Navigation Bars not working as expected...

role based navigation...
We have 7 different roles with a different page look and feel
for each role.
Based on each role, portlet layouts and page contents will be
different.
We need to drive tabs and pages based on these roles...How do we
do that?
The second, related part of the problem is creating navigation
bars based on those user roles. We have pretty much a static set
of navigation bars to show. But, since there are 7 different
pages, we need to know how to point the links within
each "navigation button" to the current page, showing the
contents of the link INSIDE the current page.
Refer to:
http://portalstudio.oracle.com/servlet/page?
pageid=1768&dad=ops&_schema=OPSTUDIO&7562_MAINPAGE_39847486.p_s
ubid=40679&7562_MAINPAGE_39847486.p_sub_siteid=73&7562_MAINPAGE_3
9847486.p_edit=0&7560_MAINPAGE_39847486.p_subid=40679&7560_MAINPA
GE_39847486.p_sub_siteid=73&7560_MAINPAGE_39847486.p_edit=0
as an example of what we need to do.

I can't suggest anything other than the features you're already
aware of. You can have different tabs on a page with different
privileges on each tab - users will only see the tabs for which
they are authorized. Similarly, users will only see the
portlets for which they are authorized. If those security
features don't work for you, then the next release of Portal
(iASV2) will support function-based security, where you can
write a procedural rule that executes at run time.
The portalstudio link doesn't work, so I'm not sure what you're
referring to.
Regards,
Jerry

Similar Messages

  • Navigation bar not working cannot add a new one says there is a warning but does not indicate what kind of warning

    In the space where you would add a widgit there is a warning so a new navigation bar cannot be added.  I tried uninstalling and reinstalling but that did not help.  When I pulishedd my website the navigation bar did not work.  It only linked to one page but I cannot fix the problem because of the warning. 

    Hi
    Are you creating a manual menu and while adding another menu item you are facing error ?
    Please elaborate more as what are the steps you are taking and upload screenshots of navigation bar that you are using in design mode , if site is published then share the url.
    Thanks,
    Sanjit

  • Custom Navigation bar not working. Apple can't seem to help

    After watching many videos on people customizing their Navigation bars on Iweb, I decided to do the same for my website. If you go to the home page of my site I can click on any link and have no problem. However, once I am off of the home page I cannot get any of the other links to work. I took my mac to the apple store and they showed me how to fix it. But it didn't help. Nor has there been any useful advice from calling their tech support. Any ideas on how to fix this would be appreciated.
    Rev. Paul

    So if you have a custom made nav bar that works okay on the home page, but not on the other pages of your site, did you remember to go and hyperlink your nav bar on the other pages of your site and not just your home page, or did you forget?
    That is one reason why they will not work, if you forgot to hyperlink - you either have to hyperlink first and then copy and paste or do each page individually - it is time consuming, but is the price you pay for having a custom nav menu.
    A url would be nice so we can see what is going on.

  • Buttons on navigation bar not working??

    Hello all, I am in a web design class and im currently wokring on my website. When i made my navigation bar in adobe fireworks and saved/exported it then tried to open it in dreamweaver cs6. The way i did this was insert>image objects>fireworks HTML then selected the html version of the nav bar. But for some reason when i try to do live view or open it in browser the buttons don't work, they worked when I opened them from fireworks. Someone help please :/

    The old Fireworks code relied on javascript for the menus.  If the javascript file is not in the proper location or is missing then the menus will not work.  In order to tell if this is the page we would need access to a test page online to view your code.  In case this is not possible, I am also including a link to the KB article discussing how this process works from FW to DW to explain all of the steps.
    Macromedia Fireworks - Working with Macromedia Fireworks MX buttons and navigation bars : Export the navigation bar

  • Please help: navigation bar not working

    I've just created a website with 5 main pages that appear on the navigation bar. When I upload the site, only the first two are working. I can access the other three from the main page but when I am in those pages, I cannot access any other pages through the navigation page. I have to click the back button to previous page in Safari. Can anyone help me work out why the navigation bar may not be working?
    If I can't get it to work, will I have to move to dreamweaver for Mac or similar software to set up a website. I hope not as iWeb is user friendly - although I also note I cannot create drop-down menus.

