Navigation Buttons Work on and Off?

Anyone with any suggestions would be greatly appreciated as I am out of ideas. I am new to Flash CS4 so I may be doing something stupid. I created my assests on Photoshop CS4 and imported them into flash as flash layers. I followed a training video by Paul Trani about creating a first website. I have several pages in my site, home, about, contact, photos etc. I created navigation buttons for the homepage and they work great. However on my other pages I created different buttons as they are in a different place and have some additional buttons that the homepage does not have (except the contact page has common buttons to the homepage). I put the homepage and second page (contact) actions on frame 1. I then created a new keyframe at frame 20 where the rest of the pages uses common buttons. I then changed the language in the action script so as not to conflict with the frame 1 action script. I had trouble making the second group of buttons work so I created a new actions layer (actions2) and they work, except...
Well my homepage buttons work, all of them. I can even go to my contact page (which share the same buttons with the homepage) and then go back to the home page. I can also go from the homepage to the other pages and those buttons work...UNTIL I go back to the home page or to the contacts page (the pages that share buttons) then those buttons NO LONGER WORK??? It seems like once I committ myself to one group of pages (I consider myself having two groups of pages based on the sharing of buttons by each group) it disables the other group.
Any ideas or direction I may look at?
Thanks, Mark

Hello and thank you for the response. If I may bother you for a bit more detail...for the later, would I put all the code in actions/frame 1? Then are the layers where the buttons artwork and the buttons themselves expanded out to the full length, then I make portions invisible? Also am having trouble where to find the invisibilty command...I remember seeing it somewhere but can't find it.
Again, any addional help would be great. I feel like I am almost there.
Mark

Similar Messages

TS3274 the sound is not working on my ipad, it stops working on and off, will work with ear phones and then it will stop working

the sound on my ipad is not working. It will work on and off and then cut out all together. Sometimes if I use the ear phones it will work for a while and then it will cut out all together

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

TS4002 My I mail is only working on and off.

My I mail is only working on and off please help me !

I'm assuming Gmail is setup as IMAP.
Remove your Gmail account then add it back. Apple account setup will automatically enter the correct settings.
Be sure the All Mail folder is set to sync. See this link for help with settings in your browser.
Use Gmail with Mavericks Mail

The light on the start button flashes on and off.

Hi
My Power Mac will not boot up.However the light on the start button flahes on and off.
At first I thought the disc was dead-but now I am not so sure...
Any suggestions anyone?
What does the flashing light mean?
thanks

Hello,
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547

TS2755 since i updated my iphone4 to 5.1.1 my mic works on and off.

my iphone 4 mic works on and off since i updated to 5.1.1

Hello gunn95,
The following article provides steps that can help get your iPhone to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

HT1218 Hi, I cant turn on Wi-Fi on my iphone4s? Wi-Fi button is grey and off permanently?

Hi,
I cant turn on Wi-Fi on my iphone 4s? Wi-Fi button is grey and off permanently?

This is an iPhone issue.
Please post in the iPhone support area for further assistance.
Using iPhone
If you have another question about an AirPort Express, AirPort Extreme or Time Capsule, we can likely help.

Imessage works on and off after ios 7 upgrade, why?

After I upgraded my iphone 4 to IOS 7, my imessage works on and off. Very aggravating and want to fix it!!

Wish that were more clear @ apple ... 4 hours this morning on this...........
Thanks!

When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.

I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

None of my Ipad external buttons work cannot turn off or restart

None of my Ipad external buttons work and I can not power down to reset any suggestions?

Try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons

AirPort Base working on and off on Windows machines?

So I have an AirPort base I got not even a year ago. It's been working fine until all of a sudden the other day, everything was disconnected, and set up in a different room. Now, the service is coming and going on my room mates computers, which are windows based. Everything else, my iMac/phone/pad Xbox, all have worked fine during this same time.
Why would the service come and go on their computers? The connection is there, it just won't let them use the internet, or if it does its DL speed is like .5. Then all of a sudden it will work again, and go away later.
Any ideas?

Not sure how you ended up here...
Maybe if you post your question in the PowerBook G4 discussion area a PowerBook user could offer advice.

I have no sound when I go to my setting and try to pick an text alert? Also my volume buttons I mash them and it shows the bell but no bars bellow it.but when I get a text it works on and off?

After I up dated my phone my volume wouldn't work when I went into my settings to choose an alert. When I got a text message it would work some times and sometimes it would cut off half way and sometimes it would just vibrate. Also my up and down buttons on the. Side of the phone wouldn't work right either the bell would come up but no bars bellow it worked?

the sound works with music player and everything but just not when it rings or a message comes in
Yes! I have the same issue on iPhone 5 !!! Also need help. I tried to reset and restore from backup, nothing helps.

