Navigational attribute: "not assigned"

Hi all,
I have a strange situation where I have a characteristic (0NOTIFICATN) in a cube (0QM_C10), where the (navigational) attributes of 0NOTICATN show up as "# not assigned" when I try to report on them.
I have checked under master data maintanence for 0NOTIFICATN that for all notification the attributes have the value I expect.
The attribute I am most interesed in is notification type (0NOT_TYPE), and I have found out that if I add the infoobj 0NOT_TYPE to the cube I can report on it. That means that instead of getting the notification type as an navigational attribute on notification I have to add it to the cube...
(The same argument holds for several other infoobjects and several cubes.)
Am I missing something obvious here?

Thank you. That solved the problem.
That is, it works in other cubes, that had the same problem, but it does not work with the cube 0QM_C10 that I have modified several times during my debugging...
I get the error, that the infoobject 0NOTIFICATN__0NOT_TYPE does not exist. I have checked that 0NOTIFICATN is in the cube and that it is a navigational attribute....
Regards,
Christian

Similar Messages

Data for navigational attributes # Not Assigned

Hello friends,
Our report is based on Multiprovider which is based on 5 cubes.
These five cubes has one particular Characteristics which hasnavigational Attribute .
We are using the navigational attribute directly under free characteristics Tab in Query.
We are also using Characteristic in Query - for characateristic data is shown in report.
In report we are able to see data as # Not Assigned for navigational attributes.
When we checked data at info object level for that characateristic, correct data is shown for that navigation attributes.
We have checked following settings
At characteristic level - Uncheck Attributes only
At cube level all navigational attributes are checked
In Multi provider identification table - This navigational attribute is checked for all five cubes
In Multi provider Navigational Attributes Tab - This naviagtional attributes is checked
Activation of Master data was done once again
we are not getting any other ideas, can any one please suggest us where the problem is?
Thanks
Tony.

Hi Tony
I have the exact same problem. Did you find out what the problem was?
KR Nete
Edited by: Nete Grøn Jacobsen on Jul 14, 2008 1:51 PM
I solved my problem
1. Activate the navigation attribute(s) on the underlying basiscube, from which the query displays data
2. Choose the navigation attribute(s) for all relevant basiscubes (multicube -> Change -> Button Identification)
See also:
KR Nete

Navigational attribute not showing correct values

Hello,
I have a Notification cube Z_QM_C09, Apart from other infoobjects, it has Notification (0Notificatn) and one of its Nav attr 'Esc Category (0NOTIFICATN_/BIC/Z_ESC_CAT).
The Master data for one of the Notification is as shown below
/BI0/PNOTIFICATN - Master data table
   SOURSYSTEM   NOTIFICATN         OBJVERS   /BIC/Z_ESC_CAT
   P1                        005000482694    A                (Blanks)
/BI0/XNOTIFICATN - SID Table attr
Notification SID      OBJVERS     SOURSYSTEM       NOTIFICATN          S__Z_ESC_CAT
   30,233,260            A                   P1                          005000482694      7
However, when I check the data in the cube for the same Notification, the data is as shown below;
Notification         Notification SID      Z_ESC_CAT    Z_ESC_CAT SID
5000482694         30,233,260            ESC2               7
Can anyone throw some light on why this would be happening?
Thanks for your input!
Bala

Hi,
I believe Master data was loaded after the Transactional Data.
You can do a full load for the Master data from the Data soruce from the Navigational Attribute is beng updated.
And then acitvate it, No need to load the Transaction data as in the cube the value of Notificaiton is being refered from Master data.
The above load will not have any side affects and is worth trying for.
Hope this resolves.
Thanks,
Karan

Navigational Attributes Not Available in Query Designer

I don't see navigational attributes under Dimensions/DimensionA in Query Designer. Is there a switch to enable/disable nav attr. in BW?

Hi,
Yes you need to switch on Navigational charateristics at DSO/CUBE and then add them to MultiProvider Dimension and assign then assign the fields.
Thanks,
Nagarjuna

Navigational Attribute not found on Query for an Infoset

Hi Experts,
I have created Infoset on two DSO's and when i'm trying to query on it i'm not able to find the Navigational Attribute which are selected on both of the DSO's.So in order to get the Navigational Attribute on the query of the Infoset what should i need to do.
Pls Help.
Thanks in Advance.
Amit

Hi Amit,
There is no other way to achieve this from the Infoset....
As suggested by Tulsi.. u can include them in the DSO level.. but it requires enhancement and reloading etc.. and its costly..
Or is it possible to join the master data infoobject if the design works out.. but this also depends how many number of Attributes from how many number of MD that u are looking into..!!
Thanks
Hope this helps

