Navigation between diagrams on a SharePoint process repository

We have created a process diagram repository on Sharepoint 2010. Visio services is enabled on the site. The library is set to open documents in the Browser by default. The documents are stored as web diagram (*.wdv) in odrder to enable visitors to view them
without Visio installed on their workstation. Individual process documents can viewed OK.
We would now like to create hyperlinks between documents so that visitors who want to see the details of a subprocess task described in another document can jump to it by ctrl+clicking on the hyperlink, all this without leaving the browser window.
Yet, when I try to do it, the browser wants to open the linked document in Visio but does not display it using visioWebaccess.
Wen the subprocess detailed diagram is stored within the same document as a separate page, navigating from one page to another is not an issue. What we would like is to extend this seamless navigation to pages in different Visio web drawings stored in the
same library.
How can this be achieved ?
Bertrand

Hi,
Is the file format you mentioned is .vdw file instead of .wdv file?
And are the hyperlinks file format are also .vdw files?
Based on my research, published Visio diagrams can include hyperlinks which allow users to navigate to: other pages in the same diagram, other pages in other published diagrams, even other
sites using standard URLs, when the diagram is published to Visio Services as a Visio Web Drawing (VDW) file.
For more infroamtion, please refer to the link below:
http://blogs.msdn.com/b/chhopkin/archive/2011/01/10/navigating-hyperlinks-in-the-visio-web-part-with-web-part-connections.aspx
Jaynet Zhang
TechNet Community Support

Similar Messages

Business Process Repository Server connection difficulties

All,
We have Business Process Repository installed and can connect to it on the same machine but are unable to connect from any remote machine.
It would appear therefore that this is some sort of configuration issue, and I see many discussions of this same problem online but no clear or direct resolution given.
Is there a clear source of information anywhere about how to get remote access going? Do others have similar experiences?
All help most appreciated. Thanks.
Andrew Bernard

Hi Andrew,
Looks like your repository server and the client machines that are unable to connect to repository are in different sections on yr LAN. have you checked at the firewall for required ports to be opened for comminucation between Client and repository server?
You can get the list of ports in the admin documents or can directly ask Oracle support for it.
Regards
Gaurav Shrama :)

How to downloadin Business Process Repository in Solution Manager?

Hello,
Does anybody know how to download whole Business Process Repository from solution manager?
I know how to download BPR, that are related to project, to excel file, but I want to download all the scenarios,processes are inbuilt to the Solution Manager business blueprint.
Can anybody help me?
Thanks,
Mahantesh

Hello Mahantesh,
I suppose that your idea behind this question is that you would like to browse the contents of the BPR. For this specific pupose, SAP will deliver a new web dynpro application with SAP Solution Manager 4.0 SP 12 and the respective stack coming out mid June 2007 which allows you to browse all BPR contents in your SAP Solution Manager system. So you no longer have to create a seperate project and select the contents via F4 value help in SOLAR01 in order to access the contents.
For further updates, please check the news mid June:
<a href="http://service.sap.com/solutionmanager">http://service.sap.com/solutionmanager</a>
Media Library -> Technical Papers. It will probably be called: "4.0 Support Package Stack <latest stack> [probably stack 12]"
However, please note that an individual download of the entire or partial BPR structures into MS Excel will not be possible.
Best regards,
Doreen Baseler

Navigation between different componets in IC Web Client for CRM 7.0

Once the user click save button in component ICCMP_BT_BUTTON I need to navigate to component ICCMP_BT_SVO that displays the Service Order Data and display the new Service Request that was created.
How can I do navigation between different componets in IC Web Client for CRM 7.0?
Thanks.
Rodolfo Miã

Hello,
You can find detailed presentations in the learning maps available on the SAP Service Marketplace http://service.sap.com/rkt-crm for release CRM 2006s, CRM 2007, or CRM 7.0. In case I didn't mention it before, Intent-Driven Interaction (IDI) was first introduced and is only available starting with CRM 2006s and above. In the Interaction Center area, there is a presentation called "Rule Based Automation and Guidance" which covers IDI. I'm not sure if you can access the URL directly, but just in case here it is: [https://websmp104.sap-ag.de/~sapidb/011000358700001162852007E].
Warm regards,
John

What is a Business Process Repository and where do we get it in SAP?

Hi,
What is a Business Process Repository and where do we get it in SAP?

Hi,
Here is an another way to look at the BPR-Business Process Repository delivered by SAP.
1. Add the Web Dynpro application Business Process Repository (BPR) to your Favorites:
2. Choose Favorites Add Other Objects Web Dynpro Application in the SAP initial screen.
3. Enter SM_BPR_OVERVIEW in the field Web Dynpro Application.
4. Enter a description like ex. SAP BPR
5. Save your changes.
6. Now Call the saved - Web Dynpro application SM_BPR_OVERVIEW
7. You can see the BPR in a new browser window.
This info is available in SAP Help on Solution Manager.
Hope this helps.
Kathir

Communication between thread in the same process using file interface.

