Navigation tabs top and left side
Hi
I've never built a site with tabs both across the top as well as the left side.
across the top is supposed to be the categories and within each category, I want to have the related navigation down the left side.
is each of the tabs going to end up being a page? if so, how do you make the pages cascade behind each other like file folder tabs?
or are the tabs going to become links to the various pages?
how would you set that structure up? I'm looking at the example of the Sushi Bar website in GoLive CS2 but thats not really what I want
any direction would be great
thanks
best, M/
>or are the tabs going to become links to the various pages?
Yes, that's likely going to be the way to go if the tabs are the primary navigation. If they were the secondary navigation, might be worth looking into the Spry tabs, or a similar JavaScript option:
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_unobtrusive.htm
http://labs.adobe.com/technologies/spry/home.html
Similar Messages
-
Cut off the top and left sides of iFrame?
I have a page I'd like to place as an iFrame in another page.
Is it possible to move the framed page up and to the left so
that the
frame cuts off the top and left sides of the framed page?Jim,
Thanks a TON! That worked well. It took me a bit longer to key it because the keyer didn't key out all of the color to black as well with the compound clip but I was able to make it happen. Video is up and I appreciate the help! -
Q5 screen cuts off at top and left side
I've had my Q5 for a week. Today I noticed the screen is cutting off on the top and the left side.
Does anyone have any idea how I can fix this?Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Dreamweaver page with flash - look at this - want top and left static
Dear Experts,
Thank for reading this.
http://maharishihoney.safire.com/
in the above page it is behaving just like wanted, EXCEPT want the top and left side to be 'pinned', meaning when resizing the browser window, the top does not disappear. I like that it resizes, and scales yet, keeps the whole viewport filled. Don't like that it can disappear at the top if the browser window isnt just right.
What do you think?
Any idea? Appreciate so much your thots.
Warmly with thanks,
Hopehave any other ideas how to accomplish above without flash?
Certainly - jQuery is a good alternative. To see an example, look here -
http://www.americanwatercolorsociety.org
ok, this is very good...
found this jquery plugin, for anyone reading this:
http://jquery.malsup.com/cycle/lite/
that does fade in and out something, even on click...
The rotation is jQuery.
But just because you use Flash for a cosmetic element (even an image rotation) doesn't mean that's the only thing that can be on the page, you know?
Yes, that is a good point..(-:
Thanks again for all your kind input.....
Warmly, Hope -
Flash page: need to 'pin' top and left perhaps too...see
Dear Experts,
Thank for reading this.
http://maharishihoney.safire.com/
in the above page it is behaving just like wanted, EXCEPT want the top and left side (perhaps) to be 'pinned', meaning when resizing the browser window, the top does not disappear. I like that it resizes, and scales, yet, keeps the whole viewport filled. Don't like that it can disappear at the top if the browser window isnt just right.
What do you think?
Any ideas? Appreciate so much your thots.
Warmly with thanks,
HopeOk, thanks again for reading...
additional note: Am using cs3 and so far using as2
To achieve as seen in above link: in dreamweaver set the w and h to 100% , plus setting the margin to 0 for height, width, top, bottom, plus set ' scale' to 'noscale.
Then have also tried (not in link above) setting the publish settings to 100% for w and h, the flash does not disappear at the top, but then there is alot of white all the way around at top and bottom even with above mentioned DW settings.
when not setting publish settings to 100% then we get what you see above in the link: it scales very nicely with no white and fills the screen the whole time, BUT it does disappear at the top.
Thanks again for all your attention....
Warmly, Hope
p.s.
2 samples of resizing in flash:
http://www.fidmdigitalarts.com/#/home
http://www.isurfbecause.com -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
Cross-Tab should expand right and left sides equally
Hi,
We are using Crystal Report XI release 2, Cross-Tab expands towards right side.
Our report parameter range is not constant.
When fewer columns we can get based on parameter, Cross-Tab does not look good because it prints left to right and we can see a lot space at right side of the page.
User asking put it in center, but it does not look good when we get more columns (it prints left to right).
We can achieve a good look, if it grows left and right sides equally.
How to achieve this please give me some suggestions.
Thanks and Regards,
Manjunath N, J JoginThough you can not make a CrossTab grow equally on right and left side but you can reduce the Gap at the end .