Navigation Attributes not populated

Hi ,
I am stuck in a situation with the Master data Navigational Attributes.
I created a "ZMAT" master data infoobject which has the Navigation attributes like "Product Platform". Everything has worked in quality and development but after transporting it to
production the navigational attribute is not being populated in the listcube.
I loaded the data in the master data infoobject and it gets loaded successfully.
I can even see the data for the attribute in the ZMAT master data "manage master data" after the load but when I try to select the navigational attribute in the listcube it doesn't populate anything for that attribute .
I have trying moving the transports thrice from dev to prod but no respite.
Request someone to look and provide a resolution.
Your help will be highly appreciated and points awarded as well
It is worth mentioning that the master data IO is a copy of Material and customized.
Thanks
Shan

Hello,
Make sure you are checking the same 'ZMAT' Keys in both Transaction (Cube) and Master data. Also check whether there is some compounding charateristics to ZMAT. In that case, consider compounded characteristics as well as a Key while comparing the Transaction and master data.
Thanks

Integrated Planning - Navigation attribute not shown for Planned figures

Hello,
I have created a Input ready query to get the actual figures from previous years and enabling users to enter the planned figures. I have created Planning functions to copy and revaluate.
Reg   Account    Actual         Planned
US         123000     $3000         $4000
US         124200     $5000         $6000
I have one more report where it shows the Actual & Plan comparision.
In the Actual & Plan comparision report I have an additional Navigational attribute SIC code to be shown for each account.
My Actual & Plan comparision report should ideally be seen like below.
Reg   Account    SIC Actual         Planned
US         123000      3026         $3000         $4000
US         124200      4325         $5000         $6000
But it is showing as below where it has # for Planned figures and it shows blank.
Reg   Account     SIC   Actual         Planned
US         123000      3026         $3000         <blank>
US         123000      #              <blank>       $4000
US         124200      4325         $5000          <blank>
US         124200      #              <blank>        $6000
SIC Code is a navigational attribute of account. What changes do I have to do to make the SIC code to be shown for planned figures.
Any help would be highly appreciated and rewared.
Regards,
KK

I figured it out. I didnt assign the navigation attribute to the plan cube in the multiprovider. Thanks!!
Edited by: KK on Feb 19, 2008 10:12 PM

Default marketing attribute not assigned by BAPI.

Hi,
I have a requirement where I am creating Person type BPs in CRM from
XApps. I am using the standard bapis for this purpose.
In CRM, I have created a Marketing attribute set. I have made this
marketing attribute set default for Person type BP.
When I create a new person type BP in SAP GUI, this Marketing Attribute
set is getting assigned to the BP.
However , when I create a person BP using the
BAPIs 'BAPI_BUPA_CREATE_FROM_DATA' and 'BAPI TRANSACTION COMMIT', the
BP is created but the marketing attribute set is not getting assigned.
I think the configuration should work in both the cases.Please let me know whether I am missing out something.
Thanks,
Samrat..

Hi,
i am trying to upload characteristics data for class using BAPI_OBJCL_CHANGE module. Now when people who knows this function module ,they must be knowing that we have 3 tables there for Char data,numeric data and currency data. Now when i upload the data from excel sheet in to SAP ,i put space in some of the cell with numeric data type but this function module put 0 in those characteristics instead of space.Now user want to see space there instead of 0. Is there any way around to have space rather than 0.
i am updating the customer classification with the function module BAPI_OBJCL_CHANGE:
call function 'BAPI_OBJCL_CHANGE'
exporting
objectkey = w_objkey
objecttable = 'KNA1'
classnum = w_classnum
classtype = '011'
keydate = sy-datum
tables
allocvaluesnumnew = i_ze_valnum
allocvaluescharnew = i_ze_valchar
allocvaluescurrnew = i_ze_valcurr
return = i_return.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = c_x.
In addition, I am checking with ENQUEUE_EXKNA1/DEQUEUE_EXKNA1 whether or not the customer master is locked before executing the code above.
Thanks&regards,
Naresh

