Navigational attr in info-set.

Hi Expects,
I am using BW3.5
I want display attribute as navigation attribute, so that i can restrict some of the conditions in the query designer,
For this,
1) first i checked in the master data object whether it is navigation attribute or not, i found that it is a navigation attribute
2) Then in the ods i have swicted on i.e. the check box is checked, in the folder NavAttribute. and activated the ods.
3) In the info-set, the field is not available.
If i create report on ods, in report level the object is available, but if i create report on info-set the object is not available.
So to available the object in the report level by creating on info-set. i need to do any settings in info-set level if so please tell me step by step.
Thanks and regards,
Sagar.

Hi All,
Thanks to all to your time.
The issue was resouled, i have added master data object in the info-set.
Thanks and Regards,
Sagar.
Edited by: Sagar Venkata on Oct 20, 2008 3:50 PM

Similar Messages

Unable to use Navigational Attr in the query ?

Hi experts,
We are using BEx 3.X.
We have a report based on an infoset. We want to use some navigational attributes in the query and
restrict the values of these attributes.
But we are unable to use them as navigational attr. They are displayed as display attributes only.
We are unable to restrict them. This is because the query is on Infoset.
When i use the same navigational attr in a query based on a infocube, it is displaying as Navigational Attr.
We are in BI 7 but using BEx 3.X.
How to resolve this ?
Regards,
Nishuv.

Hi,
Master Data Read
A simple master data read should be done using generic BI functionality in the update rules. Choose the
option u201CMaster Data Attribute ofu201D in the update rule details for the selected characteristic and select an
attribute by using the F4 help. With this setting, the value of the characteristic to be updated is read from the
master data table of the specified characteristic.
Characteristic Material is provided by the InfoSource.
Characteristic Material Group is not provided by the InfoSource.
Characteristic Material Group is an attribute of characteristic Material
Therefore you can fill Material Group from the master data table of Material: Select the method Master Data
Attribute from and Material as source.
The generic master data read only works for characteristics that are available in the communication
structure.
For a more complex master data read or if the characteristic is not available in the communication structure,
you have to implement the master data read yourself in a routine for the specific characteristic. If so, the
function module RSAU_READ_MASTER_DATA should be used to read the master data.
In Infoset u can use max 2 cubes......and Infoobjects 'N' number u can use.......
Thanks/Tarak

Missing some values for Navigation attr

Hi All,
1.     We are using a Navigational attr for an MD Info object
2.     This Nav attr is used in Cube(Checked box - as Nav @ cube level)
3.     Problem is : I am able to see all Navigation attr values data , but randomly missing some values for this Nav attr.
u2022     What is the reason?
u2022     Please advise step wise..Any seetings I missed?
Thanks ,
LN

Cube neednot display all values of your navigational attributes.It displays only value for which it recieved the main infoobject.
eg :assume 0MATERIAL and nav attr say A.
Then only values for 0MATERIAL which is present in the cube the nav attribute will be displayed.
Hope this helps.

Info set , info provider and info spoke

Hi gurus plz give me the difference in between info set and info provider and info spoke. and give me what are the prerequisites are needed to process infoset, infoprovider and info spoke?
Regards
Vidhu

InfoProvider
An InfoProvider is an object for which queries can be created or executed in BEx
Check this for more,
http://help.sap.com/saphelp_nw04/helpdata/en/4d/c3cd3a9ac2cc6ce10000000a114084/content.htm
Infoset:
An InfoSet is a special view of a dataset, such as logical database, table join, table, and sequential file, and is used by SAP Query as a source data. InfoSets determine the tables or fields in these tables that can be referenced by a report. In most cases, InfoSets are based on logical databases.
SAP Query includes a component for maintaining InfoSets. When you create an InfoSet, a DataSource in an application system is selected.
Navigating in a BW to an InfoSet Query, using one or more ODS objects or InfoObjects.You can also drill-through to BEx queries and InfoSet Queries from a second BW system, that isConnected as a data mart.
The InfoSet Query functions allow you to report using flat data tables (master data reporting).Choose InfoObjects or ODS objects as data sources. These can be connected using joins.You define the data sources in an InfoSet. An InfoSet can contain data from one or more tables that are connected to one another by key fields.The data sources specified in the InfoSet form the basis of the InfoSet Query.
Check the link for more,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
InfoSpoke:
Info spoke is an open hub destination defines to which target the data is to be relayed.
Check this link for more,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
Check this doc also,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
Hope this gives you a good idea...

