Navigator Not Visible in Directory Manager

On Win XP Pro Oracle Directory service does not start on boot, even though it is set to do so automatically. It will start manually from the Windows services app. After starting the service, oidctl runs successfully from the command line "C:\>oidctl connect=oid90 server=oidldapd instance=3 configset=0 start"
On start up Oracle Directory Manager (ODM) accepts the orcladmin/welcome logon and displays the connecting message and loading schema message. ODM opens but does not display the Navigator panel. ODM seems to be connected to the database because Objects, attributes, entries etc. are visible by selecting choices from the Operations menu.
When OID was first installed the navigator sometimes did and sometimes did not display. Now it is never displayed.
Any suggestions appreciated.

Hi Jay,
I am a Business Analyst and would like to get Oracle Workflow running so I can play with Workflow Builder. I'm just trying to get my hands dirty with this stuff. I want to use OID as a directory server for workflow.
I uninstalled 9.0.1.1 in installed 9.2.x.x. The results are similar.
The Bind request to LDAP failed error re-appeared. I had somehow worked around this on the previous install but I don't know how. The command ldapbind -h trburns -p 389 -D cn=orcladmin -w ohwgwead returns Cant contact ldap server. The error seems to be common as it appears in numerous postings but I havent seen a clearly described explanation and solution.
Do you have access to Oracles knowledge base? It must have a description of this problem.
I can open ODM after the bind failure by clicking the close icon. Double clicking the banner works in cases where the navigator tree is not visible. Many thanks for that tip.
Any authoritative information you could provide about the bind problem would be appreciated.
Thanks again,
Tom

Similar Messages

Firefox Downloads not visible in Download Manager sinze FF 16

Firefox Downloads not visible in Download Manager since FF 16 and now update to 17 still same issue...
check the show downloads and the rest even resting the download folder..

I can see the files while being downloaded only when they are done.. they disappear

Planning application is not visible in calculation manager

Hi,
I'm novice to EPMA.
I have successfully created and deployed an EPMA application,but when i'm unable to see the application(s) under planning node.
As per my knowledge EPMA application by default deployes in calculation manager,if so why the application is not visible.
any suggestions on this r helpful to me
thanks

The issue is resolved now.
The calculation manager service was set to automatic, set it back to manual and restarted calculation manager service.
It showed the application in calc manager.
Regards.
Ace

Printers are not visible in Print management

Installed print server feature in Windows server 2012 .We have added few printers in server, but these printers are not visible in printers section of Print management console.Even the default Microsoft XPS writer is not showing up.
Restarted Spooler service and reinstalled print management console.Server DNS record looks good too.
Able to view the printers in "Device and printers" .They are not visible only in print management console.
Thanks

Hi Daemon_Joker,
Please check if some necessary updates need to be installed. Please run
sfc /scannow command to scan all protected system files.
Meanwhile, please use
Get-Printer PowerShell cmdlet retrieves a list of printers installed on the computer. Did all printers display correctly?
In addition, please open Print Management, click Printer Servers, expand
your printer server, then right click Printers and select “Add Printer…”. Please check if you will be able to find printers via this wizard.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Webcam not visible in Device Manager

Hello,
after a reinstalltion of windows 7 on my HP Pavilion 55SG the Webcam (HP TrueVision HD) is not visible in the device manager. I´ve searched for drivers of it but on the hp page there are none.
I have already installed cyberlinks youcam, but it says there is no webcam on my pc.
Is there any key combination to activate the webcam?
Thanks in advance!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with regards to Webcam of your Notebook
We will surely assist you with this issue
Firstly I would like you to know that the Webcam might indeed be disconnected - it happens. The tiny wires that connect the webcam camera are fragile; they might disconnect, become twisted, or be crushed along the hinge area. The damage can occur at any time, or it may never happen. I have had some notebooks for many years in which the webcam has always remained fully functional. Every notebook is different.
Please click on the below shown link to find the troubleshooting steps to resolve the issue:
http://tinyurl.com/ogcpk9g for Windows 7
http://tinyurl.com/ob747gl for Windows 8
HP Technical Support / Customer Service Phone Numbers:
http://tinyurl.com/nxjotk7
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Data Miner Navigator not visible in SQL developer 3.0.04

Hi ,
I have been trying to complete an OBE turorial on http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/bidw/datamining/ODM11gR2-SetUp.htm?print=preview&imgs=visible
In the Install the Data Miner Repository section the tutor is advising to go to the following option :
From the SQL Developer menu, select View > Data Miner > Data Miner Navigator
In the current SQL developer version i do not see the Data Miner Navigator option.
Any guesses? The pre requisites says Oracle SQL Developer, version 3.0, or later and I am using 3.0.04
Rgds,
Dominic.

