Navigator - failed transfer of Route 66 maps to mi...

Have backed-up the existing card using PC Suite and transfered that to the new ( Sandisk 4mb microsd )card. Then on attempting to transfer the backup made on Route 66 sync I get ......... Access to path 'F:\system\apps\Navigator\Data\imei.dat' is denied !!!
Can anyone help please - I've garnered as much info a poss by googling and with these support pages.

When you say "navigator", you are talking about 6110?
The technical specifications say that the phone supports only 2GBytes. Are you sure your memory is working fine? Have you tried to fill it up?

Similar Messages

  • Can't create correct routes in Maps

    Why is it that when I'm creating a route in Maps, the outcome varies dependent on how I created the route, thus using the same route parameters?
    I've created the same route using different ways of creating the route, and the created route is different every time.
    If I create the route in Maps using the search facility, the route is different if I use an address via the people and contacts interface. And again it is different when using Drive.
    I made the discovery when a suggested route made a 16.2 km de-tour on a 11 km stretch. More than a 100%. I'm now wondering if I dare to use NOKIA maps for my summer trip to Italy from Denmark.
    NOKIA -
    Please make a navigation app where I can define my own waypoints. This is essential in every navigation system.
    Please optimize the app, so I can choose an alternative route - this is basic in most modern navigation systems.
    Honest differences are often a healthy sign of progress. - M. Gandhi

    -Rich
    Thanks for your reply. Sorry for not writing phone model and software release.
    It is a Lumia 920 and I'm using Drive +Beta 2.1.0.1451
    I'm also setting the trip options like fastest / shortest, toll roads etc. In this particular case I'm referring to with, a D-tour of more than 16 km on a stretch of 12 km, it doesn't matter how I set my planning options - I'm getting the same result.
    Being well aware that the program makes some mistakes like this one, it would be nice to be able to plane the route in details by using waypoints. That is not possible at the moment with the present software by NOKIA.
    Honest differences are often a healthy sign of progress. - M. Gandhi
    Attachments:
    wp_ss_20130106_0001.png ‏168 KB

  • Automatic re-route in Maps

    How to re-route navigation easily (should do it automatically) in Maps?
    Scenario:
    1. Set target address and let Maps calculate route. so far, so good
    2. Start driving. As long as you stay "on route",things are ok
    3. You notice that Maps route is not optimal and start driving your own route. Maps does not care..
    4. In order to re-calculate route from your current GPS position to same target address. Maps UI gets very clumsy. First you need clear the map, re-enter the target address (well..luckily it's still in search window), ask to  Maps to re-route. While doing all this, your car is prob. out of the road already..
    Why Maps doesn't re-calculate the route automatically when it detects that the GPS position is well "off-the-route". My friend was using his iPhone 3GS + navigation. It did the thing as expected.
    is this common behaviour of Nokia Maps, or just the N900 version that lags well behind other versions.

    It's just the N900 version that has this "bug", I'm afraid.
    We're all waiting for the full version of OVI Maps to come from Nokia, to give us the same as all their other GPS phones, that gives you a Voice Guidance for Turn by Turn.
    If you can't wait, then try Sygic's effort, which has now just been updated to version 10.  Shame that you have to pay extra for something that Nokia should be providing free to us, like they have done for all the other phones... 
    If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
    If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

  • How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    Hi ,
     Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA  outside interface . 
    Accordingly you can configure NAT 
    HTH
    Sandy . 

  • Strange route in Maps 2.0

    If the map itself is wrong Navteq is the one to blame.
    What if the route that Maps 2.0 creates is totaly bizzare?
    Whos fault is that? Nokia?
    Message Edited by smoketoomuch on 07-Nov-2008 02:14 PM
    Solved!
    Go to Solution.

    LOL, Sight seeing mode?
    I can't say I have ever experienced the U-turn back phenomenon although there is a sharp left turn on one of my regular soutes which the voice instruction calls a u-turn but the map still shows just a sharp left turn.
    With regards to the route through housing estates, Maps calculate routes based on road information provided in the map data. It does not know if a road goes through an estate or not. Perhaps the map data specifies the road through the estate as a major road.