Error when activating the Info set

Hi all,
I have created an Infoset on 2 infocubes, in both of them i am having navigational attributes, but either in infoset backend or front end i am not getting the navigational attributes.
For getting these navigational attributes i added masterdata objects for which i need to get navigational attributes to the infoset and mapped them to the data target objects.
while the infoset is having only cubes the infoset worked fine expect nav attributes.when i added these masterdata objects to the infoset i am getting error while activating the info set.
It does not have any description even to find out the solution.
Please let me know the solution as soon as possible.
thanks in advance,

Hi Sarau,
I think Multiprovider ( Multi Cube ) is the best option than Infoset.......
with hopes
ARS

Navigational Attr. in Multiprovider?

Hi All
Has anyone encountered this doubt?
When you have multiprovider on two cubes,
where your navigational attr. is enabled,
whereas in Multiprovider the same navigation attr. object will be enabled or not automatically or need to enable manually?

Hi BI Leaner,
Usually the steps are likely below :
1. make sure nav att is ON by tick the checkbox in your two info cubes
2. make sure nav att is ON by tick the checkbox in your multiprovider
3. make sure indentify(assign) your nav att in your multiprovider
4. make sure u have activate the info cube and multiprovider to apply changes
5. close and re-open your query and see the nav att if already applied in separate info objects.
Hope it helps

SAP Query Alias Table in Info-set not working

Hi Guys,
I'm having a bit of trouble with a query I'm writing in SQ01.
I am trying to create a standard margin report between two different costing variants that we use.
n order to do so I have had to employ the use of alias tables.
I have named the alias tables KEKO_2 and KEPH_2 accordingly and joined them in the info set with the same joins as the original tables (Left Outer to MARC on MATNR and WERKS)
However, when I have come to test the query in SQ01 I get a runtime error which states the following:
The following syntax error was found in the program
AQA0MASTER_DATA=STANDARDMARGIN :
"Field "KEPH_2-KST001" is unknown. It is neither in one of the specified
tables nor defined by a "DATA" statement . . . . . . . . . ."
But it is in a specified table! My alias table.
How can I make this query work?
Any help would be appreciated.
Thanks in advance.

Hi,
This is SAP business one reporting and printing forum. Please find correct forum and repost your question to get quick assistance.
Please close this thread by marking helpful answer.
Thanks & Regards,
Nagarajan

Re: How to create Aggregates on a characteristic which has navigational attr?

HI,
we are unable to give the Fixed value for a Navigational Attr (Vendor A/c Group) irrespective of wheather PO (Mater char for Vendor A/e Group) in the aggregate.
Thanks much in advance .. will assign points if useful.. Waiting for replies.
Raju
Edited by: Gangaraju Eegu on Nov 27, 2008 4:42 PM

Hi Gangaraju
I just tried it out in our system and it works fine...
What excactly is your problem? Any messages?
Greets
TOM

How to create code for an additional field in an info set

Hello,
I have an info set in tra SQ02 and the area is HCM with version ERP2004.
I need to create an additional field to show "Work permit" in ad hoc queries. I know that the infotype 0016 has a standard field P0016-ARBER which contains a date if that person has a work permit. System should select the latest record or the one which is valid during reporting period.
The requirement for this new field is that it should just has X if the field P0016-ARBER contains a date (i.e. that person has a work permit). If the field P0016-ARBER is empty, then the new field "Work permit" is also empty. So, the date itself is not enough.
I am not an abaper. I have tried to create a code for my field but there is always problems with the code. I have tried without the lineinto but checker says I need to. I have tried different places for statement ENDSELECT but without success. How should I do this?
What I have so far is (TYOLUPA = Work permit) is shown below:
select SINGLE ARBER
into TYOLUPA
from PA0016
where pernr = P0016-pernr
and ENDDA = '31129999'.
clear TYOLUPA.
if ARBER ne ''.
then TYOLUPA = 'X'.
endif.
Thanks for your advice!
Regards,
Pipsa

pia,
In extras tab create column "workpermit" in infoset and add that column to Field groups.
Then under record processing event...
DATA : TYOLUPA like PA0016-ARBER.
Under Record processing event.
select SINGLE ARBER
into TYOLUPA
from PA0016
where pernr = P0016-pernr
and ENDDA = '31129999'.
if TYOLUPA ne ' '.
WORKPERMIT = 'X'.
endif.
Don't forget to reward if useful...

