Navigational attributes time dependent in queries
Hello Guys,
I have a doubt, I have a master data with navigational attributes and time dependent and I need display from a query a comparative date between 2 navigational attributes; the value of the master data's attribute navigational and time dependent.
It is possible?
Thank you very much.
Regards,
Jeysi
I describe the case again:
I need display a comparative between 2 time period based in navigational attributes in a Query.
It is possible? I think that only a date is possible because the key date controls the output to the date specified or by default to today. Is it correct?, if I need keep historical information must save in the cubo each attribute neccesary for comparation to a period.
Thank you very much.
Regards,
Jeysi
Similar Messages
-
Hello
I have a problem with the master data of "asset sub number"
Theses master data are with the status "A"
But when I want display these caracteristics on business explorer with a simple keydate, I have always not assigned
Have you got an idea?
Thanks youHi Jeremy,
Welcome to SDN!
Do you want a reporting on "asset sub number"? Is it an attribute of another infoobject? If yes, then of which attribute? Is this attribute display/navigational, time-dependent?
Or you want a query on attributes of "asset sub number"?
What is your infoprovider, master data infoobject or a cube/ODS?
If you want to get rid of unassigned, you need to provide the value of the infoobject to your infoprovider. Have you done this?
Best regards,
Eugene -
Show master data attribute time dependent for pervious period
hi
I would to know how get in report values of pervious period of attribute which is time dependent
(like person)Hi,
refer below threads might be helpful
[http://help.sap.com/saphelp_nw04/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/content.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/80/1a634be07211d2acb80000e829fbfe/content.htm]
Thanks -
Maintaining attribut time dependent master data
Hi all,
I have a question regarding normal system behaviour while maintaining BW Attributs with dependent master data. For example, I have created an infoobject like this:
- cod 40029, class 10 valid from 01.01.2008 until 31.12.2008
- cod 40029, class 10 valid from 01.01.2009 until 31.12.9999
But afterwards when I try to maintain master data and change the 2nd row (valid until the end of 2010) the system changes the requested row but also creates an extra line with same data valid until 9999
- cod 40029, class 10 valid from 01.01.2008 until 31.12.2008
- cod 40029, class 10 valid from 01.01.2009 until 31.12.2010
- cod 40029, class 10 valid from 01.01.2011 until 31.12.9999 (extra line)
Is this the standard behaviour? the fact is that with this behaviour the user allways needs to "delete" the fields cod 40029 and classe 10 to make the row "unuseful".
Regards,
Pedro
Edited by: Pedro Godinho on Jun 25, 2009 1:15 PMHi Pedro,
Yes this is the standard behaviour.
I am not sure where you are using this and why you need to make it unuseful.
If you are using it in BPS or IP. Create one more attrbute to this master data object, this would flag the usefulness of the timeslice.
You would then be able to filtrer to only useful timeslices in your planning/reporting.
Dont forget to make the flag attribute as navigaitonal attribute.This will allow selection for the flag in the report or filters in IP or BPS.
Hope this helps,
Best regards,
Sunmit. -
Navigational attribute issue-time dependent
Hi all,
I am working with 0PA_C01, I included some additional navigational attribute(time dependent )to 0employee, but when i am checking all these navigational attribute at cube level or Report , i can find only the latest values ,for eg i added Designation as a time dependent navigational attribute for 0employee, and the designation for a employee is changing after 12.2008 from VP to SVP ,at the cube and also in the report i can find only the latest designation for all the calmonth ie before 12.2008 also as SVP .
I checked the the time dependent Navigational attribute option to make designation as a time dependent navigational attribute ,and also ran the attribute change run .
Can anyone suggest some information to fix it?
Thanks
SandhyaDear Sandya,
Results correct only in your report. Time dependent attributes displyas data based on keydate. if no key date specified, system takes current date as key date and displays data.
So in your case latest data displaying. If you want to see any historic designations, you need to specify key date, which shold fall into that particular range.