  • BI content -- Transfer rules are not mapping automatically

    Have  any one come across with this issue.
    We have connected R/3 system  to multiple BI systems.
    Eg:  we have 1 ECC6 & 2 BI systems.
    Business Scenario is .
    I have two different Companyu2019s  A & B in two different Network Domains ( Domain 1 & Domain2 ).
    u201C A u201C Have Ecc6 & BI  in the Network Domain1
    u201C B u201C Have ECC6 & BI in the Network Domain2.
    With in the Individual Domain ECC6 & BI is working Fine.
      Issue : -
    When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
    The connection is showing OK.
    Replication is also OK,
    But  BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
    Thanks in Advanceu2026
    @Shaik...
    Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
    any one Advice me ....
    Edited by: shaik on Aug 24, 2008 5:39 PM

    Hi Raghavendra,
    Thanks for Replay,
    Can you explain me how to check the  data mart Connection  ?
    what i am doing is ....
    step 1: Connection is OK.
    step 2 : Replication is OK.
    step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
    Grouping -
    In data flow before.
    source system -
    i check the Ecc6 system which is in different domain.
    then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
    pls Advice....
    @ SHAIK...
    Edited by: shaik on Aug 27, 2008 12:41 PM

  • Routing with Maps and Contacts

    Before 1.1.3 update, I was able to select an address from a contact and use it as source or destination. After installing the 1.1.3 update, nothing gets selected from the contacts while routing with maps.

    Yep...its a glitch of some sort. Go into your contacts and edit the address. Then, select the country from the scroll menu. That should fix it up. Major pain though to do that with every contact for which you have an address.

  • Route Pattern Failing to Next Route List

    Anyone have any ideas regarding a Route Pattern which is failing to the NEXT Route List available? I am running CCM 3.2(2c).
    The Route Pattern looks like 1865.XXXXXXX and fails to the Route List specified. The call completes to the next route list. When I make a route pattern as 1865.6XXXXXX it will fail part of the time. When I make a route pattern as 1865.69XXXXX the call hits the correct Route List every time.
    Thanks

    Try puting the t calling party transform mask on route details of route list.

  • WRT610N - Storage - Password access to router's mapped drive with XP Home

    Is there a way to bypass the Linksys login screen when clicking on the router's mapped drive in XP Home?

    We might have two things being discussed here - 1) changing a password to a existing storage account and 2) the problem of windows storing the user/password for a mapped drive after a reboot.
    I'm struggling with with windows storing the user /password for my mapped drive (the external hardrive plugged into the router's USB).  If I can't figure this out...I might as well return the router?!  I have the "reconnect button" checked and "connect using a different user name" filled out properly. So what's the deal?  Maybe someone from Linksys should address this problem.  It may seem trivial to login every time but it ruins the way iTunes works and I'm guessing other music/photo software applications.  If itunes can't "see" the drive at login it deafults to your "My Document/My Music" directory so everytime you have to manual re-point the library.  I hope I'm clear.  Linksys please help!

  • How do I adjust the route in Maps?

    How do you adjust the route in maps. For example, if I wanted directions from my current location (using the crosshair) to a friend's house 5 miles away, the directions given to me by maps has me travel on a freeway.
    How would I adjust the route to avoid the freeway, take different streets etc? Being able to drag google's route on desktop is invaluable, but seems this feature is missing in iPhone 3g

    I hope someone listens to this suggestion - as it is one of the biggest weaknesses of Maps in its current form.

  • SSO- Connection failed. Make sure user mapping is set correctly and all....

