Navigational Attributes Not Available in Query Designer

I don't see navigational attributes under Dimensions/DimensionA in Query Designer. Is there a switch to enable/disable nav attr. in BW?

Hi,
Yes you need to switch on Navigational charateristics at DSO/CUBE and then add them to MultiProvider Dimension and assign then assign the fields.
Thanks,
Nagarjuna

Similar Messages

Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

Mapped characteristics in Multiprovider not available in Query Designer

Hi,
we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer. Is there maximum limit for the number of characteristics.
Thanks,

Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

Attribute not visible in Query Designer

hi BI Gurus,
I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the cube in which the main char is used looks fine.
I have checked all the options in RSECADMIN, everything looks good.
pls help me in finding the solution..
thanks
Cnu..

check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
check out with the infocube whether u r checked the check boxes in navigational attribute tab.
regards
harikrishna.N

Navigational Attribute not found on Query for an Infoset

Hi Experts,
I have created Infoset on two DSO's and when i'm trying to query on it i'm not able to find the Navigational Attribute which are selected on both of the DSO's.So in order to get the Navigational Attribute on the query of the Infoset what should i need to do.
Pls Help.
Thanks in Advance.
Amit

Hi Amit,
There is no other way to achieve this from the Infoset....
As suggested by Tulsi.. u can include them in the DSO level.. but it requires enhancement and reloading etc.. and its costly..
Or is it possible to join the master data infoobject if the design works out.. but this also depends how many number of Attributes from how many number of MD that u are looking into..!!
Thanks
Hope this helps

Key Figure Attribute not displaying in Query Designer

Hello Experts,
I have an InfoObject which has Key Figures as attributes. When creating a query I <b>once</b> was able to see these Key Figure attributes in the Query Designer. Howerver, recently I am not able to see them anymore in our DEV environment.
In our QA and PROD environment I am to see these Key Figures attribues in Query Designer. Is there a setting that I am overlooking? We are currently on BW 3.5 with SP 19.
Please help!
Thanks in advance,
BQ

Hi Jaya,
Thanks for the quick response. But how to I check the authorization for 1KYFNM and what am I looking for?
Thanks,
BQ

SAP-Exit option not available in Query Designer

Hi,
I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
Regards,
Alexander

Hi, I think I didn't explain my problem right:
I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
Thanks,
Alex

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

Custom Attribute not available in Available Fields section of Configuration

Hi Experts,
My requirement is to add a custom search field in contact search screen. For that i tried various options
Option1
Added a model attribute in component/view BP_CONT SEARCH/Search. The attribute got successfully added. But when i opened the Configuration tab, i could not see the attribute in the available fields.
Option 2
In the view CRMVC_SDESIGN, i created a new entry for my attribute in object type: BP_CONTACT and design object . But doing so, i got an error and was not able to add my attribute
Option3
Since the View context node 'Search' is bound to the Component Controller Context node 'Search'. I created my custom attribute in compoennt controller also. But this also did not help.
Option 4
I deleted the enhancement of the view and created a new enhancement. I created a value node in Search context node. But still the attribute is not available in the Availble Fields in the Configuration of component/view BP_CONT_SEARCH/SEARCH.
Kindly provide your valuable suggestions to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 6, 2012 7:28 AM

Hi Radhika,
You need to enhance the search query structure as well in order to get the field in the configuration.
You can find the BOL structure for the corresponding context node bol model.
In your case, the BOL model is the search object 'BuilContactAdvancedSearch'.
The corresponding structure can be found at the BOL Model Browser, under Dynamic Query Objects
for the search object 'BuilContactAdvancedSearch'. The corresponding structure 'CRMT_BUPA_IL_CONP_SEARCH'
has to be enhanced with the new custom attribute. Only then, this field would be available in the configuration
when the following htm code gets executed when you open the configuration tab.
<thtmlb:advancedSearch id                = "advs0"
                                 fieldMetadata     = "<%= controller->GET_DQUERY_DEFINITIONS( ) %>"
                                 header            = "<%= SEARCH->get_param_struct_name( ) %>"
                                 fieldNames        = "<%= controller->GET_POSSIBLE_FIELDS( ) %>"
                                 values            = "//SEARCH/PARAMETERS"
                                 maxHits           = "//SEARCH/MAX_HITS"
                                 ajaxDeltaHandling = "false"
                                 onEnter           = "search" />
Here you can see that, it reads the parameter structure using the method SEARCH->get_param_struct_name( ) of
the context node.This is used for configuration as well.
Also if you have an F4 help for your custom attribute, you have to add it in the GET_DQUERY_DEFINITIONS( ) of the
view controller. These additional information will help you to understand better.
Regards
Leon
[SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

