Navigation Link failes : _layouts/15/AreaNavigationSettings.aspx fails to load on subsites

PROBLEM: The navigation link in Site Settings will only works on the root site. Any sub site I get the notorious "Sorry, something went wrong An unexpected error has occurred."
When I look at the logs I see the following that relate to the correlation ID below. Any ideas on how to get Navigation working?
This was caused when I migrated sites from one farm to another and only if I created a new site collection and replaced the root site with one from the other farm.
What I've Tried:
I've done this on other site collections where I moved the sites but made them subsites and did not overwrite the root site and the navigation feature works fine.  Even sites where I
didn't do a migration it worked great.
I've tried the following found at this link which seems to be the most popular solution but I've had no luck.
https://praveenix.wordpress.com/2014/03/16/sharepoint-2013-left-navigation-and-top-navigation-bar-does-not-render-links-and-shows-error-an-error-occurred-while-rendering-navigation-for-requested-url/
Anyone have any ideas on how to get Navigation working?
LOGS:
Application error when access /_layouts/15/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.GetInheritedNavigationCaption(StandardNavigationSettings settings)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.GetInheritedNavigationCaption(StandardNavigationSettings settings)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not
set to an instance of an object.     at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.GetInheritedNavigationCaption(StandardNavigationSettings settings)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
This also appear in the logs:
UserAgent not available, file operations may not be optimized.    at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb,
Boolean copyOnFirstWrite, Boolean disposeIlb)     at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult)     at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound)     at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath)     at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate)     at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.ApplyMasterPage()     at System.Web.UI.Page.PerformPreInit()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at
System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr
nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

Hi Craig,
I understand you encountered the issue with navigation link in the sites after migrated to another one.
The issue might be caused by
Navigation links that were added by site owners as relative links in the old site continued to work, and links that were added and managed automatically by SharePoint continued to work as well.
Please try the script in the article below and see if it fix the link:
http://sharepointtaproom.com/2014/11/12/how-to-fix-broken-navigation-links-after-sharepoint-upgrade-or-migration/
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)

How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)
active-passive SQL server cluster setup failed due to some steps missed in initial cluster setup,
now i have unistall sql instance from nodes,
Your help will higly appriciated.
Regards,
Anish
Asandeen

Hello,
Please refer to the following link about remove a node of SQL Server Failover Cluster Instance:
http://msdn.microsoft.com/en-us/library/ms191545.aspx#Remove
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Create Search Custom Navigation Link

Good day everyone.
I' am trying to add custom navigation link under main search box - like everything, people and others in search center site
After searching a little bit a have found that you need to create a custom page
For example this is a default page for Document Navigation
<%@ Page Inherits="Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" %> <%@ Reference VirtualPath="~TemplatePageUrl" %> <%@ Reference VirtualPath="~masterurl/custom.master" %><%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882"><head>

<title>share</title></head>
Are there some manuals how to create a custom pages like this?
Thanks in advance

You mean like this?
http://richardstk.com/2013/05/03/create-a-search-tab-in-sharepoint-2013/

WIN 7 : Not able to access(CreateFile failed) winusb device if inbox driver is loaded

Hello ALL,
CreateFile API is failed with ERROR_FILE_NOT_FOUND, when winusb comes with composite device.
Description:
i have two Custom winusb devices which supports MS-OS descriptor with the Microsoft DeviceInterfaceGUID ({b35924d6-3e16-4a9e-9782-5524a4b79bac}).
Two custom devices are,
1. USB Composite Device - (Winusb + CDC interface) - CreateFile API got Failed.
2. Winusb Device - CreateFile API got Passed.
So when i insert the composite device into machine, driver loaded automatically from online. But the CreateFile API got failed.
I gottah chance to analyze using WINOBJ tool.
https://technet.microsoft.com/en-us/sysinternals/bb896657
I could see that, when the inbox driver is loaded to the composite device,
Symbolic Link was not shown in
WINOBJ tool. Thats why CreateFile API was failed.
When the inbox driver is loaded to the Non Composite device, Symbolic Link showed in WINOBJ tool. Link was created automatically.
To fix this problem,
I created test signed winusb driver with specific HARDWARE id's, then i loaded that driver for the device, it started working.
Some More findings:
1. If i connect my device under Intel EHCI/xHCI controller with microsoft controller driver, above problem did not occur.
2. Problem only comes when the device is connected under Intel xHCI controller with intel controller driver.
3. Same problem in other link - http://www.osronline.com/showthread.cfm?link=233799
Could you please anyone help what could be the reason for symbolic link was not created if the winusb device comes with composite device?
Because i cannot go with test signed drivers.
Prasannna

> Problem only comes when the device is connected under Intel xHCI controller with intel controller driver.
Complain to Intel?