My ipod 4g external speaker has been working on and off for the past few days since christmas. 2 days ago it was working all morning then in the afternoon in the middle of watching a video it just stopped. it hasnt worked since ): any help?

My ipod touch was given to me from apple refurbished and still with ios 5.0.2 after owering it on for the first time and updating to 6.0.1 it was functioning normally and i was using it just fine. i had just begun to use itunes and i bought some music and after playing about 3 or 4 songs aloud from the external speaker it stopped working. just like that. i looked over the internet about other incidents like that but then after thaty i returned back to my ipod and began playing Tron and the sound worked fine! i exited the app and it played my music just fine too. then the next day it went out again and no sound was being played. i left it alone and after about 2 or 3 hours i came back to it and it played sound again. the next day it went out in the middle of watching a video i had just taken. it hasnt come back on since. any help/suggestions?? anything plz..

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself

How do I make navigation buttons work?

I'm new to DW CS3...I've (somehow) managed to create a
navigation bar...what I can't figure out is how to make the back
and forward buttons to work. I'm using a template for my site
design. I'd like to set the actions on the template.
Thanks,
Michele

You wrote, "start and stop apache with apachectl start or apachectl stop (or restart with apachectl graceful)."
Are you saying that it's wrong to use System Preferences > Web Sharing to stop Apache - I should use the apachectl command instead?
"without blasting anything, you can specify the right one with an alias in your .bashrc file. do something like: alias apachectl="/usr/local/sbin/apachectl""
I'm searching for .bashrc with Spotlight right now, but I haven't found it yet; there was one reference to it, but I haven't yet been able to open it. Should there be a second .bashrc file for MAMP, or just a total of one?
"type "which apachectl" to determine which you're using by default. the default apache executable (1.3.x) is actually /usr/sbin/httpd. apachectl is just a wrapper script to control it."
I typed "which apachectl" into Terminal, and it displayed the following:
/usr/sbin/apachectl
What does that mean?
"so if mamp installed another apache instance, it probably ha its own conf file. edit that, and you should be set."
I'm sorry; edit what? Am I supposed to look for a reference to usr/sbin or apachectl in my httpd.conf file? I've already added virtual hosts to MAMP's httpd.conf file.
Thanks.

HT2178 external speakers suddenly working on and off

After getting a new hard drive installed, I have the problem with my nio 2/4 sound card which looses sound completely (however power light button is still on).
This problem comes and goes but I need this to be fixed as I make live music and this will be embarrasing if the sound goes off during my set. Can anyone please help?

A 500 GB hard drive may (?) use more power than the original drive, and perhaps cause an issue with power available on the USB bus. That does not mean all 500GB hard drives would have this problem. A higher perforrmance drive (such as 7200 RPM versus 5400 PRM) needs more power. It's also possible that the new drive generates more heat, and the heat may be causing the issue.
But it could also be coincidental that this problem developed at the same time as the hard drive swap. The only way to test is to put the original drive back (if it's not faulty and you still have it) to see if the problem recurs. It may not be helpful to replace the drive with another of the same type, because the drive is probably not faulty (it may just require more power than your MacBook's original drive). You can also choose a drive that is known to be more power efficient, versus higher performance.
A possible work-around, if the cause is power on the USB bus, is to get a powered USB hub, for example
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
If you connect this to one of your MacBook's USB ports and then connect your devices to the hub, the hub would supply the power to the devices, relieving the MacBook's USB bus. There are many products of this type, but you need to make sure it is powered (has it's own power supply). Less expensive USB hubs draw power from the USB port, which would defeat the purpose.

IPod Touch 4g internet conection works on and off

I got my new touch just a while ago after my classic died, it worked great. Then out of the blue the internet performes horribly. 99% of the time now I get the error that I cant connect to the itunes store or appstore when I open it. If I can get it to open and download something; it fails instantly saying cannot connect. In safari the internet is meh, sometimes it wont open certain pages but does a lot better than the apple store. My email works fine. When Im one facebook however if I try to view lots of images after the first few it will say no internet connection, my newsfeed seems to work okay though. My other apps that use internet are also kind of glitchy but some work fine while others dont work at all. I have no idea what is wrong. I tried a restore and the ios upgrade and a bunch of other stuff. It is not jailbroken if you are wondering. I am also having more app crashes now and i have light leakage in the right bottom corner. Anybody know whats going on?

I would start with a simple reboot of your router. Just unplug from its power source for 30 seconds or so. When it has completely restarted, try things again.
If you are having app crashes then you need to either reset or restore your touch. I would start with reset (you can do this while your router is rebooting) by holding down the Sleep/Wake and Home buttons together for about 10 seconds until you see the Apple logo. Let go at that point. If you still have problems, do a full restore via iTunes.

Navigation Buttons Work on and Off?

Similar Messages

Maybe you are looking for