Navigation to webpage was canceled when opening Microsoft Lync Server 2010 Control Panel

Ok, yes I know there are many threads with similar titles, but my problem is different in that it doesn't happen every time.
The first time I access the Control Panel I get the error:
"Navigation to the webpage was canceled
What you can try:
Refresh the Page"
Clicking Refresh the Page works, kind of.  It brings up the admin console, but I get the spinning lights, which eventually resolves to an error at the top of the page that reads: "An operation failed.  Network communication failed.  Verify
your connection and try again." 
Then if I click to other parts, things seem to be fine for the most part, I sometimes see the Network error, and often it is slow.
Port 443 is running through an HLB and this is setup exactly like my other Lync cluster, which doesn't have this issue.  Internal web services URL is lynccontent and points to HLB VIP.  Admin redirect is lyncadmin and points to HLB VIP.
Going to the /cscp page of each FE or of the pool from IE works every time, but lyncadmin seems to have the same issue (at least on FE1).
Any thoughts?

Hi,
Could you perform the followings:
Make sure there're no duplicate records in the DNS Servers
Flush your DNS Cache at the Server & Client
Refresh any DNS Cache at the HLB (if any)
When the error appears, right click on the console and provide a screenshot on this
If you suspect that FE1 is the culprit, had you tried turning it off and monitor the situation?
Thanks!
James Ooi MCITP Lync Server 2010 | Blog: http://jamesosw.wordpress.com | Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread

Similar Messages

  • Problems launching Microsoft Lync Server 2010 Control Panel

    Just finished setting a new Lync 2010 environment.  I was able to get passed some errors with the Archiving and Monitoring stores.  I ended up removing those server roles to get the setup completed.  Now, when I try launching the Microsoft
    Lync Server 2010 Control Panel I get the following error:
    Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly
    'System.ServiceModel, Version=3.0.0.0, Culture=neutral,
    PublicKeyToken=b77a5c561934e089'
    Description:
    An unhandled exception occurred during the execution of the current web
    request. Please review the stack trace for more information about the error and
    where it originated in the code.
    Exception Details:
    System.TypeLoadException: Could not load type
    'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel,
    Version=3.0.0.0, Culture=neutral,
    PublicKeyToken=b77a5c561934e089'.
    Source Error:
    An unhandled exception was generated during the execution of the current web request.  Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    If the Stack Trace is needed I will post, any help would be greatly appreciated in solving this error. 
    Thanks in advance,
    Hector

    Were you playing with .NET versions at all? 
    https://support.microsoft.com/kb/2015129?wa=wsignin1.0
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Lync Server 2010 Control Panel - "navigation to the webpage was canceled"

    Hi All,
    I just installed Lync Server 2010. The SQL 2008 is installed on a separate box and both servers are on Windows 2008 R2.
    However, when I try to start the "Lync Server 2010 Control Panel"  i get a blank page with the following message "Navigation to the webpage was canceled"
    The Installation had no errors and went well. But I did have one problem in the Topology Builder where is asked to create a File Share and asked for FQDN and File Share. I entered "Server1.domain.com" and File Share "Poolshare" but it did
    not like it and error with a red cross saying.. 
    "FQDN Server1.domain.com is already used in this topology"
    So in the end I just change it to "Server1" then published and ran the installation sucessfully and all services are started OK
    Any idea? could it be that the file share is not using FQDN?
    Thanks
    ECL