G460 and Windows 7 problems (Failed updates, LAN Adapter sometimes fails, etc...)

Hello everbody! I am having problems with Windows 7, well, I Have a original Windows 7 64-bit Retail CD copy and reinstalled on my G460 (The Original Windows OEM version comes with a lot of unecessary software and others stuffs =/), I've formatted and reinstalled, everything gone fine.
At the first initialization I've noticed LAN adapter was recognized, ok, I've set up IP address and configured Windows Update, it's been found 77 updates (optional updates included), but by default, only 67 updates selected, I let default updates selected and chose to download and install, but after that, only 10 or 13 updates was correctly installed, the others just failed! After reboot, the failed updates appeared to be reinstalled, ok, I chose to reinstall, but at this time, only 20 or 25 updates were correctly installed from the total failed updates, I thought to myself that some updates depends from another to be installed, ok, after three reboots, I've got all updates installed, well, at least that's what the system says, but when I look up at the Update History, I see many updates marked as FAILED, others are marked as sucefully installed, but the marjority are marked as failed! I don't know why it occurs, I've tried to install Windows 7 Service Pack 1 and it simply fails too. =/
Another problem too is the LAN Adapter, sometimes when Windows starts, the adapter doesn't work and when I check the Hardware manager, there is a yellow icon on the adapter and it says that the hardware couldn't initialize.
Anyone with the same problems?

Duck,
I am testing now after a clean Windows installation, before I update, I set to off the windows firewall and also lower my router's firewall, I also deselected the LAN Driver Updated, let's see if the problem occurs...
Hum, about the SP1, like you said, the video card (In my case, Intel HD Graphics) I've tried to download from Intel's site (Driver version: 15.21.10.64.2291): http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics&ProductLine=Laptop..., but when I try to install, it says that is not the correct driver for the video card, just at the Lenovo's site works correctly (Driver Version: 8.15.10.2104): http://consumersupport.lenovo.com/ot/en/driversdownloads/APR_Driver_List.aspx?CategoryID=880973&OS=W...
Anyone has experienced this problem?
Thanks!

Unable to pass the values from one report to another using navigation links

Hi All,
I am facing a strange issue where I have to pass a column value from one report to other.
I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
Can anyone advice where I was going wrong
Thank you,
AO

Hi,
The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
mark if helpful/correct.........
thanks,
prasanna

BI Report in Web UI - Cross Navigational Link

HI Gurus,
I made the neccessary customizing settings in CRMC_UI_NBLINKS to display my BI reports in the CRM Web-UI.
Now I want to use the 'Cross Navigational links for InfoObjects' to be able to navigate from a BI report to a CRM UI component.
I am using a report about activity partners (0BP_ACTIVIT/0BPARTNER).
My settings in CRMC_UI_NBLINKS for this report:
InfoObject: 0BP_ACTIVIT
Navigational Link ID: Z_XXX
Seq.: 1
Object Type: BP_ACCOUNT
Object Action: B Display
Text: BP Link
However in the context menu on the report I do not see any 'BP link'. I tried 3.x and 7.x web templates and 3.x and 7.x queries, no luck.
What am I missing?
Regards,
Michael

Hi,
We are facing the same problem.
Can you tell us how you solved it, if you did.
Thank you,
A.Morais & I.Llopis

Add the Z report to the Navigation Link

We are working on the SAP CRM 4.0 with Web client as a interaction center.
As per our requirement we need to add custom report to the navigation link.When the user clicks on this link the report should appear in Web client.
At present i am trying with SAP provided display customer functionality.That link is fetching me SAP Netweaver website instead of CRM BP transaction.
Pls advise as how i can i achieve this.
Thanks.

