanks,
Prakruthi.

Telephony integration (CAD function profile for business role)

Hi,
1. What's the purpose of defining Contact Attached Data (CAD) profile, then assigning it to the business role?
2. Have you got the step-by-step guidance in configuring that?
Thank you.

Lots of stuff posted in this forum over the last year you should be able to find to answer your question.
What is Computer Telephony Integration (and Why Do I Need It?)
IMG
1. SM59 setup pointing to the vendor ICI product
2. IMG Path: u2192 Customer Relationship Management > IC Web Client> Basic Functions > Communication Channels > Define Communication Management Software Profiles
3. Assign to IC web profile as Contact Center (item created in 2nd step)
non IMG (done manually in each client, dev, test, prd)
4. CRMM_BCB_ADM, define name and point to step 1.
5. CRMM_IC_MCM_CCADM add item from step 4, choose channles phones, and ques are phone 3. Set CAD handling to 4 (leave blank for SAP CCS).
6. CRMM_IC_MCM_CCLNK step 2 to step 4.

Email profile in business role

Hi experts,
How can I find out if there is any email profile existing in the business role of the user?
Is there any FM for this?
Thanks,
Mohit.

Hi Mohit,
You can always query table CRMC_UI_PROF_A for that.
Kind regards,
Garcia

Issue regarding Business Role assignment

Hi All,
1.
I have a user Agent1 which is assigned to position POS_IC_AGENT in my org structure.
In the infotype Business Role I have assigned IC_AGENT (standard) business role.
IC_AGENT has PFCG role SAP_CRM_UIU_IC_AGENT assigned to it.
But, when I run the application (for my user Agent1), only telephony buttons are visible on top, navigation bar and work area is empty (nothing is visible there)
2.
Now, when I open my user Agent1 in SU01 and assign PFCG role SAP_CRM_UIU_IC_AGENT.
Now when I run the application everything is visible (telephony, navigation bar and workarea).
Why is it not visible in first case?
I think it should work without assigning Role in SU01.. I mean it should have taken settings from Org. structure
Regards,
Ashish

Hi Ashish,
As far as work center page context is concerned , its decided by the navigation bar profile and business role customizations ( we add work center home and several related stuff etc in navigation bar profile and make them activate/deactivate, visible/invisible through business role customizing ) .
PFCG role has nothing to do with what you see on the Work Center...it decides whether you can see or not..meaning whether you have authorization for disply of a business object and its related subobjects.
PFCG role basically determines the authorization objects that will be grated to the particular business role ( to which this PFCG role is linked ) PFCG is about CREATE/CHANGE/DELETE authorizations.
In first case, its business role linked authorizations. You dont see the work centers may be because USER has not granted the DISPLAY authorization for the business Object related to BP( i.e Account ) , or BO related to account search (BUPASEARCH ) as the IC agent home basically has Account identification home , or account search home...which overrides the PFCG authorizations attached to the business role.
Remember, individual object authorizations set for a user using transaction PFCG will have more priority over the Business role linked authorizations as 1 business role can be assigned to many users however if one user is not grated to see BP related data, this will still remain enforced even though the business Role PFCG is granting him to see...There is a difference between user specific authorizations and Business Role specific authorization...
In second case,its user linked Authorizations. When you add the PFCG role in SU01, this is being the User Specific Authorizations which will always have the priority and thus granting the display.
This is my basic understanding. I am 100% sure that PFCG role only controls the DISPLAY/CREATE/CHANGE related authorizations and lots more in context of authorizations. However what to include & show is decided by Navigation Profile and Business Role customizations.
If everything is intact in navigation bar profile and business role customizations, and still you dont see anything on the work center, then i am 100% sure that its related to User Authorizations
Refer pg 56 in CR580, it will clear your doubt.
Thanks & regards,
Suchita

