Navigatonal Attributes
Hi Friends,
Can you please tell me the flow of data retrival from Navigational Attributes in a Query. I mean firstit will access
FACT TABLE-> DIMENSION -> /BIC/XIO_MAT OR
FACT TABLE-> DIMENSION -> /BIC/SIO_MAT -> /BIC/MIO_MAT -> /BIC/SIO_MNM
/BIC/SIO_MNM is a Navigational Attribute.
Thanks.
Karima
hi Karima,
you may try transaction st05, click 'activate trace', then run the query, and from st05 'deactivate trace' then 'display trace'.
or maybe try transaction rsrt with option something 'display sql statement', not sure they are in one sql statement or sequence.
hope this helps.
Similar Messages
-
Help needed on hierarchy in reporting
Hi All,
We have a requirement to create variable selection at the first three node levels of a hierarchy in the report. The user should be given the option to directly enter the customer number instead of selecting the hierarchy node from the drop down.
1
2
3
4
4
2
3
4
3
4
3
2
3
3
The requirement is to have 3 variables in the selection screen
Variable for Node 1, Variable for Node 2 and Variable for Node 3. The user should be able to enter the value directly at any of
the 3 node levels and view the output. I have already checked the option of hierarchy node variables but I am not able to
choose on the node for the variable at each level.
Please provide your suggestions.
Thanks,
BiyazHi,
I would solve this by creating the hierarchy-nodes as navigatonal-attributes to 0customer.
You can set a generic DataSource onto the H-Table and check the proper nodes by programming.
Select the desired hierarchy, check the node level and assign the node to the InfoObject for the node-level.
You only have to take care with link nodes.
Thus you will be able to select in the desired way.
hope that helps
Sven -
Get Attribute values from a page and procedure exception handling?
Hi All,
I have created new page with two input attributes not based on any VO. This page is created to capture two values and pass these to an AM method upon pressing OK button. The method in AM will call a procedure with two in parameter expecting the two values captured from the above said page.
I have two questions, first one how to capture the values entered by the page in the controller class and advises me how to handle exceptions when my procedure fails.
I can not use something like this since this page is not based on a VO
String fromName = (String)vo.getCurrentRow().getAttribute("FromName");
Do I have to create a dummy VO like select '' name1, '' name2 from dual?
Thanks for the help.Hi,
Actually you can capture the parameters on the page like this way
String test = (String)pageContext.getParameter("id of the text input bean");
Now in procedure you can take an out parameter which stores the error messages on exception
and return that out parameter in java.
and then you can throw exception on page using OAException class.
Thanks
Gaurav Sharma -
Encrypted="true" does not encrypt MBean attribute
Hi,
I have developed a Custom Weblogic Security Service Provider. I have also created
an MBean
to manage my provider. One of my MBean attributes is as follows:
<MBeanAttribute
Name = "JdbcPassword"
DisplayMessage = "The JDBC Password to the security database"
Type = "java.lang.String"
Writeable = "true"
Encrypted = "true"
Default = ""password""
/>
I have specified Encryped="true" above, however, the value I put in the Weblogic
Console
is still seen in cleartext in the config.xml. Why isnt it being encrypted? Or
do I misunderstand
the purpose of the Encrypted attribute?
Thanks,
Proneel."Proneel Guptan" <[email protected]> wrote:
>
Hi,
I have developed a Custom Weblogic Security Service Provider. I have
also created
an MBean
to manage my provider. One of my MBean attributes is as follows:
<MBeanAttribute
Name = "JdbcPassword"
DisplayMessage = "The JDBC Password to the security database"
Type = "java.lang.String"
Writeable = "true"
Encrypted = "true"
Default = ""password""
/>
I have specified Encryped="true" above, however, the value I put in the
Weblogic
Console
is still seen in cleartext in the config.xml. Why isnt it being encrypted?
Or
do I misunderstand
the purpose of the Encrypted attribute?
Thanks,
Proneel.Hi Proneel,
Could you please tell me what version of Weblogic are you using?
