Navigation with WebDynpros

Hello everyone,
I have just started to take a closer look at the WebDynpro technology. So far everything seems quite clear to me except for one thing.
How does a user open a WebDynpro? Is there something like SAP EasyAccess Menu? Or do I have to create a navigation window myself?
Any information on how this is done is appreciated.
Thanks in advance.
Regards,
Martin

Hi,
please check <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/464941db42f423e10000000a155106/frameset.htm">documentation</a>
basically you should create inbound and outbound plugs and link them in the window of your application.
in the coding you should fire the outbound navigation plug to do the actual navigation
grtz,
Koen

Similar Messages

Error on page when navigating with in webdynpro applications

Hi All,
I have developed 5 different webdynpro applications. I need to navigate between these webdynpro applications. I am handling the navigation with in the webdynpro applications.
The problem is after some time ( after navigating to the second or third level) when I try to click on the tabs(top level navigation), the JAVA SCRIPT ERROR is coming.
And any other tabs are not coming.
ERROR is: 'Error on page'
ERROR Description is:'Problems with the web page might prevent it from being displayed properly or functioned properly'
Any suggestions are appreciated.
Thanks & Regards,
Seshu

Hi !,
Please can you tell me what to do if you DO NOT want to destroy the source application when navigating away from it?
For example... Webdynpro App #1 calls Webdynpro App #2,
Webdynpro App #1 will always stay visible and available to the user in there toolbar in the portal. However after I click "Go" to trigger the navigation to Webdynpro App #2, then the next time I hit "Go", Webdynpro Application was destroyed out of memory I believe.

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Compatibility of an editor made in javascript with WebDynpro

Currently we are using a textarea for the content for the text of a chapter in an application. Of course end-users would like to have a rich text editor since the result is stored as PDF file, so since we use MVC and BSPs our first thought was to use the BTF editor but it seems that this editor is not planned to be replaced with an equivalent in WebDynpro.
So we have found a nice editor called FCKEditor (see http://www.fckeditor.net/) done in JavaScript but with java integration possibilities, it is under LGPL open source license.
So my question is, would it be compatible with WebDynpro ?

but they say that you can integrate it with java:
Installing FCKeditor in a JSP environment is quite easy:
Unzip the Java Integration Library in a directory named "FCKeditor".
Unzip the content of the FCKeditor release of your choice inside the "FCKeditor\web" folder.
Then you have to create in tomcat (or any servlet container) a new context named "FCKeditor" that points to the previously created "FCKeditor\web" folder.
Point your browser to http://domainName.ext/FCKeditor/_samples/index.jsp for the list of the samples.
Usage
Take a look at the test files and in the javadoc API provided in the distribution. Here is a simple example.
First put this taglib definition at the top of the JSP page:
<%@ taglib uri="http://fckeditor.net/tags-fckeditor" prefix="FCK" %>
Then the tag:
<FCK:editor
id="EditorAccessibility" //Unique name of the editor
 width="80%" //Width
 height="120" //Height
 toolbarSet="Accessibility" //Toolbar name
>This is another test. The "Second" row.</FCK:editor>
A more advance example, that show how to use the inner tags to overrides any of the settings specified in the config.js file:
<FCK:editor id="EditorDefault" basePath="/FCKeditor/"
 styleNames=";Style 1;Style 2; Style 3"
 fontNames=";Arial;Courier New;Times New Roman;Verdana" >
 This is some sample text.
</FCK:editor>
Building
Inside the files there is the source files for the tags (/src) and the ant build file (build.xml).
The ant build file provides the following tasks:
all: Clean build and dist directories, then compile
clean: Delete old build and dist directories
compile: Compile Java sources
dist: Create binary distribution
javadoc: Create Javadoc API documentation
release: Create Release Distribution
Plus some Tomcat managing tasks (to make this tasks work you need to copy inside the "web" folder the FCKeditor package):
install: Create a web application pointing to the build directory
reload: Recompile and reload the web application
remove: remove the web application
To start building the class you first need to modify the "catalina.home" property inside the build.xml, then type "ant dist" to compile, create the javadoc API description and generate the jar library to be copied in the WEB-INF.
Or more easily, type "ant install" after setting the right username and password for the tomcat manager application.

