Navigation that works for a8-5500 and how to fix GPS signal

Found out that these navigation systems works fine with at 5500-f tablet:
Navigon.
Route 66.
Sygic.
iGO Primo.
If you now of others that works (TomTom, Navfree etc), please let us know
However, the A8 5500f and other tablets from lenovo seems to have a problem with the GPS fix. It takes forever to acuire a decent signal. There is a soloution to this problem:
A) Have WI-FI ON, if possible.
B) Launch the navigation, eg Route 66.
C) After some seconds, turn off WI-FI.
D): Ready!
This procedure will allow the navigation to download the assisted GFS. But it seems like the WI-FI, when ON, is making it difficult to reciewe a clear gps signal. If no WI-FI, it will take a minute or so to reciewe a clear GPS signal without A-GPS.
There is also a third solution. Download a app that is keeping GPS alive all the time. Like ActiveGPS - GPS booster or so. This will allow you to keep WI-FI ON all the time. How much batteri that will eat up, i dont know.

Hi,
When you stram from a bin file repeatedly, it will run first time but will lose lock because when it comes tothe beginning of the file, its time suddenly jumps and the receiver does not accept this. For example, lets say your bin file is from GPS time t1=0 to GPS time t2=30000s. When you loop back around the file, the time increases from 0 to 30000 and then jumps back to 0 and that is not acceptable by receiver. You will need a direct streaming from 5671.
I can put that up for you soon if you want.
Regards,
Sastry
Sastry Vadlamani
RF and Communications Software R&D
National Instruments

Similar Messages

How to show one prompt that works for both Graph and Table views?

Have an analysis with a graph and a table. The information in the table and graph are different so cannot use a pivot table w/graph.
Each view has a view prompt for Year and Month (tried both separately and also as one combined column ‘201001’) so user can easily change months.
Too much data to use the slider because it will not graph.
Page prompt does not allow user to switch dates easily.
Since this will be a link from a dashboard, do not think making this a dashboard from a dashboard would be good so not a dashboard prompt.
Saw something about Master Detail linking, but does not appear to work with graph prompts.
How would the analysis be configured to show one prompt that works for both the Table and the Graph?
One prompt would change both the table and the graph.

Master Detail Linking almost works.
Table view can show all the results without error.
Graph view needs to be limited or errs with "Exceeded configured maximum number of allowed input records."
Is there a way to set the initial Master Detail Linking value to the top sorted value?

Airport Express that works for I while and then quits

I have an airport express that I connect with an Ethernet wire to my wifi network base station to be able to extend the wifi to other areas of the house. It used to work perfectly and I had the green light on it for days and days on, in fact it never quit it could be on for weeks.
Now it works for a while, an hour or so, and then the light goes out completely (no orange light, just no light) and there is no longer any wifi communication. Is the Airport broken or could it have something to do with the originating wifi provider base station which is in fact hardwired to the the Express?

Now it works for a while, an hour or so, and then the light goes out completely (no orange light, just no light) and there is no longer any wifi communication.
Unfortunately, this is a sign that you are likely going to need to replace this Express.
Here is what I think is happening based on experience with these devices:
The internal components on the Express heat up significantly and after an hour or so, the heat build up is causing a weak electronic component to change in value, or heat expansion is causing a loss of an electrical connection at a tiny solder joint.
When the device cools down, it will work again for awhile, but the same pattern will likely repeat. Internal repairs on the Express are not really feasible since the labor costs will likely exceed the cost of a new Express.
If you are really handy with small electronic repairs and you have the time, you could carefully saw the case open along the center seam to open up the Express and take a look at connections and solder points. It 's unlikely that you will find something obvious, but might be worth a shot.

My Macbook pro is rejecting my Iphone 5 charger. When ever I plug it in it says that the usb is taking to much power, yet when i plug in a different Iphone 5 charger it works fine. I'm just wondering why this is happening and how to fix it?

My Macbook pro is rejecting my Iphone 5 charger. When ever I plug it in it says that the usb is taking to much power, yet when i plug in a different Iphone 5 charger it works fine. I'm just wondering why this is happening and how to fix it?

My Macbook pro is rejecting my Iphone 5 charger
Do you actually mean the white cable with a lightning plug on one end and a USB on other
If so that is not the charger ,that is the cable
The charger is the device that plugs into the mains socket
If so
cable may be faulty if less than 12 months old take it to Apple Store genius bar for checking

HT4527 I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do th

I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do this? I have done the library sharing thing but I am getting rid of my primary computer and am afraid I will lose the library.