Thanks,
Carmen -
Not able to open Modal Page through a report attribute link
Dear All,
Not able to open Modal Page through a report attribute link, kindly help me...
I am using skill builders modal page plugin ...
Thanks and Regards,
MadonnaHere's what you have to do.
You set up your column link like this:
Link text: whatever you like
Link attributes: onclick="return false;" class="open_modal"
Target: Page in this application
Page: number of the page you want to open in your modal window
You set up your dynamic action like this:
Event: Click
Selection type: jQuery selector
jQuery selector: .open_modal
(notice the dot at the beginning!)
Action: SkillBuilders Modal Page (2.0.0) [Plug-in]
Event Scope: Dynamic
And finally, in your True Action (SkillBuilders Modal Page (2.0.0)), URL Location should be set as Attribute of Triggering Element.
And that's pretty much all it takes.
Hope this helps. -
How to use attributes from different context nodes in one view?
I am VERY new to the concept of CRM and currently working on creating an alternate version of the BP_HEAD_SEARCH. With help from SAPPRESSs book 'SAP CRM Web Client' i was ble to create my own simple Z-component.
However after going back and forth the book and the forum (including this [article|https://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]) i was not able to find a solution to my problem. My current search uses BuilHeaderAdvancedSearch as context node for searching. But the search should also be able to use attributes from BuilActivity, which is directly related to BuilHeader. I can't seem to find a way to get attributes from BuilActivity into the search window of my component without having to change SAP-Standard.
Is this really the only way? Please advise on possible code and insertion point.Any suggestions?
-
How do I set the mailhost attribute in Messaging Server 3.5?
<B>Intent of the hostname aliases feature: </B><BR>
In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
you want to be able to move a group of users quickly from one Messaging Server to another.
<P>
<B>How to use hostname aliases and how to set mailhost and MessageHostName settings: </B><BR>
Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
/etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
installed.)
<P>
With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
(MessageHostName), and if they match, the server considers the account to be local. <P>
For example: <BR>
MessageHostName=red.company.com,green.company.com,blue.company.com
<BR>where original-host-name is the machine's real name. This entry must come first as the server uses the first
entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.
<P>
In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
be considered local to this machine.
<P>
Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
attribute is recommended.
<P>
In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
server, i.e. host.company.com
<P>
</A>A note about DNS
Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
A 128.101.101.101
CNAME
<P>
Additional MX records are not required to use hostname aliases.
<P>
If you aren't sure about how to configure your DNS records, consult the book <I>DNS and Bind </I> by Paul Albitz and
Cricket Liu.You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]] -
Error while creating Attribute In BPM Object
Hi,
I am getting error while creating attributes in BPM Object.I am not able to open BPm object. while opening I am getting Below error.
Please suggest.