    I have reveiwed this topic but have not been able to fing my answer. I am getting the same result when attempting to connect to the Lync Control Panel and the webpage saying "navigation was canceled..". Here are the details, any assistance is greatly
    appreciated:
    I have an existing OCS 2007 R2 server setup in the domain. My domain is company.CORP. It is a Standard Edition server for IM and Presence only. There is an Edge server as well and I have PIC enabled. My sipinternaltls SRV record to the current SE Front End.
    All works great. There is a SIP.company.com record in the domain too. I am standing up LYNC 2010 environment on HyperV and ran topology builder twice because I had to fix a name. (I see in Mac's comment that I need to run step2 again. Why is that?)
    My Share is on the HyperV server that is hosting the Front End server but they are completely different servernames. My topology published successfully and create some data in the File Share and the Backend DB was created and populated with tables. The certificates
    were successfully applied and all services started right up. The latest version of Silverlight was installed and the server was rebooted. Still the darn White Page with 'Navigation to the webpage was canceled'.
    I am able to go into IIS and launch the Control Panel successfully by browsing on the "cscp" directory for the Lync Server Internal Web Site. I can also connect to the Control Panel by using the
    httpS://admin.company.com/cscp but I have to put  'cscp ' in the path. I cannot browse AD using the Control Panel to find my TestLyncUser1 account but I can find the account, and successfully enable
    the account, using the Lync Management Shell. The account was enables and was able to successfully login to the Lync FE server (manually, since the SRV record point to OCS).
    This is where I am stuck. Why won't it launch from the Programs File Tool and why do I have to designate the CSCP in the URL? I am Not sure why I couldn't browse AD successfully in the Control Panel yet I could with Powershell. I will begin troubleshooting
    that issue next. Could it be because my sip.company.com record points to a different OCS Pool? Or my SRV internaltls record points to the OCS Pool? Microsoft supports standing up the two environments side-by-side and migrating but maybe I am missing something.
    Any ideas anyone?
    I want to add that I will be having a FE Pool and have named and published my second FE but I have not installed it. The Pool VIP is created in DNS and only pointing to FE1 right now.

  • Adobe Presenter 9 navigation to webpage was canceled when click email hyperlink

    Windows 7, IE 10, Adobe Presenter 9
    I have an email hyperlink created in PPT/Presenter that works fine within PPT.  However, when I publish the course to My Documents and view the presentation, once I click the email hyperlink, it opens an email but opens an additional window..."Navigation to webpage canceled".  It reacts this same way when published to our LMS.  The user will need to close the extra window, which may cause confusion.  Our IT department has looked at my IE security settings and I have set my flash security settings to "allow" for My Documents folder.  I went back to a similar course I created a couple of years ago, but I do not receive this message when I click the hyperlink.  I was using an older version of Presenter at that time.
    Has anyone experienced this same issue and had a resolution?
    Madonna

    Hi,
    Could you perform the followings:
    Make sure there're no duplicate records in the DNS Servers
    Flush your DNS Cache at the Server & Client
    Refresh any DNS Cache at the HLB (if any)
    When the error appears, right click on the console and provide a screenshot on this
    If you suspect that FE1 is the culprit, had you tried turning it off and monitor the situation?
    Thanks!
    James Ooi MCITP Lync Server 2010 | Blog: http://jamesosw.wordpress.com | Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
    to other community members reading the thread

  • Microsoft Lync Server 2013 Control Panel "Navigation to the webpage was canceled"

    i'm facing this issue on the last 2 days.My Lync server 2013 was seted up a month ago and everything went fine on the installation.
    Lync server 2013 on Windows 2008R2 SP1.
    I could login to the Control Panel (using domain administrator credentials), create users (including myself) manage clients etc.
    i didn't login to Lync server for at least a week, beacause i didin't have any other user to add. When time came to add a new user to Lync, i got this error whenever i try to open Control Panel.
    i didn't change anything during this time, so i'm really confused by this.
    i've checked everything from the start and all seem to be in place.
    i also can't open the admin page from the local host as i get an error
    HTTP error 403.4 - Fobidden.
    i tried also to create new certificates for Lync server, but issue remains.
    Also, any solutions i've read for this problem doesn't work as everything is placed correct as other users suggest.
    Can anyone please help me further?
    Cheers,
    Elias

    Ok I had the same problem, I missconfigured the admin simple url in topology builder (TB) which I fixed.  Also the default certificate in the FE server did not have a SAN entry for the "admin" simple url (which was an error). 
    So I corrected the admin address in TB republised it, redid step two on the FE, reissued adn replaced the old cert.  The new cert had the corrected admin simple url.  Checked IIS on the server and made sure that the internal web server had the
    right certificate, restarted IIS.
    The default Lync control pannel still did not come up, I rebooted the server, the closest I got was being prompt for my credential which it did not accept.
    Finally control pannel came up with https://localhost/cscp but I got prompted becuase of a certificate missmatch:
    but it still worked!!! Very very wierd.  I have not changed CA servers.  I am interested about why this happened....
    [email protected]        BK
    Bob Krangle

  • MS14-055 security update for Microsoft Lync Server 2010

    hello
    after applying this security update do I need to Apply it to the back end database? or is that just when regular patches are applied?