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Ipad2 gives me ""accessory is not supported" message w/ VGA adapter that I used lots of times before. Now it's not working. Why? and how do I get it back to normal functioning?

Ipad2 gives me ""accessory is not supported" message w/ VGA adapter that I used lots of times before. Now it's not working. Why? and how do I get it back to normal functioning?
I used the (Apple branded) VGA adapter lots of times last year. Now I got back to one place I used it many times and it does not work. When I restart iPad with the adapter connected, I get the "accessory is not supported"message. But that same accessory WAS supported before.
This is very annoying as I planned a whole bunch of presentations starting this week to do with my iPad2 and that adapter.

I received the same error message, "Accessory Not Supported" from both the VGA and DV video adapters I purchased, both were boxed direct from Apple. However, to bypass this problem I simply clicked on Photos icon on iPad2 and flipped through photos until it displayed on my projector. I then exited the Photos app and my home screen displayed fine on the projection screen.
Some logic issue with the video adapters, but launching Apple Photo app initializes the video adapters then they work fine for mirroring after that.
Platform: iPad2
IOS: 5.1.1
Best regards!

Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

AIR give you classes to detect an on-line or off-line status, it's in
this way for the sake of flexibility for instance what happens if you
only what to sync data only on Saturdays at 2 am? If it were done
automatically that'll be a problem. And it isn't so complicated.
You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
it's an application that does everything you have in mind.
I don't understand your question abou file types.
An AIR app can communicate with almost every backend served tech
CF, .Net, PHP, RoR.
Sincerely,
Michael
El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
>
I have to say that I'm loving the picture! well cool!
>
Sorry but I don't quiet understand. I thought AIR did the updating
automatically? I didn't realise the developer had to program the
logic of how the updates take place? Is it a case in most AIR apps
that when online the app updates the server and once every intervel
(of however long) the local SQLite DB is synced to the more updated
server DB. Then when offline the developer has to sense that the app
is offline and store a log manually of the updates without any help
from AIR itself, and then update once it comes online again?
>
Can AIR link to anything more than a database on the server side
apart from webservices, for example .as files or any other file types?
>
What type of server is a Flex app stored on, is it a specific Adobe
server rather than a Java or .NET server?
>
Thank you so much for your last comment!
IrishAIRMax
>

HT1923 This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users. My iPhone 4 will now sync with iTunes both in its USB-connected mini dock and over Wi-Fi. It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process.

I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

I downloaded mountain lion on my laptop. Do I need to do the same on my Desktop and iPad or is the one download good for all 3, and how do I do that if it is?

I downloaded mountain lion on my laptop. Do I need to do the same on my Desktop and iPad or is the one download good for all 3, and how do I do that if it is?

If your desktop computer is one that supports Mountain Lion, you can either download it there or make a bootable jump drive with the installer on it -- assuming you haven't yet used the installer you downloaded to your laptop.
As for the iPad, it doesn't use the same OS as the Macs do; it uses iOS versions, so Mountain Lion won't work there.

Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur.

Just bought 2 Apple 6 plus phones. Cannot get my husbands email to connect. He works for the state and not sure if that is the problem or not. All his information is correct.

Just bought two new iPhone 6 plus phones. Cannot get the email to load on my husbands phone for his work. He works for the state and I don't know if that is the issue or not. Any suggestions?

Your husband should contact his IT department at work to find out if he is allowed to set up his work email on his personal device and if so, how to do it.

When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue?

When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue? i have to click on the green arrow button to continue.

Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Laptop curser and touch pad stopped working for my pesario cq61 how do i fix it?

laptop curser and touch pad stopped working for my pesario cq61 how do i fix it?

Hello jamdizzle,
Welcome to the HP Forums!
I understand the touch pad on your notebook has stopped working. I will help you out the best I can!
I do have a workaround that may work, if you wish to try it:
1. Go into Device Manager, then Mice and other pointing devices.
2. Right-click on the mouse driver, and select "Uninstall".
3. Restart the computer. This will force the computer to install a driver based on the detected hardware.
This should resolve the issue. If not, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Mario
I worked on behalf of HP.

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
Download Acrobat 7 and CS2 products
Gene

Navigation that works for a8-5500 and how to fix GPS signal

Similar Messages

Maybe you are looking for