Hi -
Changes to be done in Z_QUINNOX_PAYMENT_SUMMARY
methods:
1. GET_ACTION_DEFINITION
class cl_crm_ic_abox_constants definition load.
concatenate cl_crm_ic_abox_constants=>bor_action
              'REPORT' "#EC NO_TEXT
              'EXECUTE' "#EC NO_TEXT
              'CRMSYS' "#EC NO_TEXT
         into rv_result.
2. CLASS_CONSTRUCTOR
class cl_crm_ic_abox_constants definition load.
gv_atype =
    cl_crm_ic_abox_constants=>bor_action.
gv_method =
    'EXECUTE'. "#EC NOTEXT
gv_bortype =
    'REPORT'. "#EC NOTEXT
gv_mappedlogsys =
   'CRMSYS'. " 'R3SYS46C'. "#EC NOTEXT
gv_version =
    '2.0'. "#EC NOTEXT
Is return data flow requested?
gv_is_return_df_requested =
    'X'. "#EC NOTEXT
similarly set the BOR obj name et all in the CONSTRUCTOR also....check the class 'CL_CRM_IC_ABOXSAMPLE_CREATESO' and make the changes accordingly.....you can ignore the t.code parameters which they have passed, jus add the relavant BOR obj details and the log sys details in the relavant places....
Now in ur BOR obj method 'EXECUTE', call the report using the SUBMIT prog stmt.....
This shd work.....
_Aarthi.

OBIEE Guided Navigation Link - How to open in New page.

Hi,
I am using Guided navigation links in OBIEE dashboards to link some of my reports.
When i click on the Link it opens the report on the same page. Instead i have to open the report in a new page. This Option is available in 'Link OR Image' section, not in 'Guided Nav. Link' section. Please suggest me if there is any way to achieve this.
Thanks
Swami

Hi
We have the same need: from within a report we have guided navigation to a detail report, that uses the values of the record in the master report as filterparameters. When clicking a row in the master report , we should open the detail report in a new window, while leaving the master report in the dashboard open. How can we achieve this?
Swami just mentioned the Link or Image object to indicate that this possibility of choosing the same or a new window is present there, and asked where to find the same choosing option for guided navigation.
Frits

How to Set Individual Managed Metadata Navigation Links to Open in New Window?

I am using a managed metadata term set for the global navigation in my client's site. Most of the global navigation links point to pages in the current site, and should open in the current browser window/tab as the end user is just navigating within the
site content. However, I have one particular node in the navigation term set that points to related content scattered around other external sites. The client wants these links to open a new window.
Unfortunately, I can't seem to set the target for navigation links in the term set. If I was using standard global navigation, I'd be able to select the "Open in new window" checkbox when setting up the link, but that option doesn't appear to be
supported via MMD navigation.
Any clever suggestions?
Thanks!

I had a similarish requirement at a client once upon a time, they wanted any links that went outside of the intranet web applications to open in a new window.
The way we managed that was to use jQuery to overwrite the standard hyperlink references for any hrefs that didn't point to internal sites to use the same javascript functions that SharePoint used for links configured to open in a new window. It worked out
as being about half a dozen lines; check the URL and if it doesn't begin with a set range of options then overwrite the on click behaviour using standard jQuery behaviour.
If you want it site wide then you just add jQuery and the code snippet to the master page, if you just want it in some places then add a CEWP or a HTML form web part to the relevant pages.

How to Open a Navigation Link in a new Window?

Hi guys,
I am trying to add a link to one of my team site. And i have activated the SharePoint server publishing infrastructure service. In the navigation link i am sure the clicked the check box open in new window. But i not getting the new window.
The link still open in the same tab. How to open it in new tab ?!!
I am using SharePoint 2013. I am using free trail pack.