Hi,
I am developing driver and i need to communicate between two thread.
>can anyone guide me on implementing communication between two thread in the same process using File Interface. First thread will be driver and second will be application.I need to send IOCTL like commands using File interface ie is WriteFile(),ReadFile()
from Host process to driver through file-interface(which run's in driver context).Host process should not be blocked for the duration of the driver to process the command.
>File-interface will run in driver context and it will be responsible to receive command from application and pass it to the driver.
what are the complexity introduced?
>Can anyone also give me the link/reference to get more information on this topic?
>How to replace IOCTL command's for instance baud _rate change command with a file interface for example with IRP.

Here is the detailed query:
Hardware Abstraction Layer will interact with Driver(Both will be running in complete different process) .there is a IOCTL for command and File interface for read and write.
My requirement is:
Both should run in the same process so HAL will run as one thread and driver as another thread in the same process .I don't want HAL to wait for completion of request and also i don't want driver to be blocked .
We are planning to use a File Interface for communication between Hardware abstraction layer and Driver
HAL will send the command or read/write operation to a file interface and driver will get the command or read/write request from the File interface
There is a flexibility to change Hardware Abstraction layer and also the Driver
Is it possible to use IOCTL between two thread under same process? if not what other options do we have.
Can we use File interface to send command (like IOCTL) between two thread?

Difference between business activity and service process in transaction

Hi Friends,
Can anyone explain me the difference between business activity and service process in transaction category of service desk
Thanks & regards,
Shanmugam Balamurugan

Hi,
Activity means e.g.. sales call, customer visit etc.
But service process means after you sale your product if some service related issue arrives then that is taken care by this transaction.
Inspire by rewarding.
Regards,
Nikhil

Switching between page layout and word processing

I can't seem to switch between page layout and word processing view. I've read all the posts on this and still can't figure out why I can't just type a document into Pages. The only option I have in page layout view is to type into text boxes, which is not what I want. I just want to type a letter for crying out loud.
Before I get all the rants about reading User Guides, etc. *I have*. I've also searched on here and in-app help and just don't understand the fuzzy/non-existant answers. Obviously, I'm a newbie, so please don't jump all over me for this. If it was Word - I could do this in NO time. I just find it incredibly frustrating that inputting a normal document should be so difficult.
Is "Pages" *not* a word processing program? Is it just a cut and paste application? Sorry for the tone - I mean no disrespect - it's just that I've been fooling around with this for DAYS and I just don't have time to spare anymore. I really need to get this done.
Can somebody give me a straightforward answer on how to just type a normal document into pages without using text boxes?
Thanks and I apologize for not being mac-savvy. It took some of us a lot longer to see the light =)

Here is a script doing the conversion task for you.
Open a Page Layout document
run this script:
--{code}
set p2t to (path to temporary items from user domain) as text
set path_2_doc to p2t & (do shell script "date +_%Y%m%d_%H%M%S.doc")
tell application "Pages"
save document 1 in path_2_doc
open file path_2_doc
end tell
--{code}
that's all folks.
Yvan KOENIG (VALLAURIS, France) lundi 20 juin 2011 18:03:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Process not found in Process Repository (Cons) after transport

Hello everyone,
I have a NWDI track with all SC's that I need. After test all in my DEV system (develop on track, deploy) I tried to transport my escenario :
1. Activities on track, all components and sources are there. Check In and Activate sucessfull.
2. Transport view: Release a waiting activity. Sucessful.
3. Verify entry in my CMS, is fine. Import request in Consolidation tab. Sucessfull.
4. In CBS Buildspaces, I can find my DC in DEV and CONS, without pending activities.
5. In development components I can see my DC in both sides too.
6. But I can't find the process in PROCESS REPOSITORY.
So, I miss something on the way?
Please, I will apreciate any help.
Regards,
Carlos Andres.

No, actually is a first transport that we tried to do, is a new installation. The basis team create a track like follow:
DEV - CONS - TEST - PRD, where CONS and TEST are the same server with the same parameters. I dont know if this is a mistake.
thank u for your response,
Carlos Andres

How to navigating between layers?( as if they were pages of a book?)

I need a good advice on design and navigating between some different layers.
I am a Adobe Director user, and I am used to think of “navigating between frames”. also frames as pages of a book, while in flash time-frames.
In Director one can navigate between different frames with each containing many components.
And this does not make any conflict since the frames are some kind of pages of a book, you go to any page you want and back again.
I am designing math training application in falsh-CS6, in which the user should be able to navigate from start-menu by choosing an
exercise number and then go to the wanted exercise and then create an exercise by a create_excercise button, there back again to menu to choose another and so on. How I can do it clean in flash?
As I see I have to place everything in the same “frame” in flash, and it becomes little practical and confusing since there
are many things all gathered in the same frame, where they should instead appear in their respective “pages”.
I have done some works in flash: made 4 layers in flash with the following contents:
layer 1: for my menu( contains 3 buttons, q1bt, q2bt, q3bt)
layer 2: for question 1( contains 3 buttons makeQ1bt, chekAns1bt, and gotoMenuBtn)
the same is for layer 3 and 4.
I see no options rather than making different components visible or invisible whole way! but is there a better way?
I appreciate any help.

