Navigation with a target

Hi all masters,
I have a Question.....
I'm working with two frames  ( FR1 and FR2 )
with a tableView in FR1 I'm getting somethings events, (rowselect), and with the data of that row, i need show in the frame FR2 the content of it..
I try with, navigation->goto_page( xxx.htm ) but there's not a item like TARGET of a typical link...
how can I do that? or exist another method for that??...
Thanks a lot.

what you can do is, onrowselect capture the selected row and its value and then set a variable to say 'Y'
and in your layout use javascript
<% if var = 'Y' %>
<script>
window.open('ptwo.htm' , .... target="framid");
</script>
<% endif . %>

Similar Messages

  • Create Assembly fails in SQL Server 2012 SP1 if an assembly is built with Platform Target as AnyCPU

    Environment:
    Windows 2008 R2.
    SQL Server 2012 SP1 64 bit.
    I have a .NET assembly built using .NET Framework 4.0 with Platform Target set to AnyCPU and Unsafe options. The assembly has dependency on few other assemblies and has unmanaged code also. When I run CREATE ASSEMBLY for this assembly I get the following
    error message.
    Assembly '<assembly name>' could
    not be installed because existing policy would keep it
    from being used.
    However if I change the compile option to x64 instead of AnyCPU, I can successfully create the assembly. So my question : Does SQL Server 2012 64 bit requires assemblies that have Unmanaged code or makes calls to native libraries need to be built using x64
    bit option? AnyCPU should not be used?
    Thanks in Advance

    Hello,
    The default setting of a Visual Studio project is "Any CPU".SO on a 64 bit system this means the program will automatically run as a 64 bit application and on a 32 bit system it will automatically run as a 32 bit application. But if you have a dependency
    assembly which is either x86 or x64, technically your project is therefore not "Any CPU" compatible. 
    According to BOL: If the the assembly is 100% type safe which there is no dependencies on native code or COM objects and that there is no 'unsafe' code, it is possible to take the .NET executable
    that you run on your 32-bit machine and move it to the 64-bit system and have it run successfully.
    In your case, the issue may caused by the unsafe code and you should spcify the platform target to X64 to make is run on the 64 bit system.
    Reference:http://www.hanselman.com/blog/BackToBasics32bitAnd64bitConfusionAroundX86AndX64AndTheNETFrameworkAndCLR.aspx
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click here. 
    Fanny Liu
    TechNet Community Support

  • Navigation with rollovers

    Hi,
    I have the nice task to evalute the Portal of the 9iAS v2.
    We have a nice web which should be ported to the Portal.
    I have there a nice Navigation Bar with rollovers.
    How can I build this navigation? I can use "Page Links" from the items to build a navigation with links.
    But I want to use images.
    My questions:
    1. Are there any build in features to do images with links - rollovers with links
    and if not - how can I do this.
    2. when I use Page Links I can find the right page just by name - how can I do this when
    I have to enter this manually?
    thanks a lot,
    michael

    Here's the bad news - letting a graphics application write the HTML for a production site is not a viable method.  The tables produced are completely rigid and will break unexpectedly as you build your page and add content (thereby changing the 'shape' of the original layout plan).  Please read this to see why that's the case -
    http://www.apptools.com/rants/spans.php
    The spans are what create "gaps" unexpectedly as the table tries to maintain its shape.  I believe the only way to fix this is to not use that FW HTML at all.

  • Best approach -Tabs based ADF Tree left side navigation with Dynamic Regions with out UI Shell

    Hi,
    Somebody can help for the best approach to implement the following requirement.
    Req: When the user select the ADF Tree left side navigation menu, each menu will open as multiple tabs(Dynamic Tabs) in right side content area with out UI Shell Template.
    I completed the
    Step-1: From the Model project, I can able to render ADF Tree in the using view and view links. I can get the adf tree which is having 3 menu items. Each menu item having 2 sub menu's.
    I took each menu item as one(1) taskflow, each taskflow will have two(2) fragments.
    Total I have 3 task flows as Menu Items and 6 fragments for sub menu's.
    Step-2:  My question is How do I implement Tab based the ADF tree navigation (left side area to dynamic regions in content area) through dynamic regions? Please provide the steps in view layers.