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
 I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
 I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'. "----
transaction type
lpszTransData = '1234567'. " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string. " <----
Value is not coming
write: lpszTransData1. " <----
Value is not coming

Charts creation with Webdynpro for Java

Hello everyone,
I am really new to SAP technologies and I have to create charts showing statistics for an application based on CE 7.1 and Webdynpro for Java.
I would like to have some inputs about the best way to achieve this, I saw it exists a business graphics UI and flash islands to use flex with webdynpro.
Thank you for your opinions
Regards,
Joh

Hi Johann,
Please refer to this link might help for your requirement:
[Click Here|http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproforJavaDemo+Kit]
Hope it helps
Regards
Arun

Flex with webdynpro for java using Flex Island

Hi Friends,
I am on Netweaver/SAP Enterprise Portal 7.0 SPstack12, I am developing UI for BI reports using VC, I am interested in developing UI using flex and want to integrate those apps with EP, I came to know flux Island supports flux with webdynpro java, basically I am a webdynpro for java developer, I want to develop flux applications with webdynpro for java in NWDS. And i want to know how to use Flex Island with webdynpro for java. So could u please post some useful links.
Thank in advance
Regards
samba

Hi
If you want to try out using ADOBE Flash Islands with WDJ, you would need to download SAP CE 7.1 EhP1 trial version, if not done so already.
The following link may help you in building the WDJ component with Flash Islands..
The specified item was not found.
If you donot want to develop the Flex project you can download the .swf file provided by the SAP mentors:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163
Thanks.
Chitrali

Java DC not deployed with WebDynPro DC

Hi,
I've been testing the DC functionality and I'm trying to create the following:
1) WebDynPro DC (DCA)
2) Java DC (DCB)
DCB has code for reading data from a database table (three classes, one is set as a public part). This code is functioning ok in another WebDynpro project where I've used it as an external jar file located in the lib directory and added to classpath.
DCA has a small table in the view that I'm filling (or trying to) with data from the database.
DCB has one java class as a Public Part. DCA has this PP defined in the Used DC's (DC Metadata --> DC definition --> Used DC's). I can see the DCB code fine from the DCA's view (I can use the methods from the class).
I see no code errors and everything compiles ok. I've built the DCA and DCB separately (Development Component --> Build) before doing the project build and deployment.
When I deploy, I'm getting java.lang.NoClassDefFoundError for the DCB class (User.class) when the program starts. So it seems that the DCB is not deployed with the DCA. I've tried to look at the properties and java classpath but nothing I've done has helped.
Purpose is set to compilation, and there is a
<at-build-time/>
tag in the .dcdef file.
Deployment of normal (no DC) Webdynpro projects works fine and the jars in the lib directory are deployed to the server OK.
Seems like I've tried everything but have found no solution yet. Refreshed every part, re-created everything, re-built, re-deployed etc...
Shortly: how to get DCB to deploy ?
Any help is appreciated here
Kind Regards,
Jari Pakarinen

Hi,
What is the Java DC for then ? If it cannot be used as a part of another DC (deployable unit) then how should it be used ? What is the use if it does not end up at the server with Webdynpro code ?
The scenario I'm looking for is to include Java classes in a Webdynpro project as a part of the project (not jars done somewhere else, I can do that already) deployed to the server with the Webdynpro.
Thank you for your help, I'm not blaming you or anything
Regards,
Jari

Adobe print forms - Intergration with Webdynpro ABAP

Hi
We are working on SAP Adobe print forms with Webdynpro ABAP. We are getting the PDF form's Hexadecimal content as a part of the FPFORMOUTPUT parameter when we execute the FM of the Form.
I tried to assign that to a context variable and assigned that to the PDFSource of the form and tried to generate the PDF. But is is showing a black page.
Can you please suggest a way if any to get this done.
Regards,
Srikanth.