    There appears to be some sort of shape over the navbar links in the last three pages of the site. You can see it if you type Command+A while viewing the pages. Don't know what it is but make sure there are not objects, text boxes, etc. overlapping the navbar. Also make sure the navbar is located entirely within its area and not overlapping into the body area.

  • Navigation bar not working

    The menu works in iWeb, but not when I publish my site. I have some dummy blog, about me, and photo pages uploaded. I can't seem to use the nav bar to get to them though:
    web.mac.com/nickyanez/iWeb/ThatNickGuy
    PB G4 17 Mac OS X (10.4.4)
    PB G4 17    

    he has changed something since the first time I saw it. It had a hyperlink in the header text above the menu bar and the menu bar did not work. not sure what he did now

  • Iweb navigation bar not working in Internet explorer 8

    iweb 09
    I published my site to the sites folder on my imac OSX 10.6.4
    Built my own navigation bar and the links work fine in Safari & Firefox
    The only portion of the Nav bar that works in Explorer 8 is the Map Navigation which links to an external page (map quest)
    All The links work in Explorer 7 (but none of the images show up)
    Anyone have a solution
    I'm loosing it!

    External links tend to be more robust than internal. Having said that there is no good reason why this should happen in IE V8. I've certainly never had this problem.
    If they definitely don't work for you then try recreating your navigation using the URL for each page.
    What images don't show up in IE 7?

  • Navigation bar stopped working

    I was using Apache and installed IIS after that some of my
    buttons stopped working. When I copy the website to my laptop, it
    still works fine. What's going on? Please help!!!!

    The navigation bar certainly works, but it is very fussy about the precise positioning of the cursor, which I find needs to be slightly higher than expected in order to activate the links. (Notice the difference between these and the email hyperlink down the page.) The outline of the top image on your Welcome displays while it loads, I noticed that its top edge coincides with the centre of the navigation bar, and I suspect this is what's causing the problem. Repositioning this so as not to impinge on the navigation bar would definitely improve the situation.
    Similar behaviour is apparent on the Photos and Words pages (in the case of the latter, only the first four items on the navigation bar are affected, the ones which coincide with the image of the Penn Valley Directory). Take a look at your image positioning in iWeb. Turn on Show Layout. That often gives an immediate visual answer to problems such as this. As a general rule of thumb, it's advisable not to overlap the navigation bar with any other items.

  • Background Image in Nav Bar Not Working in IE 6 (but ok in 7 and Firefox 2)

    Hi gang,
    I'm having a bit of a problem with a background image for a navigation bar not appearing in IE 6. I've also tested it in IE 7 - it works perfectly, as it does in Firefox 2.
    http://www.iainmoran.com/update/test.html
    The really strange thing is the part of the bar after "Contact" IS fine in IE 6.
    Also, is there any way to remove unused styles (in an external CSS) in DW? Just it would be a pain to go through and remove the styles I've tried, but then later decided not to use.
    Thanks again,
    Iain.

    Have you contacted Project VII support or searched their knowledge base?
    http://www.projectseven.com/support/index.htm
    Also, is there any way to remove unused styles (in an external CSS) in DW? Just it would be a pain to go through and remove the styles I've tried, but then later decided not to use.
    Not exaclty a DW answer, but I've used the free FireFox add-on to help me find unused selectors. Point it to a sitemap.xml and it can spider the whole site (as listed in that xml file).
    https://addons.mozilla.org/en-US/firefox/addon/5392
    But be careful with it. It apparently doesn't read JavaScript and your PMM triggers are actually used.
    Mark A. Boyd
    Keep-On-Learnin' :-)
    If you are reading this via email, be aware that it may not be an accurate representation of my message. Login to read the actual message and/or to reply.

  • Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

    My problem is pretty easy to reproduce.
    I created a project from scratch with a view model.
    As you can see in the setter of "Age" property I have a simple logic.
        public class MainViewModel : INotifyPropertyChanged
                public event PropertyChangedEventHandler PropertyChanged;
                private int age;
                public int Age
                    get
                        return age;
                    set
                        /*Age has to be over 18* - a simple condition in the setter*/
                        age = value;
                        if(age <= 18)
                            age = 18;
                        OnPropertyChanged("Age");
                public MainViewModel(int age)
                    this.Age = age;
                private void OnPropertyChanged(string propertyName)
                    if (this.PropertyChanged != null)
                        PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    In the MainPage.xaml 
         <Grid x:Name="LayoutRoot" Background="White">
                <TextBox 
                    Text="{Binding Path=Age, Mode=TwoWay}" 
                    HorizontalAlignment="Left"
                    Width="100"
                    Height="25"/>
                <TextBlock
                    Text="{Binding Path=Age, Mode=OneWay}"
                    HorizontalAlignment="Right"
                    Width="100"
                    Height="25"/>
            </Grid>
    And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
        public partial class MainPage : UserControl
            private MainViewModel mvm;
            public MainPage()
                InitializeComponent();
                mvm = new MainViewModel(20);
                this.DataContext = mvm;
    I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
    Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
    Case 1: Debugger is attached =>
    TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
    Case 2: Debugger is NOT attached => 
    TextBox value will be "18" and TextBlock value will be "18" - CORRECT
    It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
    Has something changed in SL5 and logic in setters is not allowed anymore?
    Configuration:
    VisualStudio 2010 SP1
    SL 5 Tools 5.1.30214.0
    SL5 sdk 5.0.61118.0
    IE 10
    Thanks!                                       

    Inputting the value and changing it straight away is relatively rare.
    Very few people are now using Silverlight because it's kind of deprecated...
    This is why nobody has reported this.
    I certainly never noticed this problem and I have a number of live Silverlight systems out there.
    Some of which are huge.
    If you want a "fix":
    private void OnPropertyChanged(string propertyName)
    if (this.PropertyChanged != null)
    //PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    Storyboard sb = new Storyboard();
    sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
    sb.Completed += delegate
    PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    sb.Begin();
    The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
    Please don't forget to upvote posts which you like and mark those which answer your question.
    My latest Technet article - Dynamic XAML

  • Subtraction of two key figures normalized to result not working as expected

    Hello SAP Community!
    I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
    In order to explain the problem I am facing please analyze below text:
    1) Let's assume I have below data:
    LOAD MONTH  PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
    200805         PLANT-A  MAT-1            200805         510,235.00
    200805         PLANT-B  MAT-1           200805          74,240.00
    200805         PLANT-A  MAT-1           200806         438,721.00
    200805         PLANT-B  MAT-1           200806          74,240.00
    200805         PLANT-A  MAT-1           200807         356,981.00
    200805         PLANT-B  MAT-1           200807          74,240.00
    200806         PLANT-A  MAT-1           200805               0.00
    200806         PLANT-B  MAT-1           200805               0.00
    200806         PLANT-A  MAT-1           200806         510,235.00
    200806         PLANT-B  MAT-1           200806          74,240.00
    200806         PLANT-A  MAT-1           200807         438,721.00
    200806         PLANT-B  MAT-1           200807          74,240.00
    2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Comparison Units (June 2008) 510,235.00  438,721.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Comparison Units (June 2008)  74,240.00   74,240.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
    we normalize forecats to results an we get the below report:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
    units, for both number of units and %. The report now look as below:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  1.77%       2.74%
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %  -1.77%      -2.74%
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    5) PROBLEM:
    In my report, the "Delta base vs. comp. units %" is not working as expected and
    calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
    So my report looks as follows:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  71,514.00  81,740.00 <<<WRONG!!
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %       0.00        0.00
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    The formulas are:
    a) Delta base vs. comp. units %
      Delta base vs. comp. units % = Comparison Units % - Base Units %
    b) Delta base vs. comp. units
      Delta base vs. comp. units = Comparison Units - Base Units
    The KFs
    - Comparison Units %
    - Base Units %
    Are RESTRICTED key figures (restricted to Base and comparison month variables) which
    are setup as:
    1) Calculate Result As:  Summation of Rounded Values
    2) Calculate Single Value as: Normalization of result
    3) Calculate Along the Rows
    The KFs
    - Delta base vs. comp. units %
    - Delta base vs. comp. units
    are FORMULAS setup to:
    1) Calculate Result As:  Nothing defined
    2) Calculate Single Value as: Nothing defined
    3) Calculate Along the Rows: user default direction (grayed out)
    Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
    Any help is highly appreciated.
    Thank you.
    Mario

    Hi,
    The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
    I hope this will solve your issue.
    Regards,
    S P.