Re:User group,info set and Query combination table

Hi,
I would like to know the combination table of User group,info set and Query.
Can any body please respond to my question?
Regards,
Suresh Kumar.

Hi,
Check the tables starting with AQG*.
Reward points if useful.
Regards,
Atish

Info Set on Transactional ODS

Hi Friends,
My Requiement is to create a Info Set on Tannsactional ODS and On this info set i have to create a Bex Query.
If i creata a Query on this info set whether we can get all the query properties like currency conversion etc as for the query created on noramal info set which is created on standard ODS.
Looking for more suggessions and answers.
Thanks in advance.

Hi Ashok,
Thanks for the immediate replay.
Hear i have to do a lenthi process before doing that ,i an looking for some b'dy who has worked on currency conversions at query level whcih are developed on infosets(i.e on Transactional ODS).
Once again thanks for the usefull answer.
Laxman

Info set query

Hello everybody,
I have a problem with the creation of info set (tcode : sq00 and sq02)
I need your help, i have to develop a query with a number Purchase Order and number of invoice.
For example : for a number of invoice : 5105617263
i have with TOAD (soft) this :
select distinct ekko.ebeln, rseg.belnr
from sapsr3.ekko, sapsr3.rseg
where ekko.ebeln = rseg.ebeln
and rseg.belnr = '5105617263'
and ekko.mandt = '350'
EBELN BELNR
4500013374 5105617263
4500014267 5105617263
I've tried to have the same result with an info set (sq02) and i have this :
Purchase Order Invoice
4500013374 5105617263
4500013374 5105617263
4500013374 5105617263
4500014267 5105617263
4500014267 5105617263
4500014267 5105617263
4500014267 5105617263
I dont know to develop in ABAP and i want to know if it's possible to have DISTINCT in an info set ?
Or which table can i use to have this ?
Thank you very much

thanks for your answers.
 
I tried to create a z programm with tcode SE38 but i dont have the key.
 
I would like to know if i can write this code on the tcode sq02 ?
 
this is my code :
 
FUNCTION /1BCDWB/IQG000000000487EXTR. 
 
""Interface locale : 
*" TABLES 
*" %SELOPT STRUCTURE RSPARAMS 
*" %DTAB STRUCTURE /1BCDWB/IQG000000000487 
*" CHANGING 
*" VALUE(%RTMODE) TYPE AQLIMODE 
*" EXCEPTIONS 
*" NO_DATA 
*" NO_AUTHORIZATION 
*" ILLEGAL_PACKAGE 
*" CURSOR_NOT_OPEN 
 
 
call function 'RSAQRT_SET_IDENTIFICATION' 
exporting iqid = %iqid 
 sscr_report = sy-repid 
changing rtmode = %rtmode. 
 
if %rtmode-pack_on = space or %rtmode-first_call = 'X'. 
 call function 'RSAQRT_FILL_SELECTIONS' 
 tables selopt = %selopt 
 changing rtmode = %rtmode. 
endif. 
 
call function 'RSAQRT_INIT_TEXTHANDLING' 
 exporting class = 'CL_TEXT_IDENTIFIER' 
 wsid = 'G' 
 infoset = 'REQUETE_EBELN'. 
 
if %rtmode-no_authchk = space 
and ( %rtmode-pack_on = space or %rtmode-first_call = 'X' ). 
refresh %auth_tabs. 
append 'RBKP' to %auth_tabs. 
append 'EKBE' to %auth_tabs. 
append 'EKKO' to %auth_tabs. 
call function 'RSAQRT_AUTHORITY_CHECK' 
 exporting 
 auth_tabs = %auth_tabs 
 auth_clas = 'CL_QUERY_TAB_ACCESS_AUTHORITY' 
 changing 
 rtmode = %rtmode 
 exceptions 
 NO_AUTHORIZATION = 1. 
if sy-subrc = 1. 
 raise no_authorization. 
endif. 
endif. 
break-point. 
 
data: %l_no_further_fetch type flag, " stop fetching 
 %l_hits_cnt type i. " cnt for %dbtab entries 
 
 if %rtmode-pack_abort = 'X'. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 exit. 
endif. 
 
if %rtmode-pack_on = space or %rtmode-first_call = 'X'. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 open cursor with hold %dbcursor for 
 select RBKPBELNR RBKPRMWWR RBKPWAERS RBKPWMWST1 EKBEBELNR EKKOEBELN 
 from ( RBKP 
 inner join EKBE 
 on EKBEBELNR = RBKPBELNR 
 inner join EKKO 
 on EKKOEBELN = EKBEEBELN ) 
 where RBKP~BELNR in SP$00001 
 and EKKO~EBELN in SP$00002 . 
endif. 
 