Marketing attribute not assignable with language PL

Hi *,
I have detected a strange behaviour when maintaining "some/special" marketing attributes for BP in logon language PL.
The affected attributes are configured as follows.
Format                   No. Chars      Dec.Places      Meas. unit      Sing-val
Numeric Format         3                    0                    %                   X
The usage for EN/DE is fine but when trying to maintain a value like '30' using logon language PL the below mentioned error occurs. But obviously I don't use intervals etc. Just a single figure.
Attributes with the following settings do not lead to an issue:
Format                   No. Chars      Dec.Places      Meas. unit      Sing-val
Numeric Format        10                    0                                          X
DETAILS ON ERROR-MESSAGE
Diagnosis
Possible causes:
Intervals can only be specified if you have set the indicator Intervals
Allowed.
You must specify the interval in the form value 1 - value 2 (there must be a
space both before and after the hyphen). No other character except a hyphen may
be used to separate the values.
A value can contain up to the same number of decimal places as specified in
the Decimal Places field.
The value in the field Number of Chars defines the total number of
characters, including decimal places (for example: If the number of characters =
3, and the number of decimal places = 1, then 20.1 is valid, but 300.1 is not
valid).
You must define the decimal point and the thousand separator according to
your user settings.
Procedure
Use the value help, if available, to select a permitted
value. If there is no value help available, check the data type of the marketing
attribute."
To exclude the possibilty the attribute could be "damaged" I created a new one with same options and got the same language dependend behaviour.
Any ideas?
Kind regards
Thomas

Any ideas/impressions?

Attribute value 'Not Assigned'

Hi..
i have created navigational attributes for a characterstic(z_custid) in a cube.At cube level i am able to see the values for those attributes.. but when i am trying to generate a report on this at attribute columns values are not displayed.whole column i am getting values 'not assigned'.Can anyone help me on this..
Mahi

Hii..
thnks for ur reply..please find the answers for the questions u posted.
I am able to check the data of navigational attr in infocube..
Navigational attr's are checked in the infocube..
Master data is active..
while reporting only i am not able to see my data for navigational attr's..
Mahi..

Path Not found error when try to drag Navigational attribute in report

Hi Gurus,
I have created report on Multiprovider. When I try to drag navigational attribute in report getting error path not found.
I have checked Following and it's Proper.
1) Multiprovider is active
2) whether Navigational attribute is identify assign in cubes.
3) whether sid table thr for info-object.
4) I could see data in Multiprovider as well as in Cube
I created report on cubes also and getting same error.
Please suggest.

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

Attributes are not displaying in Navigational Attributes area of DSO.

Hi Experts,
I have created a DSO and have included Info Objects 0SOLD_TO & 0SHIP_TO. In the Navigational Attributes area, its attributes are not getting displayed even though the attributes are in the info object.
What are the steps needed to perform for it to display there?
Waiting for your reply,
Thanks in advance,
With Kind Regards,
Shreeem

Hi Shreem,
If you want attributes of any master objects in navigational attributes section, you have make them navigational attributes while defining base info object.
Please follow the below steps.
1) goto RSA1, search for 0SOLD_TO & 0SHIP_TO info objects and open them
2) goto edit mode of info object and goto attributes section.
3) here you will find for every object "DIS" --- this means these attributes are display attributes.
4) If you want to change any attribute to NAV, then click on "Pencil Mark".
5) Now you can see text NAV instead of DIS for that attribute.
activate the info object and goto DSO, now you will see that attribute in navigational attribute folder.
Regards,
Venkatesh

Navigational Attribute Transported but not reflected.

Hi,
Couple of Navigational Attributes were transported from Dev to QA.
But its not reflecting in QA now.
In the Transport Log its giving the warning message message as,
Navigation attribute ZABCLOC_ZZLINETYPE1 is deleted (not in characteristic ZABCLOC)
Navigation attribute ZABCLOC_ZZABCLOC1 is deleted (not in characteristic ZABCLOC)
Please let me know, how to transport the required Navigational Attr from one system to another system
Thanks,
Sowrabh

if the primary object is not active then u will face issues..
here as its quality u can try deleting the P table content of the Infoobject and then try activating that infoobject in the Quality system with the program.. some this like it starts with RSDG or RSVDIOBJ Activate.. u can try this in ur system...
and then try reimporting it with the overwrite mode.. this is will solve ur issue.
thanks
Vishnu

Navigational Attribute is not properly displaying

Hello,
We have a "Sales Group" navigational attribute YCUST_SAL-YSALE_GRP in a BW report. We have adjusted a sales group for a customer in R3 from F10 to E49 and hte same has been pulled to BW side,.
we have activated the master data manually and we are able to see the new data is available against the customer.
But when we refresh teh report, for that customer we are able to see only F10 as the sales group,.
For cross check, we have sales group display property also. where we are able to see E49.
Please let us know why we are seeing inconsistency between display and navigational attribute for a same infoobject.
Thanks. Karthik

Hello,
It seems Master data is not activated properly....
Whether the query is fetching data from Aggregates, if so you have to do Attribute changerun for this infoobject
goto SE38 and run this program RSDDS_AGGREGATES_MAINTAIN it will Info object name...Provide your info object and execute...
Your problem will solve.
Regards,
pavan.

Navigational attribute: "not assigned"

Similar Messages

Maybe you are looking for