Hi Dominic,
Sorry for the late response, I did not notice this posting.
We have a separate forum for data mining: Data Mining
Try to use that in the future so you get a quicker response.
It looks like the OBE course may have a typo or the menu item name was changed
For SQL Dev 3.0 you can display the data miner interfaces in the following way:
The following menu item will make the Data Miner Connections navigator, and all associated viewers (Component Palette, Workflow Jobs, and when necessary Thumbnail, Property Inspector)
Tools->Data Miner -> Make Visible
Go to the following to select just one of the viewers to be made visible:
View->Data Miner->Data Miner Connections
Other options off of the View->Data Miner menu item are: Workflow Jobs, Thumbnail, Property Inspector.
Thanks, Mark

Enabled monitor through override not visible in custom management pack

Hello Everyone,
I've this requirement to enable a monitor which is disabled by default in its source sealed management pack. Using following article; via override; I enable the monitor and place it into a custom unsealed management pack.
https://technet.microsoft.com/en-au/library/hh212818.aspx
Now when I try creating subscription based on that monitor; and select the custom unsealed management pack; that monitor is not listed/available. However, this same monitor which is turned enabled by override; is listed; if its parent sealed management pack
is selected.
Questions:
1) Would selecting this monitor from its sealed management pack; safe to assume this monitor is now enabled?
2) Is this default behavior for monitors turned enabled via override?
Please provide input to this, how an enabled monitor through override can be referenced to be used? Thank you.

1) If the override is done properly, yes, it is enabled. You can check that it is actually enabled by opening the health explorer of an object targeted by this monitor : it should be green/yellow/red instead of blank when it was disabled
2) It is the default behavior. What happens is that you store the override (just a parameter that says "ok, the monitor is now enabled") in the unsealed management pack, not a copy of the actual monitor.

DMS Tab it's not visible in Project Management (PPM 5.0)

Hello Gurus;
I have been active the SAP DMS option in:
SPRO --> SAP Portfolio and Project Management --> Project Management --> Structure --> Define Project Types
And configured the document settings:
SPRO --> SAP Portfolio and Project Management --> Project Management --> Documents -->
Create Status Profile for Documents
Define Object Links for Documents in DMS
Define Object Links for Project Status Reports in DMS
But it isn't visible the DMS tab.
Has anyone fixed this issue?
Best regards,
Mariano

Hi Mariano,
DMS Status Reports tab appears at the level of Structure tab. And SAP DMS is at the level of Basic Data under Structure tab.
Check the application configuration CPROJECTS_FPM under the package DEVELOPMENT_PROJECTS_UI_WD in SE80.
After launching the configurator, check if all the tabs are there for the CPROJECTS_FPM.
Regards
Amit

Deliverable Created in contract not visible in project management

Hi All,
We are using the deliverable tracking system of oracle project contract for creation of requisition of project related items.But those deliverable can not be seen in Project management screen. Is there any way to see these deliverables in project management?
Thanks In Advance
Saptarshi

Hi
By Oracle design there is no link between OKE Deliverables and the Project Management Deliverables.
Those are managed on separate tables.
You may consider customizing the system using API to create a PJT deliverable from an OKE deliverable, maintaining a DFF attribute to see the link between the two entities. My idea is to have something similar to Oracle's solution that creates an event in Projects Billing from a billing event that user creates in OKE.
Dina

Newly created folder not visible in directory tree (Outlook 2013)

We are using Exchange 2007 on-premise and Outlook 2013 on the client computer.
When creating a folder in a (very large) existing folder structure from within Outlook, it is not shown in the client. When logging in onto OWA it is visible.
If we delete the entire client profile and re-create it (causing Outlook to download the entire structure again), the folder is visible.
When creating a new folder after that, the same issue occurs again.

