Navigational Attribute is not properly displaying

Hello,
We have a "Sales Group" navigational attribute YCUST_SAL-YSALE_GRP in a BW report. We have adjusted a sales group for a customer in R3 from F10 to E49 and hte same has been pulled to BW side,.
we have activated the master data manually and we are able to see the new data is available against the customer.
But when we refresh teh report, for that customer we are able to see only F10 as the sales group,.
For cross check, we have sales group display property also. where we are able to see E49.
Please let us know why we are seeing inconsistency between display and navigational attribute for a same infoobject.
Thanks. Karthik

Hello,
It seems Master data is not activated properly....
Whether the query is fetching data from Aggregates, if so you have to do Attribute changerun for this infoobject
goto SE38 and run this program RSDDS_AGGREGATES_MAINTAIN it will Info object name...Provide your info object and execute...
Your problem will solve.
Regards,
pavan.

Similar Messages

Navigation Attribute is not getting displayed as in Masterdata Table

Hi All,
I have an infoobject "YDOCUMENT" compoundedd with "S_ORD_ITEM". Also i have added few attribute (Reason for rejection and Order Status) for the same. This infoobject is getting updated through data load from Sales Order Item level DSO and it will contain the Reason for rejection and ORder Status for each Sales ORder and item combination.
After performing the data load i am able to see the attribute successfully getting updated into the master data table as expected, But when i run the Bex report and disply these Attributes as Nivugational Attributes, I am gettign the value as "Unassigned, and i am getting the proper result from the infoobject master data table.
Can anyone give me any idea why this is happening? How we can i fix this issue?
Thanks,
Muruganand.K

Hello All,
The issue is due to the SID generation failure for the Attribute, This didnt happen properly because i am inserting the records into the infoobject during the data load to another DSO.
Now i am doing a Direct data load to the infoobject to update the attribute this is solving the issue.
Regards,
Muruganand.K

Navigational attribute data not visible in BEx Report

Hello All,
I am facing following problem in one of my BEx reports:
I am fetching data from an ODS. With other columns of ODS, I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in Adm. Wrkbench the data is visible. I wonder what step is missing.
Many Thanks for helping me out.
Best Regards,
Sumita

Hi Roberto,
While trying to activate the Infoobject's master data (by right-click) I get the following message,
"Lock NOT set for: Loading master data attributes"
And the data is not activated.
Can you please suggest what needs to be done.
Thanks & Regards,
Sumita

Lmstat not properly displaying users (linux)

Hi all,
A linux-based shake license server at our facility is not able to properly display current users. The lmstat command will show the licenses available, but not the current activity. This is for Shake v4.1 and v9.2 of the Globetrotter flexlm tools. Is this a known bug? Thanks in advance.

Dear Guru,
I am also facing the same problem. What you had faced earlier. Can you explain the detailed solution to resolve this
problem. BI query not properly displaying in Consumer Portal - Through FPN - RRA.
If you can explain the solution that will be great.
With Thanks and Regards,
Anil Kumar.

BI query not properly displaying in Consumer Portal - Through FPN - RRA

Hi Everyone,
we have implemented FPN between EP 7.0 and BI 7.0 . A role with BI reports (iview created using Bex7.0 template) are working fine in BI Portal.
When its RRA to a users in EP-consumer portal, its not coming properly. I mean it shows some default header/Menu (like New Analysis Open, Save As, Information, Send etc..) in EP but not displaying the details of the report. Other URL iviews are working fine in RRA, just BI query is not coming properly. All pre-requisite for FPN is done properly and SSO configured.
Appreciate if some one can provide a solution
Thanks

Dear Guru,
I am also facing the same problem. What you had faced earlier. Can you explain the detailed solution to resolve this
problem. BI query not properly displaying in Consumer Portal - Through FPN - RRA.
If you can explain the solution that will be great.
With Thanks and Regards,
Anil Kumar.