Multiple Transaction Type Specifications in Navigation Bar of IC web client

Hi Experts,
We created three transaction ZCBC-Customer Billing Complaints,
ZCRR-Customer Refund Request and Z_SC-Service Ticket which are the
copy of CRMC-Service Complaints with Transaction Category
'BUS2000120 Complaint'.
The IC Web Profile we created ZAGENT0001, Runtime profile:ZAGENT0001
and Navigation Bar Profile:ZAGENT0001, Business TransactionProfile:
ZBTP0001.
The Navigation entries are ZCUSTOMER_REFUND_REQUEST-Cust. Refund,
SERVICE_COMPLAINTS-Service Ticket, ZCBC0001-Cust. Bill. Complaint.
Problem: In the Business Transaction Profile only one default
transaction type (Complaint (BUS2000120)is allowed. But our
Business Process demands to choose 3 transactions for the same
Transaction Category where it is not supported by the Standard
functionality.
Advice us the possibility of choosing the 3 transactions
where the Agent is allowed to access all the three in the
IC Web through the navigation bar.
Please send me a solution for that as it is very urgent.
Thanks in advance
Koustav

Hi thirumala:
Could you send me the ic web client cook book, or do you have any guide on how to configure transaction launcher, in crm 5.0, i know it is a standar funciontality, but i have the following problem, i need to show some transactions like BP, in icwc, and then pass the transaction the confirmed bp number, i've already configured ITS, but i don't know wich are the following steps to do what i want, so could you give some guideance.
Thanks & Regards

Portal & business Role updation

Hi Gurus,
here i have created and assigned transaction launcher and logical links under navigation bar profile for "Zsalespro" role and it is working fine in webui. but myclient is using portal.
so question is "do i need to do any additional setting to let this appear in portal for this role ?if yes, then how..?
or
it will appear automatically once you assign and activate it in business role, if no additional setting is required for portal ?
please help me with this.
Thanks for your support.
Regards,
G

Thanks for the replies
i) I have already linked my user to an employee record and added it to the org model.
ii) Also I have my own backend role linked a portal role and performed the config in PCUI (Navigation (URL Generation)). The BW iViews work fine and the CRM iView Marketing Attributes works fine - it's the other iviews
I have switched in iView debugging and this is the error
Parameters to send to backend:
Test mode information (displayed if X_TestMode property is YES)
Parameters to send to backend:
{IO=DfIyqWPAva{DVuYkFF784W, X_TESTMODE=X, PROCESSOR=PDV, VKORG=O 50000005, EP_BASE_URL=http://hspd35.supplier.ukho.gov.uk:50000/irj/portal, BP=0700000107}
XML received from backend:
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: No active nametab exists for XSTRING Parameters passed to backend: {IO=DfIyqWPAva{DVuYkFF784W, X_TESTMODE=X, PROCESSOR=PDV, VKORG=O 50000005, EP_BASE_URL=http://hspd35.supplier.ukho.gov.uk:50000/irj/portal, BP=0700000107} XML received from backend: null

2 Business Roles - Navigate from One to Another

Hello
My Key user is assigned a regular Web UI Business Role(CASEWORKER) and it is used for daily work.
However he needs to access standard FCC_AGENT IC specific role in order to process the Collection Work Items occasionally.
Solution which I am thinking was to assign both the Business Roles to User.
However the disadvantage is: User have to switch back to Other Role in order to perform the Operation. Moreover the User is not really happy with this approach.
Is there any other option available ?
Is that possible to Open a new Session (for Secondary Role) from Navigation Bar of first Business Role ?
Please advise.
Cheers

Hi Remo,
Maybe you can consider configuring a new business role for your key-user, where you can put all workcenter that he needs (from both business roles that you indicated).
What do you think?
Kind regards,
Garcia

Using fact sheet 'BP_ACCOUNT_FS' in IC business roles

Hi experts!
I have a requirement to customize the fact sheet in IC business role, where the 'ICCMP_AFS' fact sheet always opens. But I need all the assignment blocks and information that is in 'BP_ACCOUNT_FS' fact sheet.
So, is there any way to make that in IC Business Roles there was fact sheet 'BP_ACCOUNT_FS' but not 'ICCMP_AFS'?
This question is extremely important for me.
Thanks in advance,
Andrew.