    Than ks for your response.
    This is working fine for ADF Tree navigation with dynamic regions if the taskflow having only one fragment. if the taskflow having more than one fragments, this will not work. The following conditions are always satisfies one page fragment of either "employees" or "departments" task flow.  If the "employees" task flow have 2 page fragments, it's not work even you pass parameters through routers.
    public TaskFlowId getDynamicTaskFlowId() {
    if (currentTaskFlowID == null ||
    currentTaskFlowID.equalsIgnoreCase(“employees”)) {
    return TaskFlowId.parse(employeetaskFlowId);
    if (currentTaskFlowID != null &&
    currentTaskFlowID.equalsIgnoreCase(“departments”)) {
    return TaskFlowId.parse(departmetaskFlowId);
    return TaskFlowId.parse(employeetaskFlowId);
    My question is "Same use case with Dynamic Tabs" when the user click on any adf tree node.

  • Using Spry Vertical Navigation with Templates-Need to indicate current page

    Using Spry Vertical Navigation with the Dreamweaver templates.  Using editable attributes etc., the current page mennu item does not seem to be changing.  How do you indicate the. current page.

    Persistent Page Indicator on Site Wide CSS Menus:
    http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • JTable's Cell navigation with TAB

    Dear ALL
    I have face one problem in JTable's cell navigation with TAB. The problem as describe bellow.
    I have two columns NAME and ADDRESS. Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS column. At the end of row controll comes on first row second column that means focus on ADDRESS column's first cell.
    Please give me some hints.
    Thanks in advance.
    Amit

    Your description doesn't make any sense (to me at least) so I don't know what your problem is or what you are asking to be changed.
    The normal tab order is Left to Right, Top to Bottom. So if the focus is at the top/left normal tabbing would be:
    Row 0, Column 0 (name 0)
    Row 0 Column 1 (address 0)
    Row 1, Column0 (name 1)
    Row 1, Column 1 (address 1)
    Row 2, Column 0 (name 2)
    Row 2, Column 1 (address 2)
    Your question seems to imply that your tab from address to addreass, which doesn't make sense.
    "Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS "

  • Need file to fiel scenarion with multiple target

    Need file to fiel scenarion with multiple target with screen shots
    Thanks & Regards
    Sateesh

    Hi,
    I could not understand your Qn.
    Nageswar.

  • Any Security Problems with Navigation with Short URLs?

    Hi ,
    I want to use Navigation with Short URLs for my users to access the portal. But if the users give that Short URLs to other non-users , will the URL open?
    I will give the role for the users only. Non-users will not have particular role.
    Are these Navigation with Short URLs are safe to use?
    Advise me.

    Hi,
    The iview have "EveryOne Role" and "Super Admin Role".
    The portal will not allow any "anonymous" users, because it needs atleast "EveryOne Role" for the access.
    Will this create any problem.
    I think the "EveryOne Role" is there for the user, if the iview1 assigned for role1 but still in the permissions of iview1 have the "Everyonerole" , it is allowing user to access this right?
    Then I need to remove the EveryOne Role from the permissions.
    Regards
    Kiran

  • Page navigation with SelectOneRadio

    Is it possible to do page navigation with just selectOneRadio choice and without link or command button?
    <h:form id="form1" styleClass="form">
                   <h:selectOneRadio disabledClass="selectOneRadio_Disabled"
                        enabledClass="selectOneRadio_Enabled" id="radio1"
                        styleClass="selectOneRadio" layout="pageDirection"
                        value="#{Main.selectedValue}"
                        valueChangeListener="#{Main.handleRadio1ValueChange}"
                        immediate="true" onclick="submit()">
                        <f:selectItem itemValue="page1" itemLabel="page1" />
                        <f:selectItem itemValue="page2" itemLabel="page2" />
                        <f:selectItem itemValue="page3" itemLabel="page3" />
                   </h:selectOneRadio>
                   <br>
              </h:form>
         public String handleRadio1ValueChange(ValueChangeEvent valueChangedEvent) {
              String s = (String)valueChangedEvent.getNewValue().toString();       
              return s;
    And faces-config:
    <navigation-rule>
              <from-view-id>/main.jsp</from-view-id>
              <navigation-case>
                   <from-action>#{Main.handleRadio1ValueChange}</from-action>
                   <from-outcome>page1</from-outcome>
                   <to-view-id>/page1.jsp</to-view-id>
              </navigation-case>
         </navigation-rule>