    Hi totalnet32,
    From http://support.microsoft.com/kb/2493736, we know that
    "After you install the update for the Core Components server role on a Lync Server 2010 Enterprise Edition front end server, the updated SQL database files are dropped to the computer that has the Core Components server role installed.This
    also applies to a Lync Server 2010 Standard Edition server. To apply the database changes, run the following cmdlets:
    Install-CsDatabase -Update -ConfiguredDatabases -SqlServerFqdn <EEBE.Fqdn> -UseDefaultSqlPaths
    2982388
    (https://support.microsoft.com/kb/2982388/            )    
    MS14-055: Description of the security update for Microsoft Lync Server 2010 (Response Group Service): September 9, 2014
    2982385
    (https://support.microsoft.com/kb/2982385/            )    
    MS14-055: Description of the security update for Microsoft Lync Server 2010 (Security update for Standard/Enterprise edition Server): September 23, 2014
    There's no Core Components server role update, as far as my experience, the DB update is not required.
    And I suggest that reboot the Lync Servers once after the updates have been installed.
    Best regards,
    Eric

  • C:\Program Files\Microsoft Lync Server 2010\Deployment\ directory missing.

    Hi Guys,
    We were trying to “Install the Mobility Service and autodiscover Service” on lync 2010 frontend server, for which we have downloaded the “McxStandAlone.msi” and placed in
    “C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup” location.
    As per the document, to execute this we have to run the bootstrapper.exe from the lync powershell at the following location
    “C:\Program Files\Microsoft Lync Server 2010\Deployment\Bootstrapper.exe”
    But “Deployment folder and bootstrapper exe” are not present in mentioned location.  
    So is there any workaround for this ? 
    Thanks and Regards, 
    Ankit 

    Did you happen to install Lync on another drive? Maybe D:?
    Also try to run the Lync Deployment Tool and click "Install or Update Lync Server System" and rerun "Setup or Remove Lync Server Components". This should do the same thing as running the bootstrapper.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010

    Hi,
    We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
    We do not have any VCS in the setup.
    If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
    Regards,
    RN

    Hi,
    so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
    here is m config:
    vrf definition Mgmt-intf
    address-family ipv4
    exit-address-family
    address-family ipv6
    exit-address-family
    voice vrf Mgmt-intf
    voice service voip
    no ip address trusted authenticate
    address-hiding
    media disable-detailed-stats
    allow-connections sip to sip
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    sip
      bind control source-interface GigabitEthernet0
      bind media source-interface GigabitEthernet0
      listen-port non-secure  5066
    voice class codec 1
    codec preference 1 g711ulaw
    codec preference 2 g711alaw
    codec preference 3 g729r8
    voice class codec 2
    codec preference 1 ilbc
    codec preference 2 g722-64
    codec preference 3 g711alaw
    codec preference 4 g711ulaw
    interface GigabitEthernet0
    vrf forwarding Mgmt-intf
    ip address 172.16.1.164 255.255.255.0
    negotiation auto
    dial-peer voice 15 voip
    tone ringback alert-no-PI
    numbering-type unknown
    preference 1
    destination-pattern 4.
    rtp payload-type comfort-noise 13
    session protocol sipv2
    session target ipv4:172.16.2.207:5068
    session transport tcp
    voice-class codec 2
    dtmf-relay rtp-nte
    dial-peer voice 17 voip
    numbering-type unknown
    preference 1
    destination-pattern 7.
    rtp payload-type comfort-noise 13
    session protocol sipv2
    session target ipv4:172.16.1.32:5060
    session transport udp
    voice-class codec 2
    dtmf-relay rtp-nte
    gateway
    timer receive-rtp 1200
    sip-ua
    keepalive target ipv4:172.16.2.207:5068 tcp
    172.16.1.32 - Asterisk with a extensions on it.
    172.16.2.207 - Lync 2013 mediation server with other extension on it
    i can call from Asterisk extension via router and to Lync extension.
    i cannot call from Lync to Asterisk.
    TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
    strange. lync person seems to configured everything correctly
    any thoughts?