Hi
one way is to code.
open the page using Deisgner, goto that hlink, and insert inside it target="_blank"
like
<a href="the_URL" taget="_blank">you text or a xslt tag</a>
Alose check this article
http://www.w3schools.com/HTML/html_links.asp
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Using variables as filters in analyses launched by Guided Navigation links

I'm trying to build a navigation link that will launch an analysis and have the filters in that analysis respect the values of either Presentation Variables or Session Variables. I'm having success with an ordinary column. I'm not having success with a number that I need to type into a prompt.
Here's what I've done so far:
1. Created a dashboard prompt based on the Month column. When a Month is selected, that selection populates the Request (Session) variable called Selected_Mo
2. Created an analysis with:
- a filter on the Month column: = Selected_Mo
- the Month column
- a column showing the value of Selected_Mo
3. Placed both of those onto a dashboard page. When I select a value of Month, the month in the analyis changes, and the column showing the value of Selected_Mo changes. So far, all is good.
4. Placed an Action Link on the dashboard. That action link launches the same analysis that I can see on the dashboard.
5. Clicked the action link. The value of Month that I selected on the dashboard is shown in the analysis.
Now, I'm trying to do the exact same thing with a numeric entry field in a dashboard prompt, and I'm running into a stumbling block. I want to type a number into a field in a dashboard prompt, and populate a session variable called Change_Pctg. Selecting "Variable Prompt" in the dashboard prompt only lets me populate a Presentation Variable. But no matter. I've created a "dummy" field like we used to do in 10g, just creating a Column Prompt against a column formula of 1.
When I put the analysis onto the dashboard, it's correct. I can enter a number into the dashboard prompt field, click Apply, and that value is shown in the analysis on the screen. I'm filtering against that value as well, and the number of rows is right. So I know that I'm setting the value of that Change_Pctg session variable.
But when I click the action link, only Selected_Mo is respected by the target analysis. The Change_Pctg session variable is ignored.
Any thoughts?

I'd like to abort this post. I've been able to replicate the error using a much simpler method. Refer to the post entitled 'Passing Presentation Variables to Guided Navigation'.

Install Failed: The following install step failed: run preflight script

I'm trying to reinstall Photoshop CS2 on an intel iMac, OS 10.5.5. I ran the install program, after a few seconds I get the following error message:   "Install Failed: The following install step failed: run preflight script for Adobe Photoshop CS2. Contact the software manufacturer for assistance." (I did contact adobe, but they no longer support CS2) Originally, I had installed PS CS2 when I was using OS 10.4.X, then I upgraded to 10.5.x. PS CS2 was working fine on my system. Then I accidentally deleted the program, now I'm having trouble reinstalling. I'd appreciate any help that you can give me.

I encountered the exact same problem - I had upgraded to CS2 from a previous version of Photoshop, back
when I was using OSX 10.3.9. Later, I upgraded my OS from 10.3.9, to Leopard (10.5.8.)
CS2 always ran flawlessly, through all those systems.
Then I had occasion to reformat my HD and reinstall Leopard 10.5.8.
That's when the CS2 installer failed, with the same message mentioned above.
When I called in, they basically said, buzz off....we won't help you.
First, this shows that their software is flawed.
They managed to allow this problem to occur due to inept programming.
Now they are either incapable, or unwilling, to write a programming fix for this problem.
It reeks olf ineptitude, plus colossal, inexcusable arrogance and disrespect for their customer base.
Just my humble opinion of course...and I've been a Photoshop user since 1990.

HT201210 tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!

HELP.
tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!

it just says restore failed error 3194 but i can't find anything useful on google or anything i can understand, i don't get technology at all.

Purchase Order Authorization through Navigation link

Hi
   I am having an requiremnet like these........
        1) 2 users entering purchase orders in diferent systems alternatively.
        2) After entering purchase order 1 user didnt allow to see other user purchase order through navigation link he can see other user purchase order
           (Note:if he navigate means only that particular users purchase orders only have to display)
        3)only manager user have to see all the users purchase order.
   Is there any Authorization will be there to acheive the above process.
Regards
Vinoth

Hi Vinoth..
Check with the data ownership authorizations.
https://help.sap.com/saphelp_sbo882/helpdata/en/45/05bc8224a70489e10000000a155369/content.htm
Regards
Kennedy

Navigation Link failes : _layouts/15/AreaNavigationSettings.aspx fails to load on subsites

Similar Messages

Maybe you are looking for