Navigational att for reference infoobjects

we have the requirement for a new ods/cube in bw
where we need to have two characteristics
from_plant and to_plant.here , plant refers to the
standard sap plant 'werks'.we wish to have plant category,
plant org which are nav atts of 0plant as navigational
in bothe from_plant and to_plant . from_plant and to_plant
share the master data with 0plant .
i am not sure how to map the above reqt in a way that i have
plant org and plant category navigational capability for
both from_plant and to_plant .
i tried creating two reference infoobjects(from_plant , to_plant ) of 0plant
and enabling the plant org and plant category as navigational at both infoobject
and cube level .however , in the query i can only see the navigation
enabled for 0plant and not for any of the reference infoobjects .
pls guide me..

Hi,
Try the following.
1. Create from_plant and to_plant infoobject with 0PLANT as 'template'.
2. You will get all nav attributes of 0plant in these objects.
3. Load 0plant data to from_plant and to_plant infoobject individually.
It will solve the problem.
Regards,
Aditya

Similar Messages

Navigational attribute Vs normal infoobject in Query

Hi
I have some infoobjects named ..1)ITEM....2)STATUS....3)SALES etc in cubes...
I have to design a query showing this data...the report should show Item Status also...I can use normal infoobject STATUS from infocube in report to show Item Status....I have one more possibilitySTATUS is added as navigational attribute of infoobject ITEM..So I can use this navigational attribute also..which one should I use normal infoobject STATUS or navigational attribute STATUS of infoobject ITEM to show item status in report?how to decide on this?
Thanks for your guidance.

Hi Hayward,
Status as direct Object
When you use Status as an object added in cube you get the data of the day the cube was loaded. Let say for example your cube is loaded weekely on sundays, so the field status will give status as on sunday, even when it is run on other subsequent days of the week. So as correctly pointed in above posts values you get in status are not real time but historical.
Status as Navigational Attr of Item
When you use Status as Navigational attribute of Item then you get current data because in almost all cases Master Data Objects are loaded on daily basis and thus it picks the latetst Status of Items.
In case your cube is loaded daily then it won't make much difference that whether you are using it as a standalone object or as navigational attribute of Item.
Hope it helped
Regards
Raj Rai

Issue when using Navigation attributes for filtering in BEX

Hello,
We are encountering an issue when applying filter on Navigation attributes in BEx query built on top of a BW HANA Virtual Provider.
The interface is as below :
HANA Calculation View -> SAP BW 7.4 Virtual InfoCube -> Multiprovider -> BEx Query.
We have directly mapped the base Infoobject from HANA View to BW Virtual Provider and using this in BEx query free characteristics. We also have used the navigational attribute of this Infoobject in our Report variable screen as well as an Auth relevant object.
Eg if ZMATERIAL is the base infoobject and ZMATERIAL__ZXYZ navigational attribute is used in the report variable screen and as Authorization variable.
This is causing the query to fail.
The query also fails if I apply any filter values on any Navigational attribute with error message :
"Termination message sent ERROR DBMAN (305): Error reading the data of InfoProvider"
Using the navigational attribute with authorization variable fails with below :
"Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute ZMATERIAL__ZXYZ [...]"
Appreciate any inputs on this issue and how this can be fixed.
Thanks,
Tintu

Hi Andrey,
Thank you for your input.
Based on the OSS note , it says to import BW7.4 SP7. We are already on BW7.4 SP7
We get error "Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute
ZMATERIAL__ZXYZ" whenever we try to apply filters on any of the navigational attribute.
Thanks,
Tintu

Navigational Attribute for Keyfigure

Hi all,
Is it possible to make Key figure as a Navigational Attribute? I have a master data infoobject which has attributes under which one of them is a Key figure,, When i try to turn on the Navigational Attribute for that Keyfigure,, i am not able to see the Nav. Attr Switch to turn on,,
I even checked in the Keyfigure,, whether anything can be done,, i even un-checked Attribute only tab in that,,
Just wanted to know, is it possible to make it as Nav.Attr.
Ill assign points for sure,,
Thanks in Advance
Nisha

Hi Nisha,
You can't set Key figure as nav attribute.
Regards,
Praveen

What is the reference infoobject,how to data will be populated inthat objec

Hi All....
i don't no difference b/w primary infoobect and reference infoobject.
tell me how to dat will be populated b/w objects.
i have lot of confussion.
thanks,
pathi

Reference InfoObjects:
If an InfoObject has a reference InfoObject, it has its technical properties:
· For characteristics these are the data type and length as well as the master data (attributes, texts and hierarchies). The characteristic itself also has the operational semantics.
· For key figures these are the key figure type, data type and the definition of the currency and unit of measure. The referencing key figure can have another aggregation.
These properties can only be maintained with the reference InfoObject.
Several InfoObjects can use the same reference InfoObject. InfoObjects of this type automatically have the same technical properties and master data.
Plz chk out http://help.sap.com/saphelp_nw04/helpdata/en/80/1a637fe07211d2acb80000e829fbfe/frameset.htm for more info

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Item is not available for reference to Excise Invoice, Deselect Item OK!