You can use the print form directly. I mean the same way as you would use the WD/ online form. Provide the form name, the data source and stuff and the form should work. If that would be an interactive one, you would not be able to change any values if the form is based on DDIC dictionary, but since you want to use the printform, this is not your concern.
Regards Otto

Navigation with rollovers

Hi,
I have the nice task to evalute the Portal of the 9iAS v2.
We have a nice web which should be ported to the Portal.
I have there a nice Navigation Bar with rollovers.
How can I build this navigation? I can use "Page Links" from the items to build a navigation with links.
But I want to use images.
My questions:
1. Are there any build in features to do images with links - rollovers with links
and if not - how can I do this.
2. when I use Page Links I can find the right page just by name - how can I do this when
I have to enter this manually?
thanks a lot,
michael

Here's the bad news - letting a graphics application write the HTML for a production site is not a viable method. The tables produced are completely rigid and will break unexpectedly as you build your page and add content (thereby changing the 'shape' of the original layout plan). Please read this to see why that's the case -
http://www.apptools.com/rants/spans.php
The spans are what create "gaps" unexpectedly as the table tries to maintain its shape. I believe the only way to fix this is to not use that FW HTML at all.

How to Integrate HCM Process with Webdynpro ABAP Application

hi,
I have issue regarding how to integrate HCM Process with Webdynpro abap application.
I had created one HCM process for transfer using Hrasr_dt T code and also created form scenario and work flow.
How to Integrate HCM Process with Webdynpro ABAP Application
by
Parthasarathi

hi suhasini,
Thanks for your reply,
Can u explain in detail.. and Give any documents or links...
by
Parthasarathi

OCI with WebDynpro for ABAP in SRM 5.0

Hi there,
Can somebody tell me how the OCI interface has to be controlled in SRM 5.0 when free order forms are made with WebDynpro for Abap ?
Thanks.

You have posted your message to the wrong forum. This forum is for SRM eSourcing.

Data not visible in table o/p when compiled with webdynpro compiler

Hi,
I am using a Z BAPI to retrieve data from backend ECC6 server and show it using a VC application.
When I compile this VC application using FLASH(FLEX2), the data is shown in the table, whilst if the VC application is compiled using Webdynpro compiler, the data is not shown in the table.
The No. Of Rows parameter has been updated with 10.
Please suggest what can be done so that data is shown when compiled with Webdynpro compiler.
Regards,
Ranu

Hi Ranu,
WebDynpro Compiler only supports Webservices.
You can look at the below link to get into full details -
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/limitationsofWeb+Dynpro
Regards,
Vipin Vijayan.

Best approach -Tabs based ADF Tree left side navigation with Dynamic Regions with out UI Shell

Hi,
Somebody can help for the best approach to implement the following requirement.
Req: When the user select the ADF Tree left side navigation menu, each menu will open as multiple tabs(Dynamic Tabs) in right side content area with out UI Shell Template.
I completed the
Step-1: From the Model project, I can able to render ADF Tree in the using view and view links. I can get the adf tree which is having 3 menu items. Each menu item having 2 sub menu's.
I took each menu item as one(1) taskflow, each taskflow will have two(2) fragments.
Total I have 3 task flows as Menu Items and 6 fragments for sub menu's.
Step-2: My question is How do I implement Tab based the ADF tree navigation (left side area to dynamic regions in content area) through dynamic regions? Please provide the steps in view layers.

Than ks for your response.
This is working fine for ADF Tree navigation with dynamic regions if the taskflow having only one fragment. if the taskflow having more than one fragments, this will not work. The following conditions are always satisfies one page fragment of either "employees" or "departments" task flow. If the "employees" task flow have 2 page fragments, it's not work even you pass parameters through routers.
public TaskFlowId getDynamicTaskFlowId() {
if (currentTaskFlowID == null ||
currentTaskFlowID.equalsIgnoreCase(“employees”)) {
return TaskFlowId.parse(employeetaskFlowId);
if (currentTaskFlowID != null &&
currentTaskFlowID.equalsIgnoreCase(“departments”)) {
return TaskFlowId.parse(departmetaskFlowId);
return TaskFlowId.parse(employeetaskFlowId);
My question is "Same use case with Dynamic Tabs" when the user click on any adf tree node.

Using Spry Vertical Navigation with Templates-Need to indicate current page

Using Spry Vertical Navigation with the Dreamweaver templates. Using editable attributes etc., the current page mennu item does not seem to be changing. How do you indicate the. current page.

Persistent Page Indicator on Site Wide CSS Menus:
http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Navigation with WebDynpros

Similar Messages

Maybe you are looking for