I am assuming you are running in cached mode and this is not a shared mailbox. Have you tried forcing a full client synch? This should force the online version of the folder structure to be recopied to the client. What is happening behind the
scenes is that the client is telling the server to add the folder, but the client's information from the server doesn't yet include the new folder - this is why you see the folder disappear. Once you force the resync, the server will deliver the updated
folder listing (which I've noticed doesn't happen automatically, sometimes), and the client will then see the new folder (again).

ISync Conduit not visible in HotSync Manager Mac OS X 10.5.5 (Leopard)

Hi,
i just bought a Palm Z22 thinking it compatible to iSync (see http://www.apple.com/macosx/features/isync/ ) after my Visor Edge wouldn't sync any more. Now I am experiencing the exact same problem as with the Visor Edge:
I installed Palm Desktop 4.2.2 (shipped with the Z22), I started iSync and clicked "Enable Palm OS Syncing"; iSync told me to start the HotSync Manager and to enable the iSync-Conduit in the Conduit-Manager - problem: The iSync-Conduit does not show up in the Conduit Manager window. However, in the conduit folder (Library/Application Support/Palm HptSync/Conduits) there is a file called "Apple" amongst the other conduit-files.
Please help...?
Post relates to: Palm Z22
Apple MacBook (Intel)
Mac OS X 10.5.5
Palm Z22
Palm Desktop 4.2.2
Message Edited by thd842 on 09-23-2008 09:58 AM
Message Edited by thd842 on 09-23-2008 10:02 AM

Hi,
I have a Tungsteng 5 and I was syncing it with an XP PC. I bought a MacBook with OS X 10.5, I installed Palm Desktop 4.2.1 Rev D for Mac. I have synced once and then I followed the iSync instructions to add the Palm device but I don't see the iSync conduit in the Hosync Manager.
Any idea?
Thanks
Post relates to: Tungsten T5

Firewire disk not visible in Workgroup Manager

I'm setting up an only MAC server for our graphic arts class in our middle school.
The server is a G4 with a small HD, so I have an external Maxtor firewire drive I wanted to use for file storage.
The firewire drive shows up on the server desktop, but not in Workgroup Manager. I've checked for other ways to share the firewire drive, but can't find anything.
Any ideas?
Thanks.....
I want to make a good showing with the MAC server to try and convince the school skepticx.

I can't remember if this is a requirement or not.... (easier to try it than look-up answers in docs sometimes)...
Is the FW drive in MS-DOS format (look at it with Disk Utility). If so, try erasing it in Disk Utility and switch to Mac OS Extended (journaled optional but recommened).
Jeff

Syncronize not visible in Desktop Manager 5.0 on Windows 7

I am running Windows 7 Ultimate (registered version, not beta), My Blackberry Bold is runnning v4.6.0.167 (Platform 4.0.0.217) and I've upgraded to DM 5.0.
Here's the problem ... I'm not able to Synchronize. This is a new post b/c it's not that the DM doesn't see the device -- it's here and the PIN is present. However, the button for Sync is simply MISSING.
Here's the actions I've taken
1) uninstalled, rebooted, reinstalled v. 4.7 (without success of recovering "Sync button").
2) completed a soft, double soft, then hard reset of the device, nothing,
3) completed a MASTER reset of the device -- still no Sync
4) restored from back-up ... but still, neither the DM 5.0 and DM 4.7have the SYNC option on the main page.
What am I missing? Help appreciated!

Frustrated Beginner wrote:
Thanks for your input and efforts to assist. I have resisted removing and replacing, as the 1966 passport photo has a lengthy (approx 60) adjustments showing in the history, as a result of its age. Hence I think that I will just have tolerate these somewhat minor, I suppose, aberrations and just send it off to Blurb as is, as restoring so many old photos to a more presentable print status has taken me 3 months as it is.
I don't understand why this a problem. You are removing a page from the book and adding back again. You are not removing the photo from the catalog, therefore you would not loose you are adjustments. Books are just another way of rendering photos.

Physical Disks in StorEdge 3320 not visible in CLI Manager

Hello,
After installing the CLI manager on Solaris 10 for x86 platforms, I was able to connect the server to the StorEdge array. However, I cannot see the 6 physical disks that are in the array. The LEDs on the physical disks are green, but there is just no communication between them and the CLI manager. Could this be a bad controller card? What else could it be?
DannyMac

Where are you looking for the physical disks?

Navigator Not Visible in Directory Manager

Similar Messages

Maybe you are looking for