Flash does allow more than one frame - that is one of the foundations of working with it. You can restrict yourself to using just one frame if you like, but it is not required and very often people use the timeline instead of keeping things in one place.
I have no familiarity with Director, but what you just described sounds like designing using the timeline of Flash. With Flash you can use the timeline in the fashion you just described where different pages occupy different frames of the timeline and you can navigate from one to another. You are not stuck with one frame in Flash... you can create a new keyframe at any point along the timeline and add new/different content to it, while retaining a menu that exists across all pages (or not - it's your choice)..

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Navigation between records in a JSP application

Hi,
I would like to know how to provide navigation between records in a tabular form liked JSP application using JDeveloper 3.2
without using the Oracle or Default template.
I can do it with a singular record view but not in a tabular view. I like to know now I can mimic the navigation provided in Oracle template in which the current selected record is hightlighted. Can we navigate between records using Up and Down
arrow key like in Oracle form instead of using Navigation Bar. Please provide details code.
Thanks a bunch,
Khanh Hoang

You can refer to the source code in jbohtmlsrc.zip for deriving your own implementation.

How to define the dynamic navigation between two component in web ui

Hi All,
I have a requirement to create a new assignment block in accounts overview screen .
1.Created new view(Table view) in the BP_HEAD component.
2.Created new button on the table view toolbar .
3.If the user clicks the new button it should navigate to interaction log component(BT126H_CALL).
Please hekp me step 3 how to do .
I have checked planned activity assignment block in the account but is dynamic navigation.
Please explain me how to define the dynamic navigation between two components.
What is window delegate .
Thanks,
Venkyy

Hi ,
Kindly follow the link , this will be helpful for your issue :
http://wiki.sdn.sap.com/wiki/display/CRM/CRM-NavigatingtoyourcustomBSP+component

Pass data between InfoPath forms in SharePoint

Hello!
Maybe someone has ideas about the next issue: how to make pass data between InfoPath forms in SharePoint, like it is shown in a video: https://www.youtube.com/watch?v=-nGl-Se2cOQ
I've read similar topics, but still can't find solution.
Thank you.

When you go to modify the submit connection, you can specify whether or not to overwrite, as well as a default title value. If you use the now() function in the title, it should never have the same name.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Large number of http posts navigating between forms

Hi,
i'm not really a forms person (well not since v3/4 running character mode on a mainframe!), so please be patient if I'm not providing the most useful information.
An oracle forms 10 system that I have fallen into supporting has to me very poor performance in doing simple things like navigating between forms/tabs.
Looking at the java console (Running Sun JRE 1.6.0_17), and turning on network tracing, I can see a much larger number of post requests than I would expect (I looked here first as initially we had an issue with every request going via a proxy server, and I wondered if we had lost the bypass proxy setting). Only a normal number of GETS though.
Moving to one particualr detail form from a master record is generating over 300 post requests - I'v confirmed this looking at the Apache logs on the server. This is the worst one I have found, but in general the application appears to be extremely 'chatty'
The only other system I work with which uses forms doesn't generate anything like these numbers of requests, which makes me think this isn't normal (As well as the fact this particular form is very slow to open)
This is a third party application, so i don't have access to the source unfortunately.
Is there anything we should look at in our setup, or is this likely to be an application coding issue? This app is a recent conversion from a forms 6 client server application (Which itself ran ok, at least this bit of the application did with no delays in navigation between screens).
I'm happy to go back to the supplier, but it might help if I can point them into some specific directions, plus i'd like to know what's going on too!
Regards,
Carl

Sounds odd. 300 Requests is by far too much. As it was a C/S application: did they do anything else except the recompile on 10g? Moving from C/S to 10g webforms seems to be easy as you just need to recompile but in fact it isn't. There are many things which didn't matter in a C/S environment but have disastrous effects once the form is deployed over the web. The synchronize built in for example. In C/S calls to synchronize wasn't that bad; But when you are using web deployed forms...each call to synchronize is a roundtrip. The usage of timers is also best kept on a low level in webforms for example.
A good starting point for the whole do's and dont's when moving forms to the web is the forms upgrade center:
http://www.oracle.com/technetwork/developer-tools/forms/index-095046.html
If you don't have the source code available that's unfortune; but if you want to know what's happening behind the scenes there is the possibility to trace a forms session:
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/tracing002.htm#i1035515
maybe this sheds some light upon what's going on.
cheers

Navigation between diagrams on a SharePoint process repository

Similar Messages

Maybe you are looking for