java.lang.StringIndexOutOfBoundsException: String index out of range: 28
at java.lang.String.charAt(Unknown Source)
at fuego.type.TypeFactory.createFromName(TypeFactory.java:482)
at fuego.type.TypeFactory.forNameLazy(TypeFactory.java:263)
at fuego.lang.CollectionTypeDescription.getIndexTypeRef(CollectionTypeDescription.java:146)
at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:355)
at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:344)
at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:106)
at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:94)
at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:78)
at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:612)
at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:605)
at fuego.ui.peer.swt.SwtTable$SwtTableModel.getColumnText(SwtTable.java:956)
at org.eclipse.jface.viewers.TableColumnViewerLabelProvider.update(TableColumnViewerLabelProvider.java:70)
at org.eclipse.jface.viewers.ViewerColumn.refresh(ViewerColumn.java:135)
at org.eclipse.jface.viewers.AbstractTableViewer.doUpdateItem(AbstractTableViewer.java:386)
at org.eclipse.jface.viewers.StructuredViewer$UpdateItemSafeRunnable.run(StructuredViewer.java:466)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:857)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:46)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:199)
at org.eclipse.jface.viewers.StructuredViewer.updateItem(StructuredViewer.java:2026)
at org.eclipse.jface.viewers.AbstractTableViewer.internalRefreshAll(AbstractTableViewer.java:695)
at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:633)
at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620)
at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1433)
at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1368)
at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1330)
at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1431)
at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:536)
at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1390)
at fuego.ui.peer.swt.SwtViewer.repaint(SwtViewer.java:59)
at fuego.ui.peer.swt.SwtColumn.setLabelProvider(SwtColumn.java:89)
at fuego.ui.Column.setLabelProvider(Column.java:82)
at fuego.designer.XObjectComponentStructurePanel.buildUI(XObjectComponentStructurePanel.java:299)
at fuego.designer.AbstractEditor.build(AbstractEditor.java:542)
at fuego.designer.AbstractEditor.init(AbstractEditor.java:133)
at fuego.designer.XObjectComponentStructurePanel.<init>(XObjectComponentStructurePanel.java:126)
at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.createStructurePage(BPMObjectMultipartEditor.java:581)
at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.addDefaultPages(BPMObjectMultipartEditor.java:464)
at fuego.eclipse.studio.multipageeditor.ExtendedMultiPageEditorPart.createPages(ExtendedMultiPageEditorPart.java:399)
at fuego.eclipse.studio.multipageeditor.eclipse.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:253)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:426)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:592)
at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:299)
at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:179)
at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:400)
at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)
at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209)
at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1604)
at org.eclipse.ui.internal.PartStack.add(PartStack.java:499)
at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103)
at org.eclipse.ui.internal.PartStack.add(PartStack.java:485)
at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112)
at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63)
at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:217)
at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:207)
at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:774)
at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:673)
at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:634)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2737)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2651)
at org.eclipse.ui.internal.WorkbenchPage.access$13(WorkbenchPage.java:2643)
at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2595)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2590)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2574)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2557)
at fuego.eclipse.ui.DefaultEditor.open(DefaultEditor.java:65)
at fuego.eclipse.studio.EclipseWorkbench.createEditorFromResource(EclipseWorkbench.java:529)
at fuego.eclipse.studio.EclipseWorkbench.createEditor(EclipseWorkbench.java:297)
at fuego.designer.action.OpenCatalogNodeAction.open(OpenCatalogNodeAction.java:91)
at fuego.designer.action.OpenCatalogNodeAction.run(OpenCatalogNodeAction.java:55)
at fuego.eclipse.ui.EclipseAction.run(EclipseAction.java:180)
at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)When you say you're having trouble "opening" the BPM Object, is it possible you instead mean you're having trouble expanding the BPM Object?
Just a guess, but if you're having trouble expanding the BPM Object I'd suspect that the object's xcdl contents might be corrupted. You might want to consider exporting and saving a backup of the project and then try deleting the object from the Project Navigator. Rebuild the BPM Object once you've deleted it.
Dan -
Using a Variable in HttpService url attribute
I have a dynamic url defined below
public var forecastURL:String = "
http://www.weather.gov/forecasts/xml/SOAP_server/ndfdSOAPclientByDay.php?lat="
+ latitude + "&lon=" + longitude +
"&format=12+hourly&startDate=" + todaysDate +
"&numDays=" + numberDays + ""
I would like to use the var without the {} bind. The compiler
complains if the url is not surrounded in quotes. This should be
simple? How can I use a var within the url attribute without the
bind brackets?
<mx:HTTPService
id="forecastRequest"
url = "{forecastURL}" result="resultHandler(event)"
/>Not Possible..why don't you use the subtitle box instead of help url?
-
Error while adding a attribute to the the Custom view through a wizard
Hi ,
I have created a new custom view with value node through wizard succesfully.
Now I want to add a new attribute to that node.I am trying to do that by a wizard.
But i am getting the follwing error " Error during analysis of Source Code" although i have
commented or removed my all custom code from that view.
I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
"GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
Plz help me with this asap.