Why do TOC do not properly display levels,... even after I set them to?

All,
I am having a major hard time trying to get my TOCs to properly display levels. I have been doing research on the subject, but it seems any recommendations have proved futile.
The issue:
My ID docs TOC's do not display levels at all
I have pretty much tried everything. I have gone to simple styles for Chapters and Sub Chapters to see what the issue would be
Image:
Some Findings
One article I found which outlined ID having issues with inset text boxes
It seems setting an inset on text boxes with TOC content affects the display of such
I tried removing any insets but results still did not fix the issue i face
Questions
What the hell am i doing wrong?
Is this a bug in ID CS6?
Is there anything I should not be doing when formatting a style that will be used on the TOC?
Are there any "NO NOS" I should be aware of here?
I mean, the above image is a test i built using a bare bones approach. The "Chapters" and "Sub Heads" styles are truly basic formats. The only attributes to these styles is a change in font style and size:
Thank you to anyone who can help me on this.
PixelNovae
ID 6 (v8.0)

Hi all,
Thanks to everyone for all your comments. To remove any possible conflicts, I did not apply any entry styles to the entries because i thought:
The TOC function generate levels independent of styles
Levels are automatically applied to any entry (TOC levels override everything else)
That levels override any styles one may apply to the entry
Basically, I do not need a style to create an indentation in my TOC. Levels create the indentation. (thus my example using the default ID Basic Paragraph Style)
Are the above assumptions wrong? If I am wrong, then are you guys saying I would need to create a TOC specific style denoting indentation for ever level?
IOWs, following my example:
Chapters = LV1 = Create a "TOC Paragraph Style X" that indents (say) 0pxs
Sub Heads = LV2 = Create another "TOC Paragraph Style Y" that indents (say) 20pxs
On the table of contents I would need to apply each their corresponding style in order to create TOC indents:
"Chapters" ---> TOC Paragraph Style X
"Sub Heads" ---> TOC Paragraph Style Y
If this is the fix, then I must say that this is a very cumbersome approach. (Hell, I would ask, why give me the levels option in the firts place in the TOC dialogue box!) If I have a book with a ton of levels, it will be pretty darn hard to manage so many styles.
PS: sorry I omitted one dialogue screen in my original post. Here is what I am doing.
Thanks again. I'm perplexed at this, but nevertheless thankful for all your shared insight.
PixelNovae
ID CS 6

Navigation Attribut is not shown in two rows in the Query

Hello,
we are using a multiprovider with the infoobject 0material. In the multiprovider we use a navigation attribut MH_PR_ST of 0material.
Normally, the query rows should show the material number and the corresponding attribut MH_PR_ST, but in some materials in the multiprovider exist some rows where the attribute is shown correctly from the master data table and in some rows the attribute is not shown.
Therefore in the query two rows are shown:
Material No. MH_PR_ST Key Figure
4711           A                    10
4711           #                       5
Sum                                  15
With all other navigation attributs there is only 1 row.
Do you have any good ideas?
Thank you very much + best regards,
Ilona

Hi,
Assuming the second row comes from one of your basic cube; since it looks that 0MATERIAL is populated (it is coorectly identified), ensure that the identification of the nav 0MATERIAL__MH_PR_ST is done properly in your multiprovider.
hope this helps...
Olivier.

Navigational attributes are not visible after transport

hi,
i have created five new info objects and added these to 0custome as navigational attributes,then i have switched thes on as navigational attributes in 0sold_to info object.every thing is working fine in deveopment.
when i transport these into quality, for 0customer i am able to see these new info objects as navigational but in 0sold_to these new info objects are visible as display attributes.I want tehse to be as navigational attributes..
can any one tell me where have i gone wrong..
thanks in advance..
satish

Hi,
The SAP Best Practice says that while transport
Request 1: Select the Necessary objects of Info Provider
Request 2: Select Data Flow before and Afterwards
if you practice this you will not miss any objects
regards
Happy Tony