Create a User entry variable for keydate and use.
Key date
Each query has a key date. For time-dependent data, the key date determines the time for which the data is selected. The default key date value is the date on which the query is executed, that is <Today>.
1. Click on the Key Date field. A dialog box with a calendar appears for you to select your key date.
2. Select a date from the calendar. If you select 01.01.1999 for example, time-dependent data is read from the 01.01.1999.
Note
The key date applies only to time-dependent data.
Check: [Query Properties|http://help.sap.com/saphelp_nw04/Helpdata/EN/07/0ab63c71f41d5ce10000000a114084/frameset.htm]
Srini -
Effect from build time dependent 2 attribute in info object master data
Dear all,
i creat time dependent 2 attributes in info object master data (ZCURRLUM) which use in info cube. after that i open workbook or query, it has short dump which error message
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
"HANDLE_UNCAUGHT_EXCEPTION"
Question: info object master data can't use more than a attribute time dependent???
i use in BI 7.0 level 14
thanks for your help
regards,
JoyHi Chandamita Sarmah,
I copy error code to you from line 1 to line 28
METHOD handle_uncaught_exception.
data:
l_r_program_error TYPE REF TO cx_rsbolap_program_error.
data: lBExDebug type rs_bool.
GET PARAMETER ID 'BEXDEBUG' FIELD lBExDebug.
if lBExDebug = rs_c_true or CL_RSTT_TRACE=>GET_TRACEMODE_CURRENT_TRACE( ) = rstt0_c_tracem
Break-point for debugging, e.g. during running a trace
break-point. "#EC NOBREAK
endif.
Subcall?
if P_RFC_CALL_DEPTH > 1.
Forward the exception
subtract 1 from P_RFC_CALL_DEPTH.
DATA: l_r_x TYPE REF TO cx_no_check.
TRY.
l_r_x ?= i_r_exception.
CATCH cx_root.
CLEAR l_r_x.
ENDTRY.
IF l_r_x IS INITIAL.
RAISE EXCEPTION TYPE cx_rsr_propagate_x
EXPORTING
previous = i_r_exception.
ELSE.
RAISE EXCEPTION l_r_x.
ENDIF.
endif.
All exceptions should have been caugth -> X-Message
Thanks a lot for your help
Joy -
Time dependent navigational attribute
Hi all,
I am new to BW, i would like to know what is time dependent navigational attribute and when we go for it.
with regards,
a.fahrudeenHi Fahrudeen,
You will go for a time dependant nav attr when the attribute values change with time and you need to maintain the history. When you use time dep nav attr, the value is always valid from a date to a certain date. Like for 0COSTCENTER, 0RESP_PERS is a time dependant attr becasue it is possible that for the same costcenter ABC was responsible person from 01.01.2004 to 12.31.2005, and then you have XYZ from 01.01.2006 till 21.31.2008.
Hope this helps... -
Monthly Report with time-dependent navigational attribute
Hi,
We've a characteristic costcenter that has a navigational attribute called segment which is time-dependent attribute.
CostCenter-Segment master data is as follows.
COSTCENTER Segment validFrom Valid To
============================================
CSTCNTER_1 SGMNT_A 10000101 20100831
CSTCNTER_1 SGMNT_B 20100901 99991231
Cube data is as follows. We don't have Segment in the cube. Also, no plans of adding segment to the cube.
COSTCENTER MONTH AMOUNT
========================
CSTCNTER_1 201007 100
CSTCNTER_1 201008 200
CSTCNTER_1 201009 300
CSTCNTER_1 201010 400
I'm trying to achieve monthly report by costcenter & segment as follows. Is there a way to achieve this?