Regards,
SharadHi Sharad,
I hope all your classes are active. In case you want to add a new attribute there are two steps.
1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
By using any of the two approaches you will be able to see teh new field in the configuration.
Hope this helps.
Regards,
Ruby. -
Assigning a String Value to the value attribute of html:file
Hi,
we facing a problem while assigning a value to the VALUE attribute of file tag
<html:file property="fileupload" size='25' value="sample.xls" onchange="callsheet()" />
can anyone help me out plzzz,Two points -
1) Java is not Javascript or HTML; you would do better to find a more appropriate forum.
2) When you take this to a better forum, you need to describe the problem. -
Error while genetrating gettter method on Context node attribute
Hi,
I am working in SAP CRM 7.0 Ehp1.Now I need to create get_p_a and set_p_a method
on context node attribute.But while selecting attribute and clicking on right and selecting
on generate P-Getter,getting an error (error message - View not copied or enhanced with wizard; processing not possible).
This is a custom context node attribute and need to create gettter,setter method.
Kindly assist on this or suggest is there any way to create method on required context node attribute.
Regards
VirenHi there,
Creation of Getter Setter is not possible for the AET Generated Views and Components.
It seems your view is generated using AET Table enhancement feature of Ehp1 and the context node is thus a based on a Z BOL object created by a feature of AET of Ehp1
For such context node, generation of getter setters is not possible with right click.
If you need any of GET_ , SET_, GET_P_ or GET_V , then you need to copy the GET_P_XYZ etc method you find on context node class.
Hope this helps
Thanks & Regards
Suchita -
Mis match in attributes of item category B and Blanket PO item details
Hi
I could not able to create a Blanket PO with document type FO and item category B (limit).
Normally for a blanket PO, GR is not allowed and IR is mandatory. So, I could able to see these checkboxes for GR (not set and grayed) and IR (set and grayed) in the item details of the PO in delivery and invoice tabs. But I end with an error message that 'GR is not set is used is not allowed' (exactly i don't remember but some thing like that)
Before creating a blanket PO, I found that in 'attributes of item categories', that for the item category B, GR is set and IR is not set (in customizing-OMH4). Of course, one cannot change the attributes of item categories.
I suppose due to this mis-match in the attributes of item categories and that in the PO, I'm getting an error message while creating a blanket PO and could not able to save.
Also I have checked all the system messages for the message displayed. No where(i.e. in any message class or category and for that message number) I found any such message defined with error in 'attributes of system messages' for purchasing, material master, inventory, invoice verification etc.
I suppose this error message is coming somewhere from the application program for the PO.
So, what can be the solution
waiting for your reply.
thank youThank you for your answer. I haven't mention this point in my thread but I have already tried this.
I have tried matching the GR and IR controls of account assignment category with PO GR, IR controls and also with item category B, GR, IR controls. Still i am getting the same error and could not able to save the PO
Also I have checked the field settings for PO for all categories like transaction relevant, item category relevant, etc in customizing.
Main problem is both GR and IR controls are being grayed in PO. Other wise I could able to change them as per my wish and could able to avoid the error even though the GR and IR controls in PO are correct as per the process requirement.
If possible, please check the GR and IR controls for item category B (in my system it showing that GR is set with binding and IR is not set with binding). But it should be reverse as per the process requirements and in limit PO it is showing correctly. i.e. with GR is not set with binding and IR is set with binding.
thank you -
Mis match in attributes of item category B-limit and PO item details
Hi
I could not able to create a Blanket PO with document type FO and item category B (limit).
Normally for a blanket PO, GR is not allowed and IR is mandatory. So, I could able to see these checkboxes for GR (not set and grayed) and IR (set and grayed) in the item details of the PO in delivery and invoice tabs. But I end with an error message that 'GR is not set is used is not allowed' (exactly i don't remember but some thing like that)
Before creating a blanket PO, I found that in 'attributes of item categories', that for the item category B, GR is set and IR is not set (in customizing-OMH4). Of course, one cannot change the attributes of item categories.