[Error]List attribute binding not properly updating Iterator value

Hi,
I created an ADF Form page with ADF navigation buttons. Along with that I added Create, Commit and Rollback buttons in the form. One of my attributeValue binding i changed it to dynamic list binding with another iterator (LOV style). I removed all field required properties to false and put showRequried property with corresponding binding attribute mandatory option in order to avoid alert messages. I also removed disabled option of commit and rollback to false option so that every time it will be enabled. There are fields in the form which are set as mandatory from entity. List is also a mandatory attribute.
When I press next, pervious buttons List points to corresponding LOV value perfectly. Now I press create and press submit without filling mandatory fields, JBO error is thrown. e.g. "JBO-27014: Attribute RociType in RociView is required". Now i press Rollback button, it comes back to first record. but List is showing empty. Again if i press Next button also, list value shows empty. When I printed the value of List attribute in an outputText #{bindings.RociType.inputValue} shows blank and #{bindings.RociType.attributeValue} shows orginal record value. #{bindings.RociType.inputValue} should show the corresponding index of iterator. Somehow after rollback this index is not properly updating.
Please help to solve this problem.
Details:
JDeveloper version 10.1.3
Project is JSF with ADF BC
Regards,
Santhosh

Hi,
After doing debug I understood that Rollback is not clearning Error list inside IteratorBinding. Due to that it is not getting proper input value. Please find the code for getInputValue() inside JUCtrlListBinding class.
    * Primarily for spel support. Could be removed prior to 905Prod and merged into a get()
    * method for spel-access.
    * <p>
    * Returns the last input value for the first attribute on this binding if this value
    * raised an exception. Otherwise returns the value from the model object calling
    * getAttribute(0);
    * @javabean.property
   public Object getInputValue()
      getError();
      if (mErrExc != null)
         return mInputVal;
      int sel = getSelectedIndex();
      if (mInputVal != null && (sel == -1 || sel == mNullValueIndex))
         return mInputVal;
      return new Integer(sel);
   }Is there a way to clear Errors inside Iteratorbinding when I press Rollback ???
Regards,
Santhosh
null

Navigational Attributes are not shown in query

Dear all,
I have a problem in a query. I need to present values using by using Navigational attribute in the query, the thing is that it does not recognize my navigational attribute. I have checked the characteristic in the Multiprovider and Infocube as navigational. And in the Multiprovider I have identified the navigational attribute from the right source.
What I think is strange is that I can see the navigational attribute when I see the data in infocube but not in the query. Does anyone knows what I might be doing wrong?
Best Regards and many thanks,
Mazzz

Hi
plese try to find out the data for this fields through LISTCUBE,if you gets data here for that navigation attr then it has to appear in your query designer also.
and also once again check your idetification for the navigation attr in multi provider whether its taken from write souce or not.and plese chk through your cube also for the navigatin.
in cube navigational attr has to mark then in the same way in the multi provider also
mahesh
Edited by: Mahesh Kumar on Jun 2, 2008 10:47 AM

Master data values(navigational attributes) are not turning up in the cubes

Hi all,
I have a cube, which contains 0cust_sales as master data and i have clicked on the navigational attributes of 0cust_sales like customer grp1, 2,3,4,5 etc
But then i have the 0cus_sales number 6100034 with all the navigational attributes turning up when i look up at the master data in the quality system.
But then for the same customer number i can see the customer number but no navigational attributes are turning up!!
I have activated master data and the master data contents are active!!
Can anyone pls update me on this!!
Thanks
Pooja

Hi
It is not part of dimension only 0CUST_SALES is part of dimension,
And ocust_sales-customer grp1, 2,3,4,5 are navigational attributes in the info cube. I have just included them as navigational attributes enabled in the info cube.
And when i loaded the data for customer say 6111035 from the ods to the cube. I can see the data for customer 6110035 but cant see the navigational attributes getting populated.
But when i look at the same in the master data for 0cust_sales i can see the values for the navigational attributes too!!
Thanks
Pooja

Some fonts I use for my iWeb-made site are not properly displayed on other computer. How can I sort it out?