Hai,
I am doing a Sub contracting scenario, in which the excise is applicable to main material, i have maintained condition records, captured excise But while doing GRN i am getting Item is not available for reference to Excise Invoice, Deselect Item OK!
Message no. 4F279
above errror
Plz solve my problem

Whether you tested case in development server ???
Are you sure SAP Note applies to our version & support package level ?

Can I have TWO Extractors for ONE InfoObject ???

Hi all,
We have two extractors (Business Content & Generic Extractor for 0WBS_ELEMT_ATTR). Can we have these TWO extractors for 0WBS_ELEMT InfoObject. If yes, can I have the procedure, PLEASE ?
Thanks.

Hi Venkat,
You can try to use Flexible update. For this you will need to make your InfoObject an InfoProvider. See here for an example:
http://help.sap.com/saphelp_nw04/helpdata/en/87/3fdf9587f211d5b2ff0050da4c74dc/content.htm
Hope this helps...

Create a Navigational Hierarchy for filtering with the Table API

Hello,
I've built a WAD report acourding to the how to document: "Create a Navigational Hierarchy for filtering with the Table API".
It works great but i dont know How to make the hirarchey to show the key and the text.
Please Advice.
David

Hi Kenneth,
please have a look in the source of the executed Web Application. What is inside of the <div> with the id filter?
You should also find a td tag with id hier_xyz with xyz the filter inside of the <div>-Tag with id filter.
Also check whether you have a javascript error.
Have a look on the Javascript function set_style. Perhaps you can paste it here, than I can have a look.
Heike

How do I create a small, for-reference-only version of my master library?

I have a 600GB Aperture 3 Managed library on my iMac's external hard drive. I use this as the master editing platform for my Aperture library and edits. I have no Referenced images. Everything is in the Managed library, mainly as RAW files.
I would love to have a smaller, portable but otherwise identical (structure/metadata etc) version of this Aperture library on my MacBook Pro, just for reference and for showing images to people. JPEGs would be fine, say at 1920 x 1200 pixels (or whatever is practical for my laptop's available disk space. The key thing is that the second (smaller) library would be in Aperture so that I have access to the same project structures I use on the main system, and can use Aperture's search and metadata capabilities to find images quickly.
I've spent some time looking but can't find a way of doing this. Can anyone offer any advice?

Here is what I am saying - you are not locked forever any such way. You can move your files back and forth at any time - managed to referenced - referenced to managed. You don't even have to go one way or the other - you can even select all of your files that are older than a certain date and under 3 stars - any criteria - make them referenced and automatically put them in folders by project. You can slice and dice managed/referenced any way you like by any search criteria and put them back again with search criteria and two functions relocate and consolidate. I do this all the time and have for years.
If you insist on not using the tools Aperture gives you to accomplish what you want you will probably be disappointed that there is not a menu item that exists for your exacting desire in the toolbar. If you learn how to put Aperture facilities together you can accomplish just about anything very quickly in a step or two - and then change your mind back.
I am just trying to show you that it is very limiting to thing about the ONE way you are going to use this tool. You tailor it for the here and now and then change it back.
RB
Ps. All this stuff is on my site as well in terms of the how to's.

Which is better verizon or att for cellular?

which is better verizon or att for cellular?

The 3/4G iPads are Verizon or ATT. You choose which one you want when you buy the iPad. It can't be changed.
 Cheers, Tom

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Link for reference operation set

Dear SAP Guru's
Can anyone provide me the link for Reference Operation Set in SAP Library?
Thanks in advance
Regards
Kalyan

Dear kalyan,
i think ur looking for Rework order, Reference operation set
Plz refer my reply from this Thread
[http://forumsa.sdn.sap.com/click.jspa?searchID=32188014&messageID=8172970]
Regards
kumar

Need Help making a navigation menu for a website

Alright so I've been having some problems getting this to work correctly. I am making a navigation menu for a website and I'm trying to get when I hover over the main header a drop down appears animated of course below it. I also want when you highlight a specific text line for it to highlight blue along with a rectangle behind it to change to a lighter shade of red.
Some of the problems I have been running into is play and stop commands on mouseover and them not stopping when they should and getting the text to change color.
Thanks for the help.
Here are some screen grabs of what I am doing
http://imgur.com/W2bZuF3
http://imgur.com/W2bZuF3
http://imgur.com/2GI3y71

Your page's code is still a bit of a wreck. Do you ever look at it?
<html>
<style type="text/css">#p7MBM_1 {
width: 951px;
You need a doctype first - I recommend HTML4.01 Transitional. Open this (and other pages) in DW and use FILE | Convert > HTML 4.01 Transitional, then save. But wait until you do the other changes recommended below before doing this.
Add a <head> tag below the <html> tag.
Add a <title> tag below the <head> tag.
Add this below the <title> tag - <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
Add </head> below this -
<style type="text/css">

</style>
You may want to change that font-family style to "Goudy Old Style, Geneva, Times, 'Times New Roman', serif", since Goudy is not web safe.
Move <body> below that </head> you just added.
That will clean your code up a bit. Let's look at the page again when you have done these.

Build Hierarchy with nodes with ABAP for custom Infoobject

Hi,
Need to build hierarchy with nodes with abap for custom infoobject.
Thanks

Hi,
Using information from:
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
you can bulid flat file with hierarchy data and then load in into BW...
Krzys

Navigational att for reference infoobjects

Similar Messages

Maybe you are looking for