I suppose due to this mis-match in the attributes of item categories and that in the PO, I'm getting an error message while creating a blanket PO and could not able to save.
Also I have checked all the system messages for the message displayed. No where(i.e. in any message class or category and for that message number) I found any such message defined with error in 'attributes of system messages' for purchasing, material master, inventory, invoice verification etc.
I suppose this error message is coming somewhere from the application program for the PO.
So, what can be the solution
waiting for your reply.
thank you
Message was edited by:
srinivas vandanaThank you for your answer. I haven't mention this point in my thread but I have already tried this.
I have tried matching the GR and IR controls of account assignment category with PO GR, IR controls and also with item category B, GR, IR controls. Still i am getting the same error and could not able to save the PO
Also I have checked the field settings for PO for all categories like transaction relevant, item category relevant, etc in customizing.
Main problem is both GR and IR controls are being grayed in PO. Other wise I could able to change them as per my wish and could able to avoid the error even though the GR and IR controls in PO are correct as per the process requirement.
If possible, please check the GR and IR controls for item category B (in my system it showing that GR is set with binding and IR is not set with binding). But it should be reverse as per the process requirements and in limit PO it is showing correctly. i.e. with GR is not set with binding and IR is set with binding.
thank you -
DBSequence type no longer available for entity attributes?
I'm puzzled by this, if not scared.
Every version of JDev till 11.1.1.2.0 has had out-of-the-box support for DBSequence as an entity attribute type.
When you set it for your PK, JDev disables a few options, automatically sets "refresh after insert" (and maybe other stuff) and handles everything about it.
Now, I see that in new applications created with 11.1.1.2.0 that option is no longer present...!
It's available only for apps migrated from previous versions.
If you create a new application, you no longer have DBSequence in the Type dropdown.
Here's what the documentation (Oct 2009 DevGuide, par 4.10.10) says:
In the Edit Attribute dialog, you can set the value of the Type field to the built-in data
type named DBSequence and the primary key will be assigned automatically by the
database sequence. Setting this data type automatically selects the refresh after Insert
checkbox.Where on Earth is this built-in data type named DBSequence in Jdev 11.1.1.2.0?Thanks Paul.
It seems JDev broke my application.
It only shows the native Java types in the dropdown, and does not show any of the Oracle types including Number, DBSequence and all the rest.
(Note that all the connections I work with use the Oracle type map, of course - it's automatic.)
I tried a new quick test with a new application and again, no Oracle types, just the java types.
Then closed and reopened my applications as well as JDev and I can now see all the types in my quick test.
However, my original application still "sees" no Oracle types, it's stuck with the Java types.
I'll try to see if I can repair it in some way... I'll eventually put it down as one of the gazillion one-time bugs that JDev shows daily.
Maybe you are looking for
-
Bit more detail... Mac Book Air has been struggling for space for a while so I bough at time capsule a) for back up and b) to host my itunes folder remotely. This didnt' work. I took it into the Genius bar and the genius there told me that time cap
-
Dear all, I have a problem for writing a query, country: name,code,population. economy:country(code),gdp in the economy table i have gdp of each country, i calculated sum of the GDP of all countries and then half of it(50% of world GDP) then i should
-
Firefox on Win XP resets printer settings each time
I want to print multiple web pages, but each time I need to go into me printer preferences and change the settings. Printer is on a business network. I see: print.save_print_settings = true in my about:config Please help. I have bad carpal tunnel so
-
Developing Application for third-party Java API (jar) libraries
I need some of your inputs on architecting a web based solution to invoke Vantive java API using SAP Netweaver Technology. The API provides methods to connect, insert, update, fetch data from Vantive system using java classes. Pl. let me know which w
-
EXP-00056: ORACLE error 4068 encountered
Hi, I'm doing an export and it shows the following error EXP-00056: ORACLE error 4068 encountered ORA-04068: existing state of packages has been discarded ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errors ORA-06508: PL/SQL: could not find pro