Navigation bar stopped working

I was using Apache and installed IIS after that some of my
buttons stopped working. When I copy the website to my laptop, it
still works fine. What's going on? Please help!!!!

The navigation bar certainly works, but it is very fussy about the precise positioning of the cursor, which I find needs to be slightly higher than expected in order to activate the links. (Notice the difference between these and the email hyperlink down the page.) The outline of the top image on your Welcome displays while it loads, I noticed that its top edge coincides with the centre of the navigation bar, and I suspect this is what's causing the problem. Repositioning this so as not to impinge on the navigation bar would definitely improve the situation.
Similar behaviour is apparent on the Photos and Words pages (in the case of the latter, only the first four items on the navigation bar are affected, the ones which coincide with the image of the Penn Valley Directory). Take a look at your image positioning in iWeb. Turn on Show Layout. That often gives an immediate visual answer to problems such as this. As a general rule of thumb, it's advisable not to overlap the navigation bar with any other items.

Similar Messages

Welcome page navigation bar stopped working

I just made a few changes to my welcome page. Not sure what happened but the navigation bar at the top no longer works. It works on the other pages. At one point I retitled the page to "home" and it seems like that may have screwed things up. Now I can't figure out how to get it to work. Any ideas? It is iWeb 3.0.4

figured out the problem. I made some links on the welcome page to the same pages as the nav bar and made the bar stop working for some reason.

My MP Navigator has stopped working. Help!

Help! My MP Navigator has stopped working for some reason. I am on Windows 7. My All-in-one printer is a Pixma MX437.

First check System Preferences/Sound - check all the settings to make sure mute is not selected.
Repair permissions & restart.
Troubleshooting issues with no audio from built-in speakers on Macs
Open up GarageBand if installed then, open a program (optional).
Quit out of the GarageBand app.

MP870 MP Navigator EX 3.1 Error Message: "MP Navigator has stopped working"

Hello
I have a MX870 multi function inkjet. The scanned is the most important thing for me. BUt all of a sudden The software went crazy and cannot load. Everything was working fine up until a few weeks ago.
The error message from Windows is: MP navigator has stopped working then it gives me the option to debug or close. Either way nothing makes it work.
I am running it on Windows Vista Home Premium (service pack 2) . Device is connected via USB.
I have read other posts about the twain 32 folder but they refer to other operating systems such as windows 7. I also tried reinstalling the software. In fact, the cannon website where you can get support does not seem to have the model MX870. I had to select model MX876 which was the closest, in order to obtain a link to download the software.
Please help

PLEASE help!

My scrolling bar stopped working when I updated to firefox 3.6.9 and adobe flash 10.1

Never had a problem before, but when I just updated to Firefox 3.6.9 my scrolling bar stopped working. It still works in vistas explorer and wordperfect, just not firefox.
At the same time I updated to adobe flash 10.1 (I think). Whatever the latest version is.
thnaks

I have the same problem. I have never had a problem with Firefox before, and use it as my main browser. However recently, after updating to 3.6.8, its been crashing all the time. Up to 20 times an hour. Usually it occurs when I click a link from a Google search, or in Yahoo. Even if I send in a crash report and restart Firefox, it crashes as soon as the same page is brought back up, or the same link is clicked. I have also had it crash when completely idle. Its very frustrating as it is my favorite browser. I've resorted to using Google Chrome for the time being.

Search bar stopped working

since the last FF update (35), the search bar stopped working.

Make sure that you do not run Firefox in compatibility mode.
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
You can check if you have the XML files of the default search engines including Google in the browser\searchplugins folder in the Firefox program folder.
If not then you need to reinstall Firefox.
You can find the full version of the current Firefox 36.0.4 release in all languages and for all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
Try to delete the search.json file and possible search-metadata.json and search.sqlite files in the Firefox profile folder to reset the search engines to the default.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox will rebuild the search.json file from the default search engines in the "browser\searchplugins" folder in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

V570 scroll bar stops working

My touchpad scroll bar stops working on my v570. When It stops I run a system restore and it comes back, but in a few days it stops working again and I have to system restore AGAIN. I stopped my system updates from Windows as advised, but still have the problem. My driver is current and "This device is working properly" when I look at the driver. Someone please help, this is quite an annoyance!

could be driver issue. have you tried to update the drivers?
also, you may need to change the settings. ( see the image )
link to image

Open url from top navigation bar in work area

Hi.
I added in top navigation bar one link (component CRMCMP_HDR_STD, view MESSAGE). How i would like to show content of that url in workarea of web ui window.
I know that I can call url with href, but the problem is that this url content is then shown in that top navigation bar which is very small. I also know how to show that content in new window.
But as I said Iwant to show it in workarea window. Like for example if you click on Personalization link in navigation bar.
I checked how this Personalization call works in standard but it is somewhove hardcoded.
Any ideas? Help will be appreciated.

I would have even bettter requirement. I developed Z component. And I want to call this Z component from navigation bar link (component CRMCMP_HDR_STD, view MESSAGE).
But as I said, I don't want to open that Z compoennt instead of CRMCMP_HDR_STD component in top bar, but in workarea. The requirement is similar as when you would click on any option in left navigation bar, which then opens component in workarea. But I don't want to launch my Z component from left navigation bar (which I know how to use), but from top navigation bar.
Help appreciated.