    I hope u figured out a solution for this post already. But, if not u can try this. It worked for me.
    In the change listener method, add these few lines for redirecting the control to required page.
    FacesContext facesContext = FacesContext.getCurrentInstance();
    ExternalContext externalContext = facesContext.getExternalContext();
    facesContext.responseComplete();
    HttpServletResponse response = (HttpServletResponse) externalContext.getResponse();
    try {
    response.sendRedirect("abc.jspx");
    } catch (Exception e) {
    e.printStackTrace();
    Regards, Hari.

  • Execute hidden filter with explicit target

    Hello,
    I would know if it is possible execute, in automation filter, an hidden filter with explicit target. I would apply a modified hidden filter on all image open in photoshop,
    at this moment I use PIUSelectByIndex to select an open document and after I execute hidden filter on selected image.
    How could I execute directly hidden filter on the image without use PIUSelectByIndex?
    I try something like:
    func()
        sPSActionReference->Make(&reference);
        sPSActionReference->PutIndex(reference,classDocument,1); //1,2,3... and so on
        sPSActionDescriptor->Make(&descriptor);
        sPSActionDescriptor->PutReference(descriptor,keyNull,reference);
        // This code is copied by Automation Filter example
        sPSActionDescriptor->PutEnumerated(descriptor,keyCommand,typeCommand,command);
        sPSActionControl->StringIDToTypeID(HiddenUniqueString,&hiddenEventID);
        sPSActionControl->Play(&result,hiddenEventID, descriptor, plugInDialogSilent);
    but it doesn't work, hidden is always applied on the active document.
    Thanks,
    Franco

    I am not sure that i understand what you are asking for.
    You could try to remember current layer in current document then sellect tha layer and documant that you need to work on, apply hidden filter and then return to current document or layer.
    If you can not work on Backgground layer maybe you have not selected it.
    truy something like:
    SPErr SelectBG(/*your parameters go here*/void)
             SPErr error = kSPNoError;
                   PIActionDescriptor result = NULL;
             PIActionDescriptor desc000006F8 = NULL;
                   PIActionReference ref00000198 = NULL;
             error = sPSActionDescriptor->Make(&desc000006F8);
             if (error) goto returnError;
        error = sPSActionReference->Make(&ref00000198);
        if (error) goto returnError;
        error = sPSActionReference->PutProperty(ref00000198, classLayer, keyBackground);
        if (error) goto returnError;
        error = sPSActionDescriptor->PutReference(desc000006F8, keyNull, ref00000198);
        if (error) goto returnError;
        error = sPSActionControl->Play(&result, eventSelect, desc000006F8, plugInDialogSilent);
        if (error) goto returnError;
    returnError:
         if (result != NULL) sPSActionDescriptor->Free(result);
         if (desc000006F8 != NULL) sPSActionDescriptor->Free(desc000006F8);
         if (ref00000198 != NULL) sPSActionReference->Free(ref00000198);
         return error;
    That should put focus on background layer and you should be able to work on it.
    Hope this helps.
    Regards,
    Momir

  • Horizontal Navigation with Dropdown Menu

    Hello!
    I am trying to put together a site with Horizontal navigation with items in the dropdown. I built my plan with main pages and child pages, and added my horizontal navigation on the Master page, but when I go to preview, I don't see any of my dropdown (child) pages. Is there any way to fix this? (I've attached a screenshot, hopefully this will help clarify)......

    Hello,
    Please click on the tiny white Arrow in the blue circle which comes up at the top right of the Menu. And there change the Menu type from Top Level pages to All pages.
    Note : Child pages on the same level in Plan view are listed vertically in a Horizontal Menu.
    Regards,
    Sachin

  • Cross Site collections navigation with publishing feature enabled into sharepoint 2010??

    Hi,
    Is it possible to cross site collection navigation in share point 2010 with publishing feature enabled? Right now we have a site collection with all the departmental sites within it. We are trying to create separate site collection with separate content
    database for each department for better management. But problem with Global navigation as OOB does not provide cross site collection navigation functionality, So looking for multiple site collections or navigation for more than one site collection under single
    umbrella. i was able to get the cross site collection navigation in my development env without publishing feature enabled using below link. But problem with production environment, as all the site collections and sites are publishing feature enabled. how i
    am gonna do cross site navigation with publishing feature enabled? 
    http://www.itsolutionbraindumps.com/2011/10/sharepoint-2010-cross-site-collection.html
    Any link or suggest will be greatly appreciated !