    Hi All...
    I configured SSO Between EP6.0 and BW 3.5...By following this tutorial:
    http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
    every thing is working fine...  when i trying to check the preview for an iveiw (it is invoking BEx in the BW
    System) it is again asking BW System username & Password. I already done user mapping between the
    portal user with the BW user.
    After i reviewd my entire work i got one problem at:
    System Administration --> System configuration --> Portal content --> opened my created system object ->
    Selected Connection Tests --> Select Connection test for Connectors --> Click on Test Button --> Here i
    got the following error :  Retrieval of default alias successful
                                       Connection failed. Make sure user mapping is set correctly and all connection parameters are correct.
    I checked the usermapping area and connector Parameters those all are correct according to the document.
    I was stuck at this place from 4 days please advice me what are the causes for this error
    Best Regards
    Abhi...

    Have you tested the SSO setting by running the program "RSPOR_SETUP"?
    Yes Rajesh I tested by running the program RSPOR_SETUP in BW System.
    It is saying connection is success to communicate with RFC Server.
    The problem is comming from the portal side when i test connector properties for System object.
    But it is saying WEB AS Connection properties are success for System object.
    The exact Error Message is :
    Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
    Best Regards
    Sudhakar A

  • Pass fail script in routing

    Hello,
    Does anybody experience a problem with the standard pass/fail script in routing maintenance? SAP ME Release 5.2.5.5. When I log NC, and I close the NC, the sfc will never loop the pass script.
    In SAP ME release 5.1.3 the SFC will loop the pass script when i close the NC and perform a complete for the SFC.
    Regards,
    Manfred
    Edited by: M. Klomp on Mar 21, 2011 11:18 AM

    Sergiy,
    Thanks for your reply.
    This is the script i'm using for the pass check. It's the standard pass script.
    // Path for SFCs that do not fail
    if(NC_CODE==null) {
      exit (true);
    } else {
      exit(false);
    Where do I have to check whether the SFC is checked for any NC or open NC? Do I have to modify the script? Or do I have to make another customization?
    Regards,
    Manfred
    Edited by: M. Klomp on Mar 21, 2011 11:30 AM
    Edited by: M. Klomp on Mar 21, 2011 11:36 AM

  • HT4053 Does the navigation feature on The new Apple maps use your data allowance?

    Does the navigation feature on The new Apple maps use your data allowance?

    Anybody found an answer to this one yet?

  • Pppoe connection failed.  no route to host

    Hi.
    I'm using airport express for my wifi setup. I'm connected with no problems. The built in ethernet is NOT connected and has an idle status.
    Every now and then, (I'm not sure what triggers it), I would get a popup window saying "PPPoE connection failed. No route to host."
    Note that this would popup even though I am already currently surfing the net and the airport wifi connection is NOT dropped or reset.
    I suspect that this is being triggered by the built in ethernet. Before I switched over to the airport express, I've never encountered this popup.
    Is there some setting I need to configure so that I no longer get this false error message?
    thanks

    Hi.
    I'm using airport express for my wifi setup. I'm connected with no problems. The built in ethernet is NOT connected and has an idle status.
    Every now and then, (I'm not sure what triggers it), I would get a popup window saying "PPPoE connection failed. No route to host."
    Note that this would popup even though I am already currently surfing the net and the airport wifi connection is NOT dropped or reset.
    I suspect that this is being triggered by the built in ethernet. Before I switched over to the airport express, I've never encountered this popup.
    Is there some setting I need to configure so that I no longer get this false error message?
    thanks

  • IMac freezing after start because of failed transfer

    Hello,
    Last night I tried transferring two videos over a network which ended up failing. Not thinking much about it, I just placed those two video files on that local computer to just do a usb transfer this morning. Well, getting to the target computer, I notice something like the picture attached.
    It is like the computer saw the failed transfer and kept trying to do the transfer. Also, mouse is still working. I just cannot use the dock, finder, or any other application.
    I have tried safe booting, this works but obviously you do not want to stay in safe boot. I have repaired the disk and noticed a speed jump in startup which was nice but ultimately did not fix my issue. I have tried restarting (obviously) which did not help my problem.
    Any other ideas? Would love to get this up and rolling for this is my editing machine.
    Thanks for any input you have.

    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Maybe you are looking for