COSTCENTER Segment MONTH AMOUNT
===============================
CSTCNTER_1 SGMNT_A 201007 100 (last day of 201007 is 20100731. as of 20100731, CSTCNTER_1 belongs to SGMNT_A)
CSTCNTER_1 SGMNT_A 201008 200 (last day of 201008 is 20100831. as of 20100831, CSTCNTER_1 belongs to SGMNT_A)
CSTCNTER_1 SGMNT_B 201009 300 (last day of 201009 is 20100930. as of 20100930, CSTCNTER_1 belongs to SGMNT_B)
CSTCNTER_1 SGMNT_B 201010 400 (last day of 201010 is 20101031. as of 20101031, CSTCNTER_1 belongs to SGMNT_B)
Appreciate any help.
-harithanks for looking into this.
I"ve already turned on SEGMENT as a navigational attribue in cube, for the reason, my current report looks like this.
COSTCENTER Segment MONTH AMOUNT
===============================
CSTCNTER_1 SGMNT_A 201007 100
CSTCNTER_1 SGMNT_A 201008 200
CSTCNTER_1 SGMNT_A 201009 300 I'm expecting this should show up in SGMNT_B
CSTCNTER_1 SGMNT_A 201010 400 I'm expecting this should show up in SGMNT_B
But, I'm expecting the report look like this
COSTCENTER Segment MONTH AMOUNT
===============================
CSTCNTER_1 SGMNT_A 201007 100
CSTCNTER_1 SGMNT_A 201008 200
CSTCNTER_1 SGMNT_B 201009 300
CSTCNTER_1 SGMNT_B 201010 400 -
Navigation attribute behaviour during time dependent master data read
Hi All,
My report is based on infocube. There is one time depenedent master data characteristic named 0EMPLOYEE in the cube.
My report is run for a specific time period. For example Monthly and quaterly level.
There are many infoobject form part of dimension in cube and few are part of navigation attribute folder.
Now in the transformation there are some fields which needs to be read from master data depending upon some time characteristic for ex:-0CALMONTH, 0CALDAY. This rule is mapped correctly and data is also being stored correctly as per the specific time period in the cube.
Now there are some navigation attirbute which reads the data from 0EMPLOYEE master data itself.
My doubt is will navigation attribute read the latest record for the employee or is it intelligent enough to read the right records depending upon specific time char?
With navigation attribute we dont have option to specify any rule as compared to normal objects in transformation.
What will navigation attribute read ? Latest record or speicific records as per time period?
Thanks & Regards,
AnupHi Anup,
Let me give you one small example about time dependent attribute work,
let us say we have 0COSTCENTER as time dependent attribute of 0CUSTOMER. Now in your transaction data you have loaded values of 0CUSTOMER and in the query you have used 0CUSTOMER_COSTCENTER attribute.
Transaction Data,
Tran. no. Customer Number Amount
1 123 500
2 125 450
3 126 900
Master Data:
Customer Cost Center Valid From Valid To
123 COST1 1st Jan 15th Jan
123 COST2 16th Jan 30 March
123 COST3 31st March 30 June
In the above example the data loaded for valid to and valid from has came from source system and for this data you will have direct mapping done in transformation. Now data will reside as above in your system.
When you use Key date as 20th Jan then the cost center for customer 123 in the query will be shown as COST2. So this assignment of time dependent data is done at runtime only and will not have any impact on underlying data.
Regards,
Durgesh. -
Time Dependent Navigational Attributes in Query
Hi,
Location & Job are the Time Dependent Navigational Attributes of an Emp No and
Created a Info Set (outer Join) based on Emp No and DSO....
Created a Query based on the infoset and the Location * Job are Free Chars in the report
In the query property setting entered KEYDATE as 31.12.999
When i executed report and drilldown on Job or location it is displaying me 2 records for each employee one with Blank and the other with information.....
It should display only one record..most recent record avaliable in Emp master data
Where was i doing wrongHi,
Thanks for the update.
I can't do a innerjoin as per my requirment it should be a outer join
Thanks -
hi experts
what are the tables created for time dependent attribute?
and for normal attributes what are table created?
pulihi,
For attributes /BIC/P<Tech name of info object>,Q,X,Y.