To achieve this,please Right Click on the cross --> Cross Tab Expert --> Customized Style tab and uncheck the checkbox Keep Columns Together
Also for the summary fields, make them left aligned by default CR aligns numeric fields to the right. do the same thing for Row/column headers. This way you'll save lot of space.
Hope this helps! -
How to create a new tab on the left side of bcc home page
Hi,
I am trying to create inventory tab at the left side of bcc navigation.
But I am facing these errors:
Caused by: javax.servlet.ServletException: javax.servlet.jsp.JspException: An error occurred while evaluating custom action attribute "value" with value "${ac
r occurred while getting property "activitySourceName" from an instance of class atg.bizui.activity.PortalActivitySource (java.util.MissingResourceException:
WebAppResources, locale en_US).
Please let me know how to resolve this.modify genericActivityDefinitionFiles attribute in /atg/commerce/web/CommerceActivitySource component to add your customized xml file. you can refer the following xml file:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE generic-activities
PUBLIC "-//Art Technology Group, Inc.//DTD General SQL Adapter//EN"
"http://www.atg.com/dtds/activitymanager/activitymanager_1.0.dtd">
<generic-activities>
<activity>
<id>RBImporter</id>
<resource-bundle>com.resources.WebAppResources</resource-bundle>
<display-name-resource>rbImporterDisplayName</display-name-resource>
<description-resource>rbImporterDescription</description-resource>
<destination-page>
<url>/publishing/RBImporter/RBImportManager.jsp?project=</url>
<clear-context>true</clear-context>
<acl>Profile$role$epubAdmin:read;Profile$role$epubSuperAdmin:read;Profile$role$GlobalMerchandiser:read;</acl>
</destination-page>
</activity>
</generic-activities> -
Gap in DW CS3 page (top and left)
i am still fairly new to dreamweaver but have learned a great
amount, but when i build a layout in layout mode it wont let my put
any tables, pictures, or generally anything else directly into the
top left corner. So when i preview the page with F12 there is a 5px
gap on the top and left of the page
Heres an image
http://i247.photobucket.com/albums/gg126/bigmack83/problem_1.jpg
any idea how to fix this?Use CSS to control all of your page element margins and
padding. In this
case, what you are describing is the default margin on the
<body> tags. Try
this CSS -
body { margin:0; padding:0; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bigmack83" <[email protected]> wrote in
message
news:fqj003$22m$[email protected]..
>i am still fairly new to dreamweaver but have learned a
great amount, but
>when
> i build a layout in layout mode it wont let my put any
tables, pictures,
> or
> generally anything else directly into the top left
corner. So when i
> preview
> the page with F12 there is a 5px gap on the top and left
of the page
>
> Heres an image
>
http://i247.photobucket.com/albums/gg126/bigmack83/problem_1.jpg
>
> any idea how to fix this?
> -
How do you unfreeze a frozen top and left command in the printing position command?
The top and left option of the printing position command is frozen at 0. The error message states that a value between 0.000 and 0.000 is required. How do I change this? This happens will unedited and edited pictures. I have just installed a xerox printer perhaps there is a link between this problem and the printer.
I didn't even suggest that because I would have thought that would be the first thing anyone would have checked for! If you flip the on/off switch on the bottom of the mouse do you have a blinking green light? Whether you do or don't, if you are unsure of the batteries then replace them.
-
Hello.
When im making bazilions of flash banners for my clients they want to see the html preview cause not all clients have standalone flash player installed to open swf in original scale. It wasnt problem in CS4 (and all other versions i have used so far), but in CC 2014 published html previews have no margins on top and on the left of the embedded swf - that makes previewing them troublesome when someone want to judge if border is subtle enough etc (banners are never snatched closely to the border of the screen in their natural habitat ). Manually changing all published html previews to add these margins is misunderstunding, especially when Adobe charge so much money for new versions that supposed to be better, and require less effort to produce stuff in them... Perfect solution would be to be able to publish banners center on the html preview file, but i can live with just these oldschool top and left margins with swf in top-left corner.
Is there a way to add to the default html preview file the margins back? I need them a lot. And im getting tired of Adobe making my life harder with each expensive version of their software im forced to buy due to no backward compatibility of fla files i have to work on with agencies.
Thanks in advance for any help.I think the default behavior is to show the flash movie with top-left alignment with no border within the HTML page, even in previous versions.
You could change that by selecting a different template for publishing,.