    Hi,
    According to your description, my understanding is that you want to create cross site collections navigation with publishing feature enabled in SharePoint 2010.
    Publishing sites (sites with publishing infrastructure) have their own navigation API, and it is much more complicated task to preserve cross-publishing sites navigation.
    We need to implement our own custom navigation provider.
    Please refer to the link below about the cross site collections navigation with publishing feature enabled:
    http://sadomovalex.blogspot.com/2010/12/cross-site-and-cross-site-collection.html
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error on page when navigating with in webdynpro applications

    Hi All,
    I have developed 5 different webdynpro applications. I need to navigate between these webdynpro applications. I am handling the navigation with in the webdynpro applications.
    The problem is after some time ( after navigating to the second or third level) when I try to click on the tabs(top level navigation), the JAVA SCRIPT ERROR is coming.
    And any other tabs are not coming.
    ERROR is: 'Error on page'
    ERROR Description is:'Problems with the web page might prevent it from being displayed properly or functioned properly'
    Any suggestions are appreciated.
    Thanks & Regards,
    Seshu

    Hi !,
    Please can you tell me what to do if you DO NOT want to destroy the source application when navigating away from it?
    For example...  Webdynpro App #1 calls Webdynpro App #2,
    Webdynpro App #1 will always stay visible and available to the user in there toolbar in the portal.  However after I click "Go" to trigger the navigation to Webdynpro App #2, then the next time I hit "Go", Webdynpro Application was destroyed out of memory I believe.

  • Refresh Navigation with Appintegrator iViews

    I'm currently working on migrating our existing intranet (using Lotus Notes as a content management system) into SAP portal. I'm planning to use appintegrator iviews to render the site content.
    My biggest challenge appears to be to figure out how to "refresh" the navigation to keep insyc with what's displayed in the iview. For example, let's say you are viewing a news article about an upcoming company event under "News" page (in the details navigation, "News" is hightlighted). There is a link within the news article to go to a particular document with more detailed information on the event under "Event" page. When you click on the link, the particular "event" article appears, but the navigation is still highlighting "News" area.
    I hope this makes sense to everyone. Does anyone have a brilliant idea how to solve this problem?

    Mina,
    Here is one way.
    If you want the navigation to "sync" when a link is clicked in one of your content pages:  Create an iView to contain the content you want to link to.  This creates a navigational node in the portal that you can then target.  (Attach this iView to an appropriate role so that it appears in the navigation.)
    From the page that you want to link to this page, change the href to the following:
    <A HREF="myLink"
      onclick="return EPCM.doNavigate
            ('ROLES://portal_content/myRole/myIView')">
    This is an HTML Link
    </A>
    For more info check out:  http://help.sap.com/saphelp_nw2004s/helpdata/en/43/0029d0e7371aa2e10000000a422035/content.htm
    Regards,
    Steph.

  • PDF Portfolio Navigator with horizontal tab layout

    Hello, Experts
             I am trying to create a PDF Portfolios with horizontal tab layout structure;
             several .NET libraries allowed me to create PDF files with thumbnail layout, but, in order to populate a horizontal tab
             layout, it seems, I would need to create a custom PDF navigator and import it into PDF Portfolio prior to inserting PDF file components ?
            preinstalled navigators look great, but I just need a simple horizontal tab view, where each tab only contains file's name and nothing else;
             buy clicking on each tab - corresponding file would be activated in the viewer
           is there any library of predesigned navigators that I can use ?
            is there any way to extract navigator from one and import it into another PDF portfolio ?
           would I need to use Flash or can this be done via .NET ?
    Best Regards,
    -Alex

    tried to install Portfolio SDK
    can't see the Navigator project wizard in Flex Builder  (  4.6 )
    The plugins have been extracted to:
    C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
    The NavigatorSupport folder has been extracted to:
    C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse and ( just in case ) to
    C:\Program Files\Adobe\Adobe Flash Builder 4.6\

Maybe you are looking for