Hi, Chimalwar!
What I've done:
1. Defined logical link 'ZIC_AFS' in transaction CRMC_UI_NBLINKS, by copiyng it from standard 'IC_AFS'. I only changed the parameter and put it 'BP_ACCOUNT_FS'.
2. Define Profile (choosed the profile I need) -> Define Generic OP Mapping
Choosed my navigation bar profile and made the following customizing:
Object type: FACTSHEET
Obj.Action: B Display
Use target: nothing checked
Target Id: nothing selected
Use Link: checked
LogLink ID: ZIC_AFS
3. Transaction 'BSP_WD_CMPWB', Component: BSP_DLC_FS -> Component structure browser -> Views -> BSP_DLC_FS/factsheet. I've created my own configuration, copying it from standard 'BP_ACCOUNT_FS':
Config key: my own, for my business role
Component usage: <DEFAULT>
Object Type: 'BP_ACCOUNT_FS'
Object Subtype: <DEFAULT>
After confirming Business Partner I can see the fact sheet I defined.
But my task was to see the fact sheet of the business partner when I select it in a call list, before I confirm it. And there was ABAP.
Regards,
Andrew.

Navigation Bar & Work areas not appearing in CRM Webclient User Interface.

Dear all,
We are into SAP CRM 6.0 implementation. I have created a new Business role (ZIC_Agent) copying the standard one IC_Agent
I have assigned default layout profile, role key and the assigned navigation bar profile is ZIC_Agent, which is copied form standard navigation bar profile (IC_Agent).
I have assigned the role to a Org unit in the Organization Model.
But when I try to execute the Webclient UI, it is not showing the Navigation bar and work area in the screen, whereas it is working absolutely fine with another standard business role (Servicepro) which has already been assigned in the system.
I could not understand that, why I am getting this error.
I request you to help me in resolving the issue. Your suggestions will be highly appreciated.
Best regards
Edited by: Raghu Ram on Feb 25, 2009 7:43 AM

Hi Raghu Ram,
To do a quick testing if the business role is working properly, assign it to your user directly in transaction SU01.
Add parameter CRM_UI_PROFILE in SU01 for your user and give your Zbusiness role in the value (all caps).
If this is still not working, check the pfcg role that is assigned to the Business role and regenerate the authorizations. You can do this in transaction PFCG.
This should solve your problem.
Regards,
Padma

Z Business Role Creation

Hi,
I am new in CRM and i want to create a business role for a one is for custmoer and one for Call center Agent.
i know some tcode like CRM_UI_Profile and PFCG but dont know how to create it.
Can you explain me in Step by step manner or any privious Forums or link.
I have searched privious forums but i did'nt get expected.
jim

Hi,
the best way to create businessroles is to copy existing ones from SAP standard.
You will be able to do this in CRMC_UI_PROFILE.
For example for IC copy the complete role IC_AGENT to your customer role for example ZIC_AGENT.
Afterwards have a look into the entries and change everything you need.
If you need other navigation entries for example exchange the Navigation bar profile.
You can easily create your own navigation bar profile by copying an existing one in CRMC_UI_NBLINKS.
Good luck.
Kind regards
Manfred

Z Creation of Business Role

Hi,
I am new in CRM and i want to create a business role for a one is for custmoer and one for Call center Agent.
i know some tcode like CRM_UI_Profile and PFCG but dont know how to create it.
Can you explain me in Step by step manner or any privious Forums or link.
I have searched privious forums but i did'nt get expected.
jim

Hi Jim,
Yes you can create a Z Buisness Role in the crmc_ui_profile (img activity>>CRM>>Business Roles>>Define Business Role).
A business Role is made up of several things namely -
1.Role Config Key : You can create a new or use existing ones.
2.Navigation Br Profile
3. Layout Profile
4.Technical Profile
5.PFCG Role ID
Navigation Bar profile is specific to different business roles. It defines what all links you see on the left hand navigation pane on Web UI. E.g. a marketing professional would see different links than a sales pro or a call center agent.
Similarly you can define other profiles or the use the default profile.You can create a pfcg role id in t-code pfcg and assign it your business role.
Jim, what would be best is to copy a standard role, e.g IC_AGENT and then customize it according to your needs and change the config key, nav bar, layout, and technical profile as per your requirements.
Thanks and Regards
Varun Taneja

Navigation Bar Profile - Copying business role SalesPro

Similar Messages

Maybe you are looking for