if %dbcursor is initial. 
raise cursor_not_open. 
endif. 
 
while %l_no_further_fetch = space. 
 fetch next cursor %dbcursor 
 into (RBKP-BELNR , RBKP-RMWWR , RBKP-WAERS , RBKP-WMWST1 , EKBE-BELNR , EKKO-EBELN ). 
 if ( ( %rtmode-acc_check = 'X' and 
 sy-dbcnt > %rtmode-acc_number ) 
 or sy-subrc <> 0 ). 
 %l_no_further_fetch = 'X'. 
 else. 
 check SP$00001. 
 check SP$00002. 
 call function 'RSAQRT_TEXTFIELD_REFRESH'. 
 %dtab-BELNR = RBKP-BELNR . 
 %dtab-RMWWR = RBKP-RMWWR . 
 %dtab-WAERS = RBKP-WAERS . 
 %dtab-WMWST1 = RBKP-WMWST1 . 
 %dtab-WAERS001 = RBKP-WAERS . 
 %dtab-EBELN = EKKO-EBELN . 
 append %dtab. 
 %l_hits_cnt = %l_hits_cnt + 1. 
 if %rtmode-pack_on = 'X' 
 and %l_hits_cnt >= %rtmode-pack_size. 
 %l_no_further_fetch = 'X'. 
 endif. 
 endif. 
 endwhile. 
 
if %l_hits_cnt = 0. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 raise no_data. 
 endif. 
 
if %rtmode-pack_on <> 'X'. 
 close cursor %dbcursor. 
endif. 
read table %dtab index 1 transporting no fields. 
if sy-subrc ne 0. 
 raise no_data. 
endif. 
 
endfunction.
 
if i can write this code on the sq02, where i must write this ? DATA ? INITIALISATION ? START-OF-SELECTION ?
Thank u very much for your help !
Edited by: missmiss25 on Oct 23, 2009 10:09 AM

Info set query condition

we have a infoset query to generate a list of parked logistic invoices, we use the same vendor and the same T-code : MIR7 to generate park document, but I can see only the park documents generated by my collegue throgh this info set query.
I can't see the park documents generated by me throgh this info set query, we are using the same T-code MIR7 and same query.
why this happen? Is someone set the condition of this query, so i can't see the parked document generate by my self. I can see these parked document(both my collegue and mine) through MIR6

any idea from query design point of view? thanks

Re: Info set and query transport under same request number

Hi,
I would like to know the details about info set and query transport from development to quality using SAP Query: Trnasport tool.my quesion is,
Can i create all info sets and related queries under same request number or will it be created in diffrent request numbers?Please respond any body to my question.
Regards,
Suresh Kumar.

No it is possible as per SAP.
Please read follwoing help-
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
It is talking abou the Special Features of InfoCubes in InfoSets.
For queries based on an InfoSet with an InfoCube, the system decides at runtime whether aggregates can be used for the InfoCube. This is the case if all the required InfoObjects of the InfoCube exist in an aggregate. The following InfoObjects are required:
The key figures of the InfoCube selected in the query
The characteristics of the InfoCube selected in the query
The characteristics required for a join with other InfoProviders in the InfoSet.
Furthermore, as a prerequisite for using aggregates, all the data required by an InfoCube must be readable using logical access. For an InfoCube within an InfoSet with InfoCubes, it is no longer possible to read part of the data from one aggregate and part of the data from another aggregate or the InfoCube itself.

Custom fields of standard info types to be included in Info set query

Hi All,
I want to understand if the following scenario is entirely a fucntional config or ABAP efforts are also required.
A standard info type is already included in the Info set. But the (Z fields) in the Additional fields column of the IT are not visible in Info set for the respective info type.
I understand, with T-code SQ02 infotypes can be included in the existing info set, but not aware about the Z fields of a Standard Infotype.
Hence, please let me know, if there is any config which is required, so that they are reflected in Info set.
Thank you in Advance.
Regards
Simran

Make sure you have the infoset in edit mode.
if it is correct you see the addtional fields in the left half of the screen at the infotype.
Select the field group on the right half of the screen, go to the left half of the screen, select the field you want to add to the fieldgroup with right mouse click and select 'add field to fieldgroup'
good luck
Theo

Navigational attr in info-set.

Similar Messages

Maybe you are looking for