  • Navigation to the webpage was cancelled

    Hi All,
    I am getting error Navigation to the webpage was cancelled when i click on SRM Application.
    Bala

    Hi ,
    I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
    i.e. from HTTPS to HTTP .
    To resolve this issue you can you below options  :
    1. Change the IE setting which will allow the navigation from secure to non-secure environment.
    2. Use same protocol either HTTP or HTTPS (Basis  Team will help you in this )
    3. Use correct SSL certificate  (Basis  Team will help you in this)
    The First option is very easy , you just need to change the IE setting , Which is explained in
    sapnote 0001427561
    Regards,
    Piyush

  • Navigation to the webpage was cancelled  Error in Portal

    Hi All,
    I am getting error Navigation to the webpage was cancelled in SAP Portal when and select few of the
    application like SRM Application , Some external HTMl application.
    Bala

    Hi ,
    I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
    i.e. from HTTPS to HTTP .
    To resolve this issue you can you below options  :
    1. Change the IE setting which will allow the navigation from secure to non-secure environment.
    2. Use same protocol either HTTP or HTTPS (Basis  Team will help you in this )
    3. Use correct SSL certificate  (Basis  Team will help you in this)
    The First option is very easy , you just need to change the IE setting , Which is explained in
    sapnote 0001427561
    Regards,
    Piyush

  • Navigation to the webpage was canceled

    "Navigation to the webpage was canceled" I get this error when I try to login to System Monitoring/Administration
    We have newly configured solman. Can anyone please hint at what the error could be?
    Thanks
    Prasad

    The hosts file entry was not maintained!
    The problem is resolved now, thanks

  • Navigation to the webpage was cancelled Solution Manager 4

    Hi Experts,
    I am accessing Solution Manager, We have servers configured on it
    The problem I am getting is
    DSWP - When I click on any server it says NAVIGATION TO THE WEBPAGE WAS CANCELLED.
    RFC Connections and SLD Connecitions are fine
    Please let me know.
    Thanks & Regards,
    Vikram

    Hi Vikran,
    I think you are not using the correct FQDN, could you kindly fix it?
    Please look at note 654982, for the requirement of FQDN. After you have
    set it, please kindly restart the Solman system and make sure it is
    loaded correctly. (run report RSPFPAR to double check.)
    The FQDN mean (Full Qualified Doman Name), which is set in parameter of
    the instance profile icm/host_name_full
    -please make sure All PCs including solman server itself can ping the
    FQDN, and the port 8001 is not blocked
    - Then make sure the browser in client PC can be load the URL as per
    below. (set proxy, network ports, etc correctly, this you have to ask
    your network colleague)
    http://<FQDN>:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?
    for e.g. my test system
    http://mysapuni-kul.sap.com
    :8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • When opening microsoft word on mac it automatically opens a huge number of my word files and I have to wait for it to open them all then when i try to close them down it freezes and I 'force quit' and on reopening the same thing repeats

    When opening microsoft word on mac it automatically opens a huge number of my word files and I have to wait for it to open them all then when i try to close them down it freezes and I 'force quit' and on reopening the same thing repeatsI have to wait for it to open them all then when i try to close them down it freezes and I 'force quit' and on reopening the same thing repeats

    One thing to try/check - in System Preferences, General.  Check the box "Close windows..."

  • Microsoft Click to Run won't open Microsoft Word Starter 2010

    The error message says it cannot open Microsoft Word Starter 2010 to try again or to repair in Control Panel.  I have no idea how to repair it.  Any suggestions?
    I am running Windows 7 Home with an HP 2000 notebook pc.  64 bit Operating System.
    Thanks

    Thanks for the response - I'll keep a note of that forum for any future problems I may have.
    I've come up with my own workaround for the problem though.
    It seems that new documents I create on the Mac work just fine in Windows. So I simply created a blank document on the Mac, set up the document margins etc to match the edited document I was having trouble with and copied the entire contents over. Worked a treat. Must have been the way it was created in the first place.

Maybe you are looking for