Open Publish Settings dialog,
Click on HTML Wrapper,
Click on Template drop-down and try out with different templates. -
Upon Loading of page, Setting the Top and Left properties of a TextField
Hello again,
I would just like to ask for suggestions on how to successfully set the top and left properties of a Textfield as soon as the page is loaded.
Thru Giri's help, I was able to do this with the push of a button. What I would need to do right now is to set it as soon as the page is loaded.
Thanks!Hi Jim,
It is not clear what you are trying to do here. If you want to set the top and left properties of a component when the page is loaded all you have to do is set it at design time itself. If the properties need to be set the second time the page loads then the code can be used in the event handler which submits the page.
It would help if you could explain the use case for setting the properties of a component when the page is loaded.
Cheers
Giri -
Setting the Top and Left properties during runtime, depending on...
hi guys,
it's me again with the same question, but same scenario...
but probably with a bit clearer detail now...
actually, what i wanna do is that although i have set the top and left properties at design time, as soon as the page opens i wanna be able to do the following:
if ( userlevel == 1 ) {
textfield1.setStyle("top: 100...");
} else if ( userlevel == 2 ) {
textfield1.setStyle("top: 500...");
thanks for your time =)The style properties CAN be set in the prerender call. Unfortunately, the requirement is that the component (text field in your case) has to have an unset property in the Design->properties window. (Or in the actual jsp code, which should be identical).
My main issue with this is SJC2's handling of this in the visual window. If i want to have a lot of components that are designed before run-time but placed during run-time, they all are a mess on the screen. I wish there was another property (in the properties window) that would be a checkbox, like "Use static layout". I, probably like others, am using a layout panel (grid) that has several other components in there. I want to be able to move this set of components at run-time, but to do so, I need to unset the layout panel's style. This causes my inside components to shift to the top left of my page, making a mess in the design window.
If any SJC developers are out there, please help! It would be great to somehow mitigate the static/dynamic properties/display issue. (Like, i want to have buttons with dynamic names (for localization), but basically, i have to have a bunch of blank buttons/text on the screen for all my pages because of the static requirement. At least, MyEclipse and others will put the id value if the text/label value is blank.
Chris -
JScrollPane, I need scrol bars on top and left
Hi,
Is there an easy way to move the scrollbars in a scroll pane so that
they are on the top and left. Every thing I can find shows them on the right and bottom and nothing explans how to get them left and top.
I tried the setComponentOrientation but that does not seem to do
anything.
Thanks in advance,
PatThe JScrollPane was designed to have scroll bar on right and bottom.
You could add JScrollbar components on top and left of JScrollPane.
But you cannot add other no scroll bar component to right and bottom!
There are many ways to have scroll bar on top and left.
One way is, not use JScrollPane, write your own JPanel, and
has BorderLayout then put scroll bar on left and top.
The other way is create your own JScrollPane, change the default
layout manager use by JScrollPane, the ScrollPaneLayout.
Create your own Layout manager to have the behaviour you like.
Anyway, there are not esay way to just swap the scroll bar. -
My new iPhone have a dent and scratch on top and bottom sides. Is it possible to change the cover or replacement
No. Fixing requires replacing the phone. Cost will be US $269 at any Apple store.
Get yourself a case instead.
Maybe you are looking for
-
I am using Firefox 4.0 Beta 7 on both my Android as well as my laptop. I am trying to set up the sync feature and keep getting the error message on my Android saying that the username or password are invalid. I have tried uninstalling and reinstallin
-
hello. I had Lightroom 5 on my old Mac Pro. Worked great. The Mac PRo died. I bought a new Mac Pro and am trying to re-load Lightroom but it won't accept my Serial number. Please help. Thanks.
-
Nokia lukia 730 restards on its own
Hi, Ive had my Nokia Lumia 730 for a few weeks now and it is very unreliable causing me to be late for work on a number of occasions ... I set my alarm and it doesn't ring as my phone has rebooted all on its own with 70% battery :/ .. The other day i
-
FCPX importing canon t3i, FCPX doesn't recognize the structure?
I'm inserting my card from my new canon t3i, FCPX doesn't recognize the card?
-
Why is Premiere Elements putting a black border around my video?
I am getting by OK with editing my videos in Premiere Elements 3.0 (I know, the shame). However, when I have finished editing, I need to output to a specified frame size to fit a video screen on my web site. All videos that have been edited for me by