Navigation bar not working cannot add a new one says there is a warning but does not indicate what kind of warning

In the space where you would add a widgit there is a warning so a new navigation bar cannot be added. I tried uninstalling and reinstalling but that did not help. When I pulishedd my website the navigation bar did not work. It only linked to one page but I cannot fix the problem because of the warning.

Hi
Are you creating a manual menu and while adding another menu item you are facing error ?
Please elaborate more as what are the steps you are taking and upload screenshots of navigation bar that you are using in design mode , if site is published then share the url.
Thanks,
Sanjit

Custom Navigation bar not working. Apple can't seem to help

After watching many videos on people customizing their Navigation bars on Iweb, I decided to do the same for my website. If you go to the home page of my site I can click on any link and have no problem. However, once I am off of the home page I cannot get any of the other links to work. I took my mac to the apple store and they showed me how to fix it. But it didn't help. Nor has there been any useful advice from calling their tech support. Any ideas on how to fix this would be appreciated.
Rev. Paul

So if you have a custom made nav bar that works okay on the home page, but not on the other pages of your site, did you remember to go and hyperlink your nav bar on the other pages of your site and not just your home page, or did you forget?
That is one reason why they will not work, if you forgot to hyperlink - you either have to hyperlink first and then copy and paste or do each page individually - it is time consuming, but is the price you pay for having a custom nav menu.
A url would be nice so we can see what is going on.

Iweb navigation bar not working in Internet explorer 8

iweb 09
I published my site to the sites folder on my imac OSX 10.6.4
Built my own navigation bar and the links work fine in Safari & Firefox
The only portion of the Nav bar that works in Explorer 8 is the Map Navigation which links to an external page (map quest)
All The links work in Explorer 7 (but none of the images show up)
Anyone have a solution
I'm loosing it!

External links tend to be more robust than internal. Having said that there is no good reason why this should happen in IE V8. I've certainly never had this problem.
If they definitely don't work for you then try recreating your navigation using the URL for each page.
What images don't show up in IE 7?

Space bar stops working while texting

My ihpone 5 is only a few days old and it's my first iphone.
Twice today while I was texting, the space suddenly stopped working. The cursor would advance as if I had typed a period, and start a new sentence with a capital letter, but would only back space as far as where the space bar wouldn't work. I could not back up past that point and could only go forward if I started a new sentence. Has this happened to anyone else?

I agree with others, this doesn't sound like a ML problem. It is either a H/W problem, or..., it is possible that something got into the keyboard. For example, if you were eating around it, perhaps some type of crumb got under the key. That would do it too.
You can try this: http://www.youtube.com/watch?v=kh88cn_rtLo
This can be a pain if you haven't done it before. But worth a try if you'd have to otherwise pay for a new keyboard (and if it is a crumb versus a bad switch/button).

Chambers dictionary search engine in search bar stopped working.

Chambers dictionary search engine stopped working in Firefox search bar. Results go to 404 error page: http://www.chambersharrap.co.uk/chambers/chref/chref.py/main?query=recap&title=21st&sourceid=Mozilla-search

Hi p4wel,
delete it from search bar and install it again from : http://mycroft.mozdev.org/search-engines.html?name=chambers
thank you

Buttons on navigation bar not working??

Hello all, I am in a web design class and im currently wokring on my website. When i made my navigation bar in adobe fireworks and saved/exported it then tried to open it in dreamweaver cs6. The way i did this was insert>image objects>fireworks HTML then selected the html version of the nav bar. But for some reason when i try to do live view or open it in browser the buttons don't work, they worked when I opened them from fireworks. Someone help please :/

The old Fireworks code relied on javascript for the menus. If the javascript file is not in the proper location or is missing then the menus will not work. In order to tell if this is the page we would need access to a test page online to view your code. In case this is not possible, I am also including a link to the KB article discussing how this process works from FW to DW to explain all of the steps.
Macromedia Fireworks - Working with Macromedia Fireworks MX buttons and navigation bars : Export the navigation bar

NB100 touchpad scroll bar stops working after exit full screen mode youtube

I have few Toshiba laptops, satellite, and now netbook100.
All of them share one problem, touchpad scroll bar:
It will stop working after exit full screen mode in youtube.
Here is how to reproduce the incident:
1. using any mainstream browser, start playing a youtube video, click full screen button at the bottom right corner of the video.
2. click on the [cross] to exit the full screen mode. (next to full screen button.)
3. check if you scroll bar still functioning.
4. a reboot will restore the function.
Currently, Im on vista, I believe in XP you will have the same problem.
Searching in google (touchpad scroll bar stops full screen youtube) will return more people share the same question but no answer.
Environments: win xp all, win vista all.
Windows all most updated driver, touch pad driver up to date.
This is not a major tech problem but for a netbook, this is very annoying.
If anyone have this problem or answers, please share it here.
Thank you in advance.
regards.

I had the exact same problem on my laptop and after a lot of searching, I finally found the simplest solution that really works for me so here goes:
Once you exit the full screen video and the scroll pad has stopped working, click once anywhere on the youtube page(just to unfocus from the video) and press the spacebar button on your keyboard twice.
Et voila, your scroll pad should be working again. Beats the hassle of having to log off everytime.
Hope this helps

Navigation bar stopped working

Similar Messages

Maybe you are looking for