IP - Aggregation Level not showing in Query Designer as infoprovider

Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya Kulkarni

Hi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni

Data for navigational attributes # Not Assigned

Hello friends,
Our report is based on Multiprovider which is based on 5 cubes.
These five cubes has one particular Characteristics which hasnavigational Attribute .
We are using the navigational attribute directly under free characteristics Tab in Query.
We are also using Characteristic in Query - for characateristic data is shown in report.
In report we are able to see data as # Not Assigned for navigational attributes.
When we checked data at info object level for that characateristic, correct data is shown for that navigation attributes.
We have checked following settings
At characteristic level - Uncheck Attributes only
At cube level all navigational attributes are checked
In Multi provider identification table - This navigational attribute is checked for all five cubes
In Multi provider Navigational Attributes Tab - This naviagtional attributes is checked
Activation of Master data was done once again
we are not getting any other ideas, can any one please suggest us where the problem is?
Thanks
Tony.

Hi Tony
I have the exact same problem. Did you find out what the problem was?
KR Nete
Edited by: Nete Grøn Jacobsen on Jul 14, 2008 1:51 PM
I solved my problem
1. Activate the navigation attribute(s) on the underlying basiscube, from which the query displays data
2. Choose the navigation attribute(s) for all relevant basiscubes (multicube -> Change -> Button Identification)
See also:
KR Nete

Infoarea not appearing in Query designer

Hi - I have some cubes created under cross application components infoarea but the infoarea is not appearing in the query designer. I have to create reports on these. how can I see them in query designer?
Thanks,
Raj.

Hello,
Please check your role. You do not have the authorization for that infoarea.
Hope it helps,
Regards,
Meric

G/L Description not showing in Query designer for Characteristic values

Hi Friends,
We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
Can you please guide me in this regards
Thanks & Regards
Anand

Hi Thanks for your reply.
The accounts which we selected are having Description and it is showing while selection the selected GL Accounts.
And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
Any more suggetions..........
Regards,
Anand

Navigational Attribute Problem in Input Query

Hi,
I am having a problem in input query implementation which uses a navigational attribute. I have, for eg, only one char 'customer' in rows; i want to exclude the customers with the status D (deleted) from displaying (Status is nav. attr. of customer). I tried this by restricting in filter, Status D-"exclude". But as soon as I do this, query no longer remains input ready! (I also tried putting the same restriction in Default Values area rather than Filter, but ended with the same result )
I discovered that if, furthermore, I put Status in rows (with the above said restriction still remaining), query is again input ready.
Can't we exclude values in the filter on an input query? I want to know if this is a restriction with IP or a bug?

Hi Gregor,
Thanks for the explanation. But this makes me wonder, because due to this restriction one of the BIG advantages queries had over the planning layouts of BPS, seems to be gone. I mean, using navigational attributes for filtering; if we have to always have a single value restriction on a nav. attr., this will really be restricting. Is it expected that this will be changed in a later SP?
And there is another problem that is coming due to this. When I use the exclude filter and also the nav. attr. Status in rows, then the query becomes input ready, but there are warning messges displaying when the query opens saying -
Characteristic Customer has no master data for "C1"
Characteristic Customer has no master data for "C2"
etc... (these are the customers with status D). We are on SP15.
Please suggest what should I do to get rid of these messages?
Edited by: Mayank Gupta on Apr 10, 2008

Navigational attribute not showing correct values

Hello,
I have a Notification cube Z_QM_C09, Apart from other infoobjects, it has Notification (0Notificatn) and one of its Nav attr 'Esc Category (0NOTIFICATN_/BIC/Z_ESC_CAT).
The Master data for one of the Notification is as shown below
/BI0/PNOTIFICATN - Master data table
   SOURSYSTEM   NOTIFICATN         OBJVERS   /BIC/Z_ESC_CAT
   P1                        005000482694    A                (Blanks)
/BI0/XNOTIFICATN - SID Table attr
Notification SID      OBJVERS     SOURSYSTEM       NOTIFICATN          S__Z_ESC_CAT
   30,233,260            A                   P1                          005000482694      7
However, when I check the data in the cube for the same Notification, the data is as shown below;
Notification         Notification SID      Z_ESC_CAT    Z_ESC_CAT SID
5000482694         30,233,260            ESC2               7
Can anyone throw some light on why this would be happening?
Thanks for your input!
Bala

Hi,
I believe Master data was loaded after the Transactional Data.
You can do a full load for the Master data from the Data soruce from the Navigational Attribute is beng updated.
And then acitvate it, No need to load the Transaction data as in the cube the value of Notificaiton is being refered from Master data.
The above load will not have any side affects and is worth trying for.
Hope this resolves.
Thanks,
Karan

Navigational Attributes Not Available in Query Designer

Similar Messages

Maybe you are looking for