P-time independent attributes
Q-time dependent attributes
X - SID links of Charcteristics and Time independent Navigational attribute
Y-SID links of Charcteristics and Time dependent Navigational attribute
Ramesh -
Error activating 0person - Time dependant Nav attribute
Hello,
Theres a Custom made XObj (navigational attribute) for 0person which is <b>time dependant.</b>
I have removed Check for "Time dependant" and saved & activated.But the object became inactive.Again i have placed the check for "Time Dependant" then the object is not getting activated.
Removing of Check for time dependant navigational attribute has created inconsistency in the table.
Now how to over come this ? somebody pls throw light on this ?
How to repair the table ?? and how to analyse the table by comparing the ABAP Dictionary version with the database version ?
Its urgent.
Regards.Hi,
The problem is resolved by myself.
Just follow the instructions provided in the note :408317.
Also observe the instructions in the note:325296 if you observe if theres any conversion lock on your info onject.
Regards
Ellora -
How to lookup time independent navigation attribute of master data table
Hi,
which table is used to lookup time independent navigation attribute (0ACCNT_ASGN) of 0CUST_SALES master data InfoObject. I am seeing too many tables ( P,X,T,H,K...etc.).
Please help me.
Regards
JharnaHi,
FYI,
P-table --- time independent Master data attributes
Q----
time dependent Master data attributes
M-----view of P & Q.
X----
time independent Nav Attributes Master data attributes
Y----
time dependent Nav. Master data attributes
H,K,I tables are related to Hierarchies.
REDDY -
Adding Time Dependency to an Attribute
I have a requirement to report in BI based on the system status of a WBS element at any given point in time. For example, if i run the report with an end date of June 2010, I need to capture the status of any given WBS element (Open, TECO, etc) at that point in time.
Now, I'm aware that I can set the "Time Dependent" flag on the 0STATUSSYS0 attribute of the WBS master data, but what else do I need to do to make this work? Do I need to enhance the extractor to account for this?
Any information/documentation/how-to's would be extremely appreciated.
Thanx in advance,
erHi,
please search the forums, there is a lot of information about this issue. But in short, your extractor needs to deliver the information in time slices giving a from and a to date. In your queries you need to specify a key date to be able to access the appropriate time slice.
regards
Siggi -
Wrong data in cube for time dependent nav attribute
Hi Experts,
I am facing a strange problem.
One of the navigational attr used in one cube was not time dependent before.
Now we have changed it to time dependent.
But after that the cube is fetching wrong data for the nav attr.
In the Master data table (Q table) data is fine.
Kindly suggest.
Regards,
DebjaniHi Debjani,
As Federico said, when you display the content of the cube (or when you execute a query) you enter the reference date on which the time-dependant attribute will be searched. This unique reference date will be used whatever the cube data is.
Ex :if the reference date is 2010/02/14, you will have the time-dep attribute value for 2010/02/14,for 2011 data, 2010 data or whatever.
If you want to change dynamically the reference date depending on a date on the cube, things become a lot more difficult. The only possibility I can think of is "virtual characteristics" (you will find a lot of litterature on the subject on sdn).
Regards,
Fred
Maybe you are looking for
-
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892) This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other
-
If I am playing YOVILLE (a facebook app game) and If I Normalize my window (using win7 on a laptop), the game reloads and looses all progress within the game. Simply normalizing the window should have no effect on the game other than to allow me acce
-
Cant get into BIOS via DEL key, screen goes blank on load RD240
Hello group, having an issue with a RD240 rackmount server attempting to bring it online for the first time. Currently in a one CPU configuration with one stick on RAM in the correct slot, using SAS. When the computer first boots prompting you to hit
-
What is better sky fire or flv for gaming sites
What is better sky fire or flv for gaming sites
-
DNG file not workung with NEF files
Can't detect .NEF files taken from my Nikon D800 E