Hello everybody.
I have made a website and I have noticed that some fonts and some background shapes are not correctly displayed on other computers (non Mac users).
Could you help me to sort out this problem?
Thanks
Andrea

It's not a browser issue per se either.
You see the Font because the font is your computer. The same font has to be on the computer of your visitor.
iWeb use a substitute font based on a font list it uses. If that substitute font is missing too, the browser chooses a similar font, which is not always the one you want.
You can force your font to display on a PC (but not with Internet Explorer) using a custom stylesheet with an embedded font. See it here :
http://www.wyodor.net/mfi/global/Blank.html
http://www.wyodor.net/_Demo/Fancy/Dynamic_Text.html
http://www.google.com/search?q=embedded+font

Navigational Attributes are not working in Excel

Hi,
In my report output I have few navigational attributes i define when I filter the values for example Location as define Navigational attribute I am selecting Location = ABC in report after some time my excel is disconnecting?
I am thinking what would be the problem?

hi randy,
i guess u have some connection problem.
u can use tcode RSRT and RSRCACHE u can use option debug to check weather any problem occurs because of navg attr.
i consider there should be some bex problem.
byebye

New MacBookPro 13" (early 2011) not properly displaying 1920x1200 on an external display

Hi,
A week ago I got a new MacBookPro 13". Early 2011 model, the ones that now come with an Intel HD Graphics 3000 video card. I am connecting it to a Sun 24.1" LCD Monitor v4 (http://www.oracle.com/us/products/servers-storage/desktop-workstations/030743.ht m) through a Mini DisplayPort to VGA Adapter. Supposedly the Sun monitor is running at 1920x1200 @ 60hz (with the MacBookPro at its original resolution of 1280x800).
The problem is that the image on the Sun monitor is not using the whole screen. The MacOs is 10.6.7 and I have downloaded all updates as of today (June 13 2011). I am *not* mirroring displays, of course.
Now, for the record, I still have my old MacBook 13", which the new one was supposed to replace and this problem is *not* present. 1920x1200 on the external Sun display uses all the screen. That laptop has an NVIDIA GeForce 9400M video card. Its MacOS is also 10.6.7, with all software updates as of today.
My current suspicion is the new MBP is somehow trying to force the aspect ratio of the external display to be that one of HD, but it is only a suspicion. Any help with this please? Is something known? Is it a feature or a defect of my laptop and I should try to get another one? If it is a feature, does it mean that I will not be able to fully use any of the three 24.1" Sun monitors that I have? (one at home, one on each of my two offices?)
Thanks...
Manuel

For some reason, using a dvi adapter instead of a vga one works fine.

Attribute AgentUser not getting displayed

I m trying to configure OIPM
1. Access the Oracle I/PM domain in Oracle Enterprise Manager 11g FusionMiddleware Control at the following URL: http://localhost:7001/em
2. Log in as the Administration user (for example, weblogic).
3. In the navigation tree, expand Application Deployments, and then click the imaging application.
4. On the Application Deployment menu, select System MBean Browser.
5. On the System MBean Browser page, close the com.bea folder under Configuration MBeans.
6. Expand the oracle.imaging folder under Application Defined MBeans.
7. Expand the Server: <server_name> and config folders. The default server name is IPM_server1, but it can be changed when installing I/PM, so ensure you are
configuring the correct server.
8. Click config.
however I do not see the attribute : AgentUser... Is there any specific way in which this attribute is enabled.

There is no need for AgentInput user id as the system will use the logged on user id. The documentaton is incorrect.

Navigational Attribute is not properly displaying

Similar Messages

Maybe you are looking for