  • Events in SubVi not working as expected

    Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
    I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Main.vi ‏11 KB
    SubVi.vi ‏12 KB
    SubVi_2.vi ‏15 KB

    Your main problem is DATA FLOW.  A loop cannot iterate until EVERYTHING in it has completed.  So, as you have it, you have to have both event structures execture before you can go back to look for the next event.  So if you insist on having these subVIs, they need to be in seperate loops.
    BTW, you can get away with a single subVI.  Go into the VI properties and make it reentrant (preallocated clone).  Then each call of your subVI will have its own memory space.  A lot easier to maintain that way.
    And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Main_MODTR.vi ‏10 KB

  • AFS ARUN Size Substitution Not Working As Expected

    Hi All,
    I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
    I have setup some examples but it does not work as expected.
    Here is a small example:
    Say I have a size 28/30, 28/32 .........29/30....
    What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
    with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
    Any inputs will be really appreciated.
    Thanks!!

    srdfrn wrote:
    Hi YOS,
    I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing.  Would you mind posting an example (alongside an image file) that demonstrates this?
    Also, one thing I noticed is that PCX images appear to be quite dated.  Could upgrading them to a JPEG or PNG format be an option for you?
    Thanks,
    Stephanie R.
    National Instruments
    Stephanie, thanks for the reply.
    I am very sorry to state that I made a mistake.
    VAL_SIZE_TO_IMAGE indeed works.
    What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
    I tried with JPEG and it's the same.
    I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
    A panel with two picture rings.
    - SW_1 remains at the intended size and the loaded picture is not clear.
    - SW_2 will fit to picture size and looks OK.
    Appreciate your support,
    YOSsi Seter
    Attachments:
    Load_Image.c ‏2 KB
    ONEP_3Trow_POS1.JPG ‏4 KB

  • Notification "Launch the app and go to the library" not working as expected

    Hello,
    we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
    Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
    Thanks
    Martin

    Ah.
    Ok, now it's clear.
    Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
    Martin

  • DB Adapter polling as singleton process is not working as expected

    Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
    As suggested in oracle documents , below is the parameters configured in composite.xml file.
    <service name="polling_Mange_Alert_Events"
      ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
    <interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
      <binding.jca config="polling_Mange_Alert_Events_db.jca">
      <property name="singleton">true</property>
      </binding.jca>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
      override="may">1</property>
      <property name="jca.retry.backoff" type="xs:int" many="false"
      override="may">2</property>
      <property name="jca.retry.maxInterval" type="xs:string" many="false"
      override="may">120</property>
      </service>
    Below is the JCA file parameters configured :
    <adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
      <endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
        <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
          <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
          <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
          <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
          <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
          <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
          <property name="MarkReadValue" value="Processing"/>
          <property name="PollingInterval" value="10"/>
          <property name="MaxRaiseSize" value="5"/>
          <property name="MaxTransactionSize" value="5"/>
          <property name="NumberOfThreads" value="1"/>
          <property name="ReturnSingleResultSet" value="false"/>
          <property name="MarkUnreadValue" value="Pending"/>
        </activation-spec>
      </endpoint-activation>
    </adapter-config>
    This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
    Please advise to solve this issue ?

    Hi,
    1.Set Singleton property outside   <binding.jca> like this:
    <binding.jca config="polling_Mange_Alert_Events_db.jca"/>
      <property name="singleton">true</property>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
    2.Also you can try setting these values in jca file:
    <property name="RowsPerPollingInterval" value="100"/>
    <property name="MaxTransactionSize" value="100"/>
    3. try to increase the polling interval time.
    Regards,